Tender For Repair/Maintenance Of Water Supply Pipeline, Raising Main, Distribution Control System And Allied Works At Domestic Area Af Stn Madh Island And Repair/ Maintenance Of Pump Motors, Starters, Panels And Allied Works At Af Stn Madh Island Und
Tender Value
8.95 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
9 days left
EMD
17900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of Water Supply Pipeline, Raising Main, Distribution Control System And Allied Works At Domestic Area Af Stn Madh Island And Repair/ Maintenance Of Pump Motors, Starters, Panels And Allied Works At Af Stn Madh Island Under Ge (Af) Thane
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 mtr in width and not exceeding 1.5mtr in depth for taking out of pipes/Cable etc and getting out in complete all as specified and directed by Engineer-In-Charge.(a) Soft/Loose soil. |
| 2 | Hard/dense soil |
| 3 | Returining/filling in including spreading/ levelling, watering and well ramming in layors not exceeding 25cm in any type of soil complete all as specified and directed by Engineer-In-Charge. |
| 4 | Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtrs above the starting point complete all as specified and directed by Engineer-In-Charge. |
| 5 | Cleaning of underground Sump/OH Tank/Static Tanks by involving of the followings 08(Eight) stage of cleaning process complete all as specified and directed(i) De-watering by high pressure submersible pump all complete (ii) Removal of sludge from sump(iii) Cleaning of walls, floors, ceiling etc complete(iv) Removing dirt and sludge by vacuum pump(v) Anti- Bacterial Tratment of inside of tank which effective against all pathogens all complete.(vi) Applying one coat of white wash internal surfaces.(vii) Replacenylon net for vent pipes & man hole cover(viii) Writing letter in bold with white paint on black colour back ground such as sump number, capacity, cleaned on Date & Due on Date etc |
| 6 | Note for item No. 5 (i) to 5 (v):- The tendere shall take into consideration for following points while quoting his rate for this item and the unite rate is deemed be included for :- (i) The contractor shall be provide dewatering pump of suitable capacity. The rate is inclusive of rent/hiring charge complete. (ii) Cutting and filling shall be cleared of shrubs, vegetation, grass bush, weed, trees and sapling not exceeding 30 cm in girth, measured at a height of two metre above ground level. Useful material shall be stacked.(iii) Material removed from the tank shall be disposed all as per direction of Engineer-in-charge.(iv) Tank shall be made available for cleaning for a period of 8 hours only and contractor has to arrange sufficient labour/ T&P to complete the job with the given period only. or otherwise penality shall be imposed @ Rs 1000/- per day. |
| 7 | UG sump of 10000 glns capacity |
| 8 | Semi UG sump of 36000 glns Capacity |
| 9 | Semi UG Sump of 40000 glns Capacity |
| 10 | Semi UG sump of 70000 glns Capacity |
| 11 | Static water Tank of 10000 Glns(UG sump ) capaciy. |
| 12 | Dismantling & Taking up or down unserviceable GI tubing of size 100mm dia with all fittings/connections from trenches/ Walls/floors/ ceiling /ground surface etc complete all as specified and directed by Engineer-In-Charge. |
| 13 | All as per item No 11 above but of size 80 mm bore |
| 14 | All as per item No 11 above but of size 50 mm bore |
| 15 | All as per item No 11 above but of size 40 mm bore |
| 16 | All as per item No 11 above but of size 25 mm bore |
| 17 | All as per item No 11 above but of size 20 mm bore |
| 18 | Supplying,laying,connecting and testing of 100 mm bore GI tubing medium grade with and including all fittings such as bends, elbows,tees, Union,short pieces,connectors,check nuts,diminishing pieces ,caps and plugs, unions,etc fixed complete laid in trenches complete all as specified and directed by Engineer-In-Charge. |
| 19 | All as per item No 17 here in before, but of size 80 mm dia |
| 20 | All as per item No 17 here in before, but of size 50 mm dia |
| 21 | All as per item No 17 here in before, but of size 40 mm dia |
| 22 | All as per item No 17 here in before, but of size 25 mm dia |
| 23 | All as per item No 17 here in before, but of size 20 mm dia |
| 24 | M&L in replacement of sluice valve Class PN 1.6 ,150 mm dia complete with flanged joints packing rubber insertion sheet etc including taking out unserviceable sluice valve from existing places complete all as specified and directed by Engineer-In-Charge. |
| 25 | M&L in replacement of sluice valve Class PN 1.6 ,100 mm dia complete with flanged joints packing rubber insertion sheet etc including taking out unserviceable sluice valve from existing places complete all as specified and directed by Engineer-In-Charge. |
| 26 | M&L in replacement of sluice valve Class PN 1.6 ,80 mm dia complete with flanged joints packing rubber insertion sheet etc including taking out unserviceable sluice valve from existing places complete all as specified and directed by Engineer-In-Charge. |
| 27 | S&F in repairs 150 mm bore CI Butter fly Valves complete including nuts bolts washers rubber gasket in place including taking out unserviceable butterfly valve from existing places complete all as specified and directed by Engineer-In-Charge. |
| 28 | All as per item No 28 here in before ,but of size 100 mm bore complete all as specified and directed by Engineer-In-Charge. |
| 29 | All as per item No 28 here in before ,but of size 80 mm bore complete all as specified and directed by Engineer-In-Charge. |
| 30 | S&F in Replacement of 50 mm bore gun - metal glove or gate Valves,with iron Wheel head,Screwed both ends for iron pipe and fixed for GI pipe including taking out unservicable gate valve from existing pipe line complete all as specified and directed by Engineer-In-Charge. |
| 31 | All as per item No 29 here in before, but of size 40 mm dia. |
| 32 | All as per item No 29 here in before, but of size 25 mm dia |
| 33 | All as per item No 29 here in before, but of size 20 mm dia |
| 34 | Supply and fix in replacement foot valve brass heavy duty of size 80 mm dia complete all as specified and directed by Engineer-In-Charge. |
| 35 | Demolation of concrete in ground floor and paving n.exc 15 cm thickness (Below or above ground level) complete all as Specified and directed by the Engineer-In-Charge. |
| 36 | M&L for PCC (1:2:4) type B1 M-15 using 20 mm graded aggregate in floors/pavings etc complete all as Specified and directed by the Engineer-In-Charge. |
| 37 | Material & Labour for dismantling refixing /taking down valve chambers cover of MS plate with angle iron frame of any size fixed in PCC complete all as specified and directed by the Engineer-In-Charge. |
| 38 | M&L for construction of valve chamber of size 1200 mm x1200 x900 mm internal size including necessary earth work ssary earth work and excavation etc in any type of soil PCC (1:3:6) type C-2 in foundation PCC (1:2:4) type B-1 in copping brick wall in cm 1:4, 10mm thick cement plaster (1:3) internally and provision of MS sheet cover 10 guage thick with locking arrangement and pad lock of brags 35mm with triplicate keys, cover fixed to angle iron frame made out of 40mmX40mmX6mm with hinges incl painting of MS cover frame etc with 2 coats for block synthetic enamel paint over a coat of red oxide primer and including taking out unserviceable valve pit chamber complete all as specified and directed by the Engineer-In-Charge. |
| 39 | All as per item No 39 here in before but of size 900 mm x 900 mm x900 mm internal size complete all as specified and as directed by Engineer-in-Charge. |
| 40 | All as per item No 39 here in before but of size 600 mm x 600 mm x600 mm internal size, complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 41 | All as per item No 39 here in before but of size 600 mm x 600 mm x600 mm internal size, complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender