Tender For Balance Part (Wooden Furniture) Of Renewal /Replacement Of Misc Furniture Items Under Ge(East) Lucknow
Tender Value
59.21 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
13 days left
EMD
1.18 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balance Part (Wooden Furniture) Of Renewal /Replacement Of Misc Furniture Items Under Ge(East) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Part I (Wooden Furniture) |
| 2 | Table Bed Side as per this drwgFD/MAP/07 and specification as under:The overall dimensions as shown on drg. 18mm thick Prelaminated HDHMR board shall be used for fabrication of body. 12 mm thick prelaminated HDHMR board shall be used for back/bottom of drawer of Table bed side . 75 mm SS handle shall be used in drawer and cabinet. 2x (L Bihari) Hydraulic Hings SS shall be provided in cabinet. Telescopic channel shall be provided in drawer for smooth functioning. 2 mm thick PVC edging shall be fixed on edges of top/sides/cabinet dooretc and 0.8 mm thick PVC edging shall be used on sides of drawer with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. Hard nylon /PVC shoe 4 nos shall be provided to each table bed side. Table bed side shall be manufactured without pullout tray irrespective of what is shown on drg. Rest all as per drg or as directed by EIC. |
| 3 | Table Peg as per this drwgFD/MAP/11 and specification as under:All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. Brown colour glass top of 12 mm thick duly polished shall be flushed on top with silicon gel irrespective of what is shown on drg as directed by EIC. Right bracket/ connecter shall be secrewed to the each legs as directed by EIC. Hard nylon shoe / buffers shall be provided to each leg.one centre stiffner shall be provided on bottom side rail of table irrespective of what is shown on drg.All exposed wooden surfaces shall be high class glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC. |
| 4 | Table dressing (Ladies dressing mirror) including stool,as per this drwg FD/MAP-II/07 and specification as under: All wood work shall be first class hard wood, TW . Top/side/drawer/bottom/back shall be made of 16 mm thick plain HDHMR board with 1 mm thick laminate both side colour /shades shall be approved by EIC/GE. Telescopic channel shall be provided to each drawer and bottom of drawer shall be made of 9 mm thick prelaminated HDHMR board . 01 Nos Std quality magnetic catcher shall be provided to each shutters. S /S handle shall be provided to drawer / shutter as per approved sample .Heavy duty S/S Piano hinges shall be provide to each shutter .Std quality Cam lock connector/dowels fastenning /universal angle/PVC corner shall be used in fabrication of body/structure of item. PVC edging 2 mm thick shall be used to exposed surfaces parts except sides of drawer and 0.8 mm thick shall be provided on inner sides of drawer with edge bander machine as directed by Engr-in-Charge. PVC beading 2 mm thick shall be provided to alround bottom of dressing. Cushion of stool dreesing shall be minimum 40 density with tapestry . Heavy duty revolving nylon double wheels( 4 Nos) shall be used at the bottom of stool as shown on drgAll exposed wooden surfaces shall be high glossy melamine polish. Rest all as shown on drg and as directed by EIC. |
| 5 | Bin linen multi purpose as per this drwgFD/E6/MAP/09 and specification as under: Top / Sides / Shutters / Drawers / bottom / partition shall be made of 16 mm thick plain HDHMR board with 1 mm thick laminate both side colour/shade shall be approved by EIC/GE. Telescopic channelshall be provided to each drawer and bottom of drawer shall be made of 9 mm thick prelaminated HDHMR board . Std quality magnetic catcher shall be provided to each shutters. S/S handle shall be provided to shutter / drawer as per approved sample . 12mm thick prelaminated HDHMR board shall be provided on back side .4 Nos SS 202 grade legs of 4 inch height shall be provided in lieu of skirting/legs complete as directed by Engr-in-Charge. Heavy duty L bihari hudraulic hings std quality shall be provided to each shutter. Std quality Cam lock connector/dowels fastenning /universal angle/PVC corner shall be used in fabrication body/structure of item. PVC edging 2 mm thick shall be used to exposed surfaces parts except sides of drawer and 0.8 mm thick shall be provided on sides of drawer with edge bander machine as directed by Engr-in-Charge .Rest all All wooden surfaces / wood based materials shall be melamine polished with high class finish. Rest all as per drg or as directed by EIC. |
| 6 | Side Board as per this drwgFD-1112 and specification as under: Top / Sides / Shutters / Drawers / bottom / partition shall be made of 16 mm thick plain HDHMR board with 1 mm thick laminate both side colour/shade shall be approved by EIC/GE. Telescopic channel shall be provided to each drawer and bottom of drawer shall be made of 9 mm thick prelaminated HDHMR board . Std quality magnetic catcher shall be provided to each shutters. S/S handle shall be provided to shutter / drawer as per approved sample . 12mm thick prelaminated HDHMR board shall be provided on back side .4 Nos SS 202 grade legs of 4 inch height shall be provided in lieu of skirting/legs complete as directed by Engr-in-Charge. Heavy duty L Bihari hydraulic hings std quality shall be provided to each shutter. Std quality Cam lock connector/dowels fastenning /universal angle/PVC corner shall be used in fabrication body/structure of item. PVC edging 2 mm thick shall be used to exposed surfaces parts except sides of drawer and 0.8 mm thick shall be provided on sides of drawer with edge bander machine as directed by Engr-in-Charge .Rest all All wooden surfaces / wood based materials shall be melamine polished with high class finish. Rest all as per drg or as directed by EIC. |
| 7 | Sofa Set 5 seater as per this drwgFD-281 and specification as under: All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973.Cushion for seat & back shall be 100mm thick PU foam minimum 40 density coverd with good quailty, tapestry cloth . PVC shoe shall be proveded to each legs.All wooden portion shall be smoothened to apply best quality melamine polish glossy finish with spray machine. Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC |
| 8 | Sofa Set 4 seater as per this drwgFD-281 and specification as under: All wood work shall be first class HW well seasoned teakwood (MP) with permisible moisture contents as per IS-287-1973.Cushion for seat & back shall be 100mm thick PU foam minimum 40 density coverd with good quailty, tapestry cloth . PVC shoe shall be proveded to each legs. 4x single seater shall be supplied .All wooden portion shall be smoothened to apply best quality melamine polish glossy finish with spray machine. Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC. |
| 9 | Teapoy as per this drwg FD-382 and specification as under: All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. Top 16 mm thick plain HDHMR board with 1 mm thick laminate both side in colour/shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed alround with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. Right bracket/ connecter shall be secrewed to the each legs . Hard nylon shoe / buffers shall be provided to each leg. Top side rail and center stiffner shall be provided to each teapoy irrespective of what is shown on drg as directed by EIC.All exposed wooden surfaces shall be high glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC. |
| 10 | Chair dining offrs as per this drwg FD/MAP-II/04 and specification as under: Timber shall be first class teakwood , seasoned free from knots & cracks with moisture content permissible limit as per IS-281-1973. Seat shall be made out of 75mm thick PU foam 40 density pasted with adhesive on 12mm thick BWR grade plywood covered with fabric/tapestry . PVC rings shall be screwed to each legs. Fabrication of seat shall be done at BSO Yard. All wooden portion shall be smoothened to apply best quality melamine polish glossy finish with spray machine. Right angle bracket/connecter shall be provided to each legs.Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC. |
| 11 | Table centre as per this drwgFD/MAP/08 and specification as under: All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. Brown colour glass top of 12 mm thick duly polished shall be flushed on top with silicon gel irrespective of what is shown on drg as directed by EIC. Right bracket/ connecter shall be secrewed to the each legs as directed by EIC. Hard nylon shoe / buffers shall be provided to each leg.All exposed wooden surfaces shall be high class glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC. |
| 12 | Table with drawer wooden (900mmx600mmx760mm) as per this drwgFD-283 and specification as under: The overall size of table shall be of 900mmx600mmx760 mm. All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. Top 16 mm thick plain HDHMR board with 1 mm thick laminate both side colour/shade as approved by EIC/GE with 2 mm thick PVC edging of shall be fixed alround with strong bonded chemical adhesive through hot pressed machine complete .telescopic channel shall be provide in drawer for smooth functioning with std quality SS locks.Right bracket/ connecter shall be secrewed to the each legs as directed by EIC. Hard nylon shoe / buffers shall be provided to each leg.All exposed wooden surfaces shall be high class glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC. |
| 13 | Table Writing as per this drwgFD-275 and specification as under: All wood work shall be first class HW well seasoned teakwood (MP) with permisible moisture contents as per IS-287-1973. Top/cabinet/drawer shall be made of 16 mm thick plain HDHMR board with 1 mm thick laminate both side in colour/shade as approved by EIC/GE with 2 mm thick PVC edging shall be fixed alround with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. Right bracket/ connecter shall be secrewed to the each legs . Hard nylon shoe / buffers shall be provided to each leg. 0.8 mm thick PVC edging shall be used on sides of drawer and bottom of drawer/back of cabinet shall be made of 9 mm thick Prelaminated HDHMR board . Telescopic channel shall be used for smooth functioning . irrespective of what is shown on drg Magenetic catcher shall be used in place of lock in shutter. wooden recessed handle shall be provided to drawer/shutter. All exposed wooden surfaces shall be high glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC. |
| 14 | Table Dining 6 pers as per this drwgFD/MAP-II/03 and specification as under: All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. Top shall be made of 16 mm thick plain HDHMR board with 1 mm thick laminate both side in colour/shade as approved by EIC/GE with 2 mm thick PVC edging fixed alround with strong bonded chemical adhesive through hot pressed machine complete . Hard nylon shoe / buffers shall be provided to each leg. what is shown on drg the top shall be fixed on top of table. All exposed wooden surfaces shall be high glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC. |
| 15 | Table Dining 4 pers as per this drwgFD/MAP-II/03 and specification as under: All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. Top shall be made of 16 mm thick plain HDHMR board with 1 mm thick laminate both side in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of fixed alround with strong bonded chemical adhesive through hot pressed machine complete . Hard nylon shoe / buffers shall be provided to each leg. what is shown on drg the top shall be fixed on top of table. All exposed wooden surfaces shall be high glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC. |
| 16 | Table Dressing Gents as per this drwgFD-230 and specification as under: All wood work shall be first class hard wood, TW . Top/side/drawer/bottom/back shall be made of 16 mm thick plywood BWP grade with 1 mm thick laminate both side colour /shades shall be approved by EIC/GE. Telescopic channel shall be provided to each drawer and bottom of drawer shall be made of 9 mm thick BWR ply with 1 mm thick laminate . 12 mm thick plywood with both side laminate shall be used in back of table dressing box . S /S handle shall be provided to drawer as per sample kept in BSO yard.Std quality Cam lock connector/dowels fastenning /universal angle/PVC corner shall be used in fabrication of body/structure of item. PVC edging 2 mm thick shall be used to exposed surfaces parts except sides of drawer and 0.8 mm thick pvc eadging shall be provided on inner sides of drawer with edge bander machine as directed by Engr-in-Charge. All exposed wooden surfaces shall be high glossy melamine polish. 5 mm thick mirror shall be used . Fixing of table dressing shall be done by the contractor . Rest all as shown on drg and as directed by EIC. |
| 17 | Part II (Steel Furniture) |
| 18 | Almirah med steel , as per this drwg FD-1032 and specification as under:-The overall size shall be of 1270mm x 765 mm x 440mm made of CRCA sheet. The body, legs & shelves shall be made of 1mm thick CRCA sheet . Welding process shall be of MIG or MAG. Locking arrangements shall be provided with duplicate keys. irrespective of what is shown on drg Steel cabinet lock Cum Handle(maruti lock) shall be provided in shutters. 04 Nos adjustable shoe shall be provided . All steel surfaces ext/internal shall be powder coated of approved shade preparation of steel surfaces. Contrast colour shall be used for painting and colour shall be approved by GE/EIC . All joints (gaps) shall be filled with metal putty/primer before powder coating. Rest all as per drg or as directed by EIC |
| 19 | Locker Bed side steel, as per this drwg FD-1029 and specification as under:-All dimensions shall be of as shown on drg. The body, legs & shelves etc shall be made of 1mm thick CRCA steel sheet . Welding process shall be of MIG or MAG. Locking arrangements shall be provided as per FD-1032 irrespective of what is shown on the drg . Stainless steel Locks shall be provided . Standard quality Handles shall be of non-ferrous metal alloy with CP Godrej pattern as per sample . Adjustable shoe shall be provided to each legs as per godrej pattern. All steel Ext surface shall be hammertone painting of approved shade over a coat of red oxide primer after preparation of steel surfaces. Contrast colour shall be used for painting and colour shall be approved by GE/EIC. All joints (gaps) shall be filled with putty/primer before painting. Rest all as per drg and as directed by EIC. |
| 20 | Almirah large steel 1/2Hx1/2Shelves , as per this drwg FD-1033 and specification as under:-The overall size shall be of 920mm(W) x 485mm(D) x 1985mm(H) made of CRCA sheet. The body, legs & shelves shall be made of 1mm thick CRCA sheet . Welding process shall be of MIG or MAG. Locking arrangements shall be provided with duplicate keys. Steel cabinet lock Cum Handle(maruti lock) shall be provided in shutters irrespective of what is shown on drg. 04 Nos adjustable shoe shall be provided. All steel surfaces ext/internal shall be powder coated. Contrast colour powder coating shall be used for painting and colour shall be approved by GE/EIC. All joints (gaps) shall be filled with putty/primer before powder coating. Rest all as existing trade pattern/Drg or as directed by EIC. |
| 21 | Part III (Branded / TP Furniture) |
| 22 | Receptacle PVC(dustbin) , as per this drwg FD/E6/MAP/13/TP and specification as under:-All PVC work shall be of standard class thick polymer plastic. pedestal type receptacle with capacity not less than 20 ltrs shall be supplied |
| 23 | Chair writing , as per this drwg FD/E6/MAP-II/12/TP and specification as under:-The overall size of chairs shall be of 820mm Hx450mm Wx450mm D . 12 mm thick hot pressed plywood shall be used in seat and back.arm rest shall be made of PU. Seat and back shall be made of PU foam 50 mm thick with 50 density and fabric not less than Rs 300 per meter.frame shall be made of 25 mm MS Round pipe 16 guage thick with black powder coated . Rest all as per sample or as directed by EIC. Sample of chairs shall be approved by EIC/GE before supply or as per sample held with BSO. |
| 24 | Bed Hard Steel , as per this drwg FD/E6/MAP/08(R) and specification as under:-The complete frame work shall be made of CRCA box section with 18 guage thick as per IS-4923. Bed top shall be 12mm thick BWP grade plywood and shall be fitted with shunken nuts/bolts and washer as directed by EIC. The foot board / head board shall be covered with 18mm thick prelamintated HDHMR board ext grade BSD with 0.8 mm thick PVC edging with edge bander machine, colour of board shall be approved by GE/EIC. Head rest and foot rest shall be detacheable. All metal work shall be powder coated , colour shall be approved by GE/EIC. All joints / gaps shall be filled with metal putty / primer before powder coating. Welding process shall be of MIG or MAG and complete . irrespective of what is shown on drg ,bottom framing work of foot rest shall be of 18 mm CRCA box section with 18 Guage thick shall be used. Inner hard rubber shoe shall be provided to each legs. Rest all as per drg and as directed by EIC. |
| 25 | Table office Clk, TP and specification as under:-overall size of table shall be of 1200mmx600mmx750 mm.Top shall be made of 25 mm thick PLPB with 3x Drawer pedestal unit movable with central locking device and with telescopic channel in pedestal . MS Frame shall be made of 60mmx30mmx1.6 mm thick . Metal understructure with perforated modesty thickness 0.8 mm .complete frame shall be powder coated complete . |
| 26 | Table office officer , TP and specification as under:-overall size of table shall be of 1650mmx1650mmx750 mm.Top shall be made of 25 mm thick PLPB with 3x Drawer pedestal unit movable with central locking device and with telescopic channel in pedestal . Table with side unit storage made with 18 mm thick PLPB with central locknig in drawers with telescopic channel .MS Frame shall be made of 60mmx30mmx1.6 mm thick . Metal understructure with perforated modesty thickness 0.8 mm .complete frame shall be powder coated complete . |
| 27 | Table Computer ,TP and specification as under:-overall size of table shall be of 1100mmx550mmx750 mm.Top shall be made of 17 mm thick PLPB with 1x Drawer with locking device and with telescopic channel with key board tray hanging shelf .All MS Frame shall be shall be powder coated complete . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender