Tender For Repairs And Replacement Of Rolling Shutter In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10
Tender Value
49 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
18 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Replacement Of Rolling Shutter In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and as directed. |
| 2 | M&L for false ceiling with 600mmx600mmx4mm thick 'E' board classic of M/S Eternit Everest Ltd or Charminar make as approved by GE, fixed with and including galvanized iron powder coated inverted 'Tee\\" or 'L' sections (concealed GI frame work) of 'Cicage' metallic or equivalent suspended from ceiling with provision of galvanized iron wire 45 mm dia and self tapping screws including butterfly clips, hold down clips for fixing the boards to frame complete all as pe manufacturer's instructions and all as directed including two coats of oil bound distember on one side of the board.(a) Size of Main Tee- 39x24.7x0.8mm(b) Size of Cross Tee- 29x24.7x0.8mm(c) Size of wall angle - 22.2x22.2x0.65mm(d) Butter fly clip(e) Hold down clip(f) Size of grid 1.22mx0.61m(g) Two coats oil bound distemper one side of board(h) Powder coating on exposed side of tee/ angle. |
| 3 | S&F solid PVC wall lining consisting of 5 mm thick wood grain PVC sheet incl of solvent cement and fixing at site on PVC frame as per specification and drawing . |
| 4 | S&F 5 mm thick PVC sheet fillet of width 35 mm thick wall paneling incl of fixing on to shelter make PVC frame as per specification and drawing. |
| 5 | S&F in repairs any size steel rolling shutters 1.25mm thick including top cover, anchoring rod, hasp and staple erection in position as indicated complete, gear operated type with bevel gear box and crank handle including guide rail, hood cover, MS pipe, spring, lock plate and necessary fittings and fixtures including all necesssary arrangements complete all as specified and directed. Note : Painting shall be measured and paid for separately. |
| 6 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 8 | M&L for MS rolled section as in main and cross beams, hip and jack rafters , purlins, where connected to common rafter, post and running rails and guided for sliding doors fixed with angle cleats and other connecting plates complete all as specified. |
| 9 | M&L for framed work as in door or gate of angle or other section, frame work for chajja with gusset plates, cooler stand, rails, braces etc complete drilled for fixing of steel sheeting or other covering and including cutting brick work for hold fast confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding complete all as specified and directed. |
| 10 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and including cutting chasing of wall, complete all as specified and directed. |
| 11 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridges of roof covering/cladding to wall, fixed with self tapping screws as specified |
| 12 | M&L for preparation of new steel surfaces, painting two coats of synthetic enamel paints over a coat of red oxide primer exc 10mm width or girth complete all as specified and directed. |
| 13 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps (as per sample) with rubber ring joints fixed to walls and including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc removal rubbish beyond MOD land complete all as specified and directed. |
| 14 | S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed. |
| 15 | Demolition of brick work/stone bulder measonary built in all quoins, arches, pillars etc or cement lime mortar of any description and in any position all as specified. |
| 16 | M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed. |
| 17 | Description all as per srl item No 16.00 above but except brick. Please Enable Macros to View BoQ information |
| 18 | Description all as per srl item No 16.00 above but except brick. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender