Tender For Provn Of Ors Toilet Near Bldg No T-110, Provn Of Dehumidifier At Bldg No P-192, Iron Grill Cage For Outdoor Unit Of Split Ac , Provn Of Fans Wall Mounted Fan Addl/Altn Inernal Electrification Building No Sm-17 Inside Vijay Durg Under Ge(Vd
Tender Value
44 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
11 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Ors Toilet Near Bldg No T-110, Provn Of Dehumidifier At Bldg No P-192, Iron Grill Cage For Outdoor Unit Of Split Ac , Provn Of Fans Wall Mounted Fan Addl/Altn Inernal Electrification Building No Sm-17 Inside Vijay Durg Under Ge(Vd) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | B/R PORTION Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil. |
| 2 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc. and getting out in soft/ loose soil. |
| 3 | Returning,filling in, including,spreading,levelling,watering and well ramming in layers not exc. 25cm in soft loose soil complete all as specified and directed. |
| 4 | Removing excavated material exc.250 m but n.exc.500 m and depositing where directed. |
| 5 | M&L for hard core of gauge n exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and as directed. |
| 6 | M&L PCC in foundations, filling and mass-concrete type C2 (1:4:8) using 40 mm graded stone aggregate complete all as specified and directed |
| 7 | M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified and directed |
| 8 | M&L for brick work with flyash bricks straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed |
| 9 | M & L for Brick work with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 etc complete all as spd and as directed. |
| 10 | M&L for rendering 15 mm thick built in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) and mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE : Water proofing compound shall be measured and paid separately). |
| 11 | Supply only integral water proofing compound |
| 12 | M&L for RCC type B1 (1:2:4) (nominal mix) using 20 mm graded aggregates in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete complete all as specified and directed.(NOTE: MS reinforcement shall be measured and paid seperately) |
| 13 | M & L for RCC type B1 (1:2:4) (nominal mix) (using 20mm grade stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.(NOTE: MS reinforcement shall be measured and paid seperately) |
| 14 | M&L RCC type B1 (1:2:4) (nominal mix) (using 20mm grade stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.(NOTE: MS reinforcement shall be measured and paid seperately) |
| 15 | M&L RCC type B1 (1:2:4) (nominal mix) using 20 mm graded aggregate in floors Slabs, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed.(NOTE: MS reinforcement shall be measured and paid seperately) |
| 16 | M&L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality |
| 17 | M&L Mild steel TMT bars 6mm and 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality |
| 18 | M&L for Mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for TMT bars complete all as specified and directed. |
| 19 | Use and waste of form work to sides of concrete for foundations, Fottings,bases of cols and Plinth beams and similar work for rough finished surfaces complete all as specified and directed |
| 20 | Use and waste of Formwork to sides of pillars, posts, struts, piers, columns for rough finished surfaces complete all as specified and directed |
| 21 | Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat all as specified and as directed. |
| 22 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 23 | M&L Glazed Ceramic colored tiles of size 600x300x7mm thick in vertical surfaces, set and jointed in cement mortar 10 mm thick 1:4 as backing layer and pointed in white or colured cement to match complete all as specified and directed. |
| 24 | S&F Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. jointed and pointed in neat cement slurry with white or coloured to match including over 15 mm thick screed bed CM 1:6 completed all as directed. |
| 25 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 26 | Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed. |
| 27 | Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed. |
| 28 | S&F CP Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and directed. |
| 29 | Supply, lay and fix 25 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed. |
| 30 | S&F fancy type Chromium plated brass Pillar tap fixed to wash hand basin, complete all as specified and as directed. Make : Ess Ess Cat No.V 301 (Chrome) or equivalent make specified in tender. |
| 31 | S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed. |
| 32 | S&F Towel rail 450mm long of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 170gms) complete all as specified and directed. |
| 33 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 34 | S&F Vitreous china wash hand basin white, flat back, size 550X400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe. All as spd and directed by Engr-in-Charge. |
| 35 | S&F in Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed as specified and directed. |
| 36 | S & F cast floor trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with run lead complete all as specified and directed. |
| 37 | M & L Salt-gauged stoneware gully traps, square or round mouthed, type 'P', size 150x150 mm complete all as specified and directed. |
| 38 | S & F Cast iron (sand cast) soil, waste and vent pipes 100 mm bore of any length with or without ears with cement joints all as specified laid in trenches or in floors complete all as specified and directed. |
| 39 | S & F CI bend 100 mm bore with oval access door.complete all as specified and directed. |
| 40 | S & F plain bend 100 mm bore complete all as specified and directed. |
| 41 | S & F CI branch piece single (equal or unequal) for 100 mm bore pipe complete all as specified and directed. |
| 42 | S&F vitreous china urinals,full stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with grating and union for discharge pipe, including PVC waste pipe 32mm of suitable length, CP waste coupling 32mm dia suitable for urinals, PVC connection 15x 450mm long ,CP urinal spreader,15 mm Angle valve fancy type chromium plated complete all as specified and directed by Engr-in-charge. |
| 43 | S&F Vitreous china squatting pan 'Orissa' pattern ' size 580x440 mm white, with integral foot rest 'P' or 'S' trap,front or back inlet including connection to trap and to flushing pipe,anti syphonage pipe, etc. Complete making good to floor as existing complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F PVC low level flushing cistern valve less,syphonic action type of 10 ltrs capacity white with inlet, ball valve, float and handle incl. cast iron brackets, PVC flush pipe 32mm dia ,PVC connection (15x 450 mm) long, fancy type chromium plated angle valve of 15mm bore dia complete all as specified and directed by Engineer-in-Charge. |
| 45 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 45 x 85-90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 46 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 47 | S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section all as specified and as directed |
| 48 | S&F 125 mm long Aluminium handles, cast type, anodisedcomplete all as specified and as directed by Engineer-in-charge. |
| 49 | S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) |
| 50 | S&F 15mm bore Brass CP angular stopcock concealed type with crutch or butterfly handle complete all as specified and as directed by Engineer-in-Charge. (upto 04 storey High of building) |
| 51 | S&F 1000 lit Rotational moulded polytylene water storage tanks (cylindrical vertical with closed top) three layer construction, ISI marked, provision of tank neeple including dismantling and removing the existing tanks, dismantling and hoisted and fixed in position re-connection of existing pipe lines, complete all as specified and as as ISI approved. |
| 52 | S&F powder coated anodised aluminium doors frame for doors, windows, ventilators and partition with one or more rebates ncluding necessary jointing cleats, glazing clips rubber packing cleat for fixing etc complete all as specified. (upto 04 storey High of building). |
| 53 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. (upto 04 storey High of building). |
| 54 | S&F stainless steel wire cloth, 0.65mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed. (upto 04 storey High of building). |
| 55 | S&F 5.5 mm thick selected quality toughened tinted / frosted glass fixed in aluminium / Upvc beads (beading included with shutter ) or as in hinge door , partition , windows , automatic doors and similar work including cutting to shape , drilling holes as required complete all as specified and as directed. (upto 04 storey High of building). |
| 56 | M&L for rendering 15mm thick on fair faces of brick work or concrete wall surfaces in CM 1:4 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed |
| 57 | M&L for cement concrete 1:3:6 type C-2 in concrete bed to 150mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed. |
| 58 | M&L for 150mm dia bore of reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed. |
| 59 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. |
| 60 | M&L for cement concrete 1:2:4 type B1 using 20mm graded aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and necessary formwork complete all as specified and directed |
| 61 | E/M PORTION Supply and fixing dehumidifier unit of 300 CMH complete with following technical specifications complete all as specified and directed.1. Type of Dehumidifier: Desiccant type table top. 2. Supply of dehumidified air : 300 CMH.3. Power – 230 V / 1 PH /50 Hz4. Dehumidifier equipped with Microprocessor based controlling system having LED Display indicating the status of input.5. Humidistat with digital display.6. CNC fabricated unit with pre-coated MS sheet7. The dehumidifier is having Eco-Dry rotor and totally self-contained.8. The desiccant rotor is manufactured in-house (Made in India)9. Process & reactivation air flow sectors insulated with Aluminum Foils10. The desiccant rotor is made of fluted honeycomb type with stainless steel perimeter flange to incorporate robust internal structure required for industrial quality, durability and easy serviceability and also to extend media and seal life. No wastage of active desiccant wheel media. 11. The desiccant rotor is non-flammable and its media shall have high Performance metal silicates synthesized in situ.12. Differential air pressure switch to control reactivation air flow and indicating clogging of filters13.High temperature thermostat cutout to economize the power consumption. 14.Additional cooling thermostat as a safety measure.15. Electrical interlocking of fan motor, heaters and rotor drive as a safety measure.16.PTFE bonded silicon bulb seal designed to minimize air leakage.17.Dehumidifier has an option to control Reactivation temperature, system parameters.18.Dehumidifier is CE Certified.19.30 years of manufacturing experience with ISO 9001:2015 and ISO14001:2015 certifications.20. 20. Adequate factory trained service engineers in eastern region office to provide prompt after sales service.21. 21. Dimension of Dehumidifier: 740 mm (L) X 540 mm (D) X 445 mm (H).22. Having the facility to show the design performance at controlled lab/ test facility. The facility should have the ability to show rotor performance at the design conditions and also at a few design points representative of the expected conditions to be seen at site during the year / changing ambient conditions. Various aspect at the lab such as configuration, regeneration air flow and temperature, process inlet and out let conditions should be covered at the lab level for witness test.23. Desiccant type dehumidifier Model FFB 300.Unit containing one 360Ø X 100(D) MM. Desiccant rotor nominal process air flow 300CMH.Approx weight of total units 55KG.24. Make : Bry-Air Asia Private Limited or Equivalent model make of Seibu Giken DST, Fisair,i. DESSICA |
| 62 | Note : Ducting includes following items as mentioned below as if any during installation(i) Supply, Installation, Commissioning of 22 CGI sheet ducting complete with gasket, supports, C-joints etc. - 85sqm(ii) Supply, Installation, Commissioning of 24 CGI sheet ducting complete with gasket, supports, C-joints etc. - 100sqm(iii) Supply, fixing of powder coat aluminium discret grill withoit collar damper (1200 x 450), return air grill- 02 nos.(iv) Supply, fixing of powder coat aluminium discret grill withoit collar damper (750 x 150), supply air grill- 09 nos.(v) Supply, fixing of GI collar damper (750 x 150)-09 nos(vi) Supply, fixing of 13mm thick aluminium foil faced XLP duct thermal insulation- 185sqm(vii) Supply , fixing of canvas-02 nos(viii) Supply, fixing of 10mm nitrile acoustic insulation 8ft duct inside of machine face(ix) Duct Laying Cost |
| 63 | The dehumidifier is to be CE Certified as per standard EN 60204-1:2018/IEC 60204-1:2016, EN ISO 12100:2010, IEC 60335-240:2018,EN 61000-6-2:2019, EN61000-6-4:2019, EN 55011:2016, IEC 61000-4-2:2008, IEC 61000-4-4:2012, IEC 61000-4-5: 2014 + AMD1:2017, IEC 61000-4-6:2013 (2006/42/EC) & EMC Directive (2014/30/EU |
| 64 | Supply and install split AC units 230 Volts indoor/outdoor complete with cordless remote control with minimum 5 star rating of capacity 2TR including necessary masonry work for making good distrubuted surface and match with the existing colour complete all as specified. Note :- Copper pipe , insulation and connecting cable will be neasured and paid separately under respective item |
| 65 | Materials and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed. |
| 66 | S & F BLDC ceiling fans of 1200mm sweep with class F copper insulation for winding ,canopy, fan blades and accessories, BEE 5 Star Rated and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 sqmm , 3 core, 1100 Volts grade, from ceiling rose / connector to fan complete all as specified and directed. Make: Havells(Model:Efficiencia DX BLDC,SKU Code-FHCEO5SWHT48)/Atomberg (Model:IKANO)/Crompton(Model:Groove Plus) or equivalent make specified in tender. |
| 67 | S & F BLDC ceiling fans of 1400mm sweep with class F copper insulation for winding, canopy, fan blades and accessories, BEE 5 Star Rated and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 sqmm , 3 core, 1100 Volts grade, from ceiling rose / connector to fan complete all as specified and directed.Make: Havells(Model:Efficiencia NEO BLDC,SKU Code-FHCNF5SWHT56)/Atomberg (Model:EFFICIO)/Crompton(Model:Riviera) or equivalent make specified in tender. |
| 68 | Supply and Fixing Framed work conforming to Fe-290 Gde E-165 as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specifed and directed |
| 69 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specifed and directed. |
| 70 | M&L for in applying two coats of synthetic enamel paint over a coat of red oxide primer including prepration of steel surface of any description not otherwise described over 10cm width or girth complete all as specified and directed by Engr-in-Charge |
| 71 | Taking down cement plaster/ grit plaster/ rough cast plaster on brick or stone walls incl taking out joints hacking for key scrubbing down with water etc complete all as specified |
| 72 | M&L for brick works for 0 .278sqm with subclass \\"B\\" bricks along with following to make good surface in both side of wall as directed by Engr-in-charge: (i) Even and smooth 10mm inside plastering (ii) Even and smooth 20mm outside plastering with water proof compound (iii) Distempering in inside wall with two coat oil bound emulsion along with surface prep,alkali resistant priming paint and 3mm wall putty (iv) Applying two or more weather coat exterior paint with primer at outside wall surface. |
| 73 | Taking out split Ac complete indoor and outdoor unit from any height/ any floor up to four storey building by including pumping down the gas into the compressor by controlling the suction and discharge Valves , disconneting the suction and discharge copper piping and shifting to another location in the same or other building in the complex including refixing of the unit in and including making hole in the wall and making good as per the existing surface or any other civil work required at site and extra copper pipes and existing sizes upto 5 mtr length as per site requirment complete all as specified and directed. Shifting from one place to another place Please Enable Macros to View BoQ information |
| 74 | Taking out split Ac complete indoor and outdoor unit from any height/ any floor up to four storey building by including pumping down the gas into the compressor by controlling the suction and discharge Valves , disconneting the suction and discharge copper piping and shifting to another location in the same or other building in the complex including refixing of the unit in and including making hole in the wall and making good as per the existing surface or any other civil work required at site and extra copper pipes and existing sizes upto 5 mtr length as per site requirment complete all as specified and directed. Shifting from one place to another place Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender