Tender For Construction Of Bathroom (D/S) For Boys At Dg Ncc C Under Ge (East) Delhi Cantt-10
Tender Value
38.36 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
16 days left
EMD
76734
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Bathroom (D/S) For Boys At Dg Ncc C Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc 30cm deep and avaraging 15cm and getting out in soft/ loose soil, complete all as specified and as directed. |
| 2 | Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying cable etc. not exc 10 sqm on plan and not exc 1.5m in depth and getting out in hard dense soil, complete all as specified and as directed. |
| 3 | Description all as per item No 2.00 above but in hard rock, complete all as specified and as directed. |
| 4 | M & L for Plain Cement concrete (1:4:8) Type D2 using in foundations, filling and mass concrete, complete all as specified and as directed. |
| 5 | M&L for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. |
| 6 | Description all as per item No 5.00, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and as directed. |
| 7 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for fair finished flat surface, complete all as specified and as directed. |
| 8 | RCC M-25 design mix (20mm graded aggregates) as in fdn, including raft, footing fdn beams plinth beams bases for columns, complete all as specified and as directed. Note : Structural details shall be provided by the Engr-in-Charge. |
| 9 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and as directed. |
| 10 | RCC M-25 design mix (20mm graded aggregates) as in columns, pillars, piers, posts and struts etc, complete all as specified and as directed. Note : Structural details shall be provided by the Engr-in-Charge. |
| 11 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed. |
| 12 | Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and as directed. |
| 13 | M&L for Approved earth (sand) filling under floors or in foundations including watering and consolidation, complete all as specified and as directed. |
| 14 | Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and as directed. |
| 15 | M&L for 75 mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone agg) as in Sub base to floor finishes, complete all as specified and as directed. |
| 16 | Formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) Flat including fair finish, complete all as specified and as directed. |
| 17 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Flat including fair finish, complete all as specified and as directed. |
| 18 | RCC M-25 (Design mix) as in stairways (except spiral staircases) including steps (square or spandrel), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litre, complete all as specified and as directed. Note : Structural details shall be provided by the Engr-in-Charge. |
| 19 | RCC M-25 (Design mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed. Note : Structural details shall be provided by the Engr-in-Charge. |
| 20 | RCC M-25 (Design mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed. Note : Structural details shall be provided by the Engr-in-Charge. |
| 21 | Formwork to sides and soffits of floor or roof beams, beam hauntings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. |
| 22 | M&L for TMT bar 6mm dia and over up to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. |
| 23 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, complete all as specified and as directed. |
| 24 | Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and as directed. |
| 25 | Formwork to chullah hoods, chajjas, troughs and similar items including edges, Flat surface incl fair finish, complete all as specified and as directed. |
| 26 | Rendering 15mm thick using Cement mortar (1:6) on fair faces of brick work or concrete surfaces finished fair without using extra cement, complete all as specified and as directed. |
| 27 | Rendering 5mm thick using Cement mortar (1:3) concrete surfaces in ceiling, finished even and smooth without using extra cement, complete all as specified and as directed. |
| 28 | Rendering 15mm thick using cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed. |
| 29 | Supply only Liquid water proofing compound |
| 30 | M&L for Ceramic tiles Dark shade 9-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bedding layer in CM 1:6, complete all as specified and as directed. |
| 31 | M&L for Ceramic tiles Dark shade 9-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in riser of steps, skirting, dado and pillar etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick screed bedding layer in CM 1:6, complete all as specified and as directed. |
| 32 | M&L for 16-18mm thick Z Black granite in riser of steps, skirting, dado and pillar etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl backing coat/ rendering in CM 1:4, complete all as specified and as directed. |
| 33 | M&L for cereminc tiles 7 to 8mm thick (square/rectangular) polished, 300X600 as in wall, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl backing coat/ rendering in CM 1:4, complete all as specified and as directed. |
| 34 | M&L for 50 mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate), finished even and smooth without using extra cement in floor, complete all as specified and as directed. |
| 35 | M&L for 2 Coats of OBD over a coat of primer and 2mm thick wall care putty incl preparation of newly plastered surface on walls, complete all as specified and as directed. |
| 36 | M&L for 2 Coats of OBD over a coat of primer and 2mm thick wall care putty incl preparation of newly plastered surface on Ceiling surface, complete all as specified and as directed. |
| 37 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces, complete all as specified and as directed. |
| 38 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Make 'Rajshree/ Black Cobra or equivalent' |
| 39 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibbers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including 3 Nos stainless steel butt hinges of size 100mm, 2 Nos 150mm long stainless steel tower bolt and 01 No 250mm long sliding bolt of all as per direction of Engineer-In-Charge. Make 'Rajshree or equivalent'. |
| 40 | S & F for Stainless Steel work of Grade-304 as in Gates, grills, railing, railing posts (horizontal/ vertical) or any type of other work or in any position, of any type and size including special shaped washers, channels, plates horizontal/ vertical made of hollow tubes or in any other shape as per requirement at site complete all as specified and as directed. |
| 41 | S&F for Stainless steel butt hinges 100 mm long, medium weight, and fixed complete all as specified. |
| 42 | S&F stainless steel sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, complete all as specified and as directed. |
| 43 | S&F for stainless steel, barrel tower of 200mm long bolts of extruded section and fixed, complete all as specified and as directed. |
| 44 | S&F for stainless steel handle cast type anodised,150mm long all as specified and directed. |
| 45 | M&L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and as directed. |
| 46 | M&L for Hard core of borken bricks gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface, complete all as specified and as directed. |
| 47 | M&L for 50 mm thick cement concrete 1:3:6, type C-2 (using 40mm graded stone agg) as in plinth protection finished even and smooth using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3), complete all as specified and as directed. |
| 48 | Providing and fixing mega system nuvo toilet cubicles of following standard dimension which includes 600mm door size in width, made of heat, bacteria, water, chemical, scratch, impact and anti bacterial resistance. 18mm thick solid compact laminate panels finish, The compact laminate should be 'Suede'/ 'Raw silk' which include doors, pilasters and intermediate panels tested by national test house finish with approved texture/ shades as per the site requirment and as per IS 2046. and as per fire retardant BS-476/ 97 standard the product should have Green guard certificate, this also includes providing and fixing in position necessary hardware made out of nylon polymade grade-6 and aluminium powder coated top rail as per manufacturer specifications and architects instructions like 1. doorknob 2) gravity hinges 3) thumb turn lock set indicator 4) aluminum top rail. 5) coat hook. 6) U channels. 7) adjustable foot. 8) noise defeating tape. 9) screw and wall plugs etc. The top fitting should consist of aluminium powder coated top rail which will get fixed with mid & end Pilasters. All screw will be 304 grade in stainless steel and satin finish. Top rail in extruded aluminum will be powder coated or anodized (grade 6063 Micron aluminum) all blusters are supported by grade-6 nylon polymede thermoplastic palm design pedestal footing with non corrosive steel inserts . The base diameter 65 mm and neck diameter of 33 mm anchored to the floor with grade 304 satin finish stainless steel screw with push fit capping at a clearance height of 150mm model Is heat and bacteria resistance polymate in which aluminum U- channel will be used for fixing of intermediate .The size of cubicle with standard dimension of 2025mm height, 1500mm width and 1550mm in depth including 600mm door size. (These cubical will be in a row cosisting minimum 6 cubical in a row) |
| 49 | S&F 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed. |
| 50 | Description all as per item No 49.00 above but 20 mm bore. |
| 51 | S&F white colour Rotational moulded polyethylene water storage tank 2000 litres capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed. |
| 52 | S&F fancy concealed type chromium plated 15 mm dia stop cock/angle cock/ angle cock, cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flinch screwed both ends for iron or for union. |
| 53 | S&F PVC connection 15 mm bore and 45cm long with washers complete all as specified and directed. |
| 54 | S&F fancy type chromium plated wall mixer with 'L' bend, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 55 | S&F Gun-metal globe or gate valves 15mm bore with iron wheel head, screwed both ends for iron complete all as specified and directed. |
| 56 | S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed. |
| 57 | S&F Hubless CI pipes of 100 mm nominal diameter (single socketed in any length with rubber ring joints including all fittings/fixtures fixed on wall or in trenches or in floor complete all as specified and directed. |
| 58 | S&F 100 mm bore CI hubless bends/shoes any radius complete all as specified and directed |
| 59 | S&F UPVC (SWR) 110 mm Nahani trap with grating including jointing to waste pipe in cement concrete complete all as specified and directed. |
| 60 | S&F stack clamps for 100mm pipe made out of 50mmx 5 mm flat iron and 16 mm dia round iron stamp including bolts and nuts and securing ends of stays to walls or roof complete all as specified and directed. |
| 61 | S & F for Precast RCC manhole covers medium duty of size required at site 75 mm thick factory made conforming to IS-12592, complete all as specified and as directed. |
| 62 | M&L for PCC (1:2:4) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, complete all as specified and directed by Engr-in- charge. Complete all as specified and directed. |
| 63 | Extra for forming fair finished drain or channel not exc 90 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. |
| 64 | M&L for cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) in surface channels and drains incl formwork, complete all as specified and directed. |
| 65 | S&F mild steel rungs in manhole drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 Complete all as specified and directed. |
| 66 | M&L for concrete bed to drain pipes laid in trenches incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 all as specified and directed for 150mm bore pipe.Complete all as specified and directed. |
| 67 | M&L for salt galzed stone ware (SGSW) grade 'A' drain pipes 150mm bore laid and jointed on concrete bed complete incl testing complete all as specified and directed. |
| 68 | M&L for rubber moulded glossy finished precast coloured cement concrete tiles 30cmx30cm x 20mm thick, with gray cement and pigments machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished laid over 15mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 69 | S&F rectangular stainless steel drain cover with grating cover 84mm wide of best quality as approved by GE including fixing in CM 1:4 to floor/traps etc complete all as specified and directed. |
| 70 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. (Make: Jaquar/Marc/Kohler/Prayag) |
| 71 | M&L for providing and applying the plaster with single component ready to use repair motar (Smart Care repair motar of Asian Paint or equivalent in FOSROC/SIKA/STP) capable of applying 15 mm average thickness in single layer or finishing with trowel with a bond coat : (SBR polymer @ 10% of cement weight) modified cementious Bond coat @ 2.2 kg cement per sqm including taking down existing roof treatment of any type and also taking down cement plaster on brick / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc. to receive further treatment. completed all as specified and as directed. Note; the application shall be executed on any type of surface and on horizontal/ceiling/vertical area. |
| 72 | M&L for water proofing treatment applying Sikaplan WT 4220 polyolefin flexible homogeneous smooth sheet membrane with a glass fibre reinforcing inlay, WRAS approved for potable water, thermally welded over Sikaplan WT 4300 polyolefin flexible homogeneous smooth sheet membrane with a glass fiber reinforcing inlay, thermally welded over new surface here-in-before at srl item No 42. Ponding test will be carried out by filling 25mm deep water layer on entire surface for a week to check the leakage and corrective measure where required. (Make: SIKA/ FOSROC/STP)Notes: (1) The work shall be executed through authorised appplicatot of manufacturer only.(2) Authorised Applicator shall be approved by GE befor starting the work.(3) All materials shall be produced directly from manufacturer. The purchase voucher shall be produced to the Engineer-in-Cgarge for his verification of material. Engineer-in-Cgarge shall deface the original purchage vouchers.(4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water Proofing treatment for a period of Ten years in favour of GE. A sum equivalent to 2.5% ( Two point five Percent) of the cost of water proofing treatment shall be deem retained by the Govt from the contractor's duues as security deposite. The contractor may, however, furnish a fixed deposite receipt in lieu from a Schedule bank pledged in fevour of Garrison Engineer. |
| 73 | S&F Bathroom Cabinet with Mirror/ABS Bathroom Storage Cabinet/Mirror Cabinet for Wall/ Mirror with Storage for Bathroom of size (355mmx455mm) Make :- Prayag/Polytuf/ Kohler |
| 74 | M & L for Machine pressed precast concrete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-35 Grade laid dry in floor/path including 30mm thick sand cushioning, complete all as specified and as directed |
| 75 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, complete all as specified and as directed. |
| 76 | M&L for point wiring complete with 1.5 Sqmm (nominal area) FRLS-H, PVC insulated un-sheathed and stranded copper conductor cable ISI marked drawing in PVC concealed conduit and PVC conduit fitting including drawing FRLS-H, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size with modular sheet for fixing modular switches/sockets/fan regulator etc complete all as directed. For the following:- |
| 77 | One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push. |
| 78 | One socket outlet point 5 amps on the same board. |
| 79 | One socket outlet point 5 amps on the independent board. |
| 80 | One light point controlled by two 2 way switches |
| 81 | Description all as per Srl Item No 76.00 here-in-before but with 2.5 sq mm FRLS-H copper wire with 2.5 Sqmm FRLS-H copper earth wire for independent point. |
| 82 | Description all as per Srl Item No 76.00 here-in-before but with 4 sq mm FRLS copper wire independent point suitable for Geyser and Air Conditioning with 4 Sqmm FRLS-H copper earth wire for independent point. |
| 83 | S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed by Engineer-in-Charge white/Black/Browncomplete all as specified and directed. Make-Indoasian shynora/ Legrand Artear/ Havells murano/Gold medal Gifa-X9 or equivalent. |
| 84 | S&F Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed by Engineer-in-Charge white/Black/Browncomplete all as specified and directed. Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 85 | S&F Modular switch 16 Amp, 1 way, 1 module size complete all as directed by Engineer-in-Charge white/Black/ Brown complete all as specified and directed. Make-Indoasian shynora/ Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 86 | S&F Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed by Engineer-in-Charge white/Black/Brown complete all as specified and directed. Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 87 | S&F modular switch flush type, IP 20 rated, shrouded terminal 6 amps two way, SP, 230 volts AC all as directed by Engineer-in-Charge white/Black/Brown complete all as specified and directed. Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 88 | S&F Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed. |
| 89 | S & F of LED batten luminaire surface mounted with aluminium housing & PC diffuser, 4 feet system wattage of 20 watts initial lumen maintained CRI>80, Power Factor >0.9, THD<20%, colour temperature-6500K, surge Protection 2.5 KV in CM, IP-20 protected, meets LED IS specified, Class-1, short circuit and over circuit protection, voltage range-140 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiency at luminaire level >120 Lumen/watts and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 90 | S & F of LED batten luminaire surface mounted with aluminium housing & PC diffuser, 2 feet system wattage of 10 watts not less than 1200 lm initial lumen maintained CRI>80, Power Factor >0.9,THD<20%, colour temperature-6500K, surge Protection 2.5 KV in CM, IP-20 protected, meets LED IS specified, Class-1, short circuit and over circuit protection, voltage range-140 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiency at luminaire level >120 Lumen/watts and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 91 | M&L Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 10.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed. |
| 92 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified and as directed. |
| 93 | Supply and fixing of MCCB incommer Distribution Board (Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections, complete all as specified and as directed. Note:- MCCB & MCBs will be measured and paid separately |
| 94 | S&F MCCB 3 Pole, 160 Amp with breaking capacity 16 KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified. |
| 95 | S & F of MCB DB conforming to IP 43-IK 09 with double door, SPN 16 way complete with din rail Neutral and earthing bar after taking out the oldunserviceable DBs connection and making good the disturbed surfaces complete all as specified and as directed. |
| 96 | S&F of MCB SP, B Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed. |
| 97 | S&F of MCB SPN B Curve type, 10 KA,63 Amp, with over load and short circuit protection complete all as directed. Please Enable Macros to View BoQ information |
| 98 | S&F of MCB SPN B Curve type, 10 KA,63 Amp, with over load and short circuit protection complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender