Tender For Provision Of Common Toilet Facilities For Ladies And Gents At Ground Floor And Provision Of Ac Holes At Certain Smqs At Af Station Jaipur
Tender Value
3.94 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
7880
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Common Toilet Facilities For Ladies And Gents At Ground Floor And Provision Of Ac Holes At Certain Smqs At Af Station Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Brick work with sub class 'B' bricks, Straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 2 | M&L for TMT bar 10 mm dia and over cuto to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and bing with and including mild steel wire (annealed) not less than 0.9 mm dia or secring with clips complete all as specified and directed. |
| 3 | All as per item No 2 here-in-before but 5 mm dia and over up to and including 10 mm dia in stirrups spaces and binders complete all as specified and directed. |
| 4 | M&L use and waste of form work to sides and soffits floor and roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed. |
| 5 | M&L for reinforcement cement concrete M-20 using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintel over 1.5 m span complete all as specified and directed. |
| 6 | M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed. |
| 7 | M & L for preparation of newly plastered previously untreated surfaces of walls and applying three coat of white wash etc complete all as specified and directed. |
| 8 | M&L for Non skid ceramic coloured tiles, joint free, 7 to 8 mm thick (Square or Rectangular) area of each tile exc.0.11 sqm but not exc 0.18 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 9 | M&L for glazed ceramic coloured tiles, joint free, in vertical surfaces 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with over and including rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces for backing coat of tiles complete all as specified and directed. |
| 10 | M&L for 20 mm thick granite stone slab (table rubbed and polished) as on shelves/cooking plateform over and including like cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 11 | S & F solid PVC door frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm thick wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet , mitre cut at two corners and joined with two Nos of 150mm long brackets of 15mm x 15mm MS square tube. The two vertical door profiles are to be reinforced with 19mm x 19mm MS square tube of 19 gauge, EPDM rubber gasket and weather seal to be provided through out the frame. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame using PVC fasteners. Aluminum of four Nos of screws to be provided for each vertical member and miniumum of two nos of screws for each horizontal member complete as per Manufacturer’s specification and drawing and as directed. |
| 12 | S&F Factory made solid panel PVC door shutter 30mm thick (style consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as mentioned on Page 149 of SSR-2020 Part-II, complete. |
| 13 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for windows & ventilators, fixed/openable (Top hung/side hung) including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for seperately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS-733 and IS-1285, fixing with dash fasterners of required dia and size including necessary filling up the gaps at junction i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/peneling, CP brass/stainless screws all complete as per architectural drawings and the direction of Engineer-in-Charge. |
| 14 | S&F for 4.8 mm thick sheet glass, ordinary quality, exc 0.50 Sqm in each pane, glazing with beads fixed with metal panel pins complete all as specified and directed. |
| 15 | S&F stainless steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned teaks galvanised wire staples fixed all as specified |
| 16 | S&F 100 mm size type B-21 Mild steel butt hinges fixed complete all as specified and directed. |
| 17 | S&F Aluminium anodised handles each 125 mm long complete. |
| 18 | S&F Aluminium anodised barrel tower bolt 125 mm size complete. |
| 19 | S & F vitreous china wash basin white, flat back or angle back type, size 630 X 450 mm but including waste pipe,cupling etc complete , brackets, cutting for and pinning in as required complete all as specified and directed. |
| 20 | S&F vitreous china perimium /Ist quality wash down water closet of any colour (closed pattern incuding all necessary accessories like rag bolts/gel gasket, trap etc, (excluding flushing cistern & flush pipe) with PVC seat cover and making connection to flushing cistern, including 100mm dia trap etc. complete all as specified and directed. |
| 21 | S&F Pillar taps 15 mm bore fancy type, swan neck, long body, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 22 | S&F 15mm long body bib taps fancy type cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 23 | S&F 15 mm CP stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and directed. |
| 24 | S & F tubular towel rail, brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flange complete all as specified and directed. |
| 25 | S & F 600 x 450 x 5.5 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all complete ad as directed |
| 26 | S&F health faucet (ABS Body) cast copper alloy chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible SS tube and ABS wall hooks including making connections and fixed in position complete in all respect as specified and directed. |
| 27 | S&F grating 100 mm dia stainless steel (Min Wt 25 gms) complete all as specified and as directed. |
| 28 | S&F PVC connection pipe 15mm size with PTMT nuts of length 450 mm etc complete all as specified and directed. |
| 29 | M&L PVC low level flushing cistern 10 Ltr capacity white complete with inlet ball valve float , syphon assembly and dual flush button and brackets including flush PVC flush pipe 32 mm dia complete all as specified and directed. |
| 30 | S & F of 15 mm bore steel water tubing medium grade galvanisedconcealed type with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed. |
| 31 | S & F of 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed. |
| 32 | S&F Cast iron floor trap 75 mm in floor laid in tranches , with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 33 | S&F Cast iron soil, waste and vent spun pipes 75mm , in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 34 | S&F Cast iron soil, waste and vent spun pipes 100mm , in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 35 | S&F spun cast iron 100mm bore bends etc complete all as specified and directed. |
| 36 | S&F spun cast iron 75mm bore bends etc complete all as specified and directed. |
| 37 | M&L for 150 mm thick plain cement concrete type C-2, 1:3:6, using 40 mm graded stone aggregate for sub base complete all as specified and directed. |
| 38 | M&L for cutting opening through old block masonry walls, built in cement mortar for door, window and other opening, etc or cutting out defective masonry for underpinning including providing fixing and removing shoring, cleaning and stacking stone and removing surpulus to store and rubbihs off the premisses complete all as specified and directed. |
| 39 | S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including flush pipe etc complete,Urinal, bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes fixed in repairs complete all as specified and directed. |
| 40 | S&F Push tap 15mm any colour high pressure of PTMT screwed for iron pipe and fixed,suitable for urinal (Minimum weight 15mm-47gms/ 20mm- 75gms) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 41 | S&F Push tap 15mm any colour high pressure of PTMT screwed for iron pipe and fixed,suitable for urinal (Minimum weight 15mm-47gms/ 20mm- 75gms) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender