Tender For Proposed New Opd Block Augmented From The Existing New Pg Blocks At S.N.M. Medical College, Dhanbad
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Sep 2026
9 days left
EMD
23.55 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed New Opd Block Augmented From The Existing New Pg Blocks At S.N.M. Medical College, Dhanbad
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. |
| 2 | Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. |
| 3 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 4 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. |
| 5 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 6 | Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. |
| 7 | Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener. |
| 8 | Rebaring - Chemical-Supply and application of Lokfix E77, a heavy duty, two-component epoxy anchoring chemical, provided in 3:1 ratio side-by-side cartridges with a static mixer nozzle. Upon application, it sets and cures to securely anchor various steel fixings into concrete and solid masonry substrates. It is a pure epoxy chemical anchor grout with ETA approval from DIBt for diameters ranging from 8 mm to 40 mm at specified embedment depths, as per manufacturer's specifications. The epoxy chemical must have a working life period certified for 100 years as per ETA from DIBt, with properties including fire resistance tested to withstand 120 minutes (DIN EN 1363-1:2012, Technical Report TR 020), and must have water tightness certificate for \\"0\\" mm under 5 bar water pressure (EN 12390-8:2019). ETA approval from DIBt for Diamond Drilling is required, alongside LEED certification and compliance with LEED V4 standards (ISO 16000, EN 16516, CDPH 01350, ASTM D2369, EPA method 24). It should compilance with European approval to EAD 330499-01-0601, anchoring in cracked and un-cracked concrete, includes fire testing to 120 minutes and C1 & C2 seismic approval. It shuould have compressive strength >110MPa (EN196-1) and flexural strength >60MPa (EN196-1). Rates shall encompass labor, tools and plants for power drilling in concrete, epoxy cartridges, plastic nozzles, and complete drilling holes with dust removal by air blowing. Cost of providing, cutting, bending of rebar steel shall be paid separately as per approved item. |
| 9 | Rebar 8 mm Dia x 12 mm holes dia x 120 mm depth |
| 10 | Rebar 10 mm Dia x 14 mm holes dia x 150 mm depth |
| 11 | Rebar 12 mm Dia x 16 mm holes dia x 180 mm depth |
| 12 | Rebar 16 mm Dia x 20 mm holes dia x 240 mm depth |
| 13 | Rebar 20 mm Dia x 24 mm holes dia x 300 mm depth |
| 14 | Providing core cutting in reinforced cement concrete (RCC) using diamond-tipped core drill machine to required diameter and depth for pipes, cables, or ducts, including disposal of debris and cleaning the site. |
| 15 | 100mm dia |
| 16 | 150mm dia |
| 17 | \\"Providing and applying bond coat on the prepared surface with two component epoxy based bonding coat Nitobond EP of Fosroc make or equivalent, having specific gravity 1.15 to 1.2 gm/cc, Compressive strength(BS 6319 Pt.2)- 50 Mpa at 7 days, Flexural strength strength(BS 6319 Pt.3)- 35 Mpa at 7 days, Tensile strength (BS 6319 Pt.7)- 20 Mpa at 7 days, Shear Strength (BS 6319 Pt.4)- 10 Mpa at 7 days, having an over lay time of 6 hrs and 30 ̊C.\\" |
| 18 | EARTH WORK |
| 19 | Earth Work in excavation in Foundation Trenches in Ordinary soil (vide classification of soil item -B) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I |
| 20 | Extra for earth work in hard soil as per specification & direction of engineer in charge (Vide classification of soil item B) |
| 21 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock |
| 22 | Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 23 | Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer In charge |
| 24 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm diameter holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor. With Chlorpyriphos EC 20% with 1% concentration |
| 25 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 26 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 27 | CONCRETE WORK |
| 28 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size if required for plinth area |
| 29 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soff 40 mm thick |
| 30 | Providing and laying in position cement concete of soecified grade excluding the cost of centering and shuttering - All work up tp plinth level 1:4:8 (1 cement :4 coarse sand (Zone -III) :8 graded stone aggregrate 40 mm normial size) |
| 31 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.10% |
| 32 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. |
| 33 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.) For Grading -II Material |
| 34 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge. |
| 35 | 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. |
| 36 | REINFORCED CEMENT CONCRETE WORK |
| 37 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, cement content as per approved design mix, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. NOTE- (1) Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. |
| 38 | All works upto plinth level |
| 39 | All works above plinth level upto floor V level |
| 40 | Add for using extra cement in the items of design mix over and above the specified cement content therein. |
| 41 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases for columns, etc for mass concrete |
| 42 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 43 | Suspended floors, roofs, landings, balconies and access platform. |
| 44 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 45 | Columns, Pillars, Piers, abutments, Posts and struts |
| 46 | Providing Tor steel reinforcement of 8mm. dia.TMT rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (TMT Fe 500 (only vailid for TATA (TISCON), SAIL, JSPL, Electro steel Limited Bokaro and Vizal steel(RINL)) |
| 47 | Providing Tor steel reinforcement of 10mm,28/32mm dia. TMT rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (TMT Fe 500 (only vailid for TATA (TISCON), SAIL, JSPL, Electro steel Limited Bokaro and Vizal steel(RINL)) |
| 48 | Providing Tor steel reinforcement of 12/16mm. & 20/25mm. dia. TMT rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (TMT Fe 500 (only vailid for TATA (TISCON), SAIL, JSPL, Electro steel Limited Bokaro and Vizal steel(RINL)) |
| 49 | BRICK WORK |
| 50 | Providing designation 75 B brickwork in C M ('1 :6 ) in foundation and Plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing. taxes and royalty all complete as per building specification and direction of E/l. |
| 51 | Providing designation 100A brick work with flyash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:4) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints costs of screening materials, scaffolding, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I. |
| 52 | Providing Designation 100A B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9\\"x4.5\\"x3\\") in cement mortar (1:6) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 53 | Providing designation 112mm thick reinforced designation 100A brick work with flyash lime brick (FLAG) in (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 54 | Extra for providing & placing in position 2 no 6mm dia ms bar every 3rd corse of half brick masonary |
| 55 | Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means |
| 56 | WOOD WORK |
| 57 | Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I. |
| 58 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 59 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side |
| 60 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 61 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.50 mm thickness |
| 62 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width |
| 63 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
| 64 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied withspecial grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in requiredproportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 65 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make without oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 66 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.9.127.2 1.0 mm thick |
| 67 | Supplying, fitting and fixing 35mm thick solid core type non-decorative double leaf flush shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make without oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 68 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured). |
| 69 | Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : Rectangular or square. |
| 70 | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 35 mm thick shutters- Second class teak wood with ISI marked M.S. pressed butt hinges bright finished of required size |
| 71 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 72 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm |
| 73 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade wiIh necessary screws etc. complete 125 mm |
| 74 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete Twin rubber stopper |
| 75 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : |
| 76 | Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. |
| 77 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Polyester Powder coated minimum thickness 50 micron aluminium. |
| 78 | Providing and fixing S.S. sliding door bolts (aldrop) with nuts and screws etc. complete: 250x16mm |
| 79 | Providing and fixing SS sliding tower bolt with required fastners (Screws) complete: 250x10 mm |
| 80 | Providing and fixing SS hanging floor door stopper with necessary screws etc.complete: 150 mm Rubber Stopper |
| 81 | Providing and fixing SS sliding baby latch with required fastners (Screws) complete: 100 x 10 mm |
| 82 | Providing & Fixing Wall mounted door Buffer |
| 83 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness.The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat . Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame |
| 84 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. |
| 85 | Providing and fixing in position collapsible steel shutters with vertical channels 20x1 0x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 86 | Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet (Zinc coating not less than 120 gm/sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The frame shall be filled with mineral wool Insulation having density minimum 96Kg/sqm. The frame will have a provision of G.I. anchor fastners 14 nos (5 each on vertical style & 4 on horizontal style of size M10 x 80) suitable for fixing in the opening along with factory made template for SS ball bearing hinges of size 100x89x3 mm for fixing of fire rated glazed shutter. The frame shall be finished with an approved fire resistant primer or powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- Charge. (Cost of SS ball bearing hinges is excluded). |
| 87 | Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/ m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (paneling to be paid for separately). |
| 88 | Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. |
| 89 | Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-Charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (El20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & El. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredited labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm. |
| 90 | P/F lead lined door, the frame for the door is second class teak wood (ivory cost ) properly seasoned wood of section 100*60mm with a coat of viper make primer and paint. 44mm thick doors shutter are made out of 34mm thick BWP grade board door shutter sandwiching 2mm thick lead sheet of radiation control, 6 mm thick commercial ply and 1mm thick laminate in shuede finish on both the faces of shutter lead lining to be done for frame and shutter both with 2mm thick lead sheet of radiation control. The frames are fitted in masonary opening with the help of anchor fastners of Hilti/Ficher make of size 10*100/10*120mm. Hardware for the doors are inclusive and includes - stainless steel SS ball bearing hinges 100*75*3 mm of beaker of equivalent make, Dead lock with both side key opration of Becker or equivalent make back to back D handels of size 19*300 mm stainless steel grade of Becker or equivalent make, Face mounted Tower bolt 300 mm long of Becker or equivalent make, face mounted door closer of Becker or equivalent make, all work is being carried out under the direction of Engineer in charge. |
| 91 | P/F 8mm thick lead lined glass for lead lined doors with complete beading and screws as per the direction of Engineer in charge. |
| 92 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness |
| 93 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 94 | Supply and installation of 4mm thick Aluminium Composite Panel shall consist top and bottom Aluminium Sheet of 0.5mm thickness of Aluminium Alloy AA3105 grade H 14 temper passing EN 485-2. The top sheet shall be coated with PVDF/FEVE coat by continuous coil coating process and shall be of 25 - 28micron thickness passing AAMA 2605 standard and has 15-year warranty. The bottom Aluminium sheet shall have service coat. The 3mm thick core shall be of FR mineral and the ACP shall be Factory Process Certified for FR in accordance to DIN 4102 Class B1. The Aluminium Composite Panel shall be supplied from the certified unit. The weight of the ACP Panel shall not be less than 7.3 Kg/Sqm. |
| 95 | Providing and Fixing roller blind with head channel, traversing cord, and warranty etc as per manufacturer's specifications. Fabric sample to be as instructed and approved by Architect.Providing and fixing Roller Blinds as per the approved sample comprising of sunscreen Fabric comprising of 30% polyester and 70% PVC with openess factor of 5% having a width of 250-300 cm.Fabric weight 428±5% Grams per sqm, Thickness 0.73 mm ±5%, GREENGUARD NFPA701 ceritified fabric. Healty/safety standard - Oekotex Standard 100 and it provides UV protection upto 95%.The fabric has mechanical breaking resistance – warp≥ 1310 N/5cm, Weft: > 1420 N/5cm. Color fastnes to Light Grade 8.The Roller blind system consists of 38mm OD extruded out of Aluminium alloy 6063 T6 with silver anodized to provide an everlasting finish and luster, the rotary unit shall be 36mm in OD incorporating a clutch mechanism composed of low – flexing braided polyster cord with nylon core, Control Ball chain shall be composed of braided nylon cord (2mm dia) with high engineering grade plastic beads of 4.5mm diameter mounted co-axially on the cord with a pitch of 6.2mm (C-T-C) Bottom rail should be powder coated Aluminium flat bottom rail of 290 gm to finish it from the ends it should have rail end caps. The clutch will be at the tube. The return end cap bracket shall incorporate snap spring design to facilitate easy installation and removal for maintenance activities. The bracket shall be finished with a flush mounting cover on each side providing an aesthetic finish. It should handle up to 5 Kgs of material. The clutch should mount flush to the face of the bracket which minimize the light gap between the shade and the window frame. All complete as per approval of designer & instruction of Project Manager. |
| 96 | STEEL WORK |
| 97 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 98 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 99 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge profile B Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) |
| 100 | Supplying,frtting and fixing M.S. grill made of 20x6cmm M.S. flat as per approved design and drawing, properly fabrlcated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/1 |
| 101 | FLOORING WORK |
| 102 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 103 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry@ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 104 | providing and laying, vitrified step/dado tiles in with water absorption less than 0.08% and conforming to lS 15622/ of approved make in all cotours and shades, laid on 20mm thick cement mortar 1 4 (1 cement:4 coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of tile 1200x300 mm X15MM |
| 105 | providing and laying, Doublecharge vitrified floor tiles in different sizes (thickness to be specified by lhe manufacturer) with water absorption less than 0.08% and conforming to lS 15622/ISO 13009 of approved make in all cotours and shades, laid on 20mm thick cement mortar 1 4 (1 cement:4 coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of tile 600x600 mm |
| 106 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 :: 4 (1 cement: 4 coarse sand): 25mm thick |
| 107 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 108 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 109 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills. facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, induding rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels Granite of any colour and shade .Area of slab over 0.50 sqm. |
| 110 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer-in-Charge. Granite work. |
| 111 | Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. |
| 112 | Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. |
| 113 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 114 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red |
| 115 | Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand): Medium shade pigment using 50% white cement, 50% ordinary cement |
| 116 | Supply and installation of PVC sheet flooring 2 metre wide and overall thickness of 2mm of Armstrong/ Forbo/ Polyflor. The product should be homogeneous and single layered. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVCwith DIAMOND 10 technology, Plasticizers without DOP, Urethane, color pigments and filler calendered to form a sheet. Product shall conform to group \\"T\\" wear resistance as per EN 649, Flammability resistance of class Bfl-s1 as per EN13501-1, Dynamic coefficient of friction of class DS as per EN 13893, Impact sound reduction of 3dB as per ISO 10140, Slip Resistance of class R9 as per DIN 51130, Color fastness rating of ≥6 as per ISO 105-B02, total weight being 3.3 kg/m2 as per EN430. The product shall be suitable for applications in class 23/34/43 areas as per EN685. Product shall exhibit antistatic behaviour, resistance to bacteria,resistance to chemical, resistance to staining,suitability to castor chair. Equivalent to Armstrong Simpurity Installation- It is important to ensure the subfloor on which the sheet is being laid is smooth, flat, hard and free from moisture, grease etc. In case of uneven subfloor the same should be levelled using self leveling compound which will charged extra. The moisture present in the subfloor should be less than 8% before installation of the floor adhesive. The installation shall be undertaken as per manufacturers installation instructions. |
| 117 | Providing and laying of 2 - 3 mm average thick layer of cementations smoothening compound of UZIN NC 149 sh or equivalent as recommended by the Vinyl sheet flooring manufacturer over and including a priming compound of UZIN PE 360 sh or equivalent as recommended by the Vinyl sheet flooring manufacturer and installation team on concrete surface to provide a smooth & homogenous surface for laying of vinyl sheet flooring complete to the entire satisfaction of Engineer-in-charge. |
| 118 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. |
| 119 | The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all Tsections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. |
| 120 | With 16 mm thick beveled tegular mineral fibre Antimicrobial false ceiling tile confirming to ISO 5 (class 100 ) specifications |
| 121 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
| 122 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 123 | 12.5 mm thick tapered edge gypsum moisture resistant board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 124 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-inCharge. |
| 125 | With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles |
| 126 | Providing & fixing High NRC (0.80), Fire Rating A1 (EN 13501-1), RH 100% (No visible deflection in high humidity), Superior Class Light Reflection, Sag Resistant 12mm thick Ceiling Tiles of size 600x600 A-Edge (Square) with AntiBacterial Properties & M1 Class Emission Certification made up with Natural Stone (Bassalt Rock) a complete Green Product & perfect suitable for any kind of False Ceiling application in builiding & costruction. The Visible side is a smooth white painted fleece, the Rear side: back fleece with complete facctory finish Painted edges. |
| 127 | Supply and installation of PUR Vinyl Sheet wall covering 1.5m wide, having a nominal total thickness of 1mm. The nominal thickness of the wear layer would be 1mm. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments and filler calendared to form a sheet. Colors shall be dispersed throughout the thickness of the wear layer. shall conform to Group M of Wear Resistance as per EN 660-2, Fire resistance of group 2 as per AS/NZS3837, Residual indentation of ≤0.10mm as per EN433, curling after exposure to moisture ≤8mm as per EN434, Seam strength of mean≥240N/50mm as per EN684. |
| 128 | WATERPROOFING WORK AND ROOF WORK |
| 129 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of :v) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. vi) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.vii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. viii) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) |
| 130 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : |
| 131 | Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. |
| 132 | Water proofrng for Old and New Roof Slab :- Providing and laying water prooflng treatment on roof slab by applying two Component, factory a designed ready to use, acrylic modified flexible material applied with brush, roller or spray waterproofi ng coating as per manufacturer specification-With following steps :- |
| 133 | (a)surface preparation :-Provrding and cleaning of concrete surface to remove dust, oil, grease including removal of existing loose paint / coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. On identification of seepage, cement grouting to be done with non shrink expanding admixture . |
| 134 | Providing and reparing of all corners and joints such as those between the parapet wall and the roof slab etc shall be chamfered with '150mm X '150 mm fillet of mortar (Cement: sand - 1:4) admixed with acrylic polymer Before chamfering a prime coat shall be given with the slurry of acrylic polymer Repairing surface irregularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete. |
| 135 | (b)1st Coat :- Apply 1st coat of two component acrylic modified, ready to use, flexible cementitious material on surface saturated dry roof and inside wall of Parapet wall upto 600 mm by brush or roller. After 1st coat of application ,45 gsm oI Fibre glass cloth to lay when the first layer is still green. 1st coat should be applied @1.50 kg/Sqmt/coat For the purpose of measurernent tte entire treated surface will be measured.\\" |
| 136 | (c) :2nd Coat:- To apply the 2nd coat of two component acrylic modified,ready to-use, flexible cementitious material right angle to the '1st coat over the glass fibre laid surface. 2nd coat should be applied @0.7 kg/ Sqmt/coat. For the purpose of measurement the entire treated surface will be measured.\\" Alter three days of drying the 2nd coal , the rain water outles to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification lo be done as per satisfation of E/c. |
| 137 | Chemical Base Part A.Acrylic copol;,mer, Part 13 Specially graded cementitious powder -Density 1.6 kg/l (mixed density) at +270C Tensile Strength -2 N/mm2 after 28 Days (with Fibre cloth) (According to ASTM D 2370)Pullout Bond Strenth-2 n/mm2 (concrete failure) (According to ISO. |
| 138 | 4624) Slant-Shear Bond Strength -4 N/mm2 (According to FIP 5.15) Elongation at Break -35% without Fibre Cloth and 20% wilh Fibre Cloth (According to ASTM D 2370) |
| 139 | D Protection of treated with pcc :- The treated surface shourd be covered with 25mm/50mm PCC of M-20 grade(1:1.5:3) with proper slope ( 1:120) towards the rain outlets in alternatepanels of 2 mtx2mt keeping 6 mm gap between the panel joint. integral water proofing admixture conforming to lS 2645 @ of 100 ml perbag of of cement to be added in the screed concrete (paid separately for thts ltems |
| 140 | all corners shall be charfered with 150mm X 150 mm fillet. The rain water outlets shall be just leveled with the screed concrete to ensure smooth discharge of water - the peripheral gaps between pvc pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty .For the purpose of measurement the entire treated surface will be measured.\\" |
| 141 | (e)Groove of PCC surface should be filled with Polysulphide Sealant (Paid Separately) |
| 142 | Covering of treated surface wrth PCC :- Providing 50 mm thick Cement Concrete M20 (1:1.5:3) raintaining slope in alternate 2 mIx 2 mt panels with aaproved quality of stone chips of 20 mm to 6 mm size graded and clcaned sand of F M 2 5 io 3 including screening,shuttering,and mixing cerite nt c0ncrete in mixer with admixture of integral water proofing and placing rn position,strikirrg cLrring,t-a]glgnd royality all complete as per buildirrg specifictionJand direction of E/l.Panels that has been left should be casteci nextday.-lhere should be 6 mm gap between Panels. |
| 143 | Providing and mixing Liquid lntergral water proofing compound in Conctrete or plaster as per rnanufacturer specificatioqand as per cjirection of Eng - in Charge |
| 144 | Provrding and filling of Groove between 50 mm PCC Panels with Polyshlphide Sealant (Poring Grade)as per drawings and Technical specifications and dii-ection of E in Charge (with 1B% GST).Brand:-Sika- Polysulphide, Fosroc-l-hioflex 600 Dr. Fixit Pidiseal PS(42P),MYK Seal PS or Euivallent |
| 145 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design |
| 146 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement laster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 147 | FINISHING WORK |
| 148 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 149 | Providing 12 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 150 | Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 151 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 152 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 153 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One or more Coats |
| 154 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour |
| 155 | Finishing walls with 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 156 | Finishing walls with Acrylic Smooth exterior paint of required shade,New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 157 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coat applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 158 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 159 | Supplying, Installation, Testing & Commissioning of following capacity passenger cum bed lift Machine room less (MRL) Bed lift with regenerative drive as per CPWD General Specification for Electrical Works (Part-III Lift & Escalator) 2003, BIS Codes, NBC 2016 as amended upto date having provision for barrier free access as per Harmonised Guidelines & Standards for Universal Accessibility in India - 2021 of MoHUA, serving different floors in the lift shaft as per detailed specifications enclosed and as under including all other equipment and accessories complete as required :- (i) Speed-1.0 MPS (ii)Floors-5(G+4) (iii) Travel-17 metres(approx) (iv) Stops & opening : 5 stops and 5 openings (v) Controller: A.C. variable voltage & variable frequency (vi) Automatic rescue device (ARD) complete with dry maintenance free batteries as required. (vii) Operation: Microprocessor based single automatic push button/simplex selective collective/ duplex collective selective with/without attendant (viii) Power-415 Volts+10%, 3 phase, 50 Hz, 4 wires system (ix) Car Enclosure: Stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish) on all sides and stainless steel decorative ceiling with fans (indirect throw) and LED fitting. (x) The car flooring should be smooth and antiskid as approved by engineer-in-charge. (xi) Type of doors:- (a) Car: Power operated, centre opening horizontal sliding stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish). (b) Landing doors: stainless steel scratch proof . |
| 160 | (xii) A hand rail not less that 600mm long at 900mm above floor level to be fixed adjacent to control panel in the lift car. (xiii) Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at floor served by the elevator. (xiv) Closed loop Control System, protection against power fluctuation, self diagnostic control, Landingdoors 2 hours Fire rated, Overload detection and protection, Overspeed Governer, Dot Matrix LED D & P Indicators In Car &Landings, BMS Compatibility, tamper proof infrared curtain covering almost the entire height of the lift car door, Alarm horn, Anti Nuisance Operation, CCTV camera system with 4 MP IP camera, suitable NVR and HDD for 30 days storage backup , Firemen switch, 2/3 way intercom, Emergency Stop Switch with battery backup for fan and light fitting for 1 hour, pit ladder (xv) The lift doors shall have a vision panel to enable persons with hearing impairment to signal for help or assistance in the event of an emergency. (xvi) An appropriate technological support be provided (Through emergency messaging |services or alarms etc.) to respond to the emergency requirements of person with hearing impairment or deafness. (xvii) In case of failure of ARD or other electronic devices, a provision of manual rescue be provided. 20 passenger (1360kg) |
| 161 | Providing and fixing of 10 Passenger Lift/ 1050Kgs / 1.25 Speed / 4 Floors / 4 Stops / Stainless Steel skretch proof with cast iron counter weight and T section guide rail for car and counter with lift licence.Car Cabin approved design and make |
| 162 | ICE COLOR FLUX 6.2 White MODULAR POLYCARBONATE PANEL WORK |
| 163 | Supply & Installation of FLUX polycarbonate multi-layered, multicell connectible modular panel system, a complete assembly of co-extruded UV plus polycarbonate panels along with all standard fixing accessories. The polycarbonate panel shall be thick with 900mm (Max) width. The panels shall be uniform in color with an integral core. In a cross section, the core shall be constructed of six walls, five cells with vertical separator in between like truss bracing structure to provide better strength to the panel. Panels with bigger width more than 900 mm will not be preferred to counter higher wind load and meet design wind load of the project. The polycarbonate panels with interlocking connectible connectors running lengthwise at both sides of the panel shall be with double tooth locking and anti-pop, deep groove to counteract shear wind forces. The whole system shall be secured using SS Trapezoidal fasteners having minimum three points for fastening with self-drilling Screws to have proper fixing with the structural framework (Paid separately). The Trapezoidal SS fasteners shall have a base coverage of minimum 40mm and top holding of 80mm across length on polycarbonate panel to ensure a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005. Panels shall be solo translucent with angular daylighting concept one color throughout the panel for better insulation and improved shading coefficient for Indian tropical weather conditions. |
| 164 | The whole system shall be secured with end caps, breather / solid tapes, Aluminum “U” - End profile (Mill Finish) having drainage holes to let rainwater flow out without affecting the panel system. U value shall not be more than 2.5 Watt/m2K as per EN ISO 1077-2:2018. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155.Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. Panels shall have fire rating as per EN13501 B,s1/s2,d0. All respective third-Party test certificates shall be produced before procurement and the same shall not be more than 5 years old and shall be from NABL accredited Indian labs. The system bears a 10 Year Limited Warranty towards Light Transmission, Colour and Breakage |
| 165 | CARRAIGE OF MATERIALS |
| 166 | SAND ( 10KM ) |
| 167 | CHIPS ( 22 KM ) |
| 168 | METAL ( 22KM ) |
| 169 | BRICKS ( 1+7KM ) |
| 170 | ELECTRICAL WORK |
| 171 | Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box etc as required. Group C |
| 172 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C |
| 173 | Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way modular switch, modular plate, suitable GI box etc as required. |
| 174 | Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :- |
| 175 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 176 | Circuit / Sub main wiring in PVC conduit :- |
| 177 | Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required |
| 178 | 2x2.5 sq mm + 1x2.5 sq mm earth wire |
| 179 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire. |
| 180 | 2 x 10 sq.mm. + 1 x 6 sq.mm. Earth wire |
| 181 | 4 x 10 sq.mm. + 2 x 6 sq.mm. Earth wire |
| 182 | 4 x 16 sq.mm. + 2 x 6 sq.mm. Earth wire |
| 183 | S/F light plug point Modular Type Accessories :- |
| 184 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections painting etc. as required. (For light plugs to be used in non residential buildings). |
| 185 | S/F power plug point modular Type Accessories :- |
| 186 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections painting etc. as required. (For light plugs to be used in non residential buildings). |
| 187 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 188 | DISTRIBUTION BOARDS & MCB's |
| 189 | Supplying and fixing 6 Amp to 32 Amp rating 240 volts, 10 KA \\"C\\" Curve Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc.,as required. |
| 190 | 6/32 amps, Single pole |
| 191 | 40 amps DP |
| 192 | 50/63 amps, TPN |
| 193 | Supplying and fixing Single pole blanking plate in the existing MCB DB complete etc. as required. |
| 194 | Supplying and fixing following ways, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 195 | 6 Way (4 + 18), Double Door Horizontal Type |
| 196 | 8 Way (4 + 24), Double Door Horizontal Type |
| 197 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door |
| 198 | S/F DP MCB Isolator |
| 199 | Supplying and fixing following Rating, Double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 40 Amps |
| 200 | S/F 4P MCB Isolator |
| 201 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 63 Amps |
| 202 | S/F DP (RCCB) |
| 203 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as Required.v40 Amps |
| 204 | TELEPHONE, TELEVISION & DATA SYSTEM (socket,wiring & conduting only) |
| 205 | S/F MODULAR BOXES, BASE & COVER PLATE :- |
| 206 | Supplying and Fixing Following Size/ Modules, GI Box Alongwith Modular Base & Cover Plate for Modular Switches in Recess etc. as Required. 1 or 2 Module (78mm x 78mm x 45mm) |
| 207 | S/F MODULAR TYPE SWITCH / SOCKET :- |
| 208 | Supplying and Fixing Following Modular Switch/ Socket on The Existing Modular plate & Switch Box including connections But Excluding Modular Plate etc. as required. |
| 209 | Telephone Socket outlet. |
| 210 | TV Antenna socket outlet. |
| 211 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm. |
| 212 | Supplying and drawing following pair 0.5 mm dia FR PVC insulated copper conductor, Unarmored Telephone cable in the existing surface/recessed steel/ PVC conduit as required. 2 Pair |
| 213 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 214 | Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete as required. 1 run of cable |
| 215 | Supplying & Fixing Modular Type Computer jack RJ 45 ISI mark 1 Module on existing Mounting plate and box Complete with all accessories as required. |
| 216 | INTERNAL LIGHTING FIXTURES & FANS |
| 217 | SITC of following rating recess / surface mounted LED round / square shape down light luminarie with pressure die cast housing for single phase supply voltage Luminarie shall be confirm to IS: 10322 part -5 / section -2 or IEC :62722 withh all neccesary accessories as required. |
| 218 | 12W LED Round Down Light |
| 219 | 15 / 16 W LED Round Down Light |
| 220 | 18 /20 W LED Round Down Light |
| 221 | Bulk Head fitting with 9/10Watt LED. |
| 222 | Supply of LED Mirror Light with power 8/10W rated voltage 230V 50 Hz aluminium/ PC body with rauuning life minimum 30000 Hours |
| 223 | S.I.T.C of following rating surface mounted LED Tube Lighting Fitting Suitable for 230V 50 Hz, Single Phase Supply etc. complete as required. 20/22 W LED Tube Light |
| 224 | SITC LED Batten light (System lumen efficacy ≥105 <120 lm/Watt) 40 watt |
| 225 | SITC LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) |
| 226 | 36 watt |
| 227 | 40 watt |
| 228 | Supply & Installation, testing and commissioning of 9-15W LED Bracket Light fitting suitable for 9-15 Watt LED Light with all accessories as required. |
| 229 | Supply insttalation , testing and commisioning of following size ceiling fan 3 balde confirming to IS : 374:2019 incuding wiring thedown roads of standed lenth ( upto 30 cm ) with 1.5 sqmm PR PVC, insulated copper wire suitable for 230V 50Hz single phase supply etc. compleyte as required. 1200mm (48 Degree) BLDC 5 star rating 32W ceiling fan |
| 230 | Supply and fixing of step type electronic fan regulator on existing modular plate switch box including connection but excluding modular plate etc as required. |
| 231 | Installation, testing and commissioning of ceiling fans/bracket fan of all sizes including wiring the down rod .of standard length (up to 30 cm ) with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as required. |
| 232 | SITC of 300 mm (12\\") Exhaust fan (Metal body) suitable for single phase 230 volts, 50 Hz., AC supply complete with motor, louvers/shutters etc. complete as required |
| 233 | SITC 450 mm (18\\") Metal Body Wall Fan with Speed Regulator Suitable for Single Phase 220V, 50Hz AC Supply complete as required |
| 234 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing |
| 235 | MAIN LT PANEL, HT PANELS & SUB DISTRIBUTION PANELS |
| 236 | LIFT PANEL |
| 237 | Design, manufacture, supply, installation, testing and commissioning of Floor Mounting Panel cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. |
| 238 | INCOMER : 100 AMP FP MCCB |
| 239 | BUS BAR : 125 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.8 sq mm /amp. |
| 240 | The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. |
| 241 | OUT GOINGS : |
| 242 | 1 No 63 AMP 4P MCB Including Indication Lights (Lift 1) |
| 243 | 1 No 63 AMP 4P MCB Including Indication Lights (Machine Room DB) |
| 244 | 1 No 63 AMP 4P MCB (Spare) |
| 245 | complete panel as above and complete |
| 246 | MAIN DISTRIBUTION PANEL |
| 247 | SITC of cubicle Panel suitable for 415V, 3 phase, 4 wire 50 HZ Ac supply system, fabricated in conmpartmentalized (preferbly) design from CRCA sheet of 2mm thick for frame work and covers, 3mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable Amp capacity extensible type TPN aluminium alloy bus bars of high conductivity, DMC/SMC bus bar supports, , bottom base channel of MS section not less than 50mm x 50mm x 5mm thick, entire pannel shall have a common copper earth bar 25mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of AI. bus bars and control wiring with 2.5 sq.mm. FRLS PVC insulated copper conducter S/C cable, cable alleys, cable gland plates in two half. i/c providing following switch gears :- |
| 248 | INCOMER : 1000 AMP 50KA FP ACB |
| 249 | BUS BAR : 1250AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. |
| 250 | digital voltmeter with selecter switch 1 no. digital Am meter with selector switch required C/T, LED indicating lamp (RYB)- 1no. |
| 251 | OUT GOINGS : |
| 252 | 14 Nos 125 AMP 4P MCCB Including 1 set of Indication Lamp |
| 253 | 2 Nos 100 AMP 4P MCCB Including 1 set of Indication Lamp |
| 254 | 3 Nos 63 AMP 4P MCB Including 1 set of Indication Lamp |
| 255 | 3 Nos 40 AMP DP MCB Including 1 set of Indication Lamp |
| 256 | complete panel as above and complete |
| 257 | FLOOR PANEL 1 |
| 258 | SITC of cubicle Panel suitable for 415V, 3 phase, 4 wire 50 HZ Ac supply system, fabricated in conmpartmentalized (preferbly) design from CRCA sheet of 2mm thick for frame work and covers, 3mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable Amp capacity extensible type TPN aluminium alloy bus bars of high conductivity, DMC/SMC bus bar supports, , bottom base channel of MS section not less than 50mm x 50mm x 5mm thick, entire pannel shall have a common copper earth bar 25mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of AI. bus bars and control wiring with 2.5 sq.mm. FRLS PVC insulated copper conducter S/C cable, cable alleys, cable gland plates in two half. i/c providing following switch gears :- |
| 259 | INCOMER : 125 AMP 25KA FP MCCB |
| 260 | BUS BAR : 160 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. |
| 261 | digital voltmeter with selecter switch 1 no. digital Am meter with slecter switch required C/T, LED indicating lamp (RYB)- 1no. |
| 262 | OUT GOINGS : |
| 263 | 10 Nos 63 AMP 4P MCB Including 1 set of Indication Lamp |
| 264 | 4 Nos 40 AMP DP MCB Including 1 set of Indication Lamp |
| 265 | complete panel as above and complete |
| 266 | UPS INPUT PANEL |
| 267 | Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. |
| 268 | INCOMER : 1 Nos 630 AMP 35KA FP MCCB |
| 269 | BUS BAR : 800 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. |
| 270 | OUT GOINGS : |
| 271 | 3 Nos 315 AMP 4P MCCB Including 1 set of Indication Lamp |
| 272 | complete panel as above and complete |
| 273 | UPS OUTPUT PANEL |
| 274 | Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. |
| 275 | INCOMER : 2 Nos 315 AMP 35KA FP MCCB (Including BY Pass Switch for 200 KVA UPS) |
| 276 | BY PASS Switch for UPS 315 AMP FP MCCB - 2 no. |
| 277 | BUS BAR : 400 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. |
| 278 | OUT GOINGS : |
| 279 | 2 Nos 315 AMP 4P MCCB Including 1 set of Indication Lamp |
| 280 | 2 Nos 40 AMP DP MCB Including 1 set of Indication Lamp |
| 281 | 1 Nos 125 AMP 4P MCCB Including 1 set of Indication Lamp |
| 282 | 1 Nos 100 AMP 4P MCCB Including 1 set of Indication Lamp |
| 283 | complete panel as above and complete |
| 284 | EXTERNAL LIGHT FEEDER PILLAR |
| 285 | Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, wall / floor mounting type with rain canopy The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid. |
| 286 | INCOMER: |
| 287 | 1 no. 125A, 25KA 4P MCCB with microprocessor based releases, ON indication, 1 no. multifunction meter (showing all power parameters), with Selector Switch, Matching Cast Resin CT's. + 3 Nos 63A DP MCB For each Phase.with 3 Nos Astronomical Weekly programmable time switch (SST- 1min) ON Phase for automaitc switching of landscape light fixtures at sun set and sun rise or twilight (auto on/ auto off and auto mode) with manual override faiclity with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site. |
| 288 | BUS BAR |
| 289 | TPN Aluminium bus bar with heat Shrink Sleeve rated for 125A. |
| 290 | OUTGOING |
| 291 | 18 nos 20A SPN MCB |
| 292 | 2 nos 63A 4P MCB |
| 293 | 2 nos 40A 4P MCB |
| 294 | Other items such as |
| 295 | 1 Set of control wiring |
| 296 | 1 Set of designation plates |
| 297 | complete panel as above and complete |
| 298 | CABLES & ACCESSORIES |
| 299 | SUPPLY OF L.T. CABLE: |
| 300 | Supply of XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts. (conforming to IS-7098. (Part-I). |
| 301 | 3.5 core, 300 sq.mm. |
| 302 | 3.5 core, 240 sq.mm. |
| 303 | 3.5 core, 185 sq.mm. |
| 304 | 3.5 core, 150 sq.mm. |
| 305 | 3.5 core, 120 sq.mm. |
| 306 | 3.5 core, 95 sq.mm. |
| 307 | 3.5 core, 70 sq.mm. |
| 308 | 3.5 core, 50 sq.mm. |
| 309 | 3.5 core, 35 sq.mm. |
| 310 | 3.5 core, 25 sq.mm. |
| 311 | LT CABLE LAYING |
| 312 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 313 | Upto 35 sq. mm |
| 314 | Above 35 sq. mm and upto 95 sq. mm |
| 315 | Above 95 sq. mm and upto 185 sq. mm |
| 316 | Above 185 sq. mm and upto 400 sq. mm |
| 317 | LT CABLE JOINTING & END TERMINATION |
| 318 | Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. |
| 319 | 3½ X 25 sq. mm (28mm) |
| 320 | 3½ X 35 sq. mm (32mm) |
| 321 | 3½ X 50 sq. mm (35mm) |
| 322 | 3½ X 70 sq. mm (38mm) |
| 323 | 3½ X 95 sq. mm (45mm) |
| 324 | 3½ X 120 sq. mm (45mm) |
| 325 | 3½ X 150 sq. mm (50mm) |
| 326 | 3½ X 185 sq. mm (57mm) |
| 327 | 3½ X 240 sq. mm (62mm) |
| 328 | 3½ X 300 sq. mm (70mm) |
| 329 | EARTHING & LIGHTNING CONDUTOR |
| 330 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 331 | Earthing with Copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 332 | Providing and fixing 25 mm X 5 mm GI strip in 40mm dia GI Pipe from earth electrode including connection with GI nut bolt, spring, washer, excavation and refilling etc as required |
| 333 | Providing and fixing 25 mm X 5 mm Copper strip in 40mm dia GI Pipe from earth electrode including connection with brass nut bolt, spring, washer, excavation and refilling etc as required |
| 334 | Providing and fixing 25 mm X 5 mm Copper strip on surface or in recess for connections etc. as required |
| 335 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required |
| 336 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 337 | Providing and fixing of lighting conductor finial made of 25 mm dia 300 mm long, GI tube having single prong at top with 85 mm dia 6mm thick G.I Base plate including hole etc. as required |
| 338 | Providing and fixing GI Tape 20mmx 3mm thick on parapet or surface of wall for lighting conductor complete as required. ( for Horizental Run) |
| 339 | Providing and fixing GI Tape 20mmx 3mm thick on parapet or surface of wall for lighting conductor complete as required. ( for Vertical Run) |
| 340 | Providing and fixing testing Jointing made of 20mmx 3mm thick G.I Strip 125 mm Long. With 4 nos of G.I bolts. Nuts chuck nuts and spring washers etc. as required |
| 341 | Providing and Laying G.I tape 32mm x 6mm from earth electrode directoly in ground as required. |
| 342 | UPS SYSTEM |
| 343 | SITC - Online UPS- Input supply: Three Phase, Output supply: Three Phase, The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up 40KVA (Each Power module shall be < 10 KVA) |
| 344 | CABLE TRAYS & RACEWAYS |
| 345 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. (Cable Tray Bends as per Requirement) |
| 346 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 347 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 348 | 450 mm width X 50 mm depth X 2.0 mm thickness |
| 349 | 600 mm width X 50 mm depth X 2.0 mm thickness |
| 350 | 750 mm width X 62.5 mm depth X 2.0 mm thickness |
| 351 | 900 mm width X 62.5 mm depth X 2.0 mm thickness |
| 352 | RACE WAYS :- |
| 353 | Providing and laying 1.6 mm thick pregalvanized GI factory fabricated raceways of the following sizes including 2 mm thick GI covers, providing knock out holes and all required fixing accessories including 6 SWG GI earth wire complete as required including floor /wall supports, bends, access boxes and tap off boxes as per specification and cross over as per site requirement. Note:- Blue & Orange colour shall be considered for Power & Data raceway respectively. The item shall include the cost of chipping, cutting the floor for laying the raceway and making good the finish including chicken mesh complete as required as per site requirement. |
| 354 | 50x40x15x1.6mm & Cover 2mm |
| 355 | 100x40x15x1.6mm & Cover 2mm |
| 356 | 200x40x15x1.6mm & Cover 2mm |
| 357 | 300x40x15x1.6mm & Cover 2mm |
| 358 | RISING MAIN & ACCESSORIES |
| 359 | Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm atnominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required. |
| 360 | 400 A, Isc= 25kA for 1 sec |
| 361 | 800 A, Isc= 50kA for 1 sec |
| 362 | Supplying, installation, testing & commisioning of following capacity Plug In/ tap off box on the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete etc. as required 125 A, Isc= 15kA for 1 sec |
| 363 | Supplying, installation, testing & commisioning of following capacity End Feed Unit for the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure (IP54) duly powder coated with rovision of MCCB/ACB (but without MCCB/ACB) complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required |
| 364 | 400 A, Isc= 30kA for 1 sec |
| 365 | 800 A, Isc= 50kA for 1 sec |
| 366 | Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes cubicle panel, making connections, etc. as required. |
| 367 | 125 amps, 16ka fixed thermal setting |
| 368 | 400 amps, 35ka adjustable thermal setting |
| 369 | 800 amps, 35ka adjustable thermal setting |
| 370 | EXTERNAL LIGHTING |
| 371 | S.I.T.C of Following rating LED Post Top lamp made in die cast aluminium housing with decorative clear / opel acrylic diffuser on existing pipe including connection with 1.5sq.mm coppwr conductor etc all complete as required. 20/25W LED Post top lamp clear |
| 372 | S.I.T.C of Following rating approved make LED Bollard Fitting with cylindrical shape and inverted cone shape head of height 600 to 850 mm power input -8/9 watt with die cast aluminium housing opel with PC diffuser, IP-65/54 protection, confirming to IS : 10322 part 5 etc all complete as requird. (Excluding Plinth Charge.) |
| 373 | S.I.T.C of Following rating LED Street Lighting luminare with pressure die cast housing and toughened glass cover (IP 66 protection ) in existing pole / pipe for supply voltage 100-270 AC 50Hz Luminare shall be confirm to IS :10322 part 5/ section-3 and shall be complete with all nessessary accessories as required. |
| 374 | Supplying & installation of 7 mtr. Height Octagonal Hot Dip galvanized pole (BOP. 7030) with top dia 70 mm bottom dia 130 mm & made of 3 mm thick sheet base plate dimensions 200x200x12 mm (LxBxT) including suitable size of foundation bolt all complete as required (without Arm). |
| 375 | 1M Single Arm Suitable for 70MM Top |
| 376 | Installation, Testing & Commissioning of the 7 mtr Octagonal Pole & Light Fitting with the help of suitable tools and plants, and construction of shallow foundation with M25 grade concrete considering safe soil bearing capacity og 10T/sqmtr but excluding wire and mcb |
| 377 | Supply of XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts. (conforming to IS-7098. (Part-I). 2 core, 6 sq.mm. |
| 378 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm |
| 379 | Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. 2 X 6 sq. mm (19mm) |
| 380 | Supplying and laying of following sizes FR PVC insulated single core copper wire in existing conduit complete as required. 3x2.5 sq mm |
| 381 | MANHOLE & HUME PIPE |
| 382 | Providing and laying non pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixtures of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete |
| 383 | 150 mm dia |
| 384 | 250 mm dia |
| 385 | 300 mm dia |
| 386 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 387 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1:5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 388 | HDPE PIPES |
| 389 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 200 mm dia (OD-200 mm & ID-175 mm nominal) |
| 390 | SUB HEAD XV : SOLAR PV POWER GENERATION SYSTEM |
| 391 | Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant conforming to various applicable standards BIS, IEC, MNRE guidelines, the Central Electricity Authority Regulations and CPWD Specifications as amended up to date, consisting of Mono/Poly Crystalline silicon solar cells module, net metering facility, necessary control, protections, earthing, cabling, mounting structure, junction boxes, power conditioning units, Real time online web interfaced Data Monitoring System, Distribution panels, grid connecting arrangement, conduits, pipes, cable trays and other accessories etc. as required. |
| 392 | a) High Energy Efficiency Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730 Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 23% at STC with temperature coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to operate in relative humidity upto 100% with temperature between -10 0C and +85 0C. Further, each PV module used in any solar power project must have Radio frequency identification tag with information such as name of manufacturer, month and year of manufacturing, country of origin (separately for Solar cell and module), I-V curve, Unique Serial No and Model No of the module, Wattage, Im, Vm and FF, name of test lab issuing IEC certificate. |
| 393 | b)Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 415 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC with a variation of 10% at nominal voltage. Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 0C, Minimum IP-65 for outdoor and Minimum IP 21 for indoor, Built-in meter and data logger, MPPT, switching devices IGBT/MOSFETs and controller Microprocessor /DSP. PCU/inverter shall be capable of complete automatic operation including wake-up, synchronization & shutdown. The PCU shall be able to withstand unbalanced load conforming to IEC standard with shutdown/standby mode. It must be provided with grid islanding along with manual disconnect pole isolation switch besides automatic disconnection. Minimum protections: Mains Under / Over Voltage, Over current, Over/Under grid frequency, Over temperature, Surge voltage induced at output due to external source, Short-circuit, Lightning, Anti Islanding (for grid synch. Mode) and other protections as per applicable standards. LCD/LED display of minimum parameters : DC input voltage, DC current, AC Voltage and current (all 3 phases, in case of 3 phase), Instantaneous & cumulative AC output power, Daily DC energy produced and other parameters applicable standard. Communication interface RS 485 / RS 232. |
| 394 | c) Module mounting structure: The roof top solar plant generation units shall be installed by using supporting Aluminium/Galvanized MS structure (mass of zinc coating shall be as per IS4759 ) having minimum head room clearance of 2.4 meter above the terrace level / ground level. The mounting structure would be designed to sustain wind load and seismic parameter of the site of installation. All the structure shall be design as per applicable BIS code and the material shall also confirm the applicable BIS Code. Structural material shall be corrosion resistant and electrolytically compatible with the materials used in the module frame, its fasteners, nuts and bolts. The suitable arrangements for maintenance and cleaning shall be provided. |
| 395 | d) Real time online web interfaced Data Monitoring System complete with accessories for various parameters such as Solar Irradiance, temperature, AC Output Voltage and current, Output Power, Power factor, DC Input Voltage and Current, Time Active, Time disabled, Time Idle, Power produced and other parameters as per standard practices. |
| 396 | e) Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. Each junction box shall be made of GRP/FRP/Powder Coated Aluminium /cast aluminium alloy with full dust, water & vermin proof arrangement with High quality Suitable capacity Metal Oxide Varistors(MOVs) (semiconductor diode with resistant applied voltage)/ surge arrestors and suitable Reverse Blocking Diodes, isolation switches isolate the DC input to Inverter, copper bus bar etc. |
| 397 | f) Lightning, surge voltage protection, earthing protection and grid islanding. |
| 398 | g) Cables: Connections & Interconnections by required size IR/UV protected XLPE insulated copper conductor 1.1 kV grade armored power and control cables(ISI Marked) along with supplying & fixing of necessary channel/conduit, GI cable trays, supports, lugs, thimble and other accessories etc. as required. |
| 399 | h) DC Distribution Board And AC Distribution Panel Board: IP65, free standing, metal cladded, having copper bus bar, having required protection and control gears, connection-interconnection, etc. as required. |
| 400 | All Items complete as above |
| 401 | SUB HEAD XVII : IP CCTV SYSTEM |
| 402 | Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C. Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg 1 Run of cable |
| 403 | Supplying, Installation, Testing and commissioning of CAT6 Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to mainitain compatibility and interopertability. |
| 404 | Supply, Installation, Testing & Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel. 24 Ports Cat-6 Patch Panel should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D |
| 405 | Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D Copper Patch Cords of length 1m (3ft) |
| 406 | Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D Copper Patch Cords of length 3m (10ft) |
| 407 | Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate, British Style with Shutter, 2 Plate system clear finish with transparent labelling, ABS-UL94-V2, ROHS Compliant, in accorandce with standards like ANSI/TIA-568-C.2, ISO/IEC 11801:2002 AMMD.2:2010, YD/T 926.3-2009 & ISO/IEC 60603-7 white for I/O fixing at user side. |
| 408 | Supplying Installation Testing and Commissioning of 5/6MP IP IR Dome Camera having following spcifications and features Type of Camera: Dome Camera Image Sensor: 1/2.8\\" or better progressive Scan CMOS get color image even at night condition Signal System: PAL/NTSC Minimum Illumination: 0.008Lux@ F1.4, AGC ON, 0 lux with IR or better Imaging: 1/3s to 1/30000s Shutter Support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. On Screen Display: Camera should display Camera title, Date & Time in live & recorded video both. Signal to Noise Ratio: > 50 dB 5/6MP ((3200 × 1800)@20 fps or better) IP IR 2.7mm ~13.5mm Motorized lens, Vari Focal Dome Camera,Angle of View: H: 104°–32°, V: 54°–18°, D: 125°–36° or better |
| 409 | Supplying Installation Testing and Commissioning of 5/6 MP IP Type of Camera: Bullet Camera Image Sensor: 1/2.8\\" or better progressive Scan CMOS get color image even at night condition Signal System: PAL/NTSC Minimum Illumination: 0.006Lux@ F1.4, AGC ON, 0 lux with IR or better Imaging: 1/3s to 1/30000s, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. On Screen Display: Camera should display Camera title, Date & Time in live & recorded video both. Signal to Noise Ratio: > 50 dB IR Bullet Camera having following spcifications and features 5/6MP ((3200 × 1800)@20 fps or better) IP IR 2.7mm ~13.5mm Motorized lens, Vari Focal outdoor Bullet Camera,Angle of View: H: 104°–32°, V: 54°–18°, D: 125°–36° or better |
| 410 | 5MP IP IR motorized PTZ @25/30fps or better camera, Triple streaming , configurable on resolution:- Main stream: 5MP@25/30 fps Sub treams:1080p@25/30 fps, varifocal lens 3.95mm (±5mm) ~ 177.75mm (±5mm) or better with Automatic & manual Focus Adjustment provisions, 45x Optical zoom and 16x Digital zoom with angle of view H: 65.7°–1.9°V: 39.4°–1.1°D: 73.1°–2.1, PAN Travel: Pan: 0° ~ 360° endless,Manual Pan: 260° /s, Preset : 300° /s, Tilt Travel: Tilt: -20° ~ 90°, auto flip 180°, Manual Tilt: 120° /s, Preset : 200° /s |
| 411 | Supply, installation, testing and commissioning of 64 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9/16/25/36/64, 2nd screen: 1/4/8/9/16 |
| 412 | Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL certifications. 10TB (Terabytes) |
| 413 | Supply, Installation, Testing and Commissioning of Full HD 55\\" LED Professional Display Panel. |
| 414 | Supply, Installation, Testing & Commissioning of L2+ managed industrial PoE switch with 4*10/100/1000M RJ45 ports and 2*100/1000M SFP slot ports, Port 1-4 can support IEEE802.3af/at PoE. Switching capaticy of 128Gbps, forwarding Rate 8.93 Mpps, having 4 x 10/100/1000BASE-T PoE-plus(RJ45) with maximum PoE output power is 60W (at-120W) , with 2*100/1000Base-X uplink SFP slot ports., 8K MAC address. Should have Static Routing , system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), and IPv6 features from day 1. |
| 415 | 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+. |
| 416 | Supply, Installation, Testing & Commissioning of L2+ managed industrial PoE switch with 24*10/100/1000M RJ45 ports and 4*1/10G SFP+ fiber slot ports, Port 1-24 can support IEEE 802.3af/at PoE standard, switching capaticy of 598 Gbps, forwarding performance 95.23 Mpps, maximum PoE output power is 400W(at-600W), with 32K MAC address. Should have Static Routing , system logging, Telnet, SSH2.0, SNMP V1/V2C/V3, Network Time Protocol (NTP), FTP, TFTP, Xmodem |
| 417 | Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5\\" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest. |
| 418 | Supply, installation, testing and commissioning of Joystick with 5' LCD Display. |
| 419 | FAS WITH INTEGRATED PA SYSTEM |
| 420 | Fire Panel & Annunciators |
| 421 | Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS |
| 422 | 2-loop Panel |
| 423 | Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. |
| 424 | Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. |
| 425 | Modules |
| 426 | Supplying, installation, testing & commissioning of addressable manual call point complete as required. |
| 427 | Supplying, installation, testing & commissioning of addressable fire control module complete as required. |
| 428 | Supplying, installation, testing & commissioning of fault isolator complete with base as required. |
| 429 | Notification Devices |
| 430 | Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required. |
| 431 | Supplying, installing, testing and commissioning approved make Addressable Power Supply Unit: 24V DC for Notification Appliances. The PSU shall be UL Listed, supervised by Fire Panel & of the same make as Fire Alarm System |
| 432 | Fire Fighter Telephone Talk Back |
| 433 | Supplying, installation, testing & commissioning of fire fighter phone jack complete as required. |
| 434 | Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required. |
| 435 | IP Based Public Address System |
| 436 | Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required. |
| 437 | Supply, Installation, Testing & Commssioning of 1X500W Class-D Amplifier, which can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection and High Efficiency Class D Power Amplifier, 500W, 100V/70 Output, with 100 - 240 VAC input and 24 VDC backup power Supply |
| 438 | Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required. |
| 439 | Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required. |
| 440 | Cables & Conduits |
| 441 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. |
| 442 | SANITARY WORK |
| 443 | Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with ‘ including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I.handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all completeas per specification and direction of E/I. |
| 444 | (ii) E.W.C. with 'S' trap |
| 445 | (b) 10 lit. low level PVC Cistem |
| 446 | Supplying , fitting and fixing vitreous white glazed earthen ware I.W.C with 100mm H.C.I 'p' trap 15 liters C.I.pull and let go flushing cistren of names or other I.S.S. equivalent make , complete with all fitting , C.I.or C.C. brackets 32mm alkathene/P.V.C telescopic flush , pipe about 2 M long with one brass coupling and clamps GI ,chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less thane 50grms. 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coats of red oxide primer etc. all complete as per specification and direction of E/I. |
| 447 | (A) 580 mm. long (c) With 10 lit. low level PVC Cistem |
| 448 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction ofEngineer-in-charge. |
| 449 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin make supported on painted C.I. or R.S. brackets 32mm C.I.brass waste, 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 450 | Supplying fitting and fixing white glazed fire’s clay sink of approved make with overflow arrangements supported on C.I. or R.S. painted brackets 40mm. dia C.P.brass waste with C.P.brass chain and rubber plug 40 mm dia P.V.C. waste pipe about 750mm long with brass coupling at one endand 15mm C.I. body brass spindle bib cock of approved quality of weight not less than 450grams. including cutting wall and making good the same etc. all complete as per specification and direction of E/I. (i) Kitchen sink 600 mm x 450 mm x 250 mm |
| 451 | (b)Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. |
| 452 | (i) 600mm x 450mm size |
| 453 | (c) (i) C.P. brass towel rail 20mm x600mm with bracket container |
| 454 | (c)(iii) C.P. brass liquid soap container |
| 455 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitionsby cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade |
| 456 | Provinding and fixing wash basin wih C.I brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls whereever required : White Vitreous China Wash basin size 550x400 mm with a 15mm CP Brass single hole basin mixer |
| 457 | Providing and fixing white vitreous china laboratory sink with CI brackets , C.P brass chain with rubber plug 40 mm C.P brass waste and 40 mm CP brass trap with necessary C.P brass unions complete including painting of fittings and brackets , cutting and making good the wall wherever required : Size 600x450x200 mm |
| 458 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in charge. |
| 459 | Providing & fixing PVC waste pipe for sink including PVC waste fitting Complete Flexible Pipe 32mm Dia |
| 460 | Providing and fixing toilet paper holder : C.P. brass |
| 461 | Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms |
| 462 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 463 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 464 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. 15 mm nominal bore |
| 465 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms |
| 466 | Providibng and fixing straight type Macfit single body push fit type WC pan connector with factory supplied spring loaded seal guard of McAlpine, UK with integral single mould sealing fins made of flexible EVA body, including bush/adaptor for use with C.I. Pipe as supplied with the pan connector. |
| 467 | Providing and fixing CP brass single lever low flow Sink mixer with 15 mm CP brass single lever pillar cock with pop up and waste complete including cutting and making good the walls where required. |
| 468 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing complete as required. |
| 469 | Providing & Fixing of Grab Bar size 300mm long in handicap toilet complete as required. |
| 470 | Providing,Fixing satin finish stainless steel AISI 316 grade wall mounted coat hook on door complete. The rate include cost of all material & labour involved in the item complete and all as per direction of engineer incharge. |
| 471 | Providing, Installing & fixing storage type water heater of approved shade with copper container, glasswool insulation,stove enamelled M.S jacket, thermostatically controlled inner heater with pilot neon lamps, 15mm inlet stop cock valve, on inlet connection, 15mm dia C.P flexible connection pipe in inlet & outlet suitable for working pressure of 8 kg/sqcm complete as required. Capacity 25 litres |
| 472 | Supply, installation, testing and commissioning built with Drinking Water R.O. unit with micron filtration pre-treatment unit, skid mounted R.O. module with pressure pump and pressure tank, drinking water cooler (High quality SS Tank for Storage 80 lts) , complete in all respects. |
| 473 | DRAINAGE WORK |
| 474 | Providing, Fixing, testing and commissioning of UPVC pipe SWR type 'B' conforms to IS : 13592-1992 with all fittings such as bends, tees, elbow, 'Y', offset, cleaning pipe door, clamps and steel structural supports etc. including cutting the floors, walls and making good the same in cement concrete 1:2:4 & cement mortar 1:4. The wall thickness of pipe and technical characteristic conforms to IS : 13592-1992 type 'B'. The fitting dimension conforming to IS : 14735-1999. The jointing to be completed with rubber ring joint/solvent weld joint. (soil waste and rain water pipe) |
| 475 | 75 mm diameter pipe |
| 476 | 100 mm diameter pipe |
| 477 | 160 mm diameter pipe |
| 478 | Providing, Fixing, testing and commissioning of UPVC 'P' trap/floor trap/urinal trap of self cleansing design with or without horn conforming to IS : 14735-1999 including setting with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 hard stone ballast 20 mm nominal size) cutting and making good the walls & floors. 110 mm (OD) x 110 mm (OD) |
| 479 | Providing, fixing & testing uPVC pipes, conforming to IS 4985 class 3 (6 kg/cm2) including injection moulded fittings, jointing with solvent cement, cutting and making good the floors and walls and jointing to trap/waste pipe, complete of outer dia. (Indirect waste) 40 mm diameter pipe |
| 480 | Providing, Fixing UPVC floor drain including all fitting and accessories fixed in cement mortar complete in all respect. 110 mm OD x 63 mm OD |
| 481 | Providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25 mm waste hole |
| 482 | Providing, fixing and testing of uPVC SWR inlet fittings with two or three saddle inlets of 40, 50 or 75 mm size, fabricated from 110 mm outer dia uPVC pipes and fixed to uPVC traps with solvent cement joint complete in all respect. |
| 483 | Providing & fixing uPVC clean out plug with suitable opening with threaded uPVC socket fixed to uPVC pipe joints as required complete in all respects. 110 mm dia |
| 484 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) alround 100mm dia. SW / CI / waste pipes including bed concrete as per standard design |
| 485 | WATER SUPPLY WORK |
| 486 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 487 | Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (Exposed on wall Terrace) |
| 488 | 20 mm dia, nominal bore |
| 489 | 25 mm dia, nominal bore |
| 490 | 32 mm dia, nominal bore |
| 491 | 40 mm dia, nominal bore |
| 492 | 50 mm dia, nominal bore |
| 493 | 65 mm dia, nominal bore |
| 494 | 80 mm dia, nominal bore |
| 495 | Making connection of GI distribution branch with GI main of 50-80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete. |
| 496 | 25 to 40 mm nominal bore |
| 497 | 50 to 80 mm nominal bore |
| 498 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) |
| 499 | 20mm nominal bore |
| 500 | 25 mm dia, nominal bore |
| 501 | 32 mm dia, nominal bore |
| 502 | 40 mm dia, nominal bore |
| 503 | 50mm nominal bore |
| 504 | 65mm nominal bore |
| 505 | Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality |
| 506 | 20 mm dia, nominal bore |
| 507 | 25 mm dia, nominal bore |
| 508 | 32 mm dia, nominal bore |
| 509 | 40 mm dia, nominal bore |
| 510 | 50 mm dia, nominal bore |
| 511 | 65 mm dia, nominal bore |
| 512 | 80 mm dia, nominal bore |
| 513 | Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete. |
| 514 | 20mm nominal bore |
| 515 | 25mm nominal bore |
| 516 | 32mm nominal bore |
| 517 | 40mm nominal bore |
| 518 | 50mm nominal bore |
| 519 | 65mm nominal bore |
| 520 | 80mm nominal bore |
| 521 | Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includesjointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction of Engineer in Charge.(Concealed work including cutting chases and making good the walls etc.) |
| 522 | 15mm nominal outer dia. Pipes. |
| 523 | 20mm nominal outer dia. Pipes. |
| 524 | 25mm nominal outer dia. Pipes. |
| 525 | 32mm nominal outer dia. Pipes. |
| 526 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 50mm diameter |
| 527 | Providing and fixing Bronze compact(Screwed) Diaphram type pressure reducing valve (PRV) with strainer deliverying desired rate of flow. The complete system is tested to a pressure not less than 16 Kg / Sq.cm and suitable to reduce the pressure upto 1 Kg/Sq.cm) including flanges / unions, nuts, bolts and washers complete as required. |
| 528 | 15 mm dia |
| 529 | 20 mm dia |
| 530 | 25 mm dia |
| 531 | 40 mm dia |
| 532 | 50 mm dia |
| 533 | Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified 100 mm nominal bore |
| 534 | 50 mm dia. |
| 535 | 65 mm dia. |
| 536 | 80 mm dia. |
| 537 | 100 mm dia. |
| 538 | Constructing masonry Chamber 60x45x50 cm,inside with 75 class designation brick work in cement mortar 1:5 (1 cement:5 fine sand) for water meter complete with C.I. Doble flap surface box 400x200x200mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. With F.P.S. bricks |
| 539 | Providing and fixing M.S fabricated hot dipped galvanized coating puddle flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to 50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of required size including cutting holes in centre of plate, inserting pipe & making welded (Arc) joint complete. Same shall be installed with TEC welded joint in position with reinforcement bars of RCC tank wall/slab including making cutout in shuttering during concrete casting of tank of following diameter. (Under Ground Overhead Tanks.) |
| 540 | 25mm dia pipe, 600mm long with size of 250x250x6 mm MS plate |
| 541 | 32mm dia pipe, 600mm long with size of 250x250x6 mm MS plate |
| 542 | 40mm dia pipe, 600mm long with size of 300x300x6 mm MS plate |
| 543 | 50mm dia pipe, 600mm long with size of 300x300x6 mm MS plate |
| 544 | 65mm dia pipe, 600mm long with size of 350x350x6 mm MS plate |
| 545 | 80mm dia pipe, 600mm long with size of 400x400x6 mm MS plate |
| 546 | 100mm dia pipe, 600mm long with size of 400x400x6 mm MS plate |
| 547 | 150mm dia pipe, 600mm long with size of 450x450x6 mm MS plate |
| 548 | 200mm dia pipe, 600mm long with size of 450x450x6 mm MS plate |
| 549 | EXTERNAL WATER SUPPLY |
| 550 | Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified 100 mm nominal bore |
| 551 | 50 mm dia. |
| 552 | 65 mm dia. |
| 553 | 80 mm dia. |
| 554 | 100 mm dia. |
| 555 | Providing, laying, Jointing, Testing and commissioning of uPVC pressure pipes of 10Kg/Sqcm pressure rating class 5 (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead upto 50m complete, compaction and consolidation Including laying cement concrete 1:2:4 alround UPVC pipe including bed concrete and thrust blocks at bends as per standard design. |
| 556 | 25 OD mm. |
| 557 | 32 OD mm. |
| 558 | 40 OD mm |
| 559 | 50 OD mm |
| 560 | 63 OD mm |
| 561 | Providing & Fixing of Garden hydrant outlet consisting 1 No. 25mm dia. Ball valve,( Brass) for connecting rubber hose, pipes & fittings. |
| 562 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) |
| 563 | 20mm nominal bore |
| 564 | 25 mm dia, nominal bore |
| 565 | 32 mm dia, nominal bore |
| 566 | 40 mm dia, nominal bore |
| 567 | 50mm nominal bore |
| 568 | 65mm nominal bore |
| 569 | Constructing masonry Chamber 60x45x50 cm,inside with 75 class designation brick work in cement mortar 1:5 (1 cement:5 fine sand) for water meter complete with C.I. Doble flap surface box 400x200x200mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. With F.P.S. bricks |
| 570 | EXTERNAL SEWERAGE & DRAINAGE INSTALLATIONS UPTO MAIN ROAD FIRST MANHOLE |
| 571 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete: |
| 572 | 150 mm diameter |
| 573 | 200 mm diameter |
| 574 | 250 mm diameter |
| 575 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: |
| 576 | 150 mm diameter S.W. pipe |
| 577 | 200 mm diameter S.W. pipe |
| 578 | 250 mm diameter S.W. pipe |
| 579 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : |
| 580 | 150 mm diameter S.W. pipe / RCC pipe |
| 581 | 200 mm diameter S.W. pipe / RCC pipe |
| 582 | 250 mm diameter S.W. pipe / RCC pipe |
| 583 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 180 x 150mm size P-type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 584 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : |
| 585 | 150 mm dia. R.C.C. pipe |
| 586 | 250 mm dia. R.C.C. pipe |
| 587 | 300 mm dia. R.C.C. pipe |
| 588 | 450 mm dia. R.C.C. pipe |
| 589 | 500 mm dia. R.C.C. pipe |
| 590 | 600 mm dia. R.C.C. pipe |
| 591 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
| 592 | Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimensiions total weight of cover and frame to be not less than 38 Kg. ( weight of cover 23 Kg. and weight of frame 15 Kg.), with FPS bricks with class designation 7.5 |
| 593 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 594 | Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 595 | Extra for depth for manholes: Size 90 x 80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 596 | Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 597 | Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : |
| 598 | 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately): |
| 599 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 600 | Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 601 | Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : |
| 602 | 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : |
| 603 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 604 | Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 605 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. |
| 606 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality HD - 20 Circular shape 560 mm internal diameter |
| 607 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : |
| 608 | For pipes 100 to 250 mm diameter |
| 609 | For pipes 350 to 450 mm diameter |
| 610 | Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450mm precast RCC horizontal grating with frame complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 611 | Providing and fixing F.R.P. Grating drain cover M.S. Angle ( 35 x35 x 5 mm). ( Load Bearing cap. 5 T, suitable for car parking, basement, Pump room, Parking Area ). 377mm wide and 30mm thick |
| 612 | Effluent Treatment Plant 10 KLD (OPD ) |
| 613 | Design, Supplying, installing, testing & commissioning of Effluent Treatment Plant of 10 KLD (excluding excavation, back filling & disposal of surplus earth and Civil construction work) for the following duty: (OPD BLOCK) |
| 614 | Effluent from OT Scrubs, blood bank, labs etc. Some solvent/ chemical waste originating typically from hospital complex shall also be discharged into the ETP. Design to take consideration of same. |
| 615 | INLET EFFLUENT CHARACTERSTICS |
| 616 | PH : 5.5 - 9.0 |
| 617 | BOD : 250 - 600 mg/l |
| 618 | S. Solids : 200 - 650 Mg/l |
| 619 | COD : 600 - 1200 mg/l |
| 620 | Oil & Grease : 50-140 mg/L |
| 621 | Effluent discharge standard after treatment |
| 622 | pH - 6.0 – 8.5 |
| 623 | BOD - Less than 150 Mg/L |
| 624 | S. Solids - Less than or equal to 100 Mg/L |
| 625 | COD - Less than or equal to 300 Mg/L |
| 626 | Oil & Grease - Less than 5 Mg/L |
| 627 | Effluent treatment plant shall include the following items: |
| 628 | Screen Chamber |
| 629 | Equalization tank/sump |
| 630 | Primary Tube Settler |
| 631 | Dosing System |
| 632 | Sludge Holding Tank |
| 633 | UV System |
| 634 | Air Blowers, Pumps & equipment |
| 635 | Piping, valves etc |
| 636 | Clarified Water tank |
| 637 | Electrical Panel & Cabling |
| 638 | Note: |
| 639 | Contractor shall ensure submission of detailed GA drawings (Plan & Section), P&I diagram, schematic diagram for the above said component and additional component if so required for the complete working of the ETP for the full capacity. |
| 640 | FIRE FIGHTING WORKS |
| 641 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) |
| 642 | Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520. |
| 643 | Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. |
| 644 | M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. |
| 645 | Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 646 | 900 lpm at 35 m Head |
| 647 | Supplying,Installation,testing & commissioning of dust & vermin proof double door with canopy type taperd roof wall / floor mounted compartmentlised feeder piller type cubical control Panel for fire fighting terrace pump of front area not less than 1.0 Sqmtr. and depth not less than 300 mm, made out of 2mm thick CRCA sheet with 100 Amp. 4 strip aluminium bus bars with front openable door & locking arrangement, interconnection, control wiring, intrigation with pressure switch i/c suppying & fixing following switchgears & control gears/starters etc. as required. |
| 648 | Incomming |
| 649 | 63 Amps. TP & N SFC with HRC fuses |
| 650 | Voltmeter (0-500 Volt) with selector switch. |
| 651 | Ammeter (0-60 Amps.) with selector switch & CTs. |
| 652 | Set of 3 phase indication lamp |
| 653 | Suitable HP fully automatic Star/Delta Starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation. |
| 654 | Selector switch for local/remote, auto/manual/off operation ON/OFF indication etc. |
| 655 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. It should be complete as per specifications & directions of Engineer-in-charge. 3 X 10 sq. mm (22mm) |
| 656 | 4 core, 10 sq.mm. Aluminium Armoured |
| 657 | Supply and fixing in position 1 m wide Insulation mat made of elastomeric polymers Material (Class -A) of 415V grade as per IS 15642-2006 . Thickness of insulation mat shall be not less than 2 mm to withstand 1.1 KV dielectric strength AS PER IS 15652 : 2006. It should be complete as per specifications & directions of Engineer-in-charge. |
| 658 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. ( For Underground ) |
| 659 | 150 mm. Dia |
| 660 | 100 mm. Dia |
| 661 | 80 mm. Dia |
| 662 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor) |
| 663 | 25 mm dia |
| 664 | 32 mm dia |
| 665 | 40 mm dia |
| 666 | 50 mm dia |
| 667 | 65 mm dia |
| 668 | 80 mm dia |
| 669 | 100 mm dia |
| 670 | 150 mm dia |
| 671 | 200 mm dia (wall thickness 6.3 mm) |
| 672 | 250 mm dia (wall thickness 6.3 mm) |
| 673 | 300 mm dia (wall thickness 7.1 mm) |
| 674 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal |
| 675 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal |
| 676 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 677 | 50mm dia |
| 678 | 65mm dia |
| 679 | 80 mm dia |
| 680 | 100 mm dia |
| 681 | 150 mm dia |
| 682 | 200 mm dia |
| 683 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. |
| 684 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : |
| 685 | 65 mm dia |
| 686 | 80 mm dia |
| 687 | 100 mm dia |
| 688 | 150 mm dia |
| 689 | 200 mm dia |
| 690 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. |
| 691 | 100 mm dia |
| 692 | 150 mm dia |
| 693 | 200 mm dia |
| 694 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal |
| 695 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 40 m |
| 696 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal |
| 697 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : |
| 698 | 2 way-100 mm dia M.S. Pipe. (FOR UG TANK) |
| 699 | 4 way - 150 mm dia M.S. Pipe. (FOR UG TANK & EXTERNAL RING MAIN) |
| 700 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. |
| 701 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : |
| 702 | Pendent Sprinkler |
| 703 | Upright Sprinkler |
| 704 | Horizontal side wall sprinkler |
| 705 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 706 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. |
| 707 | 100mm dia |
| 708 | 150mm dia |
| 709 | Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : 150mm dia |
| 710 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. |
| 711 | 700 mm |
| 712 | 1000 mm |
| 713 | Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required. 80 mm dia |
| 714 | Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass, BSPT, K-factor as per design consideration complete as required. |
| 715 | Providing, installation, testing & commissioning of electric release trim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24 volts DC supply complete as required. |
| 716 | Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required. |
| 717 | Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required |
| 718 | Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete. |
| 719 | Providing & Fixing of MS door made up of 16 gauge MS Sheet capable of accommodating fire hose reel, landing valve, hose pipes, fittings, 1 No. CO2 & 1 No. Dry podwer type portable fire extinguishers & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with one coat of primer & two coat of finished stove enamelled post office red colour paint & \\"FIRE HOSE\\" written on front.(Approx. size of door: 2100 mm HEIGHT, WIDTH OF DOOR AS PER SHAFT SIZE ) |
| 720 | Providing and fixing hose cabinet of size 750mmX600X250mm made of 16 gause thick MS sheet with 4 mm thick float glass doors in front painted \\"FIRE\\" in red paint i/c recessary locking arrangement suitable to accommodate external hydrant with butterfly valve 2 nos. 15 mtr. long hose pipe. 1 no. brach pipe mounted on wall or raised brick platform & duly painted with post office red externally and white internally with synthetic enamel paint complete in all respects for external hydrant. as directed by Engineer-in-Charge. |
| 721 | Pressure VesselSupplying, installing, testing and commissioning of pressure vessel for pressurization of fire system complete with valves at outlet / drain to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, outside with one coat of primer & two coats of synthetic enamel paint of approved shade complete as required to operate commonly main fire pump, sprinkler pump & jockey pump at drop of pressure, automatically at required pressure setting. Complete as per manufacturer's specifications & as directed by Engineer- in-charge.working pressure:- 11 kg/sqcmtest pressure: 20 kg/sqcm (450 mm dia & 2000 mm height) |
| 722 | Providing, Fixing, testing and commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 11 Kg/cm2 and test pressure 16 Kg/cm2 to provide relief from stresses at pipe flanges. |
| 723 | 150 mm dia |
| 724 | 80 mm dia |
| 725 | Supply, fixing, testing and commissioning of screwed type brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 & spindle AISI 410) with setting & gland of superior quality having minimum working pressure of 16 kg/sqcm. 25 mm Dia |
| 726 | Providing and fixing 25 mm dia inspection & testing assembly with gun metal ball valve, gun metal sight glass ,Reducer ,union, G.I PIPE. connection to drain pipe/riser. |
| 727 | Providing & fixing cast iron 100 mm dia. Foot valve with nuts, bolts, 1.5 mm thick CAF gasket complete with all accessories (To be provided into UG Fire Water Tanks). |
| 728 | Supply and fixing of 4 Nos G.I round bottom FIRE BUCKET of 9 LTR. Capacity field with sand including proper supporting /mounting arrangement MS Angle Iron Frame painted by fire red colour over 2 coats of red oxide paint and written with white paint FIRE complete in all respects as per direction of Engineer Incharge . |
| 729 | Providing, fixing water flow meter on test line complete with all accessories for flow indication , monitoring & testing of fire pumps with bypass arrangment including piping & bypass valves. 150 mm dia |
| 730 | Providing and Fixing of CO2 Portable 4.5 Kg Fire extinguisher, Carbon-Dioxide type Flat base Horn Including Valve, High Pressure Rubber Wire Braided Discharge Hose of not less than 10 mm dia. & complete in all respects including initial fill with CO2 Gas confirming to IS:15222. and IS 15683:2018 Marked.Location : Inside FHC, Parking Area, Electrical Room, Pump Room, |
| 731 | Supply & Fixing of 6 Kg ABC MAP-50% Powder based Fire Extinguisher, Applicable Fire Class A, B & C, EPDM Rubber Hose, NRV Valve and Helium Leak Detection Tested, Internal Coating - Epoxy Powder and External Pure Polyester Powder Coated (UV resistant), IS 15683:2018 Marked.Location : Open General Area, Inside FHC, Parking Area, Basement |
| 732 | Supply & Fixing of 9 Kg ABC MAP-50% Powder based Fire Extinguisher, Applicable Fire Class A, B & C, EPDM Rubber Hose, NRV Valve and Helium Leak Detection Tested, Internal Coating - Epoxy Powder and External Pure Polyester Powder Coated (UV resistant), IS 15683:2018 Marked.Location : Open General Area, Inside FHC, Parking Area,Basement |
| 733 | Providing and Fixing of Portable 4kg Clean Agent HFC-236fa Fire Extinguisher, Gas UL Listed under EPA SNAP, EPDM Rubber Hose, NRV Valve and Helium Leak Detection Tested, Internal Coating - Epoxy Powder and External Pure Polyester Powder Coated (UV resistant), Suitable for Class A,B and C & Electrically Started Fires, Conforming to IS 15683:2018 Marked.Location : General Office Area, Inside of Critical Roomsi.e. Server Room, UPS Near Rooms, Fire Control Room etc. |
| 734 | Providing, fixing of 60 Ltr Mechanical Foam (AFFF-6%, Confirms to IS 4989 (Part-II), Trolley Mounted Fire Extinguishers, Fitted with 4 Metre EPDM Hose with SS Spring of 300mm & Air Aspirated Nozzle, CO2 Gas Cartridge of 300 Grams. Confirms to IS 4947, Brass Forged Cap, including all accessories complete in all respect. Applicable on Class A & B Fire, IS 16018:2012 Marked & CE Approved.Location : Near HSD Tank, DG Area |
| 735 | HVAC WORKS |
| 736 | AIR HANDLING UNITS FOR OPERATION THEATRES (Refrigerant Based) |
| 737 | Supply, Installation, Testing & Commissioning of factory built floor mounted refrigerant based compatible with VRF outdoor unit double skin type horizontal/ vertical air handling units made of 25 mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8 mm outside layer and 0.8 mm inside layer with polyeurethene foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/ PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5 mm) cooling coil of 6 row deep, filter section with 50 mm thick metal viscous / washable synthetic type air pre-filters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415±10% volts, 50 Hz, 3 phase AC supply suitably designed for variable frequency drive applications, drain connections, stainless steel (18G) drain pan with PUF insulation, 150 mm complete with vibration isolation arrangement etc. complete as per specification and of following capacity. |
| 738 | Inside OT to be maintained 20⁰C ± 2⁰C with corresponding relative humidity between 50% to 60%, noise level: 50 decibels +/- 5. Appropriate devices should be installed inside OT to monitor and display these conditions. Cleanliness: Overall CLASS 10000 - ISO CLASS 7, particle retention: 0.3 micron & above – at discharge, airflow velocity: 25-35 feet per minute at downstream side, differential pressure: The minimum positive pressure recommended is 2.5 Pa (0.01 inches of water), air changes proposed: 20 Air changes per hour minimum out of which 4 fresh air changes, air velocity at the HEPA: 90 to 120 fpm as per NABH standard, heater assembly with humidity sensor & controller. |
| 739 | Floor Mounted: AHU - 3400 CFM, 125 SP (mm wg) |
| 740 | VRF Outdoor Unit |
| 741 | Supply, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/ Variable Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having 100% hermetically sealed inverter type twin Rotary/Scroll Compressor(s),minimum two compressors (with individual separate PCB) for above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with suitable foundation etc. complete as required. To have better efficiency condenser fan shall be capable to operate at different speed with respect to load. The unit shall deliver the rated capacity and in confirmation as per IS 18728:2024 and CPWDSpecifications and work even at 50°C ambient temperature without tripping. The system shall be able to deliver 100% of the rated capacity upto 39 Degree Celcius.The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with first charge of the refrigerant and ready for use as required. The condenser should be coated with a hydrophilic film to prevent water accumulation on the surface of the heat exchanger, enhance water dispersion, and reduce the risk of degradation, thereby improving overall performance and durability. The Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy Conservation and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD specification, connections, inter connections etc. as required. (For capacity <40 kWr ISEER 6.4, Capacity > 40 and <70 ISEER 6.5, Capacity > 70 ISEER 6.6 for ECSBC+ Building)For Cooling |
| 742 | Outdoor Unit Capacity: 14 HP |
| 743 | AHU Connection Kit for connecting AHU with VRF outdoor |
| 744 | Supplying, installing, testing and commissioning of Ceiling Mounted Laminar Air Flow Plenum, made of SS304 with 6 nos. of terminal mini-pleat HEPA filer (H-13, medical grade type), efficiency 99.99% down to 0.3 micron with cut out for OT light in the middle. Plenum Size: 2400 mm x 1800 mm |
| 745 | Supply, installation, balancing and commissioning of fabricated at site aluminium sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbow, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. |
| 746 | Aluminium Ducting 24 G - 0.80 mm |
| 747 | Aluminium Ducting 22 G - 0.63 mm |
| 748 | supply & fixing of accoustic lining of supply air duct with 25 mm thick resign bonded glasswool having density of 32 Kg/ m³, with 25 x 25 GI section of 1.25 mm thick, at centre to centre covered with reinforced plastic tissue paper & 0.5 mm thick perforated aluminium sheet fixed to inside surface of duct with cadmium plated nuts, bolts, stock pins, CPRX compund etc. complete as per specification. |
| 749 | Supply and fixing of following thickness duly laminated aluminium foil of mat finish closed cell Nitrile rubber class O insulation on ducts after applying suitable adhesive for nitrile rubber. The joints shall be sealed 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. |
| 750 | 19 mm |
| 751 | 25 mm (for exposed ducts) |
| 752 | Supplying and fixing of powder coated extruded aluminium return air grills with louvers but without volume control dampers complete as required |
| 753 | Supply, installation, testing and commissioning of aluminium volume control damper complete with neoprene rubber gaskets, nuts, bolts, screw linkages, flanges etc. as per specifications |
| 754 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required: |
| 755 | Size: 12.7 mm |
| 756 | Size: 25.4 mm |
| 757 | Supply, installation, testing and commussioning of communication cable between Outdoor and AHU with protective hard PVC conduit over it. Size: 2C x 1.5 sqmm |
| 758 | Supply, installation, testing and commissioning of CPVC drain pipe, complete with bend & joints and 13 mm thick tubular insulation cover on itSize: 32 mm |
| 759 | Installation, testing & commissioning entire HVAC system complete with nitrogen flusing, vacuuming, leak testing & commissioning |
| 760 | Outdoor unit |
| 761 | Air handling unit |
| 762 | Supply, fabrication, installation and testing the flexible connections constructed of fire resistance flexible double canvas sleeve with sandwitched 25 mm thick fibreglass insulation as per the approved shop drawings. |
| 763 | Supplying and installing following sizes of perforated hot dipped galvanized iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from ceiling with G.I. suspenders including G.I. bolts & nuts etc. as requiredSize: 300 mm width x 50 mm depth x 1.6 mm thickness |
| 764 | Lifting shifting of entire materials to respective position from ground floor storage location with labour and required equipments as per standard |
| 765 | Providing and fixing of following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuse including drilling holes in cubical panel, making connections etc. as required |
| 766 | For AHU - 32 Amps |
| 767 | For VRF Outdoor - 63 Amps |
| 768 | Laying of PVC insulated and PVC sheathed/ XLPE power cable from existing panel to air handling unit should run through cable try as per specificationSize: 10 sqmm x 4C copper |
| 769 | Laying of PVC insulated and PVC sheathed/ XLPE power cable from existing panel to VRF outdoor unit should run through cable try as per specificationSize: 16 sqmm x 4C copper |
| 770 | Construction of concrete base for Outdoor units with affixed nuts to be fixed on four sides of outdoor units. There should be water passage between 2 outdoor bases for rain water to darin easily. |
| 771 | Construction of concrete base for air handling units with affixed nuts to be fixed on four sides of outdoor units. There should be water passage between 2 outdoor bases for rain water to darin easily. |
| 772 | HI - WALL SPLIT SYSTEMS |
| 773 | Supply , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R- 407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature). |
| 774 | 1.0 TR with 5 Star BEE Rating |
| 775 | 1.5 TR with 5 Star BEE Rating |
| 776 | 2.0 TR with 5 Star BEE Rating |
| 777 | Supplying, Installation, Testing and Commissioning of air cooled ducted split type air conditioning machine with each having a capacity and details as mentioned below suitable for operation on R 32/R-410A /R-407 Green refrigerant comprising of Scroll type compressor hermatically sealed complete with automatic capacity, safety switches, lubrication system with min 5 year (OEM) warranty for both compressor and Printed Circuit Board (PCB) , Suitable capacity squirrel cage induction motor having class 'B' insulation suitable for operation on 415 + 10% volts, 50 Hz, A.C. supply for Blower motor, Necessary drive arrangement for blower motor, Matching Air cooled condenser with necessary fittings for refrigerant piping connections, necessary structural support for mounting condensers, Microprocessor based control panel complete with accessories, machine Isolation / disconnect switch, valves and accessories to inter connect compressor and condenser including pressure testing, vacuum. Necessary starters suitable for Indoor & outdoor unit complete with O/L ,U/V, phase reversal protection, single phase preventors i/c copper conductor control and power cable and drain pipe of suitable size and length etc complete as required. The total cooling capacity/heating capacity of tested unit shall have a capacity as per relevant IS code. The lab testing reports as per IS: 8148 shall be submittedfrom National Accreditation Board for Testing and Calibration Laboratories (NABL) accredited as per ISO/International Electrotechnical Commission (IEC) 17025 standards / Central Power Research Institute (CPRI)/Electrical Research and Development Association (ERDA)with Original Equipment Manufacturer (OEM) etc. complete as per CPWD specification as required. |
| 778 | 3.5 TR (3.2 EER) |
| 779 | 4.0 TR (3.2 EER) |
| 780 | 5.5 TR (3.2 EER) |
| 781 | 8.5 TR (3.2 EER) |
| 782 | Supplying, Installation, Testing and Commissioning of Air Cooled Cassette type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), R-32/R410A/R-407 Green Refrigerant, wireless Remote, inbuilt drain pump, suitable for 400/230V, 50 Hz ,1 /3 phase AC supply, including surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 5.5 Mtr (IDU to ODU), copper power and control cable upto 5.5 Mtr (IDU to ODU) including drainpipe, the system shall be capable of performing cooling, dehumidification, Air circulation, filteration & ventilation of following capacity with Scroll/rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB) as specified. The system shall be able to deliver 100% of the rated capacity as per relevant IS Code. The lab testing reports as per IS: 1391 shall be submitted from National Accreditation Board for Testing and Calibration Laboratories (NABL) accredited as per International Electrotechnica Commission (IEC) 17025 standards/Central Power Research Institute (CPRI)/ Electrical Research and Development Association (ERDA)with Original Equipment Manufacturer (OEM) etc. complete as per CPWD specification and as per IS: 1391 as required. |
| 783 | 1.5 TR with 5 Star BEE Rating |
| 784 | 2.0 TR with 5 Star BEE Rating |
| 785 | HORTICULTURE WORKS |
| 786 | Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment). |
| 787 | Supplying and stacking at site dump manure from approved source, including carriage up to 1.0 km (manure measured in stacks will be reduced by 8% for payment) |
| 788 | Screened through sieve of IS designation 20 mm |
| 789 | Screened through sieve of IS designation 16 mm |
| 790 | Screened through sieve of IS designation 4.75 mm |
| 791 | Supplying and stacking of well decayed cow dung manure at site including royalty and carriage up to 1.0 km (cow dung manure measured in stacks will reduced by 8% for Payment) |
| 792 | Fine dressing of the ground |
| 793 | Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-in-charge |
| 794 | Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Engineer-in-charge (cost of sludge, dump manure and / or good earth to be paid separately). |
| 795 | Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts |
| 796 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) |
| 797 | Holes 1.2 m diameter and 1.2 m deep |
| 798 | Holes 90 cm diameter and 90 cm deep |
| 799 | Holes 60 cm diameter and 60 cm deep |
| 800 | Holes 45 cm diameter and 45 cm deep |
| 801 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing, weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. |
| 802 | Providing and stacking of Delonix regia (Gulmohar) height 150-165 cm. in poly bag size 25 cm as per direction of the officer-in-charge.Gulmohar / April fool |
| 803 | Providing and stacking of Cassia fistula (Amaltash) height 120-135 cm. in poly bag size 25 cm as per direction of the officer-in-charge.Amaltash |
| 804 | Providing and stacking of Ficus benghalensis (Banyan) height 120-135cm. in poly bag size 25 cm as per direction of the officer-in-charge.Makchund |
| 805 | Providing and stacking of Ficus religiosa (Peepal) height 150-165 cm. in poly bag size 30 cm as per direction of the officer-in-charge.peepal |
| 806 | Providing and stacking of Ficus benghalensis (Banyan) height 120-135 cm. in poly bag size 25 cm as per direction of the officer-in-charge.bargad / banyan |
| 807 | Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pot / Plastic pot as per direction of the officer-in-charge.raat rani |
| 808 | Providing and stacking of Azadirachta indica ( Neem ) height 120-130cm in polybag size 25 cm as per direction of the officer-in-charge.Neem |
| 809 | Providing and stacking of Bauhinia purpurea (Kachnar) height 150-165 cm. in poly bag size 25 cm as per direction of the officer-in-charge.Kachnar |
| 810 | Providing and stacking of Callistemon lanceolatus height 150-165 cm. in poly bag size 25 cm as per direction of the officer-in-charge.Bottle brush |
| 811 | Providing and stacking of Spathodea campanulata height 150-165 cm. in poly bag size 25 cm as per direction of the officer-in-charge.rugtoora |
| 812 | Providing and stacking of Plumeria alba height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bag as per direction of the officer-in-charge.white champa |
| 813 | Providing and stacking of Plumeria rubara height 120-150 cm., 3-4 branches and thick stem in big size HDPE bag as per direction of the officer-in-charge.pink champa |
| 814 | Providing and stacking of Largerstroemia indica of height 90-105 cm. multibranched in poly bag of size 25 cm as per direction of the officer in-charge.jarul |
| 815 | Providing and stacking of Polyalthia longifolia (Ashok) height 150-165 cm. in earthen pot size 25 cm as per direction of the officer-in-charge.Ashok |
| 816 | Providing and stacking of Tectona grandis (Teak) height 150-165 cm. in polybag size 25 cm as per direction of the officer-in-charge.sal |
| 817 | Providing and stacking of Tamarindus indica (Imli) height 120-150 cm. in polybag size 25 cm as per direction of the officer-in-charge.Imli |
| 818 | Providing and stacking of Mangifera indica (Mango-grafted ) height 60 75 cm. in poly bag size 25 cm as per direction of the officer-in-charge.Mango |
| 819 | Providing and stacking of Eugenia jambolana (Jamun) height 150-165 cm. in poly bag size 25 cm as per direction of the officer-in-charge.Jamun |
| 820 | Providing and stacking of Phyllanthus emblica (Amla) height 150-165 cm. in big HDPE Bag as per direction of the officer-in-charge.Amla |
| 821 | Providing and stacking of Foxtail palm ht. 240-270 cm bottom girth 35 40 cm well developed in big size HDPE bag as per direction of the officer-in-charge. |
| 822 | Providing and stacking of Bottle palm ht. 210-240 cm bottom girth 30 35 cm well developed in big HDPE bag as per direction of the officer-in charge. |
| 823 | Providing, stacking and Displaying Bamboo Buddha valley variety with umbrella shape plant having 120 cm to 135 cm ht. plant with fresh & healthy foliage well developed in 40 cm Cement pot/ Plastic pot and as per direction of the officer-in-charge. |
| 824 | Providing and stacking Clerodendrum inerme of ht. 20 cm to 30 cmmulti branched in 20 cm size of Earthen Pot / Plastic Pot and as per direction of the officer-in-charge.Volkameria inermis |
| 825 | Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pot of size 30 cm as per direction of the officer-in-charge. |
| 826 | Providing, stacking and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 cm to 60 cm spread 75 to 90 cm ht. plant, specimen bushy plant,in 35 cm Cement Pot/ Plastic Pot and as per direction of the officer-in-charge.Ficus Starlight |
| 827 | Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pot of size 20 cm as per direction of the officer-in-charge. |
| 828 | Providing and stacking Duranta Golden, having ht. 15 cm to 20 cmbushy shape with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot and as per direction of the officer-in-charge. |
| 829 | Providing and stacking of Hamelia patens of height 30-45 cm. with 3-4 branches in poly bag of size 20 cm as per direction of the officer-in charge. |
| 830 | Providing and stacking of Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pot of size 20 cm as per direction of the officer-in-charge.udhul |
| 831 | Providing, stacking and Displaying Schefflera high colour having ht. 25 cm to 30 cm, well developed with fresh & healthy foliage in 25 cm size of Earthen pot / Plastic pot and as per direction of the officer-in-charge.lady palm |
| 832 | Providing and stacking of Tecoma gaudichaudi of height 45-60 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.Yellow bells |
| 833 | Providing and stacking of Tabernaemontana coronaria (chandnivariegated) of height 45-60 cm. with 3-4 branches earthen pot of size 20 cm as per direction of the officer-in-charge.Chandani |
| 834 | Providing, stacking and Displaying Canna dwarf of height 25 to 30 cm., 2 to 3 suckers in 20 c.m Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 835 | Providing, stacking and Displaying of Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge. |
| 836 | Providing and stacking Alternanthera species of height 15 cm to 20 cm,full of branches and foliage in 15 cm size of Earthen Pot / Plastic Pot and as per direction of the officer-in-charge |
| 837 | Providing and stacking Chlorophytum (Green), full of leafy suckers in 20 cm size of Earthen Pot /Plastic Pot and as per direction of the officer in-charge |
| 838 | Providing and stacking of Jatropha multifida (red colour) of height 45-60 cm. with 2-3 branches in earthen pot of size 20 cm as per direction of the officer-in-charge. |
| 839 | Providing and stacking Asparagus sprengeri of height 30 cm to 45 cm, full of leafy branches in 20 cm size of Earthen Pot / Plastic Pot and as per direction of the officer-in-charge. |
| 840 | Providing and stacking Syngonium (Butterfly) variegated with 2 to 3suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm and as per direction of the officer-in-charge.Syngonium butterfly |
| 841 | Providing and stacking Tradescantia, full of leaves in Earthen Pot/Plastic Pot of size 15 cm and as per direction of the officer-in-charge |
| 842 | Providing & laying of Selection no. 1 Doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same and maintenance for 30 days or more till the grass establish properly, as per direction of the officer-in-charge |
| 843 | MGPS WORK |
| 844 | Supply, Installation, Testing and Commissioning of 6 + 6 size manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D-type) along with Non-Return Valves for every cylinder and copper tail pipes as per Technical Specifications enclosed. |
| 845 | Supply, Installation, Testing and Commissioning of Fully Automatic Control Panel for Oxygen with inlet for Liquid Oxygen Tank, as per Technical Specifications enclosed |
| 846 | Supply, Installation, Testing and Commissioning of 1 + 1 Cylinders Emergency Oxygen Manifold with two stage High flow rate regulator with NRV for every cylinder and copper tail pipes as per Technical Specifications enclosed |
| 847 | Supply, Installation, Testing and Commissioning of Terminal Units (Gas Outlets) with probes/Adaptors ,as per NFPA Standard, Technical Specifications enclosed. |
| 848 | Supply, Installation, Testing and Commissioning of Oxygen Flowmeter with Humidifier Bottle as per Technical Specification enclosed |
| 849 | Supply, Installation, Testing and Commissioning of Oxygen H.P Antiastic rubber tube |
| 850 | Supply, Installation, Testing and Commissioning of Nitrous Oxide System 2 + 2 size manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D-type) along with Non-Return Valves for every cylinder and copper tail pipes . |
| 851 | Supply, Installation, Testing and Commissioning of One Cylinder Emergency N2O Manifold with two stage High flow rate regulator with NRV for every cylinder and copper tail pipes . |
| 852 | Supply, Installation, Testing and Commissioning of Fully Automatic Control Panel for N2O . |
| 853 | Supply, Installation, Testing and Commissioning of Terminal Units (Gas Outlets) with probes/Adaptors as per NFPA |
| 854 | Supply, Installation, Testing and Commissioning of H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded . |
| 855 | Supply, Installation, Testing and Commissioning of Compressed Air System including Duplex 36.66 cfm , 2 HP Motor, air cooled, oil free compressors and Air Drier, After Cooler, Moisture Saprater and 1# Air Receiver & Filteration system as per Technical Specification enclosed, |
| 856 | Supply, Installation, Testing and Commissioning of Terminal Units (Gas Outlets) with probes/Adaptors as per HTM/NFPA standard, Technical Specifications enclosed. |
| 857 | For C.Air ( 4 bar) |
| 858 | For C.Air ( 7 bar) |
| 859 | Supply, Installation, Testing and Commissioning of H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded as per Technical Specification enclosed. |
| 860 | Supply, Installation, Testing and Commissioning of Duplex V X 15 Vacuum Pumps of Ingersoll with Motor each with receiver vessel, with bacteria filter capacity as per Technical Specification enclosed. |
| 861 | Supply, Installation, Testing and Commissioning of Terminal Units (Gas Outlets) with probes/Adaptors as per HTM/NFPA Standard, Technical Specifications enclosed. |
| 862 | Supply, Installation, Testing and Commissioning of Ward Vacuum Unit with Regulator, Collection Jar of 1000 ml with bracket as per Technical Specification enclosed, |
| 863 | Supply, Installation, Testing and Commissioning of H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded as per Technical Specification enclosed. |
| 864 | Supply, Installation, Testing and Commissioning of Combined Electrical Control Panel for Compressed Air System and Vaccum System as per Technical Specification enclosed. |
| 865 | Supply, Installation, Testing and Commissioning of Copper Pipes used will be solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased, manufactured as per EN 1057 part I, Table-X of 1971 and chemical composition as per BS-6017 of 1981, Table 2, Cu-DHP. |
| 866 | 42mm OD X 1.2mm thk |
| 867 | 28mm OD X 1 mm thk |
| 868 | 22mm OD X 0.8 mm thk |
| 869 | 15mm OD X 0.7 mm thk |
| 870 | 12mm OD X 0.7 mm thk |
| 871 | Supply, Installation, Testing and Commissioning of Valves Boxes with Pressure Gauges as per Technical Specifications. |
| 872 | 2 Gas Services ( O2, Air 4) |
| 873 | 3 Gas Services ( O2, Vac, Air 4) |
| 874 | 4 Gas Services (O2,Vac,Air4 & Air7) |
| 875 | Supply, Installation, Testing and Commissioning of Area Alarm as per Technical Specifications enclosed |
| 876 | 2 Gas Services ( O2, Air 4) |
| 877 | 3 Gas Services ( O2, Vac, Air 4) |
| 878 | 4 Gas Services (O2,Vac,Air4 & Air7) |
| 879 | Supply, Installation, Testing and Commissioning of Isolation Valves as per Technical Specifications enclosed |
| 880 | 42mm OD |
| 881 | 28mm OD |
| 882 | 22mm OD |
| 883 | 15mm OD |
| 884 | Supply, Installation, Testing and Commissioning of Horizontal Bed Head Panel (Al Extruded) 4 ft. Long Provision for Gas Outlet, Electrical Switch & Socket, Nurse Call, etc |
| 885 | HOSPITAL FURNITURE |
| 886 | Supply and Installation of FOWLERS BED Plastic/ABS Bed Head Panels Size of 2030 L x 900 W x 600 H Pre trated and Epoxy Powder Coated,Manually Crank Operated with Hi-Lo postion Frame & Plateform should be made of CRCA steel with100 mm Swivel castor |
| 887 | Supply and Installation of EXAMINATION COUCH Plastic/ABS Bed Head Panels Size of 2030 L x 900 W x 600 H Pre trated and Epoxy Powder Coated,Manually Crank Operated with Hi-Lo postion Frame & Plateform should be made of CRCA steel with100 mm Swivel castor |
| 888 | Supply and Installation of BED SIDE LOCKER Single Storgage box,Size of 400 L x 400 Wx 800 mm H epoxy powder coated ,Frame should be CRCA Sheet/Tube closed on threeside with SS top,having two PVC shpe and two 50 mm castors. |
| 889 | Supply and Installation of OVER BED TABLE Frame made of CRCA steel tube with epoxy powder coated,laminated wooden board with adjustable gear.Dimension of top : 750 L x 400 w mm ,Table stand on 50 mm castors. |
| 890 | Supply and Installation of SS STOOL Pre treted epoxy powder coated SS revolving stool made of CRCA steel tube with four leg height adjustable upto 675mm,reinforced with steel frame.Foot rest ring on PVC shoes. |
| 891 | CURTAIN & IV HANGER SYSTEM WORK |
| 892 | Providing and installation of Cubical tracks system made of Powder coated Aluminium alloy track and netted curtain, mounted on the ceiling using Suspension hangers and bushes, powder coated wall bracket and Track Joiners wherever required. This system shall be complete with stain free polyster fabric, Water repellent Curtains having 18\\" Net on top. The curtain shall be approx 7X4 feet, with two curtains stiched together wherever required. Curtains shall also be provided with smooth movement, non sticking runners, with Stainless steel hooks, for easy movement. The system shall have curtain removal points and end cap complete as per technical specifications wherever is required.(Acceptable Makes : Nataso/ Wallprotex/ Med Freshe/ Covoc/Medikraft) |
| 893 | Providing and installation of I.V. Hanger with 5 hooks, made from mirror finish stainless steel, 304 grade with adjustable height, provided with 4/6 feet aluminium alloy track powder coated with endcap of tracks, 1 pc of trolley for smooth IV Hanger movement on track, 2 pcs of suspension hanger powder coated, top & bottom bush, powder coated, for easy fitting and better aesthetics complete as per technical specifications is required.(Acceptable Makes : Nataso/ Wallprotex/ Med Freshe/ Covoc/Medikraft) |
| 894 | ADMINISTRATUVE FURNITURE |
| 895 | Supply and Installation of Insight Table 900W x 900D x 740 H : Worktop 25 mm Thick PLB Tops with 2mm Thick PVCEdge Beading . C-Frame 1.6 mm thick M.S CFrame Supporting the Top. Dia. 38.1 x 1.6 mm thick M.S ERW tube legs . The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications. |
| 896 | UNWIND CHAIR SEAT/BACK (CAFE / ARM I DESKLET / LOUNGE) : Supply and Installation of the Seat and Back-are rnade up of injection moulded high impact strength PolyPropylene polymer compound with indoor grade UV resistance . The tubular welded frame is made from Dia 2.22 ± 0.03 cm x 0.12 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 crn x 0.12 ± 0.0128 cm Stainless Steel 202 grade tube.The tubes are buff polished to give shiny finish. The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications |
| 897 | MATRIX 2 SEATER + 2 SEATER BENCH WITH ARMRESTSDim : 114.5 CM (W) X 63.8 CM (D) X 78.5 CM (H) SEAT SIZE : 47.8 cm (W) x 44.6 cm (D)* BACK SIZE : 41.6 cm (W) x 23.0 cm (H)SEAT SHELL :Supply and Installation of the seat shell is a welded assembly of seat,back and side frame. The seat and back are made of 0.12+0.013cm thk CR steel sheet with oblong perforations. They are welded to sideframe of size 3.240.05cm x 0.5 + 0.05 cm thk HR steel. The welded assembly is powder coated ( DFT 40-60 microns ).The seat has a front water fall edge to provide popliteal clearance for comfortable seating.UNDERSTRUCTURE ASSEMBLY: Understructure assembly consists of connecting beam andleg assembly made of M.S. E.R.W. oblong tube of size 7.5+0.03cm x 2.540.03cm x 0.2+0.016cmthk. The welded structure assembly is powder coated ( DFT 40-60 microns ).The leg assembly is || fitted with shoes and levellers in Nylon. The leg structure is designed with minimal area of contactclose to ground providing easy access for cleaning purposes.The shoes fitted to leg assembly help in aligning the structure for back to back arrangements.Levellers take care of uneven flooring.Connecting beam is fitted with snap locking end cap.It alsoaids in side-by-side understructure alignment.ARM REST ASSEMBLY: Armrest assembly consists of armrest frame and armrest pad . The armrest frame is made up of size 3.175+£0.05cm x 0.4740.027cm thk HR steel and it ispowder coated ( DFT 40-60 microns ). Armrest pad is injection molded in Nylon and is fitted ontothe armrest frame. The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications |
| 898 | PERCH 3 SEATER PUBLIC BENCH CROSS BEAM:Supply and Installation of it is made up ofblack powder coated rectangular M.S.ERW tube having 8.0 ± 0.03 cm x 4.0 ± 0.03 cm x0.2 ± 0.014 cm size.2. LEG AND ARMREST: It is chrome plated made of cold rolled steelwith 0.12 ± 0.013 cm thinkness.3. SEAT BACK SHELL: It is powder-coated perforated shell made from cold rolled M.S. sheet (DIN1623 Part1 ST-12 Grade) 0.15 ± 0.013 cm thickness.The Side Bar is made of Chrome plated solid steel 3.0 ± 0.03 cm x 1.2 ± 0.3 cm with fluting and plastic inserts. The Shell is assembled on the Cross Beam with help of M8 Bolts (Per Seat - 8 nos. Seat to Bracket and 4nos. Bracket to Cross Beam).WIDTH (W): DEPTH (D): HEIGHT (H): SEAT HEIGHT (SH):183.0 CM. 67.0 CM. 77.5 CM 40.0 CM.The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications |
| 899 | CIGNUS DESK 1650 W x 750 D WITH SIDE UNIT AND PEDESTAL Supply and Installation of PrimaryWorkSurface : 1650w x 750d Madeof25mmThickPre-laminatedtwin board ofE1- P2grade and approved shade confirmingtoIS-12823:1990,Edge bandedwith matching2mmthick PVC lipping.SecondaryWorkSurface :900 w x 500d Madeof25mmthickMDFonesidepre-aminate board confirming to IS-14587:1998with0.4mm PVC membrane pressed onto top.Soft closing access flap within-build power boxare provided on worksurface for wire management.Modesty Panel :Made of 25mm thick MDFonesidepre-laminate board confirming to IS- 14587:1998with0.4mm PVC membrane pressed on to top.Under Structure : Madeof25mmThickPre-laminatedtwin board ofE1- P2gradeandapproved shadeconfirmingtoIS-12823:1990,Edge bandedwith matching2mmthick PVClipping.Integrated Pedestal : Made of 25mmThick Pre-laminatedtwin board ofE1- P2gradeandapproved shade confirming toIS-12823:1990,Edge bandedwith matching2mmthick PVClipping.Drawerfronts madeof25mmthickMDFoneside pre- laminateboardconfirming toIS-14587:1998 with0.4mmPVCmembrane pressed on to top Pedstal constructionis BOX-BOX-FILEtype which Uses powdercoated 400MM longmetal PanelDrawerSlides.Drawer extension is 325 MM.Drawers have a soft closing &antislam mechanism.Handles areprovidedforeaseofopening.Pedestalis providedwith lock for security.The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications |
| 900 | 1 SEATER SOFA1) SEAT FOAM:Supply and Installation of the seat is made up of PU foam in Density 28 +2 kg/cu.mtr with an additional top layer ofsupersoft PU foam in Density 32 + 2 kg/cu, upholstered with fabric or leatherette.2) BACK FOAM: The back is made up of PU foam in Density 28 + 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32+2 kg/cu. mtr, upholstered with leatherette.3) UNDERSTRUCTRE : Understructure is made up of 1.2+0.1 cm. thick hot pressed plywood [moistureresistance & termite proof as per 1S:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. 4) LEG ASSEMBLY: It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plasticendcap.WIDTH (W): 86.0 CM.DEPTH (D): 90.5 CM. HEIGHT (H): 85.5 CMThe manufacturer should have BIFMA,IGBC membership,& Greenguard compliance,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications |
| 901 | 3 SEATER SOFA Supply and Installation of 1) SEAT FOAM: The seat is made up of PU foam in Density 28 +2 kg/cu.mtr with an additional top layer ofsupersoft PU foam in Density 32 + 2 kg/cu, upholstered with fabric or leatherette.2) BACK FOAM: The back is made up of PU foam in Density 28 + 2 kg/cu. mtr with two additional top layer ofsupersoft foam of density 32+2 kg/cu. mtr, upholstered with leatherette.3) UNDERSTRUCTRE : Understructure is made up of 1.2+0.1 cm. thick hot pressed plywood [moistureresistance & termite proof as per 1S:303] & pinewood of cross sections devoid of major knots & surface defects.6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose.4) LEG ASSEMBLY: It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plasticendcap.WIDTH (W): 206.0 CM. DEPTH (D): 90.5 CM.HEIGHT (H): 85.5 CM The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications. |
| 902 | FLAIR X COFFEE TABLE Supply and Installation of Dim : 110 CM W X 60 CM D X 45 CM HTop is made of MDF- 18mmthk, with cream shade, bottom shelf made of MDF18mm thk in wenge shade, frame MS in chrome plated . The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications |
| 903 | FLAIR CORNER TABLE Supply and Installation of Dim : 60 CM W X 60 CM D X 55 CM HTop is made of MDF- 18mmthk, with cream shade, bottom shelf made of MDF18mm thk in wenge shade, frame MS in chrome plated . The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications |
| 904 | TOPAZ DESK 1650 W x 750 D WITH SIDE UNIT AND PEDESTAL Supply and Installation of PrimaryWorkSurface : Madeof 25mmThickPre-laminatedtwin board ofE1- P2gradeandapprovedshadeconfirmingto IS-12823:1990,Edge bandedwith matching2mm thick PVC lipping.Grometprovidedonwork surfacefor wiremanagementSecondaryWorkSurface :Madeof25mmThickPre-laminatedtwin board ofE1- P2gradeandapproved shadeconfirmingtoIS-12823:1990,Edge bandedwith matching2mmthick PVClipping.Modesty Panel :Madeof25mmthickMDFonesidepre-laminate boardconfirmingtoIS- 14587:1998with0.4mm PVC membranepressedontotop .Under Structure : Madeof25mmThickPre-laminatedtwin board ofE1- P2gradeandapproved shadeconfirmingtoIS-12823:1990,Edge bandedwith matching2mmthick PVClipping.Integrated Pedestal : Madeof25mmThickPre-laminatedtwin board ofE1- P2gradeandapproved shadeconfirmingtoIS-12823:1990,Edge bandedwith matching2mmthick PVClipping.Drawerfronts madeof25mmthickMDFoneside pre- laminateboardconfirming toIS-14587:1998 with0.4mmPVCmembrane pressedon to topPedstalconstructionis BOX-BOX-FILEtype which Usespowdercoated400MMlongmetalPanelDrawerSlides.Drawer extension is 325 MM.Drawers haveasoftclosing&antislam mechanism.Handles areprovidedforeaseofopening.Pedestalis providedwith lockforsecurity. The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications |
| 905 | Supply and Installation of MINGLE MODULAR CONFERENCE TABLEOVERALL SIZE : 4945 MM X 2465 MM X 740 HWork Surface : Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Plastic ABS access flap is provided for easy access to wires and cables.Under Structure : It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down construction.Modesty Panel : Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It ismade of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns).Wire management : An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated(DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injectionmoulded plastic part polymer component is fitted to pull out audio,video cables ontoworktop and connect devices charger to power socket below worktop..The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications |
| 906 | Supply and Installation of WISH LINEAR WORKSTATION 1200W X 600DLinear Workstation -Size 1200x600mmx1200H : Providing and Placing workstation , Tile/Panel based modular partition system as per specification belowPartition:-Modular Partition shall be Panel Based System of 60mm thick and 1200 mm high factory made of finely tolerance partition both in the main spine and return spine at the ends. The partitions framework shall have horizontal and vertical powder coated Aluminium sections of 1 to 1.2mm thickness. The frame work is joined together horizontally and vertically rigidly. The Vertical & Horizontal tops section are concealed by curved/flat post cover powder coated aluminum profiles of 1.2mm thickness. All 2way, 3way and 4 ways junction is covered with Die cast aluminum powder coated caps having 45-60 microns thickness . The top section of the frame shall be have accessory mounting groove for easy installation of Pen Stands, Paper Rack etc. The wire management shall be through the hollow space of the modular partition having rectangular slots for wires on the upright vertical section and at the bottom which can allow 9 power cable of diameter 10 or 32 data cable of dia 6mm. Raceways of 100mm high made up of Powder coated CRCA are provided at skirting and above/below the worktop. Raceways shall be provided with factory made slots on CNC metal cutting machine as per approved samples of electrical and data plates Raceway is snap fitted with the partition for easy maintenance of wires .The frame work shall be cladded with 9 thick Pre Laminated MDF board of approved colour and texture laminate . Pin up panel of 5 mm-6mm thick soft board as per drawing with fabric of approved quality shall be provided/ White Marker Tile of 5mm thickness . White Marker made up of 5mm MDF with 1mm glossy writable marker laminate/Glass marker made of 4mm tougnened lacquered glass fixed on both side of partition The panel above the work surface to be fabric upholstered panels with 9mm MDF Board cladded with fabric of approved shade. Stability Post. To avoids movement of free standing panels and stability post shall be fitted at the end of the panel. The MS bracket for the post is grouted to the floor with chemically grouted bolts . Modular Partition is provided with adjusatble levellors for adjustments on uneveness on floors.Worktops shall be made up of 25mm Prelaminated MDF board having all edges sealed with 2mm PVC Lipping . 3 Drawer Pwedestal is made up of 2file+1box drawer made up of 18mm prelaminated particle board having all drawers fitted with telescopic channels and locked with central lock and key.Key board is made up of 0.8mm CRCA sheet duly powder coated with 55 microns fitted on telescopic channels .CPU trolley is made up of 0.8mm CRCA sheet having sides adjustable provided with 4 lockable nylon castors . The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications . |
| 907 | Supply and Installation of L SHAPED CUBICLE MANAGER MODULE 1650 W X 1950 Dwith partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magneitc/fabric tackable/ writing board tile. Bottom tiles -Plain metal. INTERMEDIATE BLOCKSIntermediate blocks are given in Fabric finsh.MODESTY PANELS WITH ASSEMBLY LEG - 25 MM THK PLBmodesty has been given on the front of the main worktop which is attached to the partition on one end with gable end bkts and on the other end with metal powder coated frontier leg.legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look.Worksurface - Main table recta out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1650 mm w x 750 mm d and ERU table recta of size 1200 mm w x 450 mm d.Pedestal - WISH pedestal flat metal front, full ht top The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications. |
| 908 | Supply and Installation of ECHO HDU 1200 W X 450 D X 1190 HBody is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to assemble unit and is assembled with suitable KD fittings. The shelves and separator panels ( if available ) is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band.The bottom shelf is fixed and other shelves have one step adjustment for optimizing the space.Doors : Door Panels ae made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the center of the door. The hinge door has suitable hinges and HDU is fitted with an adjustable fitting for height adjustment. HDU has a three point lock,All the storages are fitted with a 6 mm leveler at bottom for leveling. The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications |
| 909 | Supply and Installation of AERO HIGH BACK CHAIR1. SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ± 0.1cm thk. hot pressed plywood OCP QLTA-PL14-18.The Back should be made up of injection moulded glass filled nylon & upholstered using Net fabric with high tenacity yarn.SEAT SIZE: 47.0 cm. (W) x 51.5 cm. (D) BACK SIZE:45.0 cm. (W) x 65.3 cm. (H) 2.HIGH RESILIENCE (HR)POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness 16 ± 2 kgf for 25% compression. 3.ARMRESTS : Theadjustable armrest is designed with the following features: -Up-Down Godrej Furniture Detailsadjustment - 8 steps -Height adjustable armrest structure which is Powder coated & fitted with an armrest top. Fised armrest top is PUmoulded over metal insert. 4.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad withmoulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobsprovided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height.5.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tiilting mechanism is designed with thefollowing features: • 360° revolving type. • 4 - position locking with anti- lock feature. • Single point control • Tilt tension adjustment. • Seat/ back tilting ratio of 1:3 •Front pivot for tilt with free resting on ground ensuring more comfort. 6.PNEUMATICHEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.7.PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass filled Nylon and filled with 5 nos.twon wheel castors.Neckrest : The Neckrest assembly consist of polypropylene pad with moulded polyurethane ,| | foam & covered with polyester fabric. Neckrest is fixed to Back Assembly through Neckrest | || connector. Neckrest assembly has height adjustment of 4.2 + 0.5 cm and rotation adjustment of || overall 76°4 2°. The complete neckrest assembly is retro fit to the main chair. The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications |
| 910 | Supply and Installation of AERO MID BACK CHAIR1. SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ± 0.1cm thk. hot pressed plywood OCP QLTA-PL14-18.The Back should be made up of injection moulded glass filled nylon & upholstered using Net fabric with high tenacity yarn.SEAT SIZE: 47.0 cm. (W) x 51.5 cm. (D) BACK SIZE:45.0 cm. (W) x 65.3 cm. (H) 2.HIGH RESILIENCE (HR)POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness 16 ± 2 kgf for 25% compression. 3.ARMRESTS : Theadjustable armrest is designed with the following features: -Up-Down Godrej Furniture Detailsadjustment - 8 steps -Height adjustable armrest structure which is Powder coated & fitted with an armrest top. Fised armrest top is PU moulded over metal insert. 4.LUMBAR SUPPORTASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumbar pad has an adjustment of8.0 ± 0.5 cm in height. 5.FRONT PIVOT SYNCHROMECHANISM: The adjustable tiilting mechanism is designed with the following features: • 360° revolving type. • 4 - position locking with anti- lock feature. • Single point control • Tilt tension adjustment. • Seat/ back tilting ratio of 1:3 •Front pivot for tilt with free resting on ground ensuring more comfort. 6.PNEUMATICHEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.7.PEDESTAL ASSEMBLY: The pedestal is injection moulded in black30% glass filled Nylon and filled with 5 nos.twon wheel castors. The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications |
| 911 | Supply and Installation of ELITE MID BACK CHAIRSEAT/BACK ASSEMBLY: The seat is made up of 1.2 + 0.1cm thk. hot pressed plywood | : | measured as per QA method described in OCP-QLTA-PL14-18.The Back is made up of injection SEAT SIZE(Larger Seat Depth) : 47.0 cm. (W) x 51.5 cm. (D) BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m? and hardness 16 + 2 kgf as per 1S:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features : Up-Down adjustment- 8 steps (8.040.5cm range) Height adjustable armrest structure which is chrome plated & fitted with an armrest top. Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with , | moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be | | L ! , adjusted through two projecting knobs provided on the rear side of the pad. Lumbar pad has an | | . | adjustment of 8.0 + 0.5 cm.in height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. Single point control mechanism Front-pivot for tilt with feet resting on ground ensuring more comfort. Tilt tension adjustment. 4-position locking with anti-shock feature . The manufacturer should have BIFMA,IGBC membership,& Greenguard compliance ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications |
| 912 | HANDRAIL, CRASHRAIL AND CORNER GUARD |
| 913 | Providing & Fixing 150 series high impact resistant surface mount Corner Guard having VinylSnap on cover (Lead Free) of .080\\" (2mm) thickness shall be extruded from chemical and stain resistant polyvinyl chloride with the addition of impact modifiers No plasticizers shall be added (plasticizers may aid in bacterial growth). Surface shall have a Pebblette texture for scratch resistance. Continuous Aluminum Retainer of .070\\" (1.8mm) thickness shall be fabricated from 6063-T5 aluminum, with a mill finish. Dimensions to be of 3\\" (76mm) x 3\\" (76mm), 90 degree. The rigid vinyl profile shall resist an Impact Strength of 30.2 ft-lbs/inch as per ASTM D-256-90b and shall cis not support fungal or bacterial growth inaccordance with ASTM G-21 and G-22. The system shall also conform to class A fire rating and ASTM D-543 for chemical and stain resistance. It includes Top caps and bottom caps which shall be made of injection molded thermoplastics. |
| 914 | Providing and fixing 700 series superior impact resistance Wall Guard Vinyl (Lead Free) Snap on cover of .080\\" (2mm) thickness shall be extruded from chemical and stain resistant polyvinyl chloride with the addition of impact modifiers. No plasticizers shall be added (plasticizers may aid in bacterial growth) cis. Surface shall have a Pebblette texture for scratch resistannce and Continuous aluminum retainer of .080\\" (2mm) thickness shall be fabricated from 6063-T5 aluminum, with a mill finish. Dimensions to be of 7 3/4\\" (197mm) height x 1\\" (25mm). Inner snap-on vinyl impact black bumper of .080\\" (2mm) thickness x 3.930\\" (100mm) width x 21mm height which shall be extruded from chemical and stain resistant unplasticized polyvinyl] chloride (uPVC). The system shall resist an Impact Strength of 45.5 ft-lbs/inch while producing no visual blemishes upon the vinyl cover surface and no deformations in the aluminum retainers, as tested in accordance with applicable provisions of ASTM F 476-84, paragraph 18, Impact Test and shall not support fungal or bacterial growth inaccordance with ASTM G-21 and G-22. The system shall also conform to class A fire rating and ASTM D-543 for chemical and stain resistance. It shall include standard quantity, as per manufacturer, of Molded End Returns. |
| 915 | Providing and fixing 3110 series Handrail with integrated vinyl wall guard having Rigid Vinyl Snap-on cover (Lead Free) of .080\\" (2mm) thickness extruded from chemical and stain resistant unplasticized polyvinyl chloride (uPVC) with the addition of impact modifiers. No plasticizers shall be added (Plasticizers may aid in bacterial growth). Surface shall have apebblette texture for scratch and stain resistant with rigid vinyl cover mounted on a sturdy continous Aluminium Retainer of .080\\" (2mm) thickness that shall be fabricated from 6063- T5 Aluminium with a mill finsh. Dimesnions to be 6-1/8 \\" (155mm) height x 1-1/2\\" (38mm) full round gripping diameter, system extends 3-1/8\\" (79mm) from the wall. Integrated vinyl cover, 4\\" (101mm) high. Inner snap-on vinyl impact black bumper of .070\\" (1.8mm) thickness and 2-1/4\\" (57mm) high shall be extruded from chemical and stain resistant unplasticized polyvinyl] chloride (uPVC). The system shall resist an Impact strength of 45.5 ft-lbs/inch while producing no visual blemishes upon the vinyl cover surface and no deformations in the aluminum retainers, as tested in accordance with applicable provisions of ASTM F 476-84, paragraph 18, Impact Test cis. The rigid vinyl shall not support fungal or bacterial growth inaccordance with ASTM G-21 and G-22. The system shall also conform to class A fire rating and ASTM D-543 for chemical and stain resistance.It shall include standard quantity, as per manufacturer, of Molded Mounting Brackets/end returns. |
| 916 | SIGNAGES WORK |
| 917 | Providing and fixing Laser Cut 5 mm Acrylic in desired color with Plotter Cut Vinyl Letter as required.4 Feet by 4 Feet |
| 918 | Providing and fixing Laser Cut 5 mm Acrylic Signage with Plotter Cut Vinyl letters pasted above & Desired color vinyl pasted on Back. 4 Inch by 18 Inch |
| 919 | Providing and fixing Laser Cut 5 mm Acrylic in desired color with Plotter Cut Vinyl Letter as required.2 Feet by 4 Feet |
| 920 | Providing and fixing Laser Cut 5 mm Acrylic in desired color with Plotter Cut Vinyl Letter Double Side as required.4 Feet by 2 Feet |
| 921 | Providing and fixing Laser Cut Acrylic Letters with Stain less Steel sides along with Korean Led Lights, Letters will be directly fixed over the Main Facade. 20 Feet by 7 Feet |
| 922 | Providing and fixing Laser Cut Acrylic Letters with Stain less Steel sides along with Korean Led Lights, Letters will be directly fixed over the Main Facade. 6 Feet by 2 Feet |
| 923 | Providing and fixing Laser Cut 5 mm Acrylic Letters with Pasted over 5 mm Acrylic Sheet with 6 studs.4 Feet by 3 Feet |
| 924 | Providing and fixing Backlit Acrylic Box Lit with Korean Led.2 Feet by 1 Feet |
| 925 | Providing and fixing Laser Cut 5 mm Acrylic in desired color with Plotter Cut Vinyl Letter as required.2 Feet by 4 Feet fixed using SS studs |
| 926 | Providing and fixing Laser Cut 5 mm Acrylic in desired color with Plotter Cut Vinyl Letter as required.4 Feet by 4 Feet fixed using SS studs |
| 927 | Laser Cut 5 mm Acrylic in desired color with Plotter Cut Vinyl Letter as required.4 Feet by 4 Feet fixed using SS studs |
| 928 | 3 mm Acrylic with Desired Color with Plotter Cut Vinyl Letters.6 Inch by 3 Inch |
| 929 | LAUNDRY EQUIPMENTS |
| 930 | Distribution trolley designed for distribution of finished linen from laundry to hospital wards etc. the bumpers would be provided for protecting the trolley. The base would be fixedwith four nos. castors the doors would be designed to fold back against each end the door would be provided with locks for security. |
| 931 | Storage rack with stainless steel five perforated shelves, overall size: 1600X535X1830mm |
| 932 | Scrub Station with Two Sinks, Size: 1500X650X900mm |
| 933 | Mobile Trolley, 1080X530X800mm |
| 934 | MINOR OPERATION THEATRE |
| 935 | Supply & laying of water based aseptic & self sterilizing wall coating with Anti fungal & Anti Bacterial Paint and other related painting components (viz: Primer, Putti etc.) of approved make and shadesso as to present a joint less finish etc. as per tech. specs.attached. |
| 936 | Supplying and laying of 2mm thick washable anti static seamless flooring with perfectly curved flash coving, resistant to mechanical stresses & dynamic loads & having ESD / EMI (conductive) protection characteristics. (Approx.), Coved Corners of approved make & shade. The joints of PVC tiles should be welded by special PVC thermal welding units using PVC welding bars colours. It should be scratch proof. The PVC flooring should be inert to body fluids, chemicals and disinfectants and should not be affected by temperature variation in the OT. The floor should efficiently discharge electric charges up to 2 kV. The conductive copper grid laid underneath the PVC sheet should be supported by liquid epoxy compounds allowed to set as a uniform and level surface& as per technical specs attached.Conductive Seamless Flooring with Coving on all Corners |
| 937 | Hermetically Sealed Manual Sliding Door System Fabrication, Supply, installation, testing & commissioning of sliding type Hermetically Sealed OT door having high density particle board cores, high pressure laminate face on both sides, viewing window 300 x 300mm. Size: 1500 x 2100 mm (W x H). Door (1500 mm x 2100 mm) |
| 938 | Supply, installation, testing & commissioning of Recess Mounted IP54 LED clean room protocol, non–hygroscopic peripheral lights having CRCA housing lumen pack of 5600Lm with system wattage of 60 watt. The fitting should be Bottom opening type with high reflected clear acrylic glass with dimmer control from the Surgeon Control Panel. Specially designed for Clean Room Applications, such asModular OT & as per tech. specs attached. |
| 939 | Providing & fixing of single arm (900mm) anaesthesia pendant with load carrying capacity of 80Kg and rotational values of 330-340 degree with adjustable stopper. The pendent should be designed with service head to host, base, gas module, electric modular and shelves upto 8 gas outlets & 10 Electrical switches. Racks & Shelves should be provided to mount the equipments like monitor etc. The surgeon pendent should have two arms as per technical specsattached. |
| 940 | MGPS Piping Work with in the theatre |
| 941 | Supply Installation, Testing & Commissioning OF 1‐ Bay Scrub Sink, with Infrared Photo sensor, Digital Timer with user defined Time interval 1 & 3 minutes,1 no. mixture valve and 1 nos. solenoid valves along with Manual Option Foot Operated mechanism/ Foot switch. Anti‐splash metal body construction made of Stainless Steel Grade 304 polished finished.The Scrub Sink is provided with front access panel for ease of maintenance and repairs. 1 – Position size 800 mm long |
| 942 | Supply & instalaltion of Storage Unit size 1666 x 865 x350mm having two shelves, made 1.5 mm thick EGP with 120 microns. With Antifungal and Antibacterial surface coating. Having 5 mm thick acrylic sheet & mounted flush with the theater wall. |
| 943 | CSSD WORK |
| 944 | Supply, Installation, Testing & Commissioning of Horizontal Rectangular High Pressure High Vacuum Steam Sterilizer with 1 No. S.S. Carriage & 2 Nos. S.S. Trolley (432 Lts) |
| 945 | Supply, Installation, Testing & Commissioning ofHorizontal Cylindrical High Pressure High Vacuum Steam Sterilizer.(227 Lts) |
| 946 | Supply, Installation, Testing & Commissioning of High Pressure High Speed Horizontal Cylindrical Steam Sterilizer (Flash Autoclave)19 Lts |
| 947 | Supply, Installation, Testing & Commissioning of Stainless Steel Work Table with Double Sink. |
| 948 | Supply, Installation, Testing & Commissioning of Spray Gun Rinser with Eight Attachments |
| 949 | Supply, Installation, Testing & Commissioning of Ultrasonic Cleaner(30 Lts) |
| 950 | Supply, Installation, Testing & Commissioning of Washer Disinfector with Inbuilt Drier, Double Door(250 Lts) |
| 951 | Supply, Installation, Testing & Commissioning of Stainless Steel Control & Packing Table |
| 952 | Supply, Installation, Testing & Commissioning of Gauge Cutting Machine on SS Table |
| 953 | Supply, Installation, Testing & Commissioning of Continuous band sealer machine on SS Table |
| 954 | Supply, Installation, Testing & Commissioning of SS Pass Box |
| 955 | Supply, Installation, Testing & Commissioning of Stainless Steel Trolley with Two Shelves |
| 956 | Supply, Installation, Testing & Commissioning of Stainless Steel Storage Racks with Five Shelves. |
| 957 | Supply, Installation, Testing & Commissioning of Ethylene Oxide Sterilizer , Fully Automatic(135 Lts) |
| 958 | Supply, Installation, Testing & Commissioning of S.S Linen Inspection Table |
| 959 | ART WORK |
| 960 | Hand painting directly on wall Concept Creation Creating design and creation of Art work concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions, display of actual size dummy /mock up Fabricated in sun board with digital print for client approval.ARWORK EXECUTION Towards the cost doing hand painting using artist quality colors by qualified artists and protected by pu coating (mrf/akzonobel) all under the watchful eyes of expert artist |
| 961 | Add GST 18 % |
| 962 | Add Labour cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender