Tender For Repair And Replacement Of Gi/Ci/Di Pipe Line And Day To Day Maintenance Of External Water Supply And Allied Work At Pcda (Nc) Jammu Under Ge (Af) Jammu
Tender Value
14.41 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
19 days left
EMD
29000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Replacement Of Gi/Ci/Di Pipe Line And Day To Day Maintenance Of External Water Supply And Allied Work At Pcda (Nc) Jammu Under Ge (Af) Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing and testing CI sluice valves, 150 mm dia, both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostatic pressure 15 Kg/Sqcm. (PN 1.6) and confirming to IS 780, including taking out of existing unserviceable valve complete all as specified and directed by Engineer-in-Charge. |
| 2 | Supply and fixing and testing CI sluice valves, 100 mm dia, both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostatic pressure 15 Kg/Sqcm. (PN 1.6) and confirming to IS 780, including taking out of existing unserviceable valve complete all as specified and directed by Engineer-in-Charge. |
| 3 | S&F cast iron non return valve heavy duty ISI marked, 150 mm bore, with jointing material flanged joint rubber gasket 6mm thick nuts,MS nuts,bolts,washers including taking out of existing unserviceable complete all as specified and directed by Engineer-in-Charge. |
| 4 | Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge. |
| 5 | Returning, filling in, including spreading, leveling, watering and well ramming in layer not exceeding 25 cms thick after laying and testing of cable complete all as specified and directed by Engineer-in-Charge. |
| 6 | Removing excavated soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above starting point complete all as specified and directed by Engineer-in-Charge. |
| 7 | S&F for 15 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge. |
| 8 | Supply , laying, 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge. |
| 9 | Supply , laying, 25 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge. |
| 10 | Supply , laying, 40 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge. |
| 11 | Supply , laying, 50 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge. |
| 12 | Supply , laying, 80 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge. |
| 13 | Supply , laying, 100 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge. |
| 14 | Note for 07.00 to 13.00: Excavation and earth work shall be measured and paid seperately under relevant items |
| 15 | Supply , laying, jointing & testing of DI Type K-7 pipe, 100mm dia, with socket & spigot ends, with cement morter zinc coated out side as per IS 8329/2000 in standard length suitable for and including push on tyton joints with rubber rings, laid in trenches, including taking up or down old unserviceable water mains (including all fittings), of any type including burning out joints incliding turning water OFF or ON as necessary and taking off and refixing covers, access doors etc.complete all as specified and directed by Engr in charge. |
| 16 | Supply , laying, jointing & testing of DI Type K-7 pipe, 150mm dia, with socket & spigot ends, with cement morter zinc coated out side as per IS 8329/2000 in standard length suitable for and including push on tyton joints with rubber rings, laid in trenches, including taking up or down old unserviceable water mains (including all fittings), of any type including burning out joints incliding turning water OFF or ON as necessary and taking off and refixing covers, access doors etc.complete all as specified and directed by Engr in charge. |
| 17 | Note for 15.00 to 16.00: DI/CI specials, excavation and earth work shall be measured and paid seperately undder relevant items |
| 18 | Attending day to day emergency breakdowns / complaints of damaged water supply lines of 15 to 25mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled /semi skilled man power for smooth functioning of water supply, complete all as specified and directed by Engineer-in-Charge. |
| 19 | Attending day to day emergency breakdowns / complaints of damaged water supply lines of 40mm to 50mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled /semi skilled man power for smooth functioning of water supply, complete all as specified and directed by Engineer-in-Charge. |
| 20 | Attending day to day emergency breakdowns / complaints of damaged water supply lines of 80mm to 100mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled /semi skilled man power for smooth functioning of water supply, complete all as specified and directed by Engineer-in-Charge. |
| 21 | Attending day to day emergency breakdowns / complaints of damaged water supply lines of more than 100mm to 150mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled /semi skilled man power for smooth functioning of water supply, complete all as specified and directed by Engineer-in-Charge. |
| 22 | Note for serial item No 18.00 to 21.00 : - (a) Up to 0.50 Cum of the earth work shall be included in the job & more than 0.50 Cum shall be measured and paid separately.(b) The complaint / breakdown shall be rectified by the contractor within 24 Hours. Any delay thereafter, recovery at double the rate quoted per job shall be deducted from the dues of contractor by the Enginer-in-charge without any notice.(c) A proper record of complaint slip shall be maintained by the Engineer-in-Charge for making the payment against these items and recovery if any in case of failure of attending and rectifying the complaint within 24 hours.(d) Two pipe fitter and two helper with required T&P shall always be made available for attending complaints.(e) All material such as bends,unions,nipple,tees,sockets and all other items rate includes each job.MES not given any material and not paid seperately |
| 23 | M&L for MS/CI/DI fittings such as collar, bends, any type, any dia, any radius, any angle, double end socketted or double flanged or spigot & socket, tail pieces, all socketed or all flanged with an equal & other end tapering bellmouth or flanged plates, connecting pieces straight, both end flanged or socketed of socket & flanged & spigot ends or bellmouth tailpieces, one end flanged & other end spigot or socket or tatering as bell mouth or flanged, caps blank flanges heavy duty suitable for mechanical joint/flanged joint with and including taking down old fitting of any type and any size all as specified & directed by Engineer In ChargeNote: Certifiacte for Weight of fitting by the manufacturere shall be submitted before payment. |
| 24 | M&L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 80 mm bore dia of CI/DI pipe complete all as specified and directed by Engineer-in-Charge. |
| 25 | M&L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 100 mm bore dia of CI/DI pipe complete all as specified and directed by Engineer-in-Charge. |
| 26 | M&L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 150 mm bore dia of CI/DI pipe complete all as specified and directed by Engineer-in-Charge. |
| 27 | M&L Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 20mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge |
| 28 | M&L Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 25mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge |
| 29 | M&L Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 40mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge |
| 30 | M&L Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 50mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge |
| 31 | M&L Bib taps , fancy type cast copper alloy, chromium plated, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule for bore of pipe 15 mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge |
| 32 | S&F cast iron non return valve heavy duty ISI marked, 100 mm bore, with jointing material flanged joint rubber gasket 6mm thick nuts,MS nuts,bolts,washers including taking out of existing unserviceable complete all as specified and directed by Engineer-in-Charge. |
| 33 | M&L for carry out water quality anyalsis for bacterial , chemical and biological analysis including for collection of water samples from the pump house or form location as specified by Engineer-in-charge and testing from Govt approved testing laboratory , submitting of report from minium following parameters. (a) Free chlorine (b) pH (c ) Total Hardness (d) Total Alkalinity (e) Bacterological standards (f)Chemica standars (g) physical standards (h) copper (i) chloride of Govt testing lab. Notes: 1. Saperate water samples should be collected & tested for Each location as specified above 2. No payment shall be made to contractor till submission of water test report for the water samples of loactions mentioned above |
| 34 | M&L for cleaning of valve pit chamber removing sludge deposited inside chabers,removing sliuce valve changing packing rope and also spindle,clearing of all leakages from chamber complete all as specified and directed by Engineer In Charge |
| 35 | Supply only Altoc GP Calcium Based granular Disinfectant (Aqua Fit) for Water Treatment Packing 45Kgs Plastic drum. |
| 36 | Cleaning the overhead reservoir cap 50000 gallons to 1.0 lakh gallons (twin or single chamber) by draining the complete water and brushing the surface with iron brush and removing the complete mud/ silt and and washing the complete inner surface of the tank to the entire satisfaction and srounding areas cleaning of Engineer in Charge and writing the date of cleaning on surface of tank with white synthetic enamelled paint on black background complete all as specified and directed by Engineer-in-Charge.Note:T&P, material, labour involved in cleaning shall be arranged by the contractor without any extra cost to the department. |
| 37 | M&L for removing bore well column pipes upto 150 mm dia with submersible flat cable of any type and dismantling and taking up/down Submersible Pump and Motor assembly of capacity 20 HP, shifting to workshop and removing unserviceable spares, replacing with new spares such impeller, bushes distance bush, seal etc of same specifications / type / model. removing burnt copper winding from motor and rewinding with same guage and type of insulation copper conductor winding wires and insulation sheets , applying insulating varnish over the complete winding , drying up by heating , assembling back and testing for proper function including necessary machining works as required , bringing back and reinstalling into the bore well complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 38 | M&L for removing bore well column pipes upto 150 mm dia with submersible flat cable of any type and dismantling and taking up/down Submersible Pump and Motor assembly of capacity 20 HP, shifting to workshop and removing unserviceable spares, replacing with new spares such impeller, bushes distance bush, seal etc of same specifications / type / model. removing burnt copper winding from motor and rewinding with same guage and type of insulation copper conductor winding wires and insulation sheets , applying insulating varnish over the complete winding , drying up by heating , assembling back and testing for proper function including necessary machining works as required , bringing back and reinstalling into the bore well complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender