Tender For Special Repair/ Replacement Of Lt Ug Cables And Connected Works At Office Area Of Ta Unit At Nrms.
Tender Value
8.37 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
2 days left
EMD
16800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raipur → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/ Replacement Of Lt Ug Cables And Connected Works At Office Area Of Ta Unit At Nrms.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for takingout of different size cable from trench/ walls/ elctric poles, etc |
| 2 | M&L for Exc in trenches not exc. 1.5 m wide and not exc. 1.5 in depth for foundation of poles, stay assy etc. and getting out in hard / dense soil complete all as specified and directed. |
| 3 | M&L for Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed. |
| 4 | M&L for Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed. |
| 5 | M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable, complete all as specified and as directed by Engr-In-Charge. |
| 6 | M&L in rep un-reinforced precast concrete cable cover, class LV , type 1 , size 250mm x 150mm x 40mm complete , all as specified and directed by Engr-in-charge. |
| 7 | M&L for Laying of XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) in trenches/ on walls/ poles of following sizes, all as specified and directed by the Engineer-in-Charge.Note: Cable shall be issued free for laying under Schedule ‘B’ items. (a) 240 sqmm 3.5 core |
| 8 | All as per item no 7.00 above but with 120 sqmm 3.5 core |
| 9 | All as per item no 7.00 above but with 95 sqmm 3.5 core |
| 10 | All as per item no 7.00 above but with 70 sqmm 3.5 core |
| 11 | Supplying, installing, testing and commissioning in replacement , Outdoor cubical LT control panel suitable for 3 phase, 4 wire, 415 volts, 50 Hz and CPRI approved, factory made in an approved factory , panel with suitable gasket to make it dust / vermin proof & general construction confirming to IS:8623 / 93, compartmentalized cubical indoor type with compartments for each out going and incoming feeders of Appx size 1500 x 1200 x 500mm (LxHxD) made of 2 mm thick CRCA sheet painted with one coat of epoxy based powder coating with support of angle iron of 90 x 90 x 8 mm angle iron bottom legs frame with double hinged front openable shutters of each feeder control unit with locking arrangement in front, PVC sleeved electrolyte copper bus bar with Tin Coating of 600 Amps capacity for each phases and neutral fixed on suitable insulator all housed in suitable bus bar chamber along with provision of necessary cable entry/exit boxes fixed on suitable PCC foundations and comprising of following items:- a) 250 Amps 4P, 36KA MCCB - 01 No (Make : Legrand/Siemens/ABB)(b) 160 Amp 4P, 16KA MCCB & ROH - 02 No (Make : Legrand/Siemens/ABB)(c) 125 Amp 4P, 16KA MCCB & ROH - 01 No (Make : Legrand/Siemens/ABB)(c) 100 Amp TP, 16KA MCCB & ROH - 01 No (Make : Legrand/Siemens/ABB)(d) 63 Amp TP, 16KA MCCB & ROH - 02 No (Make : Legrand/Siemens/ABB) (e) Multifunction Meter - 01 No ((Make : Schneider/Legrand/Siemens/ABB)(f) Digital 0-500V Volt Meter - 01 No (Make : Schneider/L&T/Socomec)(g) Digital 0-500A Ammeter - 01 No (Make : Schneider/L&T/Socomec)(h) Selector switch for V/A meter - 02 No (Make : Kaycee/L&T)(j) R Y B Phase Indication Lamps - 03 Nos (Make : Schneider/L&T)(k) CTs 400/5A, 15VA, CL-1 - 03 Nos (Make : Kappa)(l) Panel internal control wiring using PVC copper flexible in duct of suitable size - 01 Job |
| 12 | Supplying, installing, testing and commissioning in replacement of Outdoor cubical LT control panel suitable for 3 phase, 4 wire, 415 volts, 50 Hz and CPRI approved, factory made in an approved factory , panel with suitable gasket to make it dust / vermin proof & general construction confirming to IS:8623 / 93, compartmentalized cubical indoor type with compartments for each out going and incoming feeders of suitable size, made of 2 mm thick CRCA sheet painted with one coat of epoxy based powder coating with support of angle iron of 90 x 90 x 8 mm angle iron bottom legs frame with double hinged front openable shutters of each feeder control unit with locking arrangement in front, PVC sleeved electrolyte copper bus bar with Tin Coating of 400 Amps capacity for each phases and neutral fixed on suitable insulator all housed in suitable bus bar chamber along with provision of necessary cable entry/exit boxes fixed on suitable PCC foundations and comprising of following items:- (a) 100 Amps 4P, 36KA MCCB - 01 No (Make : Legrand/Siemens/ABB)(b) 63 Amp 4P, 16KA MCCB & ROH - 02 No (Make : Legrand/Siemens/ABB) (c) R Y B Phase Indication Lamps - 03 Nos (Make : Schneider/L&T)(d) Panel internal control wiring using PVC copper flexible in duct of suitable size - 01 Job |
| 13 | M&L for fabrication, supply, fixing and erection in rep of suitable size outdoor junction box made out of CRCA sheet of adequate thickness with hinged door, neoprene rubber gasket, locking arrangement, removable gland plate and copper bus bar with Tin Coating of 400 Amps capacity for each phases and neutral fixed on suitable insulator all housed complete with necessary insulators, tinned copper links, hardware, cable glands, lugs and internal connections for distribution/looping of power cables, including grouting/fixing on wall/floor/support structure with cement concrete foundation as required, complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for 50mm light grade GI pipe in rep for cable protection from road crossing |
| 15 | M&L for Cutting holes, mortices, etc. chases in Roads and making good after cable/pipe work is fixed, shall be measured separately under the appropriate Sections except for The making good shall be done with a mix of PCC 1:2:4 type B1 all as specified and directed. |
| 16 | Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. 36,000.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender