Tender For Repairs To Flooring, Joinery,Roof Tiles, Sanitary Fittings , Cleaning Of Sewage Lines And Periodical Services At installation Dweeprakshak And Androth At Under Ge(Navy) Lakshadweep
Tender Value
29 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
58000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lakshadweep District → Lakshadweep
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Flooring, Joinery,Roof Tiles, Sanitary Fittings , Cleaning Of Sewage Lines And Periodical Services At installation Dweeprakshak And Androth At Under Ge(Navy) Lakshadweep
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | M&L for 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair complete all as specified and as directed. |
| 3 | M&L for 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair complete all as specified and as directed. |
| 4 | M&L for 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair complete all as specified and directed. |
| 5 | M&L for 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement including mixing of water proofing compound complete all as specified and directed (Note: WPC will be measured and paid seperately) |
| 6 | Supply only liquid water proofing compound |
| 7 | M& L for Preparation of new plastered surface of wall and over a coat of wall care putty not less than 1 mm thick and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed. |
| 8 | M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as spd and directed. |
| 9 | M&L three coats of white wash on surface of wall including preparation of new plastered surface complete all as spd and directed. |
| 10 | M&L for preparation old decorated painted surfaces of walls and applying one coat exterior emulsion weather proof paint complete all as specified and directed. |
| 11 | M&L for Complete removal of existing treatment and applying two coats of exterior emulsion weather proof paint over a coat of cement based wall care putty not less than 1mm thick complete all as specified and directed. |
| 12 | M&L for Complete removal of existing treatment and applying for exterior emulsion weather proof paint (Appex Ultima or equivalent) of any colour two coats over a coat primer, over a coat of cement based exterior putty not less than 1mm thick completely all as specified and directed. |
| 13 | M&L applying for exterior emulsion weather proof paint (Appex Ultima or equivalent) of any colour two coats over a coat primer, over a coat of cement based exterior putty not less than 1mm thick on newly plastered wall column projection, chajjas sides etc completely all as specified and directed. |
| 14 | M&L for preparation old decorated painted surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 15 | M&L for preparation old decorated painted surfaces of walls and applying one coat oil bond distumper complete all as specified and directed. |
| 16 | M&L for preparation old decorated painted surfaces of ceiling and applying one coat oil bond distumper complete all as specified and directed. |
| 17 | M&L for preparation old decorated painted surfaces of walls and applying one coat cement base paint complete all as specified and directed. |
| 18 | M&L for one coat of synthetic enamel paint on wooden surfaces including preparation of old surfaces over 10cm width or girth complete all as specified and directed. |
| 19 | M&L for one coat of synthetic enamel paint on steel surfaces including preparation of old surfaces over 10cm width or girth complete all as specified and directed. |
| 20 | M & L for complete removal of exisiting treatment on wall surfaces and applying damp proof coating in three layer treatement by applying first coat of Dr. fixit Dampguard classic followed by a coat of Dr. fixit Dampguard classic putty prepared by mixing 1 part of Damguard classic with 1 part of white cement (OPC) mixed so as to obtain consistency of a putty and finally applying second coat of Dr. fixit Dampguard classic, complete all as per manufacturers instructions, the treated surfaces shall be finished smooth and followed by two coats of distemper oil emulsion over a coat of alkali resistant primer, complete all as specified and directed. Note: Rate quoted is deemed to include for providing 104 Dampguard classic of Make Dr. Fixit completely in three layers including layer of putty, as per manufactures instruction upto the satisfaction of Engineer-in-Charge inorder to obtain desired finish and for arresting dampness completely. |
| 21 | Dismantling of wall and ceiling boards any thickness, including cover fillets, and supply and fixing anodilsed aluminium snap grid(605x605mm) frame work for false ceililng, Supply and fixing of hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I flat 40x3mm size 60mm long and expension hold fasteners 12.5mm dia 40mm long and S&F 12mm thick Gypsum Board (600x600mm) in ceiling including two coat of OBD complete all as specified and directed. |
| 22 | S & F in Repair Aluminium hinges 75mm to the aluminium window by taking down existing aluminium window shutter and refixing the same shutter after replacing of hinges in the same opening upto 3 meter height complete all as specified and directed. |
| 23 | S & F in Repar Aluminium hinges 75mm to the aluminium window by taking down existing aluminium window shutter and refixing the same shutter after replacing of hinges in the same opening from 3 meter to 6 meter height complete all as specified and directed. |
| 24 | S & F in RepairAluminium hinges 75mm to the aluminium window by taking down existing aluminium window shutter and refixing the same shutter after replacing of hinges in the same opening from 6 meter to 9 meter height complete all as specified and directed. |
| 25 | Dismantling of floor, hearth or wall tiling including cement mortar bedding & backing coat and rubbish off the premises complete all as specified and directed. |
| 26 | M & L for virified tiles flooring 09 mm thick(square/rectangular) polished area of each tilels not exc 0.36 sqm (600x600mm) in floors etc set and jointed in net cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in 1:6 CM complete all as specified and directed. |
| 27 | M & L for virified tiles Skirting 09 mm thick(square/rectangular) polished area of each tilels not exc 0.36 sqm (600x600mm) in floors etc set and jointed in net cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 28 | M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectengular) area of each tile exc 0.11 sqm but not exc 0.18 sqm (400x400mm) in floors etc set and jointed in net cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 29 | M&L Glazed ceramic coloured tiles in vertical surface 300x450x7mm/ 300x600x7 mm thick set and jointed in net cement slurry and pointed in white or colour cement to match over 10mm thick cement plaster in CM 1:4 complete all as specified and directed. |
| 30 | M&L for 16-18mm thick polished Granite (of any type) work as a window cill, cooking platform and like in cement mortar (1:4) including poointing in white cement (1:2) using marbel dust wilth admixture of pigment to match shade of granite including and over 15mm thick screed bed in CM 1:4 complete incl dismantling of existing stone complete all as specified and directed. |
| 31 | Taking down old chawkats or frams exc 1.5 sqm but n.exc 4 sqm each without taking off shutters from frame complete all as specified and directed. |
| 32 | M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid , rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 33 | S&F factory made plain framed paneled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure teated complete all as specified and directed. |
| 34 | S&F factory made 35mm thick second class hard wood glazed and skeleton shutters open rebated and prepared to receive glass /gauze etc. edg es of framing plain chamfered or rouonded fitted with with cut and mitred beads for securing glass, wire cloth etc. complete all as specified and directed. |
| 35 | S&F Aluminium alloy wire cloth 0.45 mm nominal dia or wire and average with of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. |
| 36 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling & fixing in opening complete all as specified and directed. |
| 37 | S&F Factory made solid PVC Mouolded door shutter 28 to 30 mm thick(stiles) with 2,4,or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in ferame at site with wood free EPS as per complete all as specified and directed. |
| 38 | S&F 100mm size stainless steel butt hinges complete all as specified and directed. |
| 39 | S&F 100mm size aluminium butt hinges, extruded alumigjum aloy with galvanised mild steèl hinge pin, anodised and fixed, type B-22 complete all as specified and as directed. |
| 40 | S & F 150 mm aluminium , anodised, barrel tower bolt of extruded section complete all as specified and as directed. |
| 41 | S&F 300 mm aluminium alloy , anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 42 | S & F floor door stopper of aluminimum alloy body and tongue,, anodised with hard drawn steel spring fixed in floor, overall length of cover plat 140mm complete all as specified and as directed. |
| 43 | S & F aluminium handles cast type anodised, size of handle 150mm complete all as specified and as directed. |
| 44 | M&L prepapration of new or previously untreated surfaces of wood or wood based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 45 | Taking down old chawkats or frams with shutter(without taking off shutters from frame) n.exc 1.5 sqm each complete all as specified and as directed. |
| 46 | S & F in repairs aluminium alloy , anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed length of bolt 300mm complete all as specified and as directed. |
| 47 | S & F in repairs aluminium handles cast type anodised, size of handle 150mm complete all as specified and as directed. |
| 48 | S & F in repairs floor door stopper of aluminimum alloy body and tongue,, anodised with hard drawn steel spring fixed in floor, overall length of cover plat 140mm complete all as specified and as directed. |
| 49 | S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and avg width of aperture 1.40mm and fixed with stainless steel wire staples and wooden cover fillets complete all as specified and as directed. (Wooden cover fillets shall be measured and paid separately) |
| 50 | S&F in repair 100mm size stainless steel butt hinges complete all as specified and directed. |
| 51 | S&F in repair Aluminium(extruded section body) Door closer hydraulically regulated, designation No. 3 universal type suitable for door shutters of 851 to 1000 mm in width and weith between 61 to 80 kg and fixed complete all as specified and directed. |
| 52 | S&F in repair fancy type angle Stop cock CP cast copper alloy for 15 mm bore pipe , complete all as specified and directed. |
| 53 | S&F in repair fancy type Bib taps cast copper alloy chromium plated for 15 mm bore pipe, complete all as specified and directed. |
| 54 | S & F in repairs for pillar tap 15 mm bore chromium plated screwed down, high pressure screwed for iron pipe complete all as specified and directed. |
| 55 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 56 | S&F in repairs PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed. |
| 57 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 58 | S&F PVC floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified and directed. |
| 59 | S&F 600 x 450mm bevelled edge mirror of selected quality glass 5mm tyhick polished mounted on 6mm thick AC building board fixed to walls complete all as specified and directed. |
| 60 | S&F in repair aluminium powder coated cutrain rod of dia 16 mm colour shade with bracket and decorative ends funnel over door and window fixed with steel screw and aluminium cleat complete all as specified and directed. |
| 61 | M&L providing bond coat in repair by mixing 301 Pidicrete URP (Make: Dr. Fixit from Pidilite Industries) with cement in (1:1) ratio by weight with an overlay of repair mortar by mixing 10%-15% 301 Pidicrete URP (Make: Dr. Fixit from Pidilite Industries) by weight of cement, in CM (1:3) by adding 20% water by weight for workable consistency, forming upto 25 mm thickness of repair plaster (including bond coat and repair mortar) complete as per manufacturers instructions, as in repairs to exposed portion of reinforced concrete after cleaning the damaged RCC surface, breaking of loose concrete, cleaning of reinforcement using Rust remover and the applying anti-corrosive epoxy primer alongwith fixing of chicken wire mesh before applying repair mortar for damaged RCC of cills, chajjas, lintels, shelves, lintels, landing, edges, fins, Fascias, drops of slab/roof projection etc..., for heights upto 3.0 Mtrs above GL and finishing the surface smooth and even, followed by applying exterior wall care putty not less than 1.5 mm thick and two coats of exterior weather proof emulsion over a coat of exterior primer complete all as specified and as directed . Note : Cost of scaffoldings/stagings, formworks, Dr Fixit 301 Pidicrete URP, anticorrosive epoxy primer and chicken mesh are deemed to be included rate qutoed for this item |
| 62 | S & F in repairs PVC water tank cover including hinges in any size of water tank complete all as specified and directed. |
| 63 | S&F in repair vitreous china wash down water closet (pedestal pattern) white with 'P' or 'S' trap front or back inlet complete all as specified and directed. |
| 64 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 65 | M&L 75 mm thick cement concrete 1:3:6 type C1 using 20 mm graded aggregate as in plinth protection finished fair and even with using extra cement complete all as specified and directed. |
| 66 | M&L 100 mm thick plain cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in floor including necessary form work complete all as specified and directed. |
| 67 | M&L 4.8 mm thick sheet glass ordinary quality, glazing with oil putty and glazing pins/spring clips in squares n.exc 0.50 Sqm each including hacking out old broken glass from frame complete all as specified and directed. |
| 68 | M&L 4.8 mm thick figured glass ordinary quality, glazing with oil putty and glazing pins/spring clips in squares n.exc 0.50 Sqm each including hacking out old broken glass from frame complete all as specified and directed. |
| 69 | S&F in repairs 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floors including PCC bed and excavation in any type of soil and dismantling of pipe and bed of existing sewer line complete all as specified and directed. |
| 70 | S&F in repairs 300 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floors including PCC bed and excavation in any type of soil and dismantling of pipe and bed of existing sewer line complete all as specified and directed. |
| 71 | S&F in repairs 200 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floors including PCC bed and excavation in any type of soil and dismantling of pipe and bed of existing sewer line complete all as specified and directed. |
| 72 | S&F in repairs 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floors including PCC bed and excavation in any type of soil and dismantling of pipe and bed of existing sewer line complete all as specified and directed. |
| 73 | S&F in repair 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed on wall including taking down existing rain water pipe complete all as specified and directed. |
| 74 | S&F 110 mm PVC (SWR) bends any radius complete all as specified and directed. |
| 75 | S&F 75 mm PVC (SWR) bends any radius complete all as specified and directed. |
| 76 | S&F PVC (SWR) gully trap 125/110mm setting and jointed with cement solvent complete all as specified and directed. |
| 77 | Dismantling tiling of single layer Mangalore Pattern roof tile laid in cement mortar complete all as specified and as directed. |
| 78 | M & L roof tiles, Mangalore Pattern, interlocking at side, the size of tile shall match with existing tile, including joints laid in cement mortar 1:6 complete all as specified and as directed. |
| 79 | M &L ridge tiles, Mangalore Pattern, set and jointed in CM 1:6 complete all as specified and as directed. |
| 80 | Taking down existing water proofing treatment complete of any description from brick or RCC slab by scraping , roughening surface of old concrete floor by picking, sweeping cleaning by using steel wire brush and washing down with water, fanning dust etc including renmoval of rubbish out side MD land complete all as specified and as directed. |
| 81 | Rendering 10 mm thick in cement mortar 1:3 on roof surfaces finished even and smooth with using extra cement including mixing of water proofing compound complete all as specified and directed Note: WPC will be measured and paid seperately |
| 82 | Supply and laying of APP Modified polymer water proofing membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polster non wove fabric (weight not less than 150gm/sqm) laid on primed surface with 100mm overlap and 150mm end lap including in all vertical surfaces of parapet walls, sealing complete with thermo fushion torch application over tack coat of hot bitumen @ 1.2 kg/sqm, Bitumen grade 85/25 over compatible bitumen primer @ of 0.25 kg/sqm , over and including 10mm thick plaster in CM 1:3 on existing roofing surfaces, including cleaning surfaces and subsequently one coat of hot blown Bitumen grade 85/25 @ 1.2Kg/sqm applied over water proofing membrane and finally one coat of solar reflective bitumnious alluminium paint applied @ 0.10Kg/sqm as surface finish complete all as per manufacturer instructions, all as specified and as directed . |
| 83 | Demolition of brick work / PCC block masonry built in cement mortar complete all as specified and as directed. |
| 84 | M&L pre-cast cement concrete block masonry 1:3:6 type C1 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed. |
| 85 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 86 | M&L PCC 1:4:8 type D2 by by using 40mm graded crushed stone aggregate as in foundations, filling and mass concreting complete all as specified and as directed. |
| 87 | M&L 150 mm thick plain cement concrete 1:1.5:3 type A- 1, (using 20mm graded stone aggregate) as in path/road finished the top surface by brooming including necessary form work complete all as specified and directed. |
| 88 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and as directed. |
| 89 | M&L PCC 1:3:6, type C-2 by using 40mm graded stone aggregate as in surface channels and drains including necessary form work, complete all as specified and as directed. |
| 90 | M&L cement concrete 1:2:4 type B0 byusing 12.5 mm graded stone aggregate in coping, kerbs, benching and the like, including weathering slighthy rounded or chamfered angles and throating as directed including necessary form work complete all as specified and as directed |
| 91 | Demolition of RCC Concrete of any description and in any position not otherwise specifically provided forcement concrete is reinforced (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 92 | M&L Precast reinforced cemeri concrete cover slab 1:2:4 type B1 (20mm graded aggregate) set in cement moprtar 1:4 including necessary form work complete all as specified and as directed . |
| 93 | M& L mild steel TMT CRS bars 10 mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips , including embedding in concrete, as necessary, complete all as specified and directed. |
| 94 | Cleaning of gully traps/ inspection chamber of any size by any means including flushing by water complete all as specified and directed. |
| 95 | Removing the blockage of WC Indian / Europen type, urinal / bath or kitchen traps including cleaning of WC pan / floor traps / Nahani traps and removing blockage of down take pipes up to 1st manholes complete all as specified and as directed . |
| 96 | Pumping out complete water , liquid water and removing / desilting the sludge and cleaning the septic tank complete including plugging the inlet line temporary and diverting the flow into the drain at newly made trench and taking precautionary and safety measures and removing silt to a distance exc 50m but n exc 100 m from the septic tank and burring in pit including provision of pit of required size in any type of soil after spreading line etc for septic tanks of capacity 10 to 25 users complete all as specified and as directed. |
| 97 | All as per item No 68.00 here-in-before but septic tanks of capacity 25 to 50 users complete all as specified and as directed. |
| 98 | Cleaning of blocked sewage line of 150 mm dia bore by rodding from one manhole to next manhole, washing thouroughly with fresh water & removing all sludge at a distance exceeding 100m but not exceeding 200m from the sewage line incuding removing existing manhole covers & refixing properly after cleaning and taking all safety precautions complete all as specified and as directed. |
| 99 | Cleaning of man holes of size 750X750mm to 900 X1200mm including pumping out liquid sludge / waste materials, taking out solid materials from man holes /chambers burrying the debris obtained from the man hole at a distance exc 100 m and n.exc 200m and washing manhole with fresh water including all precautionary and safety measures complete all as specified and directed. |
| 100 | Cleaning of Rainwater harvesting filter beds of size 0.9m x 0.9m x 0.9m and supply and refilling in three layers with 0.2m with hard core (size not exceeding 63mm and exceeding 40mm) and second layer of 0.2m with aggregates (10 to 20mm size) and third layer 0.2 m with washed M sand complete all as specified and as directed. |
| 101 | Cleaning of Rainwater gutter of size 150mm dia at the height upto 3.2m complete all as specified and as directed. Note : Cost of scaffoldings/stagings, safety measures are deemed to be included rate qutoed. |
| 102 | Cleaning of Rainwater gutter of size 150mm dia at the height upto 7.0m complete all as specified and as directed. Note : Cost of scaffoldings/stagings, safety measures are deemed to be included rate qutoed. |
| 103 | Cleaning of Rainwater gutter of size 150mm dia at the height upto 10.0m complete all as specified and as directed. Note : Cost of scaffoldings/stagings, safety measures are deemed to be included rate qutoed. |
| 104 | Cleaning of PVC water storage tank of capacity exc 250 Ltr but n.exc 500 ltr on roof or any position by disconnecting if required ,removing sludge,mud ,brushing ,rubbing and removing of alge if any and washing with bleaching powder and reconnecting /placing at its original position and writing date of cleaning complete all as specified and as directed. |
| 105 | Cleaning of PVC water storage tank of capacity exc 500 Ltr but n.exc 1000 ltr on roof or any position by disconnecting if required ,removing sludge,mud ,brushing ,rubbing and removing of alge if any and washing with bleaching powder and reconnecting /placing at its original position and writing date of cleaning complete all as specified and as directed. |
| 106 | Cleaning of PVC water storage tank of capacity exc 1000 Ltr but n.exc 5000 ltr on roof or any position by disconnecting if required ,removing sludge,mud ,brushing ,rubbing and removing of alge if any and washing with bleaching powder and reconnecting /placing at its original position and writing date of cleaning complete all as specified and as directed. |
| 107 | Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank complete all as specified and as directed. |
| 108 | Rotational moulded polyethlene water storage tanks of capacity 2000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank complete all as specified and as directed. |
| 109 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work masonry and making good disturbed ground complete all as specified and as directed. |
| 110 | Dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 111 | Excavation in post holes (or similar hole) each in hard/dense soil n.exc 0.50 cu m getting out in hard/dense soil including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 112 | M&L reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area not exc 250 sq. cm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed. |
| 113 | M&L PCC 1:3:6 type C2 by by using 40mm graded crushed stone aggregate as in foundations, filling and mass concreting complete all as specified and as directed. |
| 114 | S&F SS wall anchor bolt rust proof size M-10, 70 mm long including necessary drilling in concrete surface for fixing of chain link fencing complete all as specified and as directed. |
| 115 | S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed (each line wire to be measured) |
| 116 | Restraining, resecuring in repair of galvanised steel barbed wire with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed (each line wire to be measured) |
| 117 | S&F PVC coated GI chain link fencing 3mm dia of GI and overall dia 4.5 mm and mesh size 75 mm X 75 mm including provision of binding wire complete all as specified and directed. |
| 118 | M& L mild steel round bars 10 mm dia and over as in chain link fencing complete all as specified and directed. |
| 119 | Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed. |
| 120 | Preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 121 | Preparation of untreated new steel surfaces of any description not exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 122 | S & F Anodised aluminium window and ventilator shutters with powder coated (minimum thickness of powder coating 50 micron) , side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittingsuch as ,Aluminium hines type B-21, 100 mm long (2 Nos) Suitable handle (1 Nos) complete all as specified and as directed. |
| 123 | S &F Powder coated Alumnium frame with minimum thickness of 50 micron powder coating for doors ,windows ,ventilators with one or more rebates including pining cleat for fixing etc, complete all as specified and as directed. |
| 124 | S&F sheet glass 4.8 mm thick ordinary quality and glazing with putty each pane n.exc 0.50 sqm fixed in steel / wooden/aluminium frame complete all as specified and as directed. |
| 125 | Cleaning of open well including removal of sludge to a distance exc 50m but n exc 100 m complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender