Tender For Drilling Of Bore Well Etc At Industrial Estate Wayun.
Tender Value
22.61 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
45220
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Drilling Of Bore Well Etc At Industrial Estate Wayun.
BOQ
| Sl. No. | Item Description |
| 1 | Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800(part 1), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge upto 90 m depth below ground level. All types of soil 300 mm dia Rocky strata including boulders |
| 2 | Supplying, assembling, lowering and fixing in vertical position in bore well, un plasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labor charges, fittings and accessories etc all complete for all depths as per direction 65 mm nominal size dia |
| 3 | Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/medium/coarse in required grading and sizes as per actual requirement all complete as per direction of Engineer |
| 4 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000x450x50 mm reinforced with 8 mm dia four nos longitudinal and 9nos cross sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S flats of size 50mmx1.6mm complete all as per direction of Engineer-in-charge |
| 5 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270 of reputed & approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire &labor charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in charge. 150 mm nominal size dia having minimum wall thickness 5.00 mm |
| 6 | Development to tube well in accordance with IS: 2800(part 1) and IS:11189 to establish maximum rate of usable water yield without sand content ( beyond permissible limit) with required capacity air compressor, running the compressor for required time till well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete including required hire &labor charges of air compressor tools & accessories, etc. all, as per direction of Engineer-in-charge. |
| 7 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe removable as per requirement all complete for bore well of 100 mm dia |
| 8 | Providing and fixing M.S clamp of required dia to the top of casing/ housing pipe of tube well as per IS:2800 (part 1), including necessary bolts & nuts of required size complete 100 mm clamp |
| 9 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS: 2800 (part 1). 100 mm dia |
| 10 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 11 | SITC of 6.0 hp 3phase submerssible pump and motor assembly with started panel of approved make and brand including lowering of pump ,cable connections etc |
| 12 | P/L of 3 phase 10sqmm 3 core copper submerssible fixable cable |
| 13 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) carriages up to site of work complete 65mm dia. nominal bore(medium) |
| 14 | Supply, installation, testing and commissioning of Horizontal pumping unit as per IS 1520 with following specification:- Pump:-Discharge: 29000 LPH Dynamic Head: 36 Meters Type :-Horizontal Split casing Material of constructionImpeller:- Stainless Steel/ Bronze/ CF8M 2.Shaft:- SS4103.Pump casing:- Cast Iron4. Speed :- 2900 rpmThe pump shall confirm to IS-1520 code MOTOR :-A) Type :- Horizontal squirrel cage Induction TypeB) Rating:- Suitable for above parameters/As per OEMC) No of phases: 3 phase 415 V±10%,50Hz ± 3%, AC supplyD) Winding:-Copper wound squirrel cageE) Type of enclosure:-TEFCF) Method of cooling: Air cooled with fan mountedG) Method of Starting: star deltaThe pumping unit should be mounted on a common base frame fabricated out of M.S channel of suitable size and duly fitted with T- type foundation bolts /nuts and washers to make the pumping unit vibration free. The pumping equipment is to be installed on the concrete foundation base with J Bolts. Job includes testing and commissioning of pumping unit on full load at site.Supply, installation, testing and commissioning of Horizontal pumping unit as per IS 1520 with followingspecification:- Pump:-Discharge: 29000 LPH Dynamic Head: 36 Meters 1.Type :- Horizontal Split casing Material of construction1.Impeller:- Stainless Steel/ Bronze/ CF8M 2.Shaft:- Stainless steel3.Pump casing:- Cast Iron4. Speed :- 1450 rpmMOTOR :-A) Type :- Horizontal Induction TypeB) Rating:- Suitable for above parameters/As per OEMC) No of phases: 3 phase 415 V±10%,50Hz ± 3%, AC supplyD) Winding:-Copper wound E) Type of enclosure:-TEFC/SPDP/as per OEMF) Method of cooling: Air cooled with fan mountedG) Method of Starting: star delta/as per OEM |
| 15 | Supply,installation,testing and commissioning of 3 phase energy meter complete with connection as required |
| 16 | Supplying and installation testing and commissioning of following mccb,sa)10 to 32 amp mcbSp |
| 17 | b)40 to 63 amp DP |
| 18 | Supplying installation testing and commissioning of change over of approved make |
| 19 | Earth work in bulk excavation by mechanical means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge All kinds of soil : |
| 20 | Providing and Laying of stone soiling hand packed including carriage,levelling,consolidating and ramming |
| 21 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 22 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work upto plinth level in 1:2:4 mix using 20mm N/size using crushed aggregate including all carriages upto site of work complete |
| 23 | Providing and laying in position reinforced cement concrete of specified grade excluding the cost of centering and shuttering-all work upto plinth level in 1:1.5:3 mix using 20mm N/size using crushed aggregate including all carriages upto site of work complete |
| 24 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form work for: a a)Foundations, footings, columns |
| 26 | 15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand |
| 27 | P/F structural steel work including, cutting, wielding and placing in position |
| 28 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge. Made of G.I. wire of dia 4 mm |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint or wooden based primer of approved brand and manufacture |
| 30 | Supply and Fixing of Razor Concertina wire (crossed spiral coils) made of high tensile stainless steel Razor wire/sheet |
| 31 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. for gates |
| 32 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. |
| 33 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) above superstructure |
| 34 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone Quarry. |
| 35 | Distempering with exterior emulsion distemper of approved brand and manufacture to give an even shade on New work (two or more coats) |
| 36 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes |
| 37 | P/f of sanitary fitting a) Wall mixer(cera,hindware) |
| 38 | b) Gyser 50 ltr venus,Crompton |
| 39 | c) Angle valve(cera,hindware) |
| 40 | d) C.P. connection |
| 41 | e) Soap case |
| 42 | f) Towel rod |
| 43 | g) Mirror |
| 44 | h) Wash basin with pedestrial (cera,hindware) |
| 45 | i) Sink mixer (cera,hindware) |
| 46 | j) Water closet (cera,hindware) With cistern all fitting |
| 47 | l) PPR 35MM (pipes) |
| 48 | m) PPR 25MM |
| 49 | n) PVC 4” |
| 50 | o) Pvc 3” |
| 51 | p) P-trap4” |
| 52 | q) Elbow 4” |
| 53 | r) Tee 4” |
| 54 | s) P-trap3” |
| 55 | t) Elbow 3” |
| 56 | u) Tee 3” |
| 57 | v) collar |
| 58 | w) grating |
| 59 | x) main hole of size 3’.0x2.0of brick masonry main hole with cover complete job |
| 60 | y) Waste coupling |
| 61 | z) Waste pipe |
| 62 | aa) PVC water storage tank(5 layer) |
| 63 | Wiring for the following light points with 1.5Sqmm PVC insulated copper conductor 1100 volts grade standard flexible FRLS wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 Amp single pole rocker operated flush mounted switch of approved quality, color make and design in 1.6mm thick GI box and earthing of fixtures and the outlet box with 1.5sqmm PVC insulated copper conductor stranded flexible FRLS wire.a). One light controlled by 6 Amp Switch . |
| 64 | Wiring for 250 volts single phase and neutral 16 Amps switched socket outlet with 4 Sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or Surface mounted 25mm dia 2mm thick PVC conduit including providing and fixing of 16 Amps 3 pin switched socket of approved make and design in 1.6mm thick G1 boxes with grid plates and earthing the third pin of socket outlet with 4 Sq.mm PVC insulated copper conductor stranded flexible FRLS wire. |
| 65 | Supplying installation testing and commissioning of 8 watt slim round LED light of approved make complete fitting as required. |
| 66 | Supplying installation testing and commissioning of industrial socket with 16 to 32 Amp double pole MCB |
| 67 | Wiring for ceiling/wall Fan points same as above in item No 1. but controlled by electronic stepped regulator 200 watts and 5A control switch and 15mm dia circular or hexagonal in 1.6mm thick MS zinc passivity sheet steel body and 12mm dia MS bar hook complete with white ,3mm thick 200mm dia laminated circular cover |
| 68 | Supplying installation testing and commissioning of exhaust fan complete connection as required |
| 69 | Supplying installation testing and commissioning of celling fan Crompton Usha or equalent make. |
| 70 | supply installation testing and commissioning of 50 Ltr water Geyser of approved make complete as required(venus/recold/Jaqura) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender