Tender For Water Supply Distribution System For New Units At Industrial Estate Zainakote.
Tender Value
9.16 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
18320
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Water Supply Distribution System For New Units At Industrial Estate Zainakote.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: Ordinary Rock |
| 2 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) carriages up to site of work complete a) 50 mm dia. nominal bore(medium) |
| 3 | b) 25 mm dia. nominal bore (medium) |
| 4 | P/F of G.I fitting a)Union 50 mm |
| 5 | b) Union 25 mm |
| 6 | c) Socket 50mm |
| 7 | d) Socket25mm |
| 8 | e) Tee 50mm |
| 9 | f) Gate valve 100mm |
| 10 | g) Elbow 50mm |
| 11 | h) Nipple25mm |
| 12 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m |
| 13 | Supplying /filling dry stone soling tightly hand packed under foundation & under floors including all leads, lifts and all carriages up to site of work complete |
| 14 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) carriages up to site of work complete |
| 15 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) carriages up to site of work complete |
| 16 | P/L in position reinforced cement concrete of specified grade 1:1.5:3mix using 20mm N/size agg. excluding cost & including all carriage up to site of work complete job. |
| 17 | Reinforcement for RCC work using TMT bars as required including cutting, hoisting and fixing in position complete. Thermo-Mechanically treated bars. |
| 18 | Centering and shuttering including strutting, propping using water proof ply board and removal of form work for foundation with all carriage up to site of work complete job. |
| 19 | Providing, laying, spreading of GSB filling including ramming, watering, consolidation and all carriage upto site, complete job. |
| 20 | P/L of 3 phase 10sqmm 3 core copper submersible fixable cable |
| 21 | P/L of 3 phase 50sqmm 4 core copper fixable cable from main to starter panel |
| 22 | SITC 30 KVA servo voltage stabilizer voltage range for 120-460 with 200 A AL bus BAR with main switch. Oil cooled with copper winding, MS sheet body, prime grade power coating, driven type motor insulation-class A, greater than 6 mega ohms microprocessor based digital control panel including all civil works complete |
| 23 | Supply, installation, testing and commissioning of Horizontal pumping unit as per IS 1520 with following specification: - Pump:-Discharge: 29000 LPH Dynamic Head: 36 Meters 1. Type:- Horizontal Split casing Material of construction1.Impeller: - Stainless Steel/ Bronze/ CF8M ,Shaft:- SS410Pump casing: - Cast Iron,Speed :- 2900 rpmThe pump shall confirm to IS-1520 code MOTOR:-A) Type:- Horizontal squirrel cage Induction Type, Rating: - Suitable for above parameters/As per OEM,No of phases: 3 phase 415 V±10%,50Hz ± 3%, AC supply, Winding:-Copper wound squirrel cage,Type of enclosure:-TEFC, Method of cooling: Air cooled with fan mounted, Method of Starting: star deltaThe pumping unit should be mounted on acommon base frame fabricated out of M.S channel of suitable size and duly fitted with T- type foundation bolts /nuts and washers to make the pumping unit vibration free. The pumping equipment is to be installed on the concrete foundation base with J Bolts. Job includes testing and commissioning of pumping unit on full load at site.Supply, installation, testing and commissioning of Horizontal pumping unit as per IS 1520 with following specification:-Pump:-Discharge: 29000 LPH Dynamic Head: 36 Meters ,Type :- Horizontal Split casing, Material of construction, Impeller:- Stainless Steel/ Bronze/ CF8M ,Shaft:- Stainless steel, Pump casing:- Cast Iron,Speed :- 1450 rpmMOTOR :-Type :- Horizontal Induction Type,Rating:- Suitable for above parameters/As per OEM,No of phases: 3 phase 415 V±10%,50Hz ± 3%, AC supply, Winding:-Copper wound ,Type of enclosure:-TEFC/SPDP/as per OEMF) Method of cooling: Air cooled with fan mounted, Method of Starting: star delta/as per OEMThe pumping unit should be mounted on acommon base frame fabricated out of M.S channel of suitable size and duly fitted with T- type foundation bolts /nuts and washers to make the pumping unit vibration free. The pumping equipment is to be installed on the concrete foundation base with J Bolts. Job includes testing and commissioning of pumping unit on full load at site. Complete job Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender