Tender For Development Of Botanical Garden, Ganga Barrage, Kanpur.
Tender Value
25.95 Crore
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
51.92 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Botanical Garden, Ganga Barrage, Kanpur.
BOQ
| Sl. No. | Item Description |
| 1 | GANGA BARRAGE WATER BODY |
| 2 | Clearing jungle including uprooting of rank vegetation ,grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 3 | Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead |
| 5 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 6 | Extra Lead & Lift |
| 7 | Disposal of Earth including Lead & lift, Loading & unloading (Distance upto 8KM. etc all complete of direction of engineer in charge. |
| 8 | RAILING FOR WATERBODY |
| 9 | Providing and Laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pilars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks. |
| 10 | Reinforcement for RCC work including straightening, cutting, bending, placing in position complete- Thermo-Mechanically Treated bars. |
| 11 | 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. Red sand stone |
| 12 | Mild steel or iron work of heavey sizes such as trusses, builtup gates, door frames, recor racks, roof work, gates etc. wrought to required from including drilling holes, revetting. or welding, where necessary and also including supply of steel, bolts, nuts, etc. & their fixing reqiured for proper completion of the work. |
| 13 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Painting Steel work with Deluxe Multi Surface Paint to give aneven shade. Two or more coat applied @ 0.90 ltr/10 sqm overan under coat of primer applied @ 0.80 ltr/10 sqm of approvedbrand and manufacture |
| 14 | Providing and Laying Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete in all respect. |
| 15 | LANDSCAPE WORK |
| 16 | Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 17 | Providing and stacking of Plant (As per Architect approval) height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.( Big Tree) |
| 18 | Providing and stacking of Plant (As per Architect approval) height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge..( MediumTree) |
| 19 | Providing and stacking of Ficus reginald well branched, bushy of height 60- 75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 20 | Providing and stacking of Ficus blackii (F.vivion) (bushy) of height 150-165 cm. with 8-10 branches and healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge |
| 21 | Providing and stacking of Euphorbia pulcherrima (dark red double bracts)well branched of height 60-75 cm. in earthen pots of size 25 cm as perdirection of the officer-in-charge. |
| 22 | Providing and stacking of Hamelia patens of height 90-105 cm. bushy in big size HDPE bags as per direction of the officer-in-charge |
| 23 | Providing and displaying of Aglaonema Butterfly having ht.30 cm 10 to 12fresh, healthy and attractive colorful leaves, well developed in 25 cm sizeEarthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 24 | Providing and Displaying of Aglaonema Sam plant ht.30 cm well developedthree in one, having 18 to 20 fresh, healthy and attractive colorful leaves in35 cm size Earthen pot/Chali/Tray & as per direction of the officer-in-charge |
| 25 | Providing and displaying of Aglaonema Silver Queen having 30 cm to 45cm. ht. with 12 to 15 leaves, multi suckers, fresh and healthy leaves, welldeveloped in 25 cm dia Earthen pot/Plastic pot & as per direction of theofficer-in-charge |
| 26 | Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring,Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, PeruvianaOdissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge |
| 27 | Providing and stacking of Clerodendrum thomsoniae of height 30 cm.to 45 cm in 20 cm size of poly bag & as per direction of the officer-in-charge. |
| 28 | Providing and stacking of Petra volubilis of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge |
| 29 | Providing and stacking of winter seasonal seedling/cutting at site of workwell developed and healthy free from disease in per tray and each trayhaving 100 Nos plants as per direction of the officer-in-charge. |
| 30 | Antirrhinum dwarf |
| 31 | Carnation (double) Dutch |
| 32 | Carnation (double) Lilliput |
| 33 | Gerbera hybrid double |
| 34 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. |
| 35 | Celosia argentea & Celosia crostata Hybrid |
| 36 | Cosmos hybrid |
| 37 | Gaillardia Double |
| 38 | Providing and stacking of Plant (As per Architect approval) height 15 cm to 20 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.(Seasonal Trees). |
| 39 | Providing and stacking of Plant (As per Architect approval), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. (Shrubs) |
| 40 | Providing and stacking of Wedelia trilobata, full of leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 41 | Providing and Displaying Carissa carandas (Karonda) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 42 | Providing and Displaying ELEPHANT EAR PLANT (Colocasia) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 43 | Providing and Displaying Lawsonia Inermis (Henna Tree) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 44 | Providing and Displaying Manokamini (Murraya Panculata) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 45 | Providing and Displaying Wild Grass as per direction of the officer-in-charge. |
| 46 | Providing and Displaying GOLDEN BAMBOO (Phyllostachys aurea) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 47 | Providing and Displaying Chrysopogon zizanioides (Vetiver GRASS) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 48 | Providing and Displaying Canna Lily 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 49 | Providing and Displaying Pretty Bearded Iris 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 50 | Providing and Displaying Nepenthes Lady Luck 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 51 | Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 52 | Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, PeruvianaOdissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 53 | Providing and Displaying Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having 75 to 90 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge. |
| 54 | Providing and stacking of Michelia champa (Golden Champa) of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 55 | Providing and stacking of Ziziphus mauritianaIndian jujube (BER) of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 56 | Providing and stacking of Citrus limon LEMON TREE of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 57 | Providing and stacking of Morus alba SHAHTOOT of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 58 | Providing and stacking of Eugenia jambolana (Jamun) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 59 | Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 60 | Providing and stacking of Ficus Racemosa (Goolar) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge. |
| 61 | Providing and stacking of Ficus religiosa (Peepal) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge. |
| 62 | Providing and stacking of Ficus Virens (Paakad) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge. |
| 63 | Providing and stacking of Ficus bengalensis (Bargad) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 64 | Providing and stacking of Putranjiva roxburghii of height 90-105 cm. in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 65 | Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications. |
| 66 | Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment). |
| 67 | Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment) |
| 68 | Mixing earth and manure in specified proportion or as directed. |
| 69 | Rough dressing the trenched ground including breaking the clods. |
| 70 | Fine dressing the ground |
| 71 | Spreading of mixed good earth and manure in specified proportions as above and in required thickness. |
| 72 | Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation. |
| 73 | Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge |
| 74 | Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. |
| 75 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. |
| 76 | Horticulture Work |
| 77 | Flowering Trees |
| 78 | Providing and stacking of Acacia auriculiformis of ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. |
| 79 | Providing and stacking of Anthocephalus cadamba of height 20-30 cm. with multi branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 80 | Providing and stacking of Barringtonia acutangula of height 20-30 cm. with multi branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 81 | Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 82 | Providing and stacking of Bombax ceiba of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 83 | Providing and stacking of Callistemon lanceolatus of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge |
| 84 | Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 85 | Providing and stacking of Cassia javanica of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge |
| 86 | Providing and stacking of Cassia siamea of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 87 | Providing and stacking of Chorisia speciosa of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 88 | Providing and stacking of Crataeva religiosa of height 20-30 cm. with multi branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 89 | Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.v |
| 90 | Providing and stacking of Erythrina indica of height 150-165 cm. in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 91 | Providing and stacking of Grevillea robusta (Silver Oak) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 92 | Providing and stacking of Jacaranda mimosifolia of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 93 | Providing and stacking of Koelreuteria apiculata of height 20-30 cm. with multi branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 94 | Providing and stacking of Lagerstroemia thorelli of height 150-165 cm.in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 95 | Providing and stacking of Millettia ovalifolia of height 20-30 cm. with multi branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 96 | Providing and stacking of Parkinsonia aculeota of height 20-30 cm. with multi branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 97 | Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 98 | Providing and stacking of Saraca asoca of height 20-30 cm. with multi branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 99 | Providing and stacking of Spathodea campanulata of height 20-30 cm. with multi branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 100 | Providing and stacking of Tecoma argentia of height 20-30 cm. with multi branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 101 | Providing and stacking of Tecomella undulata of height 20-30 cm. with multi branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 102 | Providing and stacking of Terminalia myriocarpa of height 20-30 cm. with multi branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 103 | Providing and stacking of Thespesia populnea of height 20-30 cm. with multi branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 104 | Providing and stacking of Caryota urens of height 20-30 cm. with multi branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 105 | Evergreen Trees |
| 106 | Providing and stacking of Acrocarpus fraxinifolius of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. |
| 107 | Providing and stacking of Adina cordifolia of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. |
| 108 | Providing and stacking of Albizzia lebbek of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. |
| 109 | Providing and stacking of Alstonia scholaris of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. |
| 110 | Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 111 | Providing and stacking of Bischofia javanica of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 112 | Providing and stacking of Cedrela toona of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 113 | Providing and stacking of Chukrasia tabularis of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 114 | Providing and stacking of Diospyros embryopteris of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 115 | Providing and stacking of Enterolobium timbouva of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 116 | Providing and stacking of Eucalyptus citriodora of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 117 | Providing and stacking of Eugenia cuspidata of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 118 | Providing and stacking of Ficus bengalensis (Bargad) of height 120-135 cm. in big poly bagsof size 25 cm as per direction of the officer-in-charge. |
| 119 | Providing and stacking of Ficus benjamina (green) of height 120-135 cm. with 6-8 branchesand lush green foliage in gunny bags of size 25 cm as per direction of the officer-in-charge. |
| 120 | Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge. |
| 121 | Providing and stacking of Ficus religiosa (Peepal) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge. |
| 122 | Providing and stacking of Heterophragma adenophyllum (Marore fali) of height 150-165 cm. in Big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 123 | Providing and stacking of Kigelia pinnata of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge |
| 124 | Providing and stacking of Magnolia grandiflora of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.v |
| 125 | Providing and stacking of Mangifera indica (Mango-grafted ) of height 60-75 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 126 | Providing and stacking of Millingtonia hortensis of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.v |
| 127 | Providing and stacking of Mimusops elengi (Maulsri) of height 180-195cm., well developed with thick stem in big in big size HDPE bag as per direction of the officer-in-charge. |
| 128 | Providing and stacking of Polyalthia longifolia (Ashok) of height 150-165 cm. in earthen potsof size 25 cm as per direction of the officer-in-charge. |
| 129 | Providing and stacking of Pongamia glabra (Papri) of height 120-135 cm. in big poly bag ofsize 25 cm as per direction of the officer-in-charge. |
| 130 | Providing and stacking of Pterosermum acerifolium of height 120-135 cm. in big poly bag ofsize 25 cm as per direction of the officer-in-charge. |
| 131 | Providing and stacking of Putranjiva roxburghii of height 90-105 cm. in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 132 | Providing and stacking of Sapium sebiferum of height 90-105 cm. in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 133 | Providing and stacking of Schleichera trijuga (Kusum) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge |
| 134 | Providing and stacking of Sterculia alata of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge |
| 135 | Providing and stacking of Swietenia mahagoni of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge |
| 136 | Providing and stacking of Tamarindus indica (Imli) of height 120-150 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. |
| 137 | Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. |
| 138 | Providing and stacking of Terminalia bellirica of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. |
| 139 | Providing and stacking of Ziziphus mauritianaIndian jujube (BER) of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 140 | Providing and stacking of Morus alba (SHAHTOOT) of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 141 | Providing and stacking of Acacia arabica of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 142 | Providing and stacking of Tamarix orientalis of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 143 | Providing and stacking of Dalbergia sissoo (Seasam) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 144 | Providing and stacking of Butea frondosa (Flame of Forest) of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 145 | Providing and stacking of Aegle marmelos of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 146 | Providing and stacking of Salix babylonica of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 147 | Providing and stacking of Cithraxylon subseratum of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 148 | BUTTERFLY PARK |
| 149 | Providing and displaying of Araucaria cookie having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 20 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge. |
| 150 | Providing and displaying of Araucaria cookie having ht. 75 cm to 90 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 151 | Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 152 | Providing and displaying of Croton baby golden variety having ht.30 cm and above, well developed with full of fresh and healthy leaves in 20 cm size ofEarthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 153 | Providing and displaying of Croton Petra Bangalore (Specimen ) variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh &healthy foliage approximately 60-65 leaves in 30 cm size of Earthen pot/ Plastic pot & as per direction of the officer-in-charge. |
| 154 | Providing and displaying of Dieffenbachia Mosaic having ht. 30cm to 45 cmwith 10-12 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge. |
| 155 | Providing and displaying of Dracaena Song of India (three in one), having ht. 30 cm and above, multibranched,well developed with fresh and healthy leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 156 | Providing and displaying of Dracaena warneckii having ht. 30 cm to 45 cm. with good colour foliage, well developed, fresh and healthy in 20 cm size ofEarthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 157 | Providing and displaying of Livistona palm having ht. 60 cm to 75 cm, well developed with 8 to 10 leaves, fresh & healthy foliage in 30 cm size of Earthen pot/Plastic pot. as per direction of the officer-in-charge. |
| 158 | Providing and displaying of Money Broad Leaves mounted on moss stick 90 cm ht., 3 to 4 s in each pot, well developed with full of fresh & healthyleaves in size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Perpendicular height Earthen pot/Plastic pot. & as per direction of the officer-in-charge. |
| 159 | Providing and displaying of Philodendron emerald red colour mounted on moss stick 90 cm ht., having 3 s placed at equal distance, well developed with full of fresh & healthy leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 160 | Providing and displaying of Phoenix palm having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size ofEarthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 161 | Providing and displaying of Raphis palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves frombottom to top in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge.. |
| 162 | Providing and displaying of Schefflera Varieged, mounted on moss stick 90 cm ht., 3 to 4 s placed in each pot at equal distance, well developedwith full of fresh & healthy bright leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 163 | Providing and Displaying of Spathiphyllum (peace lily), having 15 cm to 25 cm ht. blooming stag with fresh & healthy foliage well developed in 15 cmof Earthen pot/plastic pot as per direction of officer-in-charge. |
| 164 | Providing and Displaying Antirrhinum Hybrid dwarf variety, specimen (8-10) with fresh & healthy foliage in full bloom well developed in 35 cm EarthenTray/Challi Pot and as per direction of the officer-in-charge. |
| 165 | Providing and Displaying Cyclamen hybrid variety specimen 5-6 in a pot, fresh & healthy in full bloom well developed in 35 cm Earthen Tray/ Nand.as per direction of the officer-in-charge. |
| 166 | Providing and Displaying Marigold jaffri orange/yellow/Russet colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloomspecimen plant 60 to 75 cm ht in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 167 | Providing and Displaying Pansy Hybrid Sakata in different colour specimen 6-8 in a pot with fresh & healthy foliage in full bloom well developed in35 cm Earthen Tray/ Nand as per direction of the officer-in-charge. |
| 168 | Providing and Displaying Poinsettia dwarf multi head, having upto 30 cm ht., with 3 to 4 branches with fully different colored top with fresh & healthyfoliage well developed in 20 cm Earthen Pot/Plastic Pot and as per directionof the officer-in-charge. |
| 169 | Providing and Displaying Star of Bethlehem (Chinchi - Rinchi), 5 to 6 plant in each Pot full bloom, with fresh and healthy foliage flower in 25 cm EarthenPot/Plastic Pot and as per direction of the officer-in-charge. |
| 170 | Providing and Displaying Portulaca hybrid in different colour with bloom well developed fresh & healthy in 20 cm Earthen Pot/Plastic Pot and asper direction of the officer-in-charge. |
| 171 | Providing and Displaying Sunflower hybrid well developed 15 to 20 cm ht. with fresh & healthy foliage at blooming stage in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 172 | Providing and Displaying Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. |
| 173 | Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 Earthen Pot, as per direction of the officer-in-charge. |
| 174 | Providing and Displaying Bamboo Buddha vally variety with umbrella shape having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cmCement pot multy branch, bushy as per direction of the officer-in-charge. |
| 175 | Providing and Displaying Bamboo Buddha Valley with fresh & healthy 5 to 6 suckers 1.80 m to 2.10m ht umbrella type well developed in 50 cmCement Pot as per direction of the officer-in-charge. |
| 176 | Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in-charge. . |
| 177 | Providing and Displaying Cycus cirsnallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction ofthe officer-in-charge. |
| 178 | Providing and Displaying Cycus revoluta in 35 cm challi, specimen , having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfranceof base stem well developed as per direction of the officer-in-charge. |
| 179 | Providing and Displaying Cycus revoluta specimen , having 45 to 50 fresh and healthy, leaves having 30cm to 35cm circumfrance of base stem welldeveloped in 40 cm challi, as per direction of the officer-in-charge. |
| 180 | Providing and Displaying Ficus black vivion piller topiary (sylinder type) well developed with fresh & healthy 180 to 210 cm ht in 40 cm Cement Potas per direction of the officer-in-charge. |
| 181 | Providing and Displaying Ficus Nuda topiary well developed with fresh & healthy 5 to 6 big ball specific size and shape 180to 210cm ht in 40 cmCement Pot as per direction of the officer-in-charge. |
| 182 | Providing and Displaying Ficus Retusa topiary well developed with fresh & healthy 5 to 6 big ball specific size and shape 180 to 210cm ht in 40 cmCement Pot as per direction of the officer-in-charge. |
| 183 | Providing and Displaying Ficus reginold piller type Topiary well developed with fresh & healthy 210 to 240 cm ht in 40 cm Cement Pot as per directionof the officer-in-charge. |
| 184 | Providing and Displaying Ficus reginold Topiary well developed with fresh & healthy 6 to 7 big ball specific size 210 to 240 cm ht in 45 cm CementPot as per direction of the officer-in-charge. |
| 185 | Providing and Displaying Foxtail palm well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. |
| 186 | Providing and Displaying Latania Rubra Palm well developed with fresh & healthy foliage 150 to 180 cm ht. with 6 to 7 leaves in big 35 cm CementPot as per direction of the officer-in-charge. |
| 187 | Providing and Displaying Mascarena palm well developed with fresh & healthy foliage leaves 150 to 180 cm ht in 35 cm Cement Pot as per direction of the officer-in-charge. |
| 188 | Providing and stacking of Euphorbia milli hybrid variety, having ht. 30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 30 cm sizeof Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.. |
| 189 | Providing and stacking of Adansonia digitata (kalp vricksh) of ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. |
| 190 | Providing and stacking of Albizzia lebbek of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. |
| 191 | Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 192 | Providing and stacking of Bottle palm of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of theofficer-in-charge. |
| 193 | Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50cm well developed in big HDPE bags as per diection of the officer-in-charge. |
| 194 | Providing and stacking of Dalbergia sissoo (Seasam) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 195 | Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge. |
| 196 | Providing and stacking of Ficus bengalensis krishna of height 75-90 cm., multibranched in earthen pots of size 30 cm as per direction of theofficer-in-charge |
| 197 | Providing and stacking of Ficus nuda of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge. |
| 198 | Providing and stacking of Fishtail palm of ht. 150-180 cm bottom girth 15- 20 cm well developed in big poly bags of size 25 cm as per direction of theofficer-in-charge. |
| 199 | Providing and stacking of Fishtail palm of ht. 270-300 cm bottom girth 40- 50 cm well developed in big size HDPE bags as per direction of theofficer-in-charge. |
| 200 | Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35- 40 cm well developed in big size HDPE bags as per direction of theofficer-in-charge. |
| 201 | Providing and stacking of Magnolia grandiflora of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.v |
| 202 | Providing and stacking of Mimusops elengi (Maulsri) of height 180-195cm., well developed with thick stem in big in big size HDPE bag as per direction of the officer-in-charge. |
| 203 | Providing and stacking of Phoenix sylvestris Roxb. (Wild date palm/khajur) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge. |
| 204 | Providing and stacking of Plumeria acutifolia of height 120-135 cm. with 2- 3 branches in HDPE bag of size 30 cm as per direction of the officer-in-charge. |
| 205 | Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 206 | Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 207 | Providing and stacking of Polyalthia pendula (Ashok Pendula) of height 180-195 cm. in gunny bag of size 30 cm as per direction of the officer-in-charge. |
| 208 | Providing and stacking of Saraca indica (Sita Ashok) of height 105-120 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 209 | Providing and stacking of Eugenia jambolana (Jamun) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 210 | Providing and stacking of Tabebuia sp. of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. |
| 211 | Providing and stacking of Tamarindus indica (Imli) of height 120-150 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. |
| 212 | Providing and stacking of Tecoma argentea of height 120-135 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 213 | Providing and stacking of Tectona grandis (Teak) of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. |
| 214 | Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. |
| 215 | Providing and stacking of Washingtonia filifea palm stem ht. 90-105 cm with 6-7 healthy leaves lush green leaves well developed in big size HDPE Bags as per direction of the officer-in-charge. |
| 216 | Providing and stacking of Washingtonia filifea palm stem ht. 120-135 cm with 8-10 healthy leaves lush green leaves well developed in big size HDPEBags as per direction of the officer-in-charge. |
| 217 | Providing and stacking of Allamanda cathartica of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 218 | Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi,Paratha,Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 219 | Providing and stacking of Clerodendrum thomsoniae of height 30 cm.to 45 cm in 20 cm size of poly bag & as per direction of the officer-in-charge. |
| 220 | Providing and stacking of Jasmine humile (Yellow) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 221 | Fragrance Garden |
| 222 | Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branchin earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per directionof the officer-in-charge. |
| 223 | Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht.well developed with 8 or more flowers / flower buds in 20 cm Earthen pot /Plastic pot as per direction of the officer-in-charge. |
| 224 | Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch30 cm and above ht. well developed with one and above flower plant in20 cm Earthen Pot, as per direction of the officer-in-charge |
| 225 | Providing and Displaying Creeper Rose variety 3 to 4 healthy branch 60 cmand above ht. well developed with one and above flowers in 25 cm EarthenPot, as per direction of the officer-in-charge |
| 226 | Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy branch90 cm and above ht. well developed with one and above flowers in 25 cmEarthen Pot, as per direction of the officer-in-charge |
| 227 | Providing and stacking of Plumeria acutifolia of height 150-165 cm. with 3-4 branches in big size HDPE bag as per direction of the officer-in-charge. |
| 228 | Providing and stacking of Plumeria alba of height 120-135 cm. with 2-3branches in bags of size 30 cm as per direction of the officer-in-charge. |
| 229 | Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4branches and thick stem in big size HDPE bags as per direction of theofficer-in-charge. |
| 230 | Providing and stacking of Washingtonia filifea palm stem ht. 120-135 cmwith 8-10 healthy leaves lush green leaves well developed in big size HDPEBags as per direction of the officer-in-charge |
| 231 | Providing and stacking of Cestrum nocturnum (Raat ki Rani) of height 60- 75 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge |
| 232 | Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105cm in Earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 233 | Providing and stacking of Tabernaemontana coronaria (Chandni single) ofheight 45-60 cm. in earthen pots of size 20 cm as per direction of theofficer-in-charge. |
| 234 | Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 235 | Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring,Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, PeruvianaOdissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plasticpots & as per direction of the officer-in-charge |
| 236 | Providing and stacking of Ipomoea purpurea (Morning glory) of height30cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per directionof the officer-in-charge. |
| 237 | Providing and stacking of Tecoma argentea of height 120-135 cm. in bigpoly bag of size 25 cm as per direction of the officer-in-charge. |
| 238 | Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed12 and above good color fresh and healthy leaves in 40 cm Cement Pot asper direction of the officer-in-charge. |
| 239 | Providing and stacking of Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPEbag as per direction of the officer-in-charge. |
| 240 | Providing and stacking of Tecoma grandiflora of height 30 cm to 45 cm. in20 cm size of Earthen pots / Plastic pots & as per direction of theofficer-in-charge. |
| 241 | Providing and stacking of Hymenocallis littoralis of height 30 cm to 45 cm. in20 cm size of Earthen pots / Plastic pots & as per direction of theofficer-in-charge. |
| 242 | Providing and stacking of Costus speciosus of height 30 cm to 45 cm. in20 cm size of Earthen pots / Plastic pots & as per direction of theofficer-in-charge. |
| 243 | Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 244 | Providing and stacking of Sweet alyssume of ht. 20 cm to 30 cm multi branched in 15cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 245 | Providing and stacking of Murraya Paniculata of ht. 20 cm to 30 cm multi branched in 15cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 246 | Providing and stacking of Cestrum nocturnum (Raat ki Rani) of height 60- 75 cm. with 4-5 branches in bag of size 25 cm as per direction of theofficer-in-charge. |
| 247 | Providing and stacking of Ixora Yellow of ht. 20 cm to 30 cm multi branched in 15cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 248 | Providing and stacking of Hamelia patens of height 90-105 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 249 | Providing and stacking of Lavandula Angustifolia of height 90-105 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 250 | Providing and stacking of Lavandula Angustifolia of height 60-90 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 251 | Providing and stacking of Tabernamontana Coronaria of height 90-105 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 252 | Providing and stacking of Jasminum Pubescence of height 30-40 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 253 | Providing and stacking of Allmonda Nerifolia of height 30-40 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 254 | Providing and stacking of Cycas revoluta of height 30-40 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 255 | Providing and stacking of Furcarisa Silver of height 30-40 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 256 | Providing and stacking of Damask Rose of height 30-40 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 257 | Providing and stacking of Floribunda Rose of height 30-40 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 258 | Providing and stacking of Grandiflora Rose of height 30-40 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 259 | Providing and stacking of Bourbon Rose of height 30-40 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 260 | Providing and stacking of Hybrid Rose of height 30-40 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 261 | Providing and stacking of Golden Duranta of height 30-40 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 262 | Providing and stacking of Iresine of height 30-40 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 263 | Providing and stacking of Murraya Exotica of height 30-40 cm. bushy inbig size HDPE bags as per direction of the officer-in-charge. |
| 264 | HERBAL GARDEN |
| 265 | Providing and Stacking of Anjeer of height 75-90 cm. in poly bags of size 25 cm as perdirection of the officer-in-charge. |
| 266 | Providing and Stacking of Curry leaf of height 75-90 cm in poly bag ofsize 25 cm as perdirection of the officer-in-charge. |
| 267 | Providing and Stacking of Ashwagandha of ht. 30 cm with multi branchesin Poly bag of size 20 cm.as per direction of the officer-in-charge. |
| 268 | Providing and Stacking of Satavari, well developed in earthen pot of size20 cm as per direction of theofficer-in-charge |
| 269 | Providing and Stacking of Tulsi of ht. 30 cm with multi branches in Polybag of size 20 cm. as per direction of the officer-in-charge. |
| 270 | Providing and Stacking of Alovera well developed in earthen pot of size20cm as per direction of the officer-in-charge. |
| 271 | Providing and Stacking of Sarpgandha well developed in poly bag of size20 cm as per direction of theofficer-in-charge |
| 272 | Providing and Stacking of Mandukparni well developed in poly bag of size20cm as per direction of the officer-in-charge. |
| 273 | Providing and Stacking of Kapoor kachri well developed in poly bag of size20cm as per direction of the officer-in-charge. |
| 274 | Providing and Stacking of Neer Brahmi well developed in poly bag of size20 cm as per direction of the officer-in-charge |
| 275 | Providing and Stacking of Minia erecta plant of height 45-60 cm.multibranches, well developed in poly bags of size 20 cm as per directionof the officer-in-charge |
| 276 | Providing and Stacking of Justicia brandegeeana plant of height 45-60 cm.multibranches, well developed in poly bags of size 20 cm as per directionof the officer-in-charge. |
| 277 | Providing and Stacking of Ficus panda plant of height 90 -105 cm.multibranches, well developed in poly bags of size 25 cm as per directionof the officer-in-charge. |
| 278 | Providing and Stacking of Peepli well developed in poly bag of size 20cmas per direction of the officer-in-charge. |
| 279 | Providing and Stacking of Chitrak of ht. 30cm with multi branches in Polybag of size 20 cm. as per direction of the officer-in-charge |
| 280 | Endemic Plant |
| 281 | Providing and stacking of Adansonia digitata (kalp vricksh) of ht 150-165cm in bag size of 25 cm as per direction of the officer-in-charge. |
| 282 | Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50cm well developed in big HDPE bags as per direction of the officer-in-charge |
| 283 | Providing and stacking of Bottle palm of ht. 210-240 cm bottom girth 30-35cm well developed in big HDPE bags. |
| 284 | Providing and stacking of Ficus benjamina (green) of height 150-165 cm.,bushy with healthy branches and lush green foliage in big size HDPE bagsas per direction of the officer-in-charge. |
| 285 | Providing and stacking of Ficus bengalensis (Bargad) of height 120-135cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 286 | Providing and stacking of Ficus bengalensis krishna of height 75-90 cm.,multibranched in earthen pots of size 30 cm as per direction of theofficer-in-charge |
| 287 | Providing and stacking of Ficus shiela of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. |
| 288 | Providing and stacking of Fishtail palm of ht. 210-240 cm bottom girth 25-30 cm well developed in big size HDPE bags as per direction of theofficer-in-charge. |
| 289 | Providing and stacking of Magnolia grandiflora of height 150-165 cm. in bigpoly bag of size 25 cm as per direction of the officer-in-charge.v |
| 290 | Providing and stacking of Mangifera indica (Mango-grafted ) of height 60-75cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 291 | Providing and stacking of Lagerstroemia flosreginae of height 150-165 cm.inbig poly bag of size 25 cm as per direction of the officer-in-charge |
| 292 | Providing and stacking of Mimusops elengi (Maulsri) of height 180-195cm., well developed with thick stem in big in big size HDPE bag as perdirection of the officer-in-charge |
| 293 | Providing and stacking of Nauclea cadamba (Kadam) of height 150-165cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 294 | Providing and stacking of Phoenix sylvestris Roxb. (Wild date palm/khajur)of height 150-165 cm. in Big HDPE Bag as per direction of theofficer-in-charge. |
| 295 | Providing and stacking of Pinus longifolia (Pinus) of height 90-105 cm. incement pots of size 35 cm as per direction of the officer-in-charge. |
| 296 | Providing and stacking of Plumeria acutifolia of height 150-165 cm. with 3-4 branches in big size HDPE bag as per direction of the officer-in-charge. |
| 297 | Providing and stacking of Polyalthia pendula (Ashok Pendula) of height180-195 cm. in gunny bag of size 30 cm as per direction of theofficer-in-charge |
| 298 | Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4branches and thick stem in big size HDPE bags as per direction of theofficer-in-charge. |
| 299 | Providing and stacking of Plumeria alba dwarf of height 90-105 cm.with 3-4 branches and thick stem in big size HDPE bags as per directionof the officer-in-charge. |
| 300 | Providing and stacking of Tamarindus indica (Imli) of height 120-150 cm. inbig polybags of size 25 cm as per direction of the officer-in-charge. |
| 301 | Providing and stacking of Washingtonia filifea palm stem ht. 120-135 cmwith 8-10 healthy leaves lush green leaves well developed in big size HDPEBags as per direction of the officer-in-charge. |
| 302 | CACTUS GARDEN |
| 303 | Providing and stacking of Opuntia spp. of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 304 | Providing and stacking of Echinocactus grusonii of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 305 | Providing and stacking of Mammillaria spp. of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 306 | Providing and stacking of Gymnocalycium spp. of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 307 | Providing and stacking of Astrophytum myriostigma of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 308 | Providing and stacking of Ferocactus spp. of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 309 | Providing and stacking of Rebutia spp of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 310 | Providing and stacking of Epiphyllum oxypetalum. of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 311 | Providing and stacking of Schlumbergera spp. of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 312 | Providing and stacking of Hatiora spp.of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 313 | Providing and stacking of Cereus peruvianus of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 314 | Providing and stacking of Trichocereus spp.of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 315 | Providing and stacking of Stenocereus spp. of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 316 | BONSAI GARDEN |
| 317 | Providing and stacking of Ficus Bonsai of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 318 | Providing and stacking of Jade Bonsai of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 319 | Providing and stacking of Bonsai plants of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 320 | Providing and stacking of Ficus Microcarpa Bonsai of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 321 | Providing and stacking of Banyan Bonsai of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 322 | Providing and stacking of Bougainvillea Bonsai of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 323 | Providing and stacking of Peepal Bonsai of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 324 | Providing and stacking of Azadirachta indica ( Neem Bonsai) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 325 | Providing and stacking of Terminalia arjuna Bonsai of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 326 | Providing and stacking of Jasminum sambac of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 327 | Providing and stacking of Punica granatum Bonsai of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 328 | Providing and stacking of Murraya paniculata of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 329 | OPEN AMPHITHEATRE |
| 330 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.All kinds of soil |
| 331 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 332 | Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete. |
| 333 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 334 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriagefor all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth levelConcrete of M25 grade with minimum cement content of 330 kg /cum |
| 335 | Same as item above but All works above plinth level upto floor V level for Beam (Concrete of M25 grade with minimum cement content of 330 kg /cum) |
| 336 | Same as item above but All works above plinth level upto floor V level for Slab (Concrete of M25 grade with minimum cement content of 330 kg /cum) |
| 337 | Centering and shuttering including strutting, propping etc. and removalof form for Lintels, beams, plinth beams, girders, bressumers andcantilevers with water proof ply 12 mm thick |
| 338 | Centering and shuttering including strutting, propping etc. and removalof form for Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc. |
| 339 | Centering and shuttering including strutting, propping etc. and removalof form for Suspended floors, roofs, landings, balconies and accessplatform with water proof ply 12 mm thick |
| 340 | Centering and shuttering including strutting, propping etc. and removalof form for Foundations, footings, bases of columns, etc. for massconcrete |
| 341 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 342 | First Class M-150 brick work in 1:6 cement and coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. |
| 343 | M-150 brick work in 1:6 cement and Coarse sand mortar in superstructure including supply of all material, labour and tools and plants etc required for proper completion of work for walls of 230 mm thick |
| 344 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 345 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. |
| 346 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 347 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm |
| 348 | Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. |
| 349 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 350 | 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. Red sand stone |
| 351 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 352 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 353 | Drip irrigation |
| 354 | Providing & fixing of 75 mm 4 kg Pvc Pipe |
| 355 | Providing & fixing of 32 mm LLDPE Pipe |
| 356 | Providing & fixing of Mini Sprinkler |
| 357 | Providing & fixing of SCEREEN Filter |
| 358 | Providing & fixing of Ventury assembly |
| 359 | Providing & fixing of Bypass Assembly |
| 360 | Providing & fixing of Control Valve 75mm |
| 361 | Providing & fixing of Flush Valve 75mm |
| 362 | Providing & fixing of Assesries |
| 363 | EXTERIOR GRADE, VITRIFIED TILE PATHWAY |
| 364 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.All kinds of soil |
| 365 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 366 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 367 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. |
| 368 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 369 | Providing and laying matt finished vitrified tile of size 100x100x16mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge. |
| 370 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern |
| 371 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 372 | First Class M-150 brick work in 1:6 cement and coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. |
| 373 | KATCHCHA PATHWAY |
| 374 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.All kinds of soil |
| 375 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 376 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 377 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. |
| 378 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 379 | Making bajri path including preparation of subgrade, supplying and laying brick aggregate of 50 mm nominal size 7.5 cm deep with blinding material consisting of 12 mm moorum and 12 mm red bajri consolidated with road roller. |
| 380 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 381 | First Class M-150 brick work in 1:6 cement and coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. |
| 382 | GRASS PAVERS |
| 383 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.All kinds of soil |
| 384 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 385 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 386 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 387 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. |
| 388 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 389 | Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal sizestone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. |
| 390 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 391 | First Class M-150 brick work in 1:6 cement and coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. |
| 392 | BRICK SOLVING PAVING |
| 393 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.All kinds of soil |
| 394 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 395 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 396 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. |
| 397 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 398 | Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 399 | First Class M-150 brick work in 1:6 cement and coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. |
| 400 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil |
| 401 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 402 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 403 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made bytable vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. |
| 404 | Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal sizestone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. |
| 405 | Providing and laying matt finished vitrified tile of size 100x100x16mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed withmatching pigments etc. complete as direction of Engineer-in-Charge. |
| 406 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and asdirected by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, EliteBrown, Cat Eye or equivalent. |
| 407 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and asdirected by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/RubyRed or equivalent |
| 408 | Providing & fixing of Quartz Cobble Stone Paving Size 100x100x 100 mm including filling of mortar in joints & 40 mm thick base including all necessary T&P all complete in direction of engineer in charge. |
| 409 | 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. Red sand stone |
| 410 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern |
| 411 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approvedby Engineer-in-charge). |
| 412 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 8km also including ramming and watering of the earth in layers in trenches, plinth, sides of foundation etc. complete. |
| 413 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 414 | Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineerin-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Cement concrete prepared with batch mixing machine |
| 415 | Mild steel or iron in plain work such as reinforced concrete or reinforced ,brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 416 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 417 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 418 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 419 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 420 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 421 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 422 | Providing and fixing 2nd class teak wood plain lining tongued and grooved,including wooden plugs complete with necessary screws and primingcoat on unexposed surface.40mm thick |
| 423 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 424 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4Coarse sand : 8 Stone aggregate 40 mm nominal size) |
| 425 | Supplying & Laying of Rubber pad in rolls / or paved at site in thickness 36 mm, EPDM / SBR floor (30 mm black rubber crumbs + 6 mm EPDM/SBR) with a single compound polythene binder , finished with multiple sprays of 100% solids pigment polythene and EPDM granules etc |
| 426 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) erived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 427 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 428 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 429 | Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns |
| 430 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil |
| 431 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 432 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cementcontent, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 433 | As in item3 but upto plinth Level |
| 434 | As in item 3 but Above plinth Level |
| 435 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 436 | Foundations, footings, bases of columns, etc. for mass concrete |
| 437 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 438 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 439 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 440 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 441 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars |
| 442 | Upto plinth level.Thermo-Mechanically Treated bars |
| 443 | Above plinth level |
| 444 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 445 | Finishing walls with textured exterior paint of required shade.New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 446 | Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats, square or round bars etc.all complete Fixed to steel windows by welding |
| 447 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacture's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work |
| 448 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. |
| 449 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m |
| 450 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work up to plinth level. 1:4:8 (1 Cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) |
| 451 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 452 | As in item 4 above but in R.C.C. footing ete) |
| 453 | As in item 4 above but in Column Above Plinth |
| 454 | As in item 4 but for the Heavier beams |
| 455 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 456 | Centering & Shuttering |
| 457 | Foundation & footung , bases of columns |
| 458 | Columns , pillars , piers , abutements |
| 459 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 460 | DSR 5.22.6 |
| 461 | Providing and fixing Cast iron Gate including moulding, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary Cast iron nuts and bolts complete, with suitable arrangement as per approval of Engineer-in-charge, |
| 462 | 12 mm cement plaster of mix : 1:4(1 cement: 4 coarse sand) |
| 463 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 464 | Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chasesof size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge. |
| 465 | Supplying & Laying Moulding & Carveying in sand stone by mannualil/ Machenically etc all complete of direction engineer in charge. |
| 466 | Supplying , Testing, Installation, & Commisning Lamp Post Size of lamp 280mm width & 590 mm Height cast iron made Grout in above Column & Stainless steel screw, corrosion and UV RAy resistant coating, sand blasted glass diffuser with LED light including Wire & Cable with Conduit etc all complete of direction engineer in charge. (Make -Twinklelites /Havells / Orbis/ Neri) |
| 467 | Supplying , Testing, Installation, & Commisning Consealed LED Wall Light Traditional type including Wire & Cable with Conduit etc all complete of direction engineer in charge. . (Make -Twinklelites /Havells / Orbis/ Neri) |
| 468 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 469 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 470 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.All kinds of soil |
| 471 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 472 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works Upto plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 473 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 474 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. |
| 475 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 476 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade |
| 477 | 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) |
| 478 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 479 | Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil mixed moorum, shingle, kanker(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. |
| 480 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 481 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. |
| 482 | All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 483 | All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 484 | Centering and shuttering including strutting, propping etc. and removal of form work for |
| 485 | Foundations, footings, bases of columns, etc. for mass concrete |
| 486 | :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. |
| 487 | Reinforcement for RCC work including straightening, cutting, bending, placing in position complete. - Thermo-Mechanically Treated bars. |
| 488 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 489 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 490 | Clearing jungle including uprooting of rank vegetation ,grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 491 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), includingdressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 492 | Providing and laying Cement Concrete 1 :4 : 8 (1 Cement : 4 coarse sand : 8 graded stone agg. 40 mm. nominal size) with cost of centring and shuttering in foundation and under floors including curing, supply of all materials, labour, T & P etc. required for proper completion of the work |
| 493 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 494 | Reinforcement for RCC work including straightening, cutting, bending, placing in position complete. - Thermo-Mechanically Treated bars. |
| 495 | Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided), including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete |
| 496 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 497 | Providing wood work in frames of / Railing / false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood |
| 498 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 499 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 500 | 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class teak wood |
| 501 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 502 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. Ordinary Rock |
| 503 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 504 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 505 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1cement : 6 coarse sand) |
| 506 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard settingof concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; Concrete of M25 grade with minimum cement content of 330 kg /cum All work upto plinth level |
| 507 | Reinforcement for RCC work including straightening, cutting, bending, placing in position complete. - Thermo-Mechanically Treated bars. |
| 508 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 509 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) Red sand stone - Exposed face machine cut and tablerubbed with rough backing. 40 mm thick |
| 510 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 511 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 512 | Earth work |
| 513 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Ordinary Rock |
| 514 | DSR-2.7.1 |
| 515 | Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete. |
| 516 | DSR-2.27 |
| 517 | Concrete Work |
| 518 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 519 | DSR-4.1.8 |
| 520 | Reinforced Cement Concrete |
| 521 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairingstrength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-incharge; Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 522 | DSR-5.33 |
| 523 | All works upto plinth level |
| 524 | DSR-5.33.1.1 |
| 525 | All works above plinth level upto floor V level |
| 526 | DSR-5.33.2.1 |
| 527 | Anti Termite Treatment |
| 528 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981)Alderine emulsifiableconcentrate or any other approved material such as Heptrachlor or chordance will be used.The rate of application of chemical emulsion shallbe as follows : (1)Treatment for masonary & foundation 5 liters per / 100 sqm. (2) Back fill in immediate contact with foundation 7.5 liters/100sqm (3) Treatment of top surface of plinth filling 5 liters/100 sqm (4)Treatment junction of wall and the floor 7.5 liters/100 sqm (5)Treatment of soil along external perimeter of building 7.5liters/100sqm. (6) Treatment of soil under apron along external perimter 5 liters/100 sqm |
| 529 | DSR 2.35.3.1 |
| 530 | Brick work |
| 531 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) |
| 532 | DSR-6.2.2 |
| 533 | Wood Work |
| 534 | Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : Sal wood beams |
| 535 | (DSR - 9.54.1 ) |
| 536 | Steel Work |
| 537 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 538 | DSR-5.22.6 |
| 539 | Providing and fixing Cast iron Pillar made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary iron nuts and bolts complete, i/c fixing the Column with necessary accessories & iron dash fasteners, iron bolts etc., of required size, on the top of the floor with suitable arrangements, all complete as per approved design/ Drawing and etc all complete of direction of Engineer-in-charge, (DECORATIVE COLUMN ) For Pergola |
| 540 | Providing & Fixing 50 mm Dia Strut. ( Providing and fixing bolts including nuts and washers complete) |
| 541 | (DSR 10.20) |
| 542 | Providing & Fixing Stainless Steel Rod 75mm Dia. etc all complete of direction of engineer in charge. |
| 543 | (DSR 4001 Based) |
| 544 | Plaster Work |
| 545 | 12 mm cement plaster of mix : 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. |
| 546 | 13.7.1 |
| 547 | Flooring Work |
| 548 | Supplying & laying of Exterior grade vitrified Tile flooring (600x600)mm 9.8mm thick including 20mm thick bed & filling of joint in 1:4 Cement mortar including all Labour T&P etc all complete in direction of engineer in charge . |
| 549 | Painting & Polishing Work |
| 550 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 551 | (DSR 13.48.3) |
| 552 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 553 | DSR 13.68 |
| 554 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 555 | (DSR 13.45.1) |
| 556 | Clearing jungle including uprooting of rank vegetation ,grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 557 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.All kinds of soil |
| 558 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 559 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level |
| 560 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars |
| 561 | Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided), including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete |
| 562 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 563 | Providing wood work in frames of / Railing / false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood |
| 564 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete |
| 565 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 566 | 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class teak wood |
| 567 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 568 | SITE DEVELOPMENT WORK |
| 569 | Supply, fabrication, transportation, installation of bronze sculptures complete in all respects, in accordance with approved drawings and specifications. The work shall include casting of sculptures in high-grade bronze alloy (typically Cu 85–90%, Sn 5–10%, Zn/Pb balance or as approved), using the lost-wax (cire perdue) process to achieve fine surface detailing and structural integrity. Minimum metal thickness shall not be less than 6 mm for small elements and 8–12 mm for larger load-bearing sections, unless otherwise specified. Internal armatures shall be in stainless steel (Grade 304/316) with proper anchorage and provision for thermal expansion. All joints shall be TIG/MIG welded, chased, and finished to match surrounding surfaces seamlessly. Surface finishing shall include chemical patination using stable oxides |
| 570 | Provide for the design, supply, fabrication, transportation, and erection of a of Area 19.6 Sqm and column of 2.7 Mtr including pedestal as per drawing and complete in all respect as per Architect-in-charge. The gazebo shall be constructed using structural steel/wrought iron/ timber or a combination thereof as specified. Structural members shall conform to relevant standards (e.g., IS 2062 for steel), with minimum thicknesses as per design requirements to ensure stability against wind and seismic loads. All steel components shall be shop-fabricated, properly welded (MIG/TIG/arc welding), ground smooth, and treated with anti-corrosive primer followed by two or more coats of approved paint or powder coating of minimum 60–80 microns thickness. For timber elements, seasoned hardwood (moisture content <12%) shall be used, treated with preservative chemicals and finished with exterior-grade polish or paint. |
| 571 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.All kinds of soil |
| 572 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil |
| 573 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 574 | Providing and laying Cement Concrete 1 :4 : 8 (1 Cement : 4 coarse sand : 8 graded stone agg. 40 mm. nominal size) with cost of centring and shuttering in foundation and under floors including curing, supply of all materials, labour, T & P etc. required for proper completion of the work |
| 575 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works Upto plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 576 | All works Upto plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum, As in item 4 but for the Lighter beams i.e. having spans above 6 m. (Using 1:1.5:3 Mix concrete) |
| 577 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 578 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 579 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm |
| 580 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm |
| 581 | Providing & laying Lotus Bed Preparation Placement of pond soil mix (clay + loam + manure) Supply and planting of lotus rhizomes or saplings Fertilizer and compost layer Optional: gravel bed or plant containment rings i/c HDPE geomembrane liner 1.0 mm thick |
| 582 | SITE DEVELOPMENT WORK |
| 583 | Providing & fixing of Theamatic Painting work complete in allrespects in direction of Engineer-in-Charge. |
| 584 | Providing & fixing of Mural on Wall work complete in allrespects in direction of Engineerin-Charge. |
| 585 | Providing & fixing of R.O. system with Water Cooler purification capacity of about 40–50 litres per hour. It usually includes multi-stage purification with sediment and carbon filters, an RO membrane, and often UV disinfection along with a TDS controller for safe drinking water. The cooling unit generally has an 80-litre stainless steel storage tank with a cooling capacity of around 40 litres per hour. These systems operate on a standard 220–230V power supply, consume about 500–600 watts, and use a heavy-duty compressor for efficient cooling. The body is typically made of rust-proof stainless steel (SS304), and additional features may include auto shut-off, float valve control, and overload protection.complete in all respects in direction of Engineer-in-Charge.fixing of |
| 586 | Providing & fixing of Tree Guard heavy-duty, long-life category typically include a height of around 5–6 feet with a diameter of about 450–600 mm, made from high-quality galvanized iron (GI) or mild steel with thicker sections (for example, 8–10 mm vertical bars or strong welded mesh). The structure would be fully welded with 3–4 sturdy legs or base plates for proper anchoring in the ground, ensuring resistance against wind, animal impact, and vandalism. It would also have a hot-dip galvanized or powder-coated finish complete in all respects in direction of Engineer-in-Charge. |
| 587 | Providing & fixing of Sand Stone bencch size is about 4 to 6 feet (1200–1800 mm) in length, 1.5 to 2 feet (450–600 mm) in width, and a seat height of around 16 to 18 inches (400–450 mm) from the ground, which is ergonomically suitable for sitting. The thickness of the seating slab is usually 50–75 mm, depending on the design and load requirement,complete in all respects in direction of Engineer-in-Charge |
| 588 | Providing & fixing of Wooden Bench of size size is about 4 to 6 feet (1200–1800 mm) in length, 16–18 inches (400–450 mm) seat height, and 16–20 inches (400–500 mm) seat depth, which provides comfortable seating for 2–3 people. If a backrest is included, the overall height typically ranges from 30 to 36 inches (750–900 mm) with a slight backward incline for ergonomic support complete in all respects in direction of Engineerin- Charge. |
| 589 | Providing & fixing of Cast Iron Bench coated with primer and weather-resistant paint or powder coating to prevent rust and ensure long outdoor life work complete in all respects in direction of Engineerin-Charge. |
| 590 | Providing & fixing of Dustbin work complete in all respects indirection of Engineer-in- Charge |
| 591 | Providing & fixing of Signage complete in all respects indirection of Engineerin- Charge. |
| 592 | Supplying and Fixing of Four Seater Swing with sparrow outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 593 | Supplying and Fixing of Standard Multi seater See Saw outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 594 | Supplying and Fixing of Turbo Tower outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 595 | Supplying and Fixing of Monkey Climber outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 596 | Supplying and Fixing of Balancing Bridge outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 597 | Supplying and Fixing of Four Seater Merry Go Round outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 598 | Supplying and Fixing of 7' Ht. FRP Wave Slide outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 599 | Supplying and Fixing of Frog Bin - FRP outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 600 | Supplying and Fixing of Duplex Multi Play Fun System - 06 outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 601 | Supplying and Fixing of Imperial Bench 4' outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 602 | Supplying and Fixing of Fun Walker Single excercise equipment (Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 603 | Supplying and Fixing of Abb Trainer - Roto outdoor excercise equipment (Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 604 | Supplying and Fixing of Fun Rider outdoor excercise equipment (Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 605 | Supplying and Fixing of Shoulder Press Double double outdoor excercise equipment (Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 606 | Supplying and Fixing of Chest Press Double outdoor excercise equipment (Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 607 | Supplying and Fixing of Shoulder Twirl - New outdoor excercise equipment (Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 608 | Supplying and Fixing of Leg Press Double outdoor excercise equipment (Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 609 | Supplying and Fixing of Ski Trainer outdoor excercise equipment (Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 610 | Supplying and Fixing of Leg Lift Post outdoor excercise equipment (Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 611 | Supplying and Fixing of Tai Chi outdoor excercise equipment (Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 612 | EARTH WORK |
| 613 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 8km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 614 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 615 | ANTI TERMITE WORK |
| 616 | Providing and injecting chemical emulsion for Preconstructional antitermite treatment and creating a chemical barrier under and alround the column pitswall trenches basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surroundings of pipes and conduit etc. complete(Plinth area of the building at ground floor only shall be measuredas per I.S. 6313 (Part II 1981) Aldrine emulsifiable concentrate or any other approved material such as Hepthachlor or chlordance will be used. The rateof applications of chemical emulsion shall be as Follows :- (1) Treatment for Masonary & foundatiion 5 Liters per Sq.m.(2) Back fill in immediate contract with foundation 7.5 Litres per Sq.M. (3) Treatment of Top surface of plinth filling 5 Litres per Sq.M. (4) Treatment of soil along External Perimerter of Building 7.50 Litres per Sq.M. (5) Treatment of soil under Apron Along extrnal Perimeter 5 litres per sq.M |
| 617 | P.C.C. WORK |
| 618 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stoneaggregate 40 mm nominal size) |
| 619 | R.C.C. WORK |
| 620 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 621 | All works above plinth level upto floor V level |
| 622 | Providing centering & shuttering including strutting, propping etc. & removal of form including all materials, labour and T & P etc. required for proper completion of work all complete |
| 623 | Suspended floors, roofs, landings, balconies and access platform |
| 624 | Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc |
| 625 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 626 | BRICK WORK |
| 627 | M-150 brick work in 1:4 cement and Coarse sand mortar in superstructure including supply of all material, labour and tools and plants etc required for proper completion of work for walls of 115mm (4-1/2\\") thickness. |
| 628 | FINISHING WORK |
| 629 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 630 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 631 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. |
| 632 | Wall painting with acrylic emulsion paint, having VOC (Volatile OrganicCompound ) content less than 50 grams/ litre, of approved brand andmanufacture, including applying additional coats wherever required, toachieve even shade and colour. Two coats |
| 633 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 634 | DOOR & WINDOW WORK |
| 635 | Providing wood work in frames of doors, windows, clerestory windowsand other frames, wrought framed and fixed in position with hold fastlugs or with dash fasteners of required dia & length ( hold fast lugs ordash fastener shall be paid for separately).Second class teak wood |
| 636 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 637 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 638 | Frame anchor HRD-C 10x140 |
| 639 | Frame anchor HRD-C 10x120 |
| 640 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 641 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm |
| 642 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
| 643 | (a) 250 mm x 10mm |
| 644 | (a) 200 mm x 10mm |
| 645 | Providing and fixing bright finished brass handles with screws etc. complete:125 mm |
| 646 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 647 | Providing and fixing glazed shutters for doors, windows and clerestorywindows using 5 mm thick float glass panes, including ISI marked M.S.pressed butt hinges bright finished of required size with necessaryscrews. Second class teak wood 35 mm thick |
| 648 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 649 | FLOORING WORK |
| 650 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm |
| 651 | Providing and laying Vitrified tiles in floor in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in allcolours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm includinggrouting the joints with white cement and matching pigments etc. Thetiles must be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips of requiredthickness, leveling system and rubber mallet for placing the tiles gentlyand easily Glazed vitrified floor tiles polished finish of size Size of Tile 600 x 600 mm |
| 652 | Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Medium shade pigment using 50% white cement 50% Grey cement |
| 653 | 40 mm thick rubbed stone flooring over 20 mm (average) thick base ofcement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick,side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixedwith pigment to match the shade of stone and pointing with same mortar. Red sand stone |
| 654 | MISSLENIOUS WORK |
| 655 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto10 metre height, backing filled with a grout of average 12 mm thickcement mortar 1:3 (1 cement : 3 coarse sand) including pointing inwhite cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - exposed face fine dressed with roughbacking. 30 mm thick |
| 656 | Providing and fixing stainless steel cramps of required size and shapefor anchoring stone wall lining to the backing or securing adjacent stonesin stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand),including making the necessary chases in stone and holes in wallswherever required. |
| 657 | Providing and fixing copper pins 7.5 cm long 6 mm diameter for securingadjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2coarse sand), including making the necessary chases. |
| 658 | Providing and laying integral cement based water proofing treatmentincluding preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineerin- Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
| 659 | Providing and applying integral crystalline slurry of hydrophilic innature for waterproofing treatment to the RCC structures like retainingwalls of the basement, water tanks, roof slabs, podiums, reservior,sewage & water treatment plant, tunnels / subway and bridge decketc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystallineslurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integralcrystalline slurry : 1 part water) for horizontal surfaces and applyingthe same from negative (internal) side with the help of synthetic fiberbrush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than90% compared with control concrete as per DIN 1048 and resistantto 16 bar hydrostatic pressure on negative side. The crystalline slurryshall be capable of self-healing of cracks up to a width of 0.50mm.The work shall be carried out all complete as per specification andthe direction of the engineer-in-charge. The product performance shallcarry guarantee for 10 years against any leakage.22.23.1 For vertical surface two coats @ 0.70 kg per sqm |
| 660 | Providing and applying fibre reinforced elastomeric liquid waterproofing membrane with resilient acrylic polymers having SunReflectivity Index (SRI) of 105 on top of concrete roof in three [email protected] litre/ 10 sqm. One coat of self-priming of elastomericwaterproofing liquid (dilution with water in the ratio of 3:1) and twocoats of undiluted elastomeric waterproofing liquid (dry film thicknessof complete application/system not less than 500 microns). Theoperation shall be carried out after scrapping and properly cleaningthe surface to remove loose particles with wire brushes, complete inall respect as per the direction of Engineer-in-Charge. |
| 661 | Providing and fixing red sand stone brackets 55x22.5x45 cm sunk andmoulded including providing and fixing with 4 Nos gun metal cramp25x6 mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as perdesign. |
| 662 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 663 | Applying two or more coat of Ethyl Silicate chemical as approved byArchaeological Survey of India/ Engineer-in-charge, of approved brandand manufacturer, with brush or spray on the existing stone masonrysurface till there is no further absorption of chemical by stone surface,including protecting the applied surface from direct sunlight by suitablemeans during application, all complete as per direction of theEngineer-in-Charge (The rate is inclusive of all materials & laboursinvolved except scaffolding). |
| 664 | Point wiring in PVC Conduit |
| 665 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 666 | Group C |
| 667 | Power plug wiring in PVC conduit (2 x 4 sqmm.) :- |
| 668 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVCinsulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 669 | Circuit / Sub main wiring in PVC conduit :- |
| 670 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 671 | 2 x 1.5 sq.mm. + 1 x 1.5 sq.mm. Earth wire |
| 672 | 2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire |
| 673 | 4 x 6 sq.mm. + 2 x 6 sq.mm. Earth wire |
| 674 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 675 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 676 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required |
| 677 | 20 mm. |
| 678 | 25 mm. |
| 679 | 32 mm. |
| 680 | S/F light plug point modular type accessories :- |
| 681 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required |
| 682 | S/F power plug point modular type accessories :- |
| 683 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 684 | S/F modular type electronic fan regulator :- |
| 685 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 686 | S/F modular type blanking plate :- |
| 687 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 688 | TELEPHONE, TELEVISION AND DATA NETWORK |
| 689 | TELEPHONE WIRING IN EXISTING CONDUIT :- |
| 690 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required |
| 691 | 2 Pair |
| 692 | S/F MODULAR BOXES, BASE & COVER PLATE :- |
| 693 | Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc as required |
| 694 | 1 or 2 Module (75 mm x 75 mm) |
| 695 | S/F MODULAR TYPE SWITCH / SOCKET :- |
| 696 | Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc as required |
| 697 | Telephone Socket outlet |
| 698 | DISTRIBUTION BOARDS, MCB's, MCCB's AND SFU's |
| 699 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 700 | 4 way (4 + 12), Double door, horizontal type |
| 701 | 6 way (4 + 18), Double door, horizontal type |
| 702 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 703 | single pole |
| 704 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 705 | 40 amps. |
| 706 | 63 amps. |
| 707 | Supplying & fixing single pole, blanking plate in the existing MCB DB complete etc. as required. |
| 708 | Supplying and fixing 20 A, 415 V, TPN Industrial type socketoutlet, with 4 pole and earth, metal enclosed plug topalongwith 20 A \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 709 | G.I. EARTHING |
| 710 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 711 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 712 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 713 | ERECTION OF LIGHTING FIXTURES AND FANS |
| 714 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. |
| 715 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep |
| 716 | Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT- AAA |
| 717 | Supply and fixing of 12 Watt to 15 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing with extended heat sink, diffuser of Polycarbonate meterial and driver set complete in all respect. CAT- AAA |
| 718 | Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA |
| 719 | Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA |
| 720 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos.blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperaturerise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 721 | 1200 mm sweep |
| 722 | Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete |
| 723 | 300 mm sweep 900 rpm |
| 724 | Supply, installation, testing and commissioning of Main Distribution Board suitable for upto 125 amp FP MCCB incomer and single / three phase outgoing MCB's, IP 43 protection, double metal door, factory fabricated, wall mounting type in surface / recess, powder coated, 415 V / 200 amp copper Bus Bar, earth and neutral bar, removable gland plates, cable glands including connection with outgoing feeders complete in all respect. DB's shall be original factory fabricated of approved make. The rates shall be excluding all incoming and outgoing circuit breakers. |
| 725 | 8 Way TPN |
| 726 | Providing and fixing of following rating Four pole MCCB's at the incomer of Main/sub distribution boards with connections etc. complete as required. |
| 727 | 100 Amp FP MCCB (16 KA) |
| 728 | Supplying, fixing, connecting, testing and commissioning of following rating, ISI marked (IS 8828) 240 / 415 volts, 10 KA, Miniature Circuit Breaker (MCB) of single / double / three / four poles in the existing MCB DB or in existing MS enclosure complete in all respects. |
| 729 | 25 Amp. TP MCB |
| 730 | 40 Amp. TP MCB |
| 731 | 63 Amp. TP MCB |
| 732 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. water closet of size 780x370x690 mm |
| 733 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- |
| 734 | (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 735 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. |
| 736 | 32 mm dia (for wash basin) |
| 737 | 40 mm dia (for sink and urinal) |
| 738 | Providing & Fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 739 | Providing & fixing viterous china toilet paper holder. |
| 740 | Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal |
| 741 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade |
| 742 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 743 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms |
| 744 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 745 | Providing and fixing PTMT grating of approved quality and colour. Circular type:125 mm nominal dia with 25 mm waste hole |
| 746 | Providing & fixing soil, waste and vent pipes. |
| 747 | a) 100mm dia centrifugally cast iron S & S pipe. |
| 748 | b) 75mm dia centrifugally cast iron S & S pipe. |
| 749 | Providing lead Caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameters. |
| 750 | 100 mm |
| 751 | 75 mm |
| 752 | Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc. |
| 753 | a) for 100mm dia pipe. |
| 754 | b) for 75mm dia pipe. |
| 755 | Providing & fixing cast iron coller. |
| 756 | a) 100mm dia. |
| 757 | b) 75mm dia. |
| 758 | Providing & fixing upvc SWR bend confirming to IS -14735 |
| 759 | 110mm dia |
| 760 | Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. |
| 761 | a) 100mm |
| 762 | b) 75mm |
| 763 | Providing and fixing centrifugaly cast iron single equal plain junction of required degree. |
| 764 | 100x100x100mm |
| 765 | 75x75x75mm |
| 766 | Providing and fixing cast iron terminal guard. |
| 767 | 100 mm |
| 768 | 75 mm |
| 769 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 770 | Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work). |
| 771 | Internal work-Exposed on wall |
| 772 | 15mm dia nominal bore |
| 773 | 20mm dia nominal bore |
| 774 | 25mm dia nominal bore |
| 775 | 32mm dia nominal bore |
| 776 | Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work. |
| 777 | 15mm dia nominal bore |
| 778 | 20mm dia nominal bore |
| 779 | 25mm dia nominal bore |
| 780 | 32mm dia nominal bore |
| 781 | Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall. |
| 782 | (internal work) |
| 783 | Exposed on wall |
| 784 | a) 15mm dia nominal outer dia pipes |
| 785 | a) 20mm dia nominal outer dia pipes |
| 786 | Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 787 | 25 mm nominal bore |
| 788 | 32 mm nominal bore |
| 789 | Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats). |
| 790 | 25 mm nominal bore |
| 791 | Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions. |
| 792 | Providing & fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS 8931. |
| 793 | Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 794 | Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931. |
| 795 | SCHEDULE OF QUANTITIES FOR EXTERNAL SEWERAGE SYSTEM - I |
| 796 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, |
| 797 | in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. |
| 798 | a) Pipes 80mm to 300mm diameter. |
| 799 | Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. |
| 800 | 150mm diameter |
| 801 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. |
| 802 | 150mm diameter |
| 803 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design |
| 804 | Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). |
| 805 | With FPS bricks of class designation 75 |
| 806 | (i) For Sewer Line |
| 807 | Providing and fixing square mouth S. W. Gully trap grade `A' complete with C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design |
| 808 | 180 x 150 mm. size P type |
| 809 | Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. |
| 810 | Providing & fixing of B 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4\\" x 3\\" x 3mm, in SS 304 and in SSS finish. Suitable for door weights upto 120kgs. Template Drilled. |
| 811 | Providing & fixing of Grab Bar of Length 610mm, 25mm Diameter in Satin stainless Steel Finish. |
| 812 | Providing & fixing of Disable sign plate 3040-D for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304 satin stainless steel finish. Marking in black. |
| 813 | Providing & fixing of floor stop half dome with 45mm dia with fixing accessories, in satin Chrome. |
| 814 | EARTH WORK |
| 815 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge. In all kind of soil |
| 816 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. |
| 817 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 818 | ANTI TERMITE WORK |
| 819 | Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos E.C. 20% with 1% concentration |
| 820 | P.C.C. WORK |
| 821 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 822 | R.C.C. WORK |
| 823 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishingand reinforcement as per direction of the engineer-in-charge; Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 824 | All works upto plinth level |
| 825 | All works above plinth level upto floor V level |
| 826 | Providing centering & shuttering including strutting, propping etc. & removal of form including all materials, labour and T & P etc. required for proper completion of work all complete |
| 827 | Foundations, footings, bases of columns, etc. for massconcrete |
| 828 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 829 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 830 | Suspended floors, roofs, landings, balconies and access platform |
| 831 | Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc |
| 832 | Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 300 mm dia pile |
| 833 | Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter(only the nos. of extra bulbs are to be paid) 300 mm dia piles |
| 834 | Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing. Note: 2. Testing agency shall submit the design of loading platform for the approval of Engineer-in-charge. |
| 835 | Group of two or more piles upto 50 tonne Safe capacity |
| 836 | Initial test (Test Load 2.5 times the Safe capacity) |
| 837 | Routine test (Test Load 1.5 times the Safe capacity) |
| 838 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 839 | BRICK WORK |
| 840 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 841 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 842 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 843 | FINISHING WORK |
| 844 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 845 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 846 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. |
| 847 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm |
| 848 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 849 | DOOR & WINDOW WORK |
| 850 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class teak wood |
| 851 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 852 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 853 | Frame anchor HRD-C 10x140 |
| 854 | Frame anchor HRD-C 10x120 |
| 855 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 5 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick |
| 856 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 857 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm |
| 858 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
| 859 | (a) 250 mm x 10mm |
| 860 | (a) 200 mm x 10mm |
| 861 | Providing and fixing bright finished brass handles with screws etc. complete:125 mm |
| 862 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 863 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 864 | FLOORING WORK |
| 865 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm |
| 866 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm |
| 867 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Medium shade pigment using 50% white cement 50% Grey cement |
| 868 | 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. Red sand stone |
| 869 | MISSLENIOUS WORK |
| 870 | Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases. |
| 871 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”: With average thickness of 120 mm and minimum thicknessat khurra as 65 mm. |
| 872 | Providing and applying integral crystalline slurry of hydrophilic innature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 22.23.1 For vertical surface two coats @ 0.70 kg per sqm |
| 873 | Providing and applying fibre reinforced elastomeric liquid waterproofing membrane with resilient acrylic polymers having SunReflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
| 874 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 875 | Point wiring in PVC Conduit |
| 876 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 877 | Group C |
| 878 | Power plug wiring in PVC conduit (2 x 4 sqmm.) :- |
| 879 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVCinsulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 880 | Circuit / Sub main wiring in PVC conduit :- |
| 881 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 882 | 2 x 1.5 sq.mm. + 1 x 1.5 sq.mm. Earth wire |
| 883 | 2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire |
| 884 | 4 x 6 sq.mm. + 2 x 6 sq.mm. Earth wire |
| 885 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 886 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 887 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required |
| 888 | 20 mm. |
| 889 | 25 mm. |
| 890 | 32 mm. |
| 891 | S/F light plug point modular type accessories :- |
| 892 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required |
| 893 | S/F power plug point modular type accessories :- |
| 894 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 895 | S/F modular type electronic fan regulator :- |
| 896 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 897 | S/F modular type blanking plate :- |
| 898 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 899 | TELEPHONE, TELEVISION AND DATA NETWORK |
| 900 | TELEPHONE WIRING IN EXISTING CONDUIT :- |
| 901 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required |
| 902 | 2 Pair |
| 903 | S/F MODULAR BOXES, BASE & COVER PLATE :- |
| 904 | Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc as required |
| 905 | 1 or 2 Module (75 mm x 75 mm) |
| 906 | S/F MODULAR TYPE SWITCH / SOCKET :- |
| 907 | Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc as required |
| 908 | Telephone Socket outlet |
| 909 | DISTRIBUTION BOARDS, MCB's, MCCB's AND SFU's |
| 910 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 911 | 4 way (4 + 12), Double door, horizontal type |
| 912 | 6 way (4 + 18), Double door, horizontal type |
| 913 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 914 | single pole |
| 915 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 916 | 40 amps. |
| 917 | 63 amps. |
| 918 | Supplying & fixing single pole, blanking plate in the existing MCB DB complete etc. as required. |
| 919 | Supplying and fixing 20 A, 415 V, TPN Industrial type socketoutlet, with 4 pole and earth, metal enclosed plug topalongwith 20 A \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 920 | G.I. EARTHING |
| 921 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 922 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 923 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 924 | ERECTION OF LIGHTING FIXTURES AND FANS |
| 925 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. |
| 926 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep |
| 927 | Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT- AAA |
| 928 | Supply and fixing of 12 Watt to 15 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing with extended heat sink, diffuser of Polycarbonate meterial and driver set complete in all respect. CAT- AAA |
| 929 | Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA |
| 930 | Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA |
| 931 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos.blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperaturerise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 932 | 1200 mm sweep |
| 933 | Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete |
| 934 | 300 mm sweep 900 rpm |
| 935 | Supply, installation, testing and commissioning of Main Distribution Board suitable for upto 125 amp FP MCCB incomer and single / three phase outgoing MCB's, IP 43 protection, double metal door, factory fabricated, wall mounting type in surface / recess, powder coated, 415 V / 200 amp copper Bus Bar, earth and neutral bar, removable gland plates, cable glands including connection with outgoing feeders complete in all respect. DB's shall be original factory fabricated of approved make. The rates shall be excluding all incoming and outgoing circuit breakers. |
| 936 | 8 Way TPN |
| 937 | Providing and fixing of following rating Four pole MCCB's at the incomer of Main/sub distribution boards with connections etc. complete as required. |
| 938 | 100 Amp FP MCCB (16 KA) |
| 939 | Supplying, fixing, connecting, testing and commissioning of following rating, ISI marked (IS 8828) 240 / 415 volts, 10 KA, Miniature Circuit Breaker (MCB) of single / double / three / four poles in the existing MCB DB or in existing MS enclosure complete in all respects. |
| 940 | 25 Amp. TP MCB |
| 941 | 40 Amp. TP MCB |
| 942 | 63 Amp. TP MCB |
| 943 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. water closet of size 780x370x690 mm |
| 944 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- |
| 945 | (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 946 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. |
| 947 | 32 mm dia (for wash basin) |
| 948 | 40 mm dia (for sink and urinal) |
| 949 | Providing & Fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 950 | Providing & fixing viterous china toilet paper holder. |
| 951 | Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal |
| 952 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade |
| 953 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 954 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms |
| 955 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 956 | Providing and fixing PTMT grating of approved quality and colour. Circular type:125 mm nominal dia with 25 mm waste hole |
| 957 | Providing & fixing soil, waste and vent pipes. |
| 958 | a) 100mm dia centrifugally cast iron S & S pipe. |
| 959 | b) 75mm dia centrifugally cast iron S & S pipe. |
| 960 | Providing lead Caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameters. |
| 961 | 100 mm |
| 962 | 75 mm |
| 963 | Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc. |
| 964 | a) for 100mm dia pipe. |
| 965 | b) for 75mm dia pipe. |
| 966 | Providing & fixing cast iron coller. |
| 967 | a) 100mm dia. |
| 968 | b) 75mm dia. |
| 969 | Providing & fixing upvc SWR bend confirming to IS -14735 |
| 970 | 110mm dia |
| 971 | Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. |
| 972 | a) 100mm |
| 973 | b) 75mm |
| 974 | Providing and fixing centrifugaly cast iron single equal plain junction of required degree. |
| 975 | 100x100x100mm |
| 976 | 75x75x75mm |
| 977 | Providing and fixing cast iron terminal guard. |
| 978 | 100 mm |
| 979 | 75 mm |
| 980 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 981 | Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work). |
| 982 | Internal work-Exposed on wall |
| 983 | 15mm dia nominal bore |
| 984 | 20mm dia nominal bore |
| 985 | 25mm dia nominal bore |
| 986 | 32mm dia nominal bore |
| 987 | Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work. |
| 988 | 15mm dia nominal bore |
| 989 | 20mm dia nominal bore |
| 990 | 25mm dia nominal bore |
| 991 | 32mm dia nominal bore |
| 992 | Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall. |
| 993 | (internal work) |
| 994 | Exposed on wall |
| 995 | a) 15mm dia nominal outer dia pipes |
| 996 | a) 20mm dia nominal outer dia pipes |
| 997 | Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 998 | 25 mm nominal bore |
| 999 | 32 mm nominal bore |
| 1000 | Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats). |
| 1001 | 25 mm nominal bore |
| 1002 | Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions. |
| 1003 | Providing & fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS 8931. |
| 1004 | Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 1005 | Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931. |
| 1006 | SCHEDULE OF QUANTITIES FOR EXTERNAL SEWERAGE SYSTEM - I |
| 1007 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, |
| 1008 | in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. |
| 1009 | a) Pipes 80mm to 300mm diameter. |
| 1010 | Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. |
| 1011 | 150mm diameter |
| 1012 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. |
| 1013 | 150mm diameter |
| 1014 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design |
| 1015 | Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). |
| 1016 | With FPS bricks of class designation 75 |
| 1017 | (i) For Sewer Line |
| 1018 | Providing and fixing square mouth S. W. Gully trap grade `A' complete with C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design |
| 1019 | 180 x 150 mm. size P type |
| 1020 | Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. |
| 1021 | Providing & fixing of B 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4\\" x 3\\" x 3mm, in SS 304 and in SSS finish. Suitable for door weights upto 120kgs. Template Drilled. |
| 1022 | Providing & fixing of Grab Bar of Length 610mm, 25mm Diameter in Satin stainless Steel Finish. |
| 1023 | Providing & fixing of Disable sign plate 3040-D for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304 satin stainless steel finish. Marking in black. |
| 1024 | Providing & fixing of floor stop half dome with 45mm dia with fixing accessories, in satin Chrome. |
| 1025 | Clearing jungle including uprooting of rank vegetation ,grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 1026 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 1027 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level |
| 1028 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars |
| 1029 | Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided), including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete |
| 1030 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes |
| 1031 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 1032 | Providing wood work in frames of / Railing / false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood |
| 1033 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete |
| 1034 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 1035 | 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class teak wood |
| 1036 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 1037 | Providing & fixing of Bamboo 50 mm dia fixed with nail in hollow MS section all complete in direction of engineer in charge. |
| 1038 | Civil Works |
| 1039 | arth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge. |
| 1040 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 1041 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 1042 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 1043 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : |
| 1044 | Treatment of soil under existing floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: |
| 1045 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for thefollowing grades of concrete.All works upto plinth level |
| 1046 | All work above plinth upto floor V |
| 1047 | All work above plinth upto floor V |
| 1048 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 1049 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 1050 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 1051 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floorV level. |
| 1052 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived fromnatural sources) |
| 1053 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 1054 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 1055 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 1056 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 1057 | Add for plaster drip course/ groove in plastered surface or moulding toR.C.C. projections. |
| 1058 | 20 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) |
| 1059 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction withframe of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 1060 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 1061 | (a) Fabrication of Angle iron door Chaukhats - 35 x 35 x 5 mm with hold fasts etc. all complete |
| 1062 | (b) Fabrication of grill in windows, vents and railing etc. all complete |
| 1063 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 1064 | Finishing walls with textured exterior paint of approved shade as required all complete - new work (two or more coats applied @ 3.28 ltrs./ 10 sqm. over and including base coat of water proofing cement paint applied @ 2.20 kg / 10 sqm.) and curing all complete finish as directed by engineer-in-charge. |
| 1065 | White washing with lime on undecorated wall surface (new work) (two or more coats) to give an even shade including thoroughly brooming to remove all dirt, dust, mortar drops and other foreign matter all complete finish. |
| 1066 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 1067 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 1068 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per IS: 1378) 250x16 mm |
| 1069 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (copper oxidized as per IS: 1378) 150x10 mm |
| 1070 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (copper oxidized as perIS: 1378) 100 mm |
| 1071 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.0 mm thick glass panes (weights not less than 12.50 kg/ sqm) |
| 1072 | Providing and laying integral cement based water roofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing Compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm heightincluding rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarsesand) admixed with water proofing compound conforming to IS : 2645and approved by Engineer-in-charge including laying glass fibre cloth ofapproved quality in top layer of plaster and finally finishing the surface withtrowel with neat cement slurry and making pattern of 300x300 mm square3 mm deep. e) The whole terrace so finished shall be flooded with water fora minimum period of two weeks for curing and for final test. All above |
| 1073 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and makingand finishing the outlet complete. |
| 1074 | Making plinth protection (Apron) 50 mm th. of cement concrete 1: 3 ; 6 (1Cement : 3 Coarse sand : 6 graded Stone agg. 20 mm. nominal size) laid to required slope as required over 75 mm bed of dry brick ballast 40 mm nominal size well rammed including grouting with fine sand, consolidation and finishing the top smooth all complete as per approved specifications. |
| 1075 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate |
| 1076 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 1077 | Providing 6 mm. thick. bearing plaster over walls with Cement mortar 1 : 3 ( 1 Cement : 3 fine sand) finished with a floating coat of neat cement including a thick coat of lime wash all complete as per specifications |
| 1078 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 1079 | Group C |
| 1080 | Power plug wiring in PVC conduit (2 x 4 sqmm.) :- |
| 1081 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVCinsulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 1082 | Circuit / Sub main wiring in PVC conduit :- |
| 1083 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 1084 | 2 x 1.5 sq.mm. + 1 x 1.5 sq.mm. Earth wire |
| 1085 | 2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire |
| 1086 | 4 x 6 sq.mm. + 2 x 6 sq.mm. Earth wire |
| 1087 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 1088 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 1089 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required |
| 1090 | 20 mm. |
| 1091 | 25 mm. |
| 1092 | 32 mm. |
| 1093 | S/F light plug point modular type accessories :- |
| 1094 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required |
| 1095 | S/F power plug point modular type accessories :- |
| 1096 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 1097 | S/F modular type electronic fan regulator :- |
| 1098 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 1099 | S/F modular type blanking plate :- |
| 1100 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 1101 | TELEPHONE, TELEVISION AND DATA NETWORK |
| 1102 | TELEPHONE WIRING IN EXISTING CONDUIT :- |
| 1103 | Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc as required |
| 1104 | 1 or 2 Module (75 mm x 75 mm) |
| 1105 | S/F MODULAR TYPE SWITCH / SOCKET :- |
| 1106 | DISTRIBUTION BOARDS, MCB's, MCCB's AND SFU's |
| 1107 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 1108 | 4 way (4 + 12), Double door, horizontal type |
| 1109 | 6 way (4 + 18), Double door, horizontal type |
| 1110 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 1111 | single pole |
| 1112 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 1113 | 40 amps. |
| 1114 | 63 amps. |
| 1115 | Supplying & fixing single pole, blanking plate in the existing MCB DB complete etc. as required. |
| 1116 | Supplying and fixing 20 A, 415 V, TPN Industrial type socketoutlet, with 4 pole and earth, metal enclosed plug topalongwith 20 A \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 1117 | G.I. EARTHING |
| 1118 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 1119 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 1120 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 1121 | ERECTION OF LIGHTING FIXTURES AND FANS |
| 1122 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. |
| 1123 | Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT- AAA |
| 1124 | Supply and fixing of 12 Watt to 15 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing with extended heat sink, diffuser of Polycarbonate meterial and driver set complete in all respect. CAT- AAA |
| 1125 | Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA |
| 1126 | Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA |
| 1127 | Supply, installation, testing and commissioning of Main Distribution Board suitable for upto 125 amp FP MCCB incomer and single / three phase outgoing MCB's, IP 43 protection, double metal door, factory fabricated, wall mounting type in surface / recess, powder coated, 415 V / 200 amp copper Bus Bar, earth and neutral bar, removable gland plates, cable glands including connection with outgoing feeders complete in all respect. DB's shall be original factory fabricated of approved make. The rates shall be excluding all incoming and outgoing circuit breakers. |
| 1128 | 8 Way TPN |
| 1129 | Providing and fixing of following rating Four pole MCCB's at the incomer of Main/sub distribution boards with connections etc. complete as required. |
| 1130 | 100 Amp FP MCCB (16 KA) |
| 1131 | Supplying, fixing, connecting, testing and commissioning of following rating, ISI marked (IS 8828) 240 / 415 volts, 10 KA, Miniature Circuit Breaker (MCB) of single / double / three / four poles in the existing MCB DB or in existing MS enclosure complete in all respects. |
| 1132 | 25 Amp. TP MCB |
| 1133 | 40 Amp. TP MCB |
| 1134 | RAIN WATER HARVESTING PITS |
| 1135 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 1136 | All kinds of soil (70X8) |
| 1137 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in |
| 1138 | Cement mortar 1:6 (1 cement : 6 coarse sand) (25X8) |
| 1139 | CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT |
| 1140 | 12 mm cement plaster finished with a floating coat of neat cementof mix : |
| 1141 | 1:4 (1 cement: 4 fine sand)(100X8) |
| 1142 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 1143 | RCC (1cement : 1.5 corase sand :3 stone aggregate) (3.50X8) |
| 1144 | FORM WORK |
| 1145 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : |
| 1146 | Suspended floors, roofs, landings, balconies and access platform. (20X8) |
| 1147 | STEEL REINFORCEMENT |
| 1148 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. |
| 1149 | Hot rolled deformed bars. (180X8) |
| 1150 | Boring/drilling bore well of required dia for casing/ strainer pipe, bysuitable method prescribed in IS: 2800 (part I), including collectingsamples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. |
| 1151 | All types of soil |
| 1152 | 300mm dia (60X8) |
| 1153 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. |
| 1154 | 150 mm nominal size dia. (60X8) |
| 1155 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.(3X8) |
| 1156 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.(3X8) |
| 1157 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. (3X8) |
| 1158 | Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. (2.50X8) |
| 1159 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. |
| 1160 | 150 mm clamp (2X8) |
| 1161 | Providing and fixing Bail plug/ Bottom plug of required dia to thebottom of pipe assembly of tubewell as per IS:2800 (part I). |
| 1162 | 150mm dia (1X8) |
| 1163 | Providing, fixing in position of ISI marked UV stabilized UPVC pipes for venting , Type-B as per IS : 13592 suitable for rubber ring joints for vertical pipes and solvent cement joints for horizontal pipes, including all neccessary specials and fittings (Make : Supreme / Astral / Ajay / Ashirwad) |
| 1164 | 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) (15X8) |
| 1165 | Providing and fixing in position pre-cast R.C.C. manhole cover andframe of required shape and approved quality |
| 1166 | Rectangular shape 600x450 mm internal dimensions. (5X8) |
| 1167 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS:10910, on 12 mm dia. Steel bar conforming to IS:1786, having minimum cross section as 23mm x 25 mm and overall minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded leg having 2 mm tread on top surface by ribbing or chequering besides necessary and adequated anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per spaecifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. (30X8) |
| 1168 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. |
| 1169 | 300 mm dia |
| 1170 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. |
| 1171 | 150 mm nominal size dia |
| 1172 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. |
| 1173 | 150 mm nominal size dia |
| 1174 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. |
| 1175 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit) |
| 1176 | with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 1177 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of : 150 mm dia |
| 1178 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp. |
| 1179 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 150 mm dia. |
| 1180 | Supply of submersible pump of make KSB / Crompton / kirloskar 10 HP with control panel, support wire etc. complete. |
| 1181 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth onductor by clamps etc. submersibble cable from pump panel to submersible pump 6 sq. mm 4 core |
| 1182 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal bore |
| 1183 | Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) 40 mm nominal bore |
| 1184 | Supply of 100mm dia Johnson screen. |
| 1185 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil |
| 1186 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 1187 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cementcontent, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Concrete of M25 grade with minimum cement content of 330 kg /cum All works above plinth level upto floor V level |
| 1188 | As in item 4 above but for slabs |
| 1189 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars |
| 1190 | Centering and shuttering including strutting, propping etc. and removalof form for Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc. |
| 1191 | Supply & Fixing of’ 4Mtr. Decorative type pole (Make Twinkle Lite /Orient / Neri ) the Pole shall have decorative base the ribbed extrusion pole shall be of G.I with minimum thickness of 3.2mm/81mm Dia and 15 nos. of grooves on entire outer-circular surface and through out the length of pole. The pole shall have service window at bottom profile. The pole shall be provided with built in control box for electrical connection, looping-in-looping out-arrangement with MCB and connector. The pole is duly primer coated and painted with P.U. painted in dark grey colour. Pole is suitable for post top fixture. Fixture : Ornamental Decorative with Single Crown 50 Watt LED Post Top luminaire made of aluminium housing duly powder coated/PU painted with PC/PMMA clear/ frosted diffuser with sturdy triple arm. MCPCB having high Lumen LED's are mounted on aluminium heat sinks. etc all complete in direction of engineer in charge. |
| 1192 | Supplying, installing, testing and commissioning of Solar LED Street Light comprising of high efficiency LED luminaire with minimum ___ watt output, mounted on GI/Octagonal pole of height ___ m, complete with solar photovoltaic panel of minimum ___ Wp, lithium battery / tubular battery of suitable capacity, MPPT/charge controller, dusk to dawn automatic operation, including all accessories such as mounting brackets, clamps, cables, nuts & bolts, foundation with RCC (1:2:4), earthing, civil works, wiring, testing and commissioning, complete in all respects as per direction of Engineer-in-Charge. |
| 1193 | Supplying Testing & Installation of Led Flood Light Luminaire 50W Philips Make Model - BVP 140 Led 50 CW PSU WH/ Twinkle Lite /Orient / Neri ) etc all complete of direction of engineer in charge. |
| 1194 | Supplying Testing & Installation of Led Flood Light Luminaire 100WV Philips Make Model- BVP 142 Led 100 CW PSU WH /Twinkle Lite /Orient / Neri ) etc all complete of direction of engineer in charge. |
| 1195 | Supplying Testing & Installation of Garden Spike Light 12W WW Make Philips/ Twinkle Lite /Orient / Neri ) etc all complete of direction of engineer in charge. |
| 1196 | Supply and fixing of decorative 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect. Make Philips/ Twinkle Lite /Orient / Neri ) |
| 1197 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required |
| 1198 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 1199 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brassn nut bolt & spring washer spaced at 50mm) |
| 1200 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 1201 | 6.00 Sqmm 4 Core |
| 1202 | 25.00 Sqmm 3.5 Core |
| 1203 | 70.00 Sqmm 3.5 Core |
| 1204 | Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. |
| 1205 | The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only Incoming200 Amp. TPN-1 No Outgoing 100 Amp. TPN-1 No and 63 Amp. TPN-3 Nos. Cat. B. Cubicle Type |
| 1206 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.40 A TPN |
| 1207 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required. |
| 1208 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 1209 | 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 1210 | Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. |
| 1211 | Sound System :- Good acoustics control sound frequencies and cancel extra noise to enhance experience of 3D surround sound of the show. Halls will meet the standards of Dolby/DTS and immersive sound technology OPEN SOUND regarding the rationing of levels of penetrating noise into the hall. |
| 1212 | With coaxial two-way drivers, the 125-watt DesignMax DM6SE loudspeaker offers rich lows and clear, intelligible highs — along with premium aesthetics that complement any commercial sound installation. The DM6SE features a 6.5-inch woofer and a 1.25-inch coaxial tweeter mounted within the DispersionAlignment system, delivering a frequency range of 59 Hz – 20 kHz |
| 1213 | Ideal for zone-expansion applications, Bose PowerSpace amplifiers enhance any premium commercial sound installation with clean,reliable power — and digital connectivity. A Bose AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose DSPs via a single Cat 5 cable. The PowerSpace P21000A provides 1000 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or highimpedance loads — without bridging — and even send double power to a single zone. For premium commercial applications, BosePowerSpace amplifiers provide the power and performance to get the job done — pure and simple. |
| 1214 | WiFi, Direct Streaming, Airplay, Spotify Connect and Bluetooth 5.0 wireless capability to your ampli ers, preamps and receivers. Mix and match any ombination of Kasper treamers to create a custom multiroom system and play the same music throughout your home,send di erent sources to each room at the same time, or create your own custom-de ned multiroom zones... All controlled via our streamApp |
| 1215 | Speaker Wire 2.5mm @260/Mtr as per requirment |
| 1216 | Cost of Civil construction |
| 1217 | Consultancy , installation and Commissioning of STP |
| 1218 | O& M Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender