Tender For Fire Suppression System For Hq 2 Corps Including Raina Auditorium & Yana Complex
Tender Value
10.76 Crore
Estimated cost
Bid Submission
22 Sep 2026
34 days left
EMD
8.63 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fire Suppression System For Hq 2 Corps Including Raina Auditorium & Yana Complex
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A'Section-I (Building Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as \\"Rs 0.00\\" under Col. 5 siginifies this fact only. |
| 2 | Design, supply, construction, testing and commissioning of RCC Underground(UG) sump of capacity 1,00,000 litres complete all as specified and directed. |
| 3 | Design, supply, construction, testing and commissioning of RCC Underground(UG) sump of capacity 1,75,000 litres complete all as specified and directed. |
| 4 | Design, supply, construction of RCC framed pump houses size 8.46 metre X 6.46 metre complete all as specified and directed. |
| 5 | Design, supply and construction of RCC framed pump houses of size 10.46 metre X 6.46 metre complete all as specified and directed. |
| 6 | Design, supply and construction of mild steel sturcture for staging of overhead water tank 10,000 litres capacity of height upto 6 metres with provn of RCC foundation suitable for steel structure complete all as specified and directed. |
| 7 | Design, supply and construction of mild steel sturcture for staging of overhead water tank 10,000 litres capacity of height upto 15 metres with provn of RCC foundation suitable for steel structure complete all as specified and directed. |
| 8 | Design, supply and construction of mild steel structure for staging of overhead water tank 5000 litres capacity of height upto 15 metres with provn of RCC foundation suitable for steel structure complete all as specified and directed. |
| 9 | Total amount of Sch 'A' Sec II (SITE CLEARANCE, SITE DEVELOPEMENT & MISC. EARTH WORKS) Lump sum price worked out by the contractor for \\" SITE CLEARANCE & Earth Works \\" as listed in schedule 'A' Part-I |
| 10 | Total amount of Sch 'A' Sec III (ADDITION/ALTERATION TO EXISTING BLDGS) Lump sum price worked out by the contractor for \\" BUILDING WORKS \\" as listed in schedule 'A' Part-III |
| 11 | Total amount of Sch 'A' Sec IV (INTERNAL ELECTRIFICATION ) Lump sum price worked out by the contractor for \\" INTERNAL E&M SERVICES \\" as listed in schedule 'A' Part-IV |
| 12 | Total amount of Sch 'A' Sec V (LIGHTINING PROTECTION ) Lump sum price worked out by the contractor for \\" INTERNAL E&M SERVICES \\" as listed in schedule 'A' Part-V |
| 13 | Total amount of Sch 'A' Sec VI (FIRE HYDRANT AND SPRINKLER ) Lump sum price worked out by the contractor for \\" INTERNAL E&M SERVICES \\" as listed in schedule 'A' Part-VI |
| 14 | Total amount of Sch 'A' Sec VII (External Water Supply Works) Lump sum price worked out by the contractor for \\" External Water Supply Works \\" as listed in schedule 'A' Part-VII |
| 15 | Total amount of Sch 'A' Sec VIII (External Elect Supply Works) Lump sum price worked out by the contractor for \\" External Elect Supply Works \\" as listed in schedule 'A' Part-VIII |
| 16 | Total amount of Sch 'A' Sec IX (FIRE HYDRENT & SPRINKLER WORK) Lump sum price worked out by the contractor for \\" FIRE HYDRENT & SPRINKLER WORK \\" as listed in schedule 'A' Part-IX |
| 17 | Schedule 'A'Section-X (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as \\"Rs 0.00\\" under Col. 5 siginifies this fact only. |
| 18 | Design and preparation of detailed report and corresponding drawings through any specialised agency dealing with planning, designing and execution of fire hydrant system, fire suppresion system, sprinkler system, gas flooding system and automatic addressable type fire detection cum alarm system having minimum experience of five years in the field and approved from state/central government fire department. The buildings involved for these fire safety arrangements are Raina Auditorium, Yana Complex, Adm block, Education block, P1, P2, and P3 buildings of HQ. The following report shall be prepared based on report/ recommendations of CFEES New Delhi attached in tender documents, relevant latest IS codes and NBC code 2016. The following documents shall be prepared and submitted for approval of Accepting Officer after vetting from CFEES New Delhi.(i) - Design Report supported by all calculations and relavent supporting docs.(ii) - Hydraulic Analysis report using Pipenet or other appropriate software.(iii) - Schematic plan. (iv) - Layout plan in A0 sheet. (v) - Detailed drawings showing location, placement of items/equipment/accessories, fire-pipeline routes etc alongwith measurements/dimensions in A0 sheet (It shall have all views for clear understanding). (vi) - Power and control wiring diagram, fire alarm panel, fire pipe routing and accessories etc all complete. NOTE- (a) Line diagram alongwith measurements/dimensions of above stated buildings are attached. |
| 19 | OVERHEAD WATER TANKSProviding and Fixing Hot compressed molded SMC (sheet molding compound) panel tanks for 5000 litres capacity of as per BIS : 14399 Part-l & Part-ll lSl Marked SMC Panel Tanks. Roof & Base of SMC Panel tanks having panels of size 1.00 metre X 1.00 metre, 1.00 meter X 0.5 meter Side Walls of tanks shall be constructed using SMC panels of size 1.00m x 1.00m panel as per site requirement. One manhole of diameter 600mm should be provided on the roof of tank with lockable lid and aluminium ladder above 1 metre height inside & outside the tank for access. Tanks must have vertical iron posts tied firmiy with Tie rods. The panel should withstand Hydrostatic pressure of at least 4 times the working load and should be provided with HDG bolts, nuts, washers, food grade foam gasket, cleats, including PVC pipe support of 110mm dia fo.r the roof of top panels. Tank shall be erected on steel base which must be kept at RCC base foundation at site as per manufacturer's specifications & design.inlei and outlet, overflow & drain should be provided with tank. The Tank installation work will be carried out at roof of building /ground level. (Note.- The tanks panels must be printed with lSl Logo, lSl Certification Number, CML Number, Batch Number etc.) |
| 20 | Providing and Fixing Hot compressed molded SMC (sheet molding compound) panel tanks for 10,000 Litres capacity as per BIS : 14399 Part-l & Part-ll lSl Marked SMC Panel Tanks of approved brands. Roof & Base of SMC Panel tanks having paneis of size 1.00 metre X 1.00 metre, 1.00 meter X 0.5 meter Side Walls of tanks shall be constructed using SMC panels of size 1.00m x 1.00m panel as per site requirement. One manhole of diameter 600mm should be provided on the roof of tank with lockable lid and aluminrum ladder above 1 metre height inside & outside the tank for access. Tanks must have vertical iron posts tied firmiy with Tie rods. The panel should withstand Hydrostatic pressure of at least 4 times the working load and should be provided with HDG bolts, nuts, washers, food grade foam gasket, cleats, including PVC pipe support of 110mm dia for the roof of top panels. Tank shall be erected on steel base which must be kept at RCC base foundation at site as per manufaciurer's specifications & design inlet and outlet, overflow & drain should be provided with tank. The Tank installation work will be carried out at roof of building /ground level. (Note.- The tanks panels must be printed with lSl Logo, lSl Certification Number, CML Number, Batch Number etc.) |
| 21 | ADDITION/ ALTERATION WORKS TO EXISTING BUILDINGSSupply & fixing of 12mm thick Glass reinforced gypsum (GRG) suspended ceiling at any height of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 15x32 mm made from 0.33 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 15x32 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 15x32 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.4 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, 20% perforation area with 1.8 mm dia holes and having excellent noise absorption of 1 NRC (for the base panel) as per ISO: 354. Fire Ratings as per BS 476 Part 5,6 and 7 class 1 and P, water resistant and thermal insulated NRC (Noise Reduction Coefficient).all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Note: The rates is inclusive of providing scaffolding and safety equipments for height upto 15 to 20 metres and nothing extra shall be admissible into this account. |
| 22 | Supply & fixing in position acoustics wall paneling at all heights with GRG ( Glass Fibre Reinforced Gypsum ) panels/tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99% , NRC 0.70 to 0.85 as per IS 8225:1987, Non Combustible as per BS 476 ( Part 4)-1970 and light Reflectance of 75% to 85% ( Minimum ), comprising of a frame made from especially fabricated galvanized mild steel sheet 0.50 mm thick pressed section(galvanizing @120 grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastener with 10mm bolt. This same channel is then to be fixed in horizontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glass wool of 50mm thickness is then to be inserted in the slots and finally GRG (Glass Reinforced Gypsum) non-combustible panels/tiles are to be screw fixed with self-Tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing compound and fiber joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for paneling as per manufacturer’s specification complete all as specified and directed. Note: The rates is inclusive of providing scaffolding andsafety equipments for height upto 15 to 20 metres and nothing extra shall be admissible into this account. |
| 23 | S&F of fixing GI Metal Suspended ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece complete all as specified and directed. |
| 24 | Dismantling of false ceiling board of any description/ size and cutting desired size for smoke detector and refixing in same position complete all as specified and directed. |
| 25 | Supply and fixing 8-10mm thick flute profile designer PVC paneling with panel of width 250mm to 300mm fixed to wall/ceiling with crew and rawel plug including PVC beading (U,L section) wherever required complete all as specified and directed. |
| 26 | Material & Labour for wooden wall paneling with 12mm thick 4 ply interior grade BWP and 3mm thick decorative face veneer on one face, fixed on wooden frame square,rectangular or triangular in section, clean sawn,of section exceeding 13 sq cm but not exceeding 25 sq cm of suitable size on existing walls with nails/screws and wooden panellig surface finished with 2 coats of melamine polish and providing plain/designer fillets at edges of of paneling as directed and specified, square, rectangular or triangular in section, clean sawn,of section exceeding 13 sq cm but not exceeding 25 sq cm but bull nosed, splayed, chamfered or rounded on one edge or face secured with nails or brads complete all as specified and directed. |
| 27 | Material & Labour non skid ceramic designer tiles of size 300 x 300 mm x10 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15 mm thick screed bed or bedding layer in CM (1:4) including demolition complete all as specified and directed. . |
| 28 | Material and labour for preparation of new plastered wall surfaces any height upto 15-20 metre and applying two coats of acrylic emulsion exterior grade (100%) paint etc all as specified & as suggested by the manufacturers. Note: The rates is inclusive of providing scaffolding and safety equipments for height upto 15 to 20 metres and nothing extra shall be admissible into this account. |
| 29 | Supply & fixing in repairs for chromium plated single lever basin mixer without popup and 450 mm long braided hoses complete all as specified and directed . |
| 30 | Supply & fixing in repairs for chromium plated hand shower ( health faucet) with 8 mm dia 1 metre long flexible tube and wall hook complete fixed to wall complete all as specified.(Make-Jaquar or equivalent in hindware/Parryware) |
| 31 | Supply & fixing in repairs counter top wash hand basin size 440x525x195 including 32 mm dia brass chromium plated waste coupling with PVC pipe as approved by GE , complete all as specified. |
| 32 | Supply & fixing in repairs Cascade duel flush EWC wall mounted including PP seat cover , hinges fixing accessories with complete fixing with all necessary items size 640x360x690 mm with S trap size 220 mm complete all as specified and directed. |
| 33 | Supply & fixing in repairs toilet paper holder with flap chromium plated complete all as specified and directed. |
| 34 | Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to any sunk and raised moulding surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh ( Fillets, metal frame work paid separately) including dismantling of old false ceiling and ceiling grids complete of any description complete all as specified & directed. |
| 35 | Material & Labour for taking down cement or cement lime plaster of any description and any height upto 15-20 metre on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge. Note: The rates is inclusive of providing scaffolding and safety equipments for height upto 15 to 20 metre and nothing extra shall be admissible into this account. |
| 36 | Material & Labour for vitrified coloured tiles premium quality joint free 10 mm thick (square/ rectangular) area of each tiles exceeding 0.36 Sqm but not exceeding 1 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 15mm cement screed bed in CM (1:4) complete all as specified and directed. |
| 37 | M&L for glazed ceramic coloured tiles in vertical surface 300 x 450 x 7mm or 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement as directed by GE, including 10mm thick chemical adhesive complete all as specified and as directed . |
| 38 | Material & Labour for providing and laying at any height 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg/Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bituminious primer @ 0.40 ltr / Sqm by the same membrane manufactures roof membrane over existing RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg/ ltr at 25 degree centigrade on prepared surface.(c) Apply on APP membrane a coat of hot blown bitumen grade 85/25 conforming to IS 702 @ 1.20 Kg per Sqm(d) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap.(e) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. |
| 39 | Material & Labour for cement concrete tiles 30 cm x 30cm x 20 mm thick, machine pressed laid on screed bed and joints grouted flush in CM (1:3) mixed with 5% crude oil by weight of cement including screed bed 15 mm thick in cement mortar (1:6) , complete, all as specified and as directed. |
| 40 | Material and labour for 100 mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed |
| 41 | Supply and fixing , water storage tank, 500 litre capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including disconnecting and dismantling of existing water tanks and removing from site all as specified in SSR Part–I , complete all as specified and as directed. |
| 42 | FIRE ALARM & DETECTION SYSTEMSupply, Installation, testing & commissioning of optical thermal (Multi) detector (heat & smoke) radio-linked optical thermal detector operates both with an optical sensing chamber based on the principle of scattered light as well as with a rate of rise thermal sensor. The detector communicates with a fire detection control panel in loop technology via the loop RF interface. Two lithium batteries are accommodated in the detector base one as backup. The two coloured LED indicator with 360 visibility. Mechanical theft protection in the base. Radio transmission of 150 m (in free air), operating at de-licensed frequency range of 865MHz all as specified and directed. |
| 43 | Supply, Installation, Testing & Commissioning of analouge Addressable Wall Sounder weather proof as standard and is equipped with 3 levels of volume adjustment and 32 recognised tones which can be set locally at the sounder. When configured onto a FIREwave Translator, the Wireless Sounder is fully addressable and benefits from intelligent control, test and monitoring complete all as specified and as directed. |
| 44 | Supply, install, test & commissioning of RF translator wireless device which can control upto 32 detectors modules or signalling devices, configuration through manual or PC software, up to 32 fully intelligent wireless field devices. Operating at frequency of 865-867 MHz. status indication via 3 LEDs, IT communicates with the control panel via the loop, radio transmission range 150m in free air, operating frequency channels 7, all as specified and directed. |
| 45 | Supply, installation, testing & Commissioning of Analouge addressable Wireless Resettable Manual Call Point, Bi Directional wireless communication Fully intelligent Utilises standard low cost lithiumbattery technology, Long battery life, Resettable Element, Clear ‘device activated’ warning flag, High reliability, automatic channel hopping self optimising wireless amplitude and frequency and fixing with suitable size of MS conduit pipe alongwith the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. Communication range with the Translator Module is up to 150 metre in open area complete all as specified and as directed . |
| 46 | Supply, installation, testing & commissioning of active full function repeater panel complies with EN54-2, Network up to 64 panels/repeaters,Programmable one touch test mode,Powerful and versatile cause & effect programming,Cause & effect wizard including:Cause & effect action,Disablement configuration,Test mode configuration 5.25 amp power supply to EN54 part 4,Large graphic display,In built help and alarm information screens,Real time clock,Stylish enclosure design,Soft-touch tactile buttons,2 programmable function buttons,3 programmable front panel mounted LED’s,Improved Front loading Printer (optional)Up to 512 programmable inputs/outputs perpanel via 2 wire RS485 serial link (optional) Simple Windows® graphical configuration utility.It has IP rating IP30 complete all as specified and as directed . |
| 47 | Supply, installation, testing and commissioning of UL listed Microprocesssor based 2 Loop analogue addressable type fire alarm control panel with 80 character LCD display four access levels 500 event historical logging upto 200 detectors all as specified. The panel will have its battery charges and 2 batteries of 7 AH. Cost of batteries and battery charger is deemed to be included in quoted cost of panel complete all as specified and directed . |
| 48 | Supply and lay PVC insulated PVC sheathed cable galvanized steel strip or wire armoured,electric control cables (Heavy duty) with stranded Copper conductor of size 1.5 sq mm 2 core 1100 Volts grade suitable for fire survival all as specified complete all as specified and directed.Note: cost of MS clamp/Saddles placed alongwith wall/ceiling for fixing of cable shall deemed to be inclusive in quoted item rate |
| 49 | Material and labour for concealed / surface point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including medium grade, ISI marked, PVC conduit,medium grade ISI marked not less than 20 mm dia with accessories fixed concealed/surface type on wall/ roof/ ceiling / trusses/ chaneel and including provision of 1.50 sqmm single core PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor green colour as earth conitnuity conductor and connected to common earth dolly with suitable size lugs, including mild steels sunken box or pressed steel terminal box or pressed steel terminal boxes conforming to IS:14772:2000 with earth dolly and coated with two coat of anti corrosive paint over a coat of red oxide primer both internally and externally with and including (provision of new) modular covered plate over sunken box for housing the modular switches, socket outlets., fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for :-Note:-1 Modular metal flush / sunken box, and for modular switch/ socket cover plate & sheet are inclusive in the item rate quoted.2. Only switch, socket to be measured and paid separately. |
| 50 | Switch Modular type 6 Amps, one way, 1 module, 230 Volts, complete all as specified and directed. |
| 51 | Socket modular 2/3 pin, 6 Amps,one way,2 module,230 Volts , complete all as specified and directed. |
| 52 | Supply and fixing exit sign of dimension 300 mm x130 mm x 8 mm made up of Aluminium, Acrylic LED edge light 2 Watt 230 Volt green colour with rechargable battery backup of Minimum 3 Hrs alongwith necessary fixing arrangement fixed on wall/ ceiling all as directed. |
| 53 | Supply and fixing powder coated GI Race Way Cable Tray of size 100 mm x 50mm x 2mm(1 Compartments) incl suitable bracket ,nut, bolt washers, fixed to wall roof etc, complete all as specified and directed |
| 54 | M&L exhaust, Diesel engine driven pump exhaust M. S. pipe class 'C' 150 mm dia including fitting like flanges, bends, reducers, etc. 50 mm thick fibre wool insulation aluminium cladding, 21 gauge, necessary excavation, fixing of silencer connections at engine exhaust, necessary supports, back filling, cutting and making good, bird proof and weather proof flap complete in all respect as directed. |
| 55 | INTERNAL ELECTRIFICATION WORKSM & L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including medium grade, ISI marked, PVC conduit,medium grade ISI marked not less than 20 mm dia with accessories fixed concealed/surface type on wall/ roof/ ceiling and including provision of 1.50 sqmm single core PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor green colour as earth conitnuity conductor and connected to common earth dolly with suitable size lugs, including mild steels sunken box or pressed steel terminal box or pressed steel terminal boxes conforming to IS:14772:2000 with earth dolly and coated with two coat of anti corrosive paint over a coat of red oxide primer both internally and externally with and including (provision of new) modular covered plate over sunken box for housing the modular switches, socket outlets., fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for :-Note:-1. Modular metal flush / sunken box, and for modular switch/ socket cover plate & sheet are inclusive in the item rate quoted.2. Only switch, socket and fan regulators to be measured and paid separately. |
| 56 | One light/bell/fan/exhaust point controlled by one switch 6 amp one way |
| 57 | One 3 pin switch socket combination 6 amp on the independent board. |
| 58 | One 3 pin switch socket combination on same board 6 amp. |
| 59 | M & L for concealed point wiring complete with 2.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including medium grade, ISI marked, PVC conduit,medium grade ISI marked not less than 20 mm dia with accessories fixed concealed/surface type on wall/ roof/ ceiling and including provision of 2.50 sqmm single core PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor green colour as earth conitnuity conductor and connected to common earth dolly with suitable size lugs, including mild steels sunken box or pressed steel terminal box or pressed steel terminal boxes conforming to IS:14772:2000 with earth dolly and coated with two coat of anti corrosive paint over a coat of red oxide primer both internally and externally with and including (provision of new) modular covered plate over sunken box for housing the modular switches, socket outlets., fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for :-Note:-1 Modular metal flush / sunken box, and for modular switch/ socket cover plate & sheet are inclusive in the item rate quoted.2. Only switch, socket and fan regulators to be measured and paid seperately. |
| 60 | M & L for concealed point wiring complete with 4.0 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including medium grade, ISI marked, PVC conduit,medium grade ISI marked not less than 20 mm dia with accessories fixed concealed/surface type on wall/ roof/ ceiling and including provision of 4.0 sqmm single core PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor green colour as earth conitnuity conductor and connected to common earth dolly with suitable size lugs, including mild steels sunken box or pressed steel terminal box or pressed steel terminal boxes conforming to IS:14772:2000 with earth dolly and coated with two coat of anti corrosive paint over a coat of red oxide primer both internally and externally with and including (provision of new) modular covered plate over sunken box for housing the modular switches, socket outlets., fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for :-Note:-1 Modular metal flush / sunken box, and for modular switch/ socket cover plate & sheet are inclusive in the item rate quoted.2. Only switch, socket and fan regulators to be measured and paid separately. |
| 61 | M&L socket modular 2/3 pin, 6 A one way 2 module 230 volts complete all as specified & directed. |
| 62 | M&L socket modular 2/3 pin, 6/16 A one way 2 module 230 volts complete all as specified & as directed 2 module. |
| 63 | Supply & fixing ceiling rose 65x50mm three terminals 230 volt complete all as sprecified and as directed. |
| 64 | Taking down ceiling fan & exhaust fan of any capacity and refixing the same after completion of work complete all as specified and as directed. |
| 65 | Taking down geyser of any capacity and refixing the same after completion of work complete all as specified and as directed. |
| 66 | Supply & fixing electronic type fan regulator modular 100 watt 2 module complete all as specified and as directed. |
| 67 | Supply & fixing lamp holder with LED bulb 12 W , PVC/Polycarbonate type with back plate suitable for LED bulb fitting complete all as specified and as directed. |
| 68 | Taking down ceiling light of 35/36 watt surface/recessed type of any capacity and refixing the same after completion of work including necessary connection complete all as specified and directed. |
| 69 | Supply & laying sub main wiring with two run of 4 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 4 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall and surface on ceiling in PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 70 | S & laying sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 4 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall and surface on ceiling in PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed by the Engineer-in-Charge. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 71 | S & laying sub main wiring with four run of 10 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 10 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall and surface on ceiling in PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed by the Engineer-in-Charge. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Five runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 72 | Supply and fixing in replacement LED tube light fitting 1x18 watt, 230 volts in commercial channel with powder coated CRCA sheet housing with opal diffuser for LED with LED tubelight with high efficient LED in aluminium housing with clear & milky diffuser connecting with twin core twisted flexible copper conductor cable with suitable size rod complete with all accessories complete all as specified and directed. |
| 73 | Supply and fixing LED luminaire 15/18 watt cool/warm typical circular down lighter/COB panel with PVC housing 240V 50 Hz AC supply suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 74 | Supply and fixing sheet metal MCB DBs 8 way with 200 Amps rated bus bar single pole and neutral with acrylic double door IP-43 fixed on wall duly grouted in solid block, including copper lugs/thimbles duly crimped for connection complete all as specified and directed. |
| 75 | Supply and fixing sheet metal MCB DBs 12 way with 200 Amps rated bus bar single pole and neutral with acrylic double door IP-43 fixed on wall duly grouted in solid block, including copper lugs/thimbles duly crimped for connection complete all as specified and directed. |
| 76 | Supply and fixing in replacement MCBs 5 to 40 amp SPN B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed. |
| 77 | S&F in replacement MCBs 5 to 32 amp SP B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed. |
| 78 | Supplying and fixing of VTPN (including MCCB 100 Amp) distribution board 4 way fabricated out of thick high quality CRCA sheet. DBs shall be totally enclosed, suitable for 240V/415V, for indoor application DBs shall be provided with prefitted cement Guard. DB Door shall have detachable gland plates provided with proper knockout holes of 26mm/35mm diameter for intsertion of cable/conduits. Distribution Boards shall be provided with wire set of copper along with the insulated fork type bus bars.DB shall have reversible hinged doors and possibility to allow door opening from left to right or right to left for convenience on site complete all as specified and directed . |
| 79 | Supplying and fixing RCBO 4 Pole 100 Amps 7 module as incommer conforming to IEC 61009-1 with breaking capacity 10 KA and sensitivity 100 mA having overload, short circuit and earth leakage protection with earth fault indicator complete all as specified and directed. |
| 80 | Supplying & laying sub main wiring with two run of 1.5 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 1.5 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall and surface on ceiling in PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 81 | Supplying & laying sub main wiring with two run of 2.5 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 2.5 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall and surface on ceiling in PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed . Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 82 | Supplying and fixing of VTPN (including MCCB 160 Amp) distribution board 12 way fabricated out of thick high quality CRCA sheet. DBs shall be totally enclosed, suitable for 240V/415V, for indoor application .DBs shall be provided with prefitted cement Guard. DB Door shall have detachable gland plates provided with proper knockout holes of 26mm/35mm diameter for intsertion of cable/conduits.Distribution Boards shall be provided with wire set of copper along with the insulated fork type bus bars.DB shall have reversible hinged doors and possibility to allow door opening from Left to Right or Right to Left for convenience on site complete all as specified and directed . |
| 83 | Suuply and fixing of track mounted LED light of 15 watt with modern design, compact size with high power COB LED to provide focussed light complete all as specified and as directed. |
| 84 | Supply and fixing recessed mounting LED deep recessed downlights of 24 Watt with flushed diffuser IP 40 range. complete all as specified and as directed. |
| 85 | Supply and fixing of 25W Round ring shaped decorative suspended fixture of dia 600mm, Made of Aluminum extrusion heat sink for effective thermal management, sturdiness and excellent corrosion resistant fitted in white finish.complete all as specified and as directed. |
| 86 | Supply and fixing destello connector to create '+' shape pattern with seamless connectivity and suspended monting arragements of capacity 48 Watt ,complete all as specified and as directed. |
| 87 | Supply & fixing of recessed mounting LED round downlighter of 12 watt tilatable made of PDC Al with high defficient COB LED & clear diffuser IP 20 complete all as specified and as directed. |
| 88 | Supply & Fixing of recessed mounting LED round downlighter of 3 watt tilatable made of PDC Al with high defficient COB LED & clear diffuser IP 20 complete all as specified and as directed. |
| 89 | Suuply and fixing of ILLUMAX FMT (Front Mount) Model Steplight, updown throw without No plain in all areas of red cloured 1 metre in length complete all as specified and direted. |
| 90 | Supply & fixing of 12 V / 17 Amp heavy duty SMPS power supply suitable for 100 Mtrs step light complete all as specified and direted. |
| 91 | Suply and fixing wall mounted emergency lights of battery backup 02 hour Alex 4 W LED lamp light colour including adopter complete all as specified and direted. |
| 92 | Supply and fixing of LED 9w wall bracket light aesthetically designed wall bracket light in wooden housing glass and B22/E27 holder complete all as specified and direted. |
| 93 | Supply and fixing of glow sign board with acrylic sheet 3 mm thick transparent sheet lattering \\"Entry\\" on green, \\"Exit\\" on red sheet suitable size and enclosure made with 2 mm thick MS sheet painted with black synthetic enamel paint and LED tube 02 Nos inside complete all as specified and direted. |
| 94 | Supply and fixing of laser engraved seat No. plates as per direction of the Eng-in-charge. |
| 95 | Suply and fixing flexible LED strips wity optimum brighteness & uniformity of light for perfect cover lighting, IP 20 complete all as spcified and directed |
| 96 | LIGHTINING PROTECTION WORKSSupply & fixed aluminium strip of size 25x3 mm complete with saddles and base insulators (made out of porcelene/PVC) and fixing screws on roof and down side conductors complete all as per specified and directed. |
| 97 | M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in bocks to hold GI extension pipe for Air termination rod complete including necessary use and waste of form work required, all as directed. |
| 98 | FIRE ALARM AND DETECTION SYSTEMSupplying, installing, testing & commissioning of UL listed Intelligent addressable Manual Call Points resettable type/ pull station complete all as specified and directed . |
| 99 | M&L dry sand cushoning to cable i.e 8 cm before laying cable in trenches and 15 cm after laying the cable and compacting complete all as specified and as directed .Note: punned thickness shall be measured for payment. |
| 100 | Supply, Installation, Testing & Commissioning of optical thermal (Multi) detector (heat & smoke) radio-linked optical thermal detector operates both with an optical sensing chamber based on the principle of scattered light as well as with a rate of rise thermal sensor. The detector communicates with a fire detection control panel in loop technology via the loop RF interface. Two lithium batteries are accommodated in the detector base one as backup. The two coloured LED indicator with 360 visibility. Mechanical theft protection in the base. Radio transmission of 150 m (in free air), operating at de-licensed frequency range of 865MHz all as specified and directed. |
| 101 | Supply, Installation, Testing & Commissioning of analouge Addressable Wall Sounder weather proof as standard and is equipped with 3 levels of volume adjustment and 32 recognised tones which can be set locally at the sounder. When configured onto a FIREwave Translator, the Wireless Sounder is fully addressable and benefits from intelligent control, test and monitoring complete all as specified and as directed by Engr-in Charge. |
| 102 | Supply, install, test & commissioning of RF translator wireless device which can control upto 32 detectors modules or signalling devices, configuration through manual or PC software, up to 32 fully intelligent wireless field devices. Operating at frequency of 865-867 MHz. status indication via 3 LEDs, IT communicates with the control panel via the loop, radio transmission range 150m in free air, operating frequency channels 7, all as specified and directed. |
| 103 | Supply, installation, testing & Commissioning of Analouge addressable Wireless Resettable Manual Call Point, Bi Directional wireless communication Fully intelligent Utilises standard low cost lithiumbattery technology, Long battery life, Resettable Element, Clear ‘device activated’ warning flag, High reliability, automatic channel hopping self optimising wireless amplitude and frequency and fixing with suitable size of MS conduit pipe alongwith the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. Communication range with the Translator Module is up to 150 Mtrs in open Area complete all as specified and as directed by Engr-in Charge. |
| 104 | Supply, install, test & commissioning of Active Full function Repeater Panel complies with EN54-2, Network up to 64 panels/repeaters,Programmable one touch test mode,Powerful and versatile cause & effect programming,Cause & effect wizard including:Cause & effect action,Disablement configuration,Test mode configuration 5.25 amp power supply to EN54 part 4,Large graphic display,In built help and alarm information screens,Real time clock,Stylish enclosure design,Soft-touch tactile buttons,2 programmable function buttons,3 programmable front panel mounted LED’s,Improved Front loading Printer (optional)Up to 512 programmable inputs/outputs perpanel via 2 wire RS485 serial link (optional) Simple Windows® graphical configuration utility.It has IP rating IP30. |
| 105 | Supply, installation, testing and commissioning of UL listed Microprocesssor based 2 Loop analogue addressable type fire alarm control panel with 80 character LCD display four access levels 500 event historical logging upto 200 detectors all as specified. The panel will have its battery charges and 2 batteries of 7 AH. Cost of batteries and battery charger is deemed to be included in quoted cost of panel complete all as specified and directed at site by Engr in charge |
| 106 | Supply and fix Fire Alarm sounders / Sirens electronic type horizontal single stage continuous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 meter with sound output variation of + 5 DB for 1000 meter range complete all as specified and directed at site by Engr in charge |
| 107 | Supply and lay PVC insulated PVC sheathed cable galvanized steel strip or wire armoured,electric control cables (Heavy duty) with stranded Copper conductor of size 1.5 sq mm 2 core 1100 Volts grade suitable for fire survival all as specified complete all as specified and directed.Note: cost of MS clamp/Saddles placed alongwith wall/ceiling for fixing of cable shall deemed to be inclusive in quoted item rate |
| 108 | S & F Exit Sign of dimension 300 mm x130 mm x 8 mm made up of Aluminium, Acrylic LED edge light 2 Watt 230 Volt green colour with rechargable battery backup of Minimum 3 Hrs alongwith necessary fixing arrangement fixed on wall/ ceiling all as directed by Engineer-in-charge. |
| 109 | S & F powder coated GI Race Way Cable Tray of size 100 mm x 50mm x 2mm(1 Compartments) incl suitable bracket ,nut, bolt washers, fixed to wall roof etc, complete all as directed |
| 110 | EXTERNAL WATER SUPPLY WORKSM&L for Ductile Iron Pipe (DI Pipes) S/S including special Class K-7,150 mm (6\\") dia laid in trenches complete all as specified and directed. |
| 111 | M&L for Ductile Iron Pipe (DI Pipes) S/S including special Class K-7,100 mm (4\\") dia laid in trenches complete all as specified and directed. |
| 112 | Material and labour for CI/DI fittings/specials upto 200 mm dia suitable for spigot and socket end or flanged end such as bends (any type, radius and angle) tapers any type ( straight, bend, increasing, decresing ordouble socket etc.) Tee pieces single branch.\\"Y\\" junction, double branch, cross, collars, caps and plugs, connecting pieces (any type) and tesing complete all as specified and directed. |
| 113 | Supply and Fix Sluice valves Class PN 1.6, 150 mm (6\\") dia, conforming to IS-13095, fixing of GI/CI/DI water supply mains complete all as specified and directed. |
| 114 | Supply and Fix Sluice valves Class PN 1.6, 100 mm (4\\") dia, conforming to IS-13095, fixing of GI/CI/DI water supply mains complete all as specified and directed. |
| 115 | Cutting/drilling the existing Cast Iron/Ductile Iron pipes lines of 150 mm dia, in position for inserting of new Tees, branches etc complete all as specified and directed. |
| 116 | Providing, fixing, testing & commissioning of dual plate non-return valve of 100mm dia complete with nuts, bolts and washers. |
| 117 | Providing, fixing, testing & commissioning of dual plate non-return valve of 150 mm dia complete with nuts, bolts and washers. |
| 118 | M&L for construction of PCC block walling valve pit of size 1200mmx 1200mm x1200mm(internal dimension) with precast cement concrete block of PCC 1:3:6 type-C-1 using 20mm graded stone aggregate and 10 mm thick rendering in CM 1:4 on internal and exposed external surfaces with and including 40x40x6 mm mild steel angle iron frame and 3mm thick MS sheet cover thickness not less then 3mm with locking arrangement and 1 Nos of 50 mm size 4 level lock with key in duplicate including painting to steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide prime complete all as specified and directed. |
| 119 | M&L for construction of PCC block walling valve pit of size 900mmx 900mm x900mm (internal dimension) with precast cement concrete block of PCC 1:3:6 type-C-1 using 20mm graded stone aggregate and 10 mm thick rendering in CM 1:4 on internal and exposed external surfaces with and incl 40x40x6 mm mild steel angle iron frame and 3mm thick MS sheet cover thickness not less then 3mm with locking arrangement and 1 Nos, 50 mm size 4 level lock with key in duplicate of incl painting to steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide prime complete all as specified and directed. Please Enable Macros to View BoQ information |
| 120 | M&L for construction of PCC block walling valve pit of size 900mmx 900mm x900mm (internal dimension) with precast cement concrete block of PCC 1:3:6 type-C-1 using 20mm graded stone aggregate and 10 mm thick rendering in CM 1:4 on internal and exposed external surfaces with and incl 40x40x6 mm mild steel angle iron frame and 3mm thick MS sheet cover thickness not less then 3mm with locking arrangement and 1 Nos, 50 mm size 4 level lock with key in duplicate of incl painting to steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide prime complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 34 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 36 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender