Tender For Repair To Joinery,Tiles ,Extrenal Wall,Plaster, Chajjas ,Sanitary Fittings ,Rain Water Pipes And Repairs To Sunken Floors Including Leakage/Seepage At Certain Buildings In Officers Married Accommodation At Vayusena Nagar Nagpur
Tender Value
15 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
8 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery,Tiles ,Extrenal Wall,Plaster, Chajjas ,Sanitary Fittings ,Rain Water Pipes And Repairs To Sunken Floors Including Leakage/Seepage At Certain Buildings In Officers Married Accommodation At Vayusena Nagar Nagpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5 sqm each but not exceeding 4 sqm complete all as specified and as directed. |
| 2 | Taking down of chowkat with shutter (without taking off shutters from the frame), not exceeding 1.5 sqm each complete all as specified and as directed. |
| 3 | Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each complete all as specified and as directed. |
| 4 | Dismatling of cupboard partition of any description fixed in any position with nail complete all as specified and as directed. |
| 5 | Supply and Fixing ply wood BWR type BB 18/19mm thick (PLY) ISI marked fixed with screw to timber frame work fixed in repair complete all as specified and as directed. |
| 6 | Supply and Fixing ply wood BWR type BB 12mm thick (PLY) ISI marked fixed with screw to timber frame work fixed in repair complete all as specified and as directed. |
| 7 | Supply and Fixing 2nd class HW plain solid straight chowkhat and frame framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 8 | Supply and Fixing 30mm thick flush door shutter solid core construction with block board case and plywood face panels commercial type on both sides all as approved by GE complete complete all as specified and as directed. |
| 9 | Supply and Fixing Factory made solid panel PVC door wired gauzed shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panneling of stainless steel wire cloth i.e. panel will be of wire gauze in lieu of PVC sheet panel . The wire gauze shall be wrapped on an additional square 8 mm M.S. Solid tube and this tube shall be welded to MS tubes The wire gauze shall be stretched to tighten firmly complete all as specified and as directed. |
| 10 | Supply and Fixing solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel squartube with single side prelam PVC sheet used instead of plain colour PVC sheet and edge will be painted to match with prelam sheet and fixed in position as per manufacturers instruction complete all as specified and as directed. |
| 11 | Supply and Fixing Factory made solid PVC moulded door shutter 30 mm thick (Stiles) consisting of frame made out of M. S. tubes for top and bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solventcement for stiles and plain colour PVC sheet for top rail, lock rail& bottom railon either side & as gap insert for top rail & bottom rail . Panneling of plain colour PVC shet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing inthe fram at site as per specification & drawing complete all as specified and as directed. |
| 12 | Supply and Fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 13 | Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead complete all as specified and as directed. |
| 14 | Supply and Fixing sheet glass ordinary quality 5.5mm thick with oil putty not exceeding 0.5 sqm in each pane complete all as specified and as directed. |
| 15 | All as per item No 14 above but pin head type complete all as specified and as directed. |
| 16 | Supply and Fixing butt hinge, medium weight ,cold rolled mild steel 100mm long complete all as specified and as directed. |
| 17 | All as per item No 16 above but 75mm long . |
| 18 | Supply and Fixing aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed complete all as specified and as directed. |
| 19 | Supply and Fixing floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm complete all as specified and as directed. |
| 20 | Supply and Fixing aluminium anodised barred tower bolt of extruded section 150 mm long and fixed complete all as specified and as directed. |
| 21 | Supply and Fixing extruded aluminium alloy handle fabricated type anodised 150 mm long complete all as specified and as directed. |
| 22 | All as per item No 21 but 100mm long complete all as specified and as directed. |
| 23 | Material and Labour for preparing new surfaces of wood of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 24 | Material and Labour for welding in repairs to broken hinges of doors and windows to metal frame complete all as specified and as directed. |
| 25 | Supply and Fixing in repairs mild steel handle to existing steel windows left or right (as per existing pattern) complete all as specified and as directed. |
| 26 | Material and Labour for welding in repairs n exc 2.5cm in length n exc 6mm thick complete all as specified and as directed. |
| 27 | Supply and Fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions/two or three track) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all as per architectural drawings complete all as specified and as directed. |
| 28 | Supply only 12mm thick, (consting of 5 Nos of Ply), plywood BWR, type BB. complete all as specified and as directed. |
| 29 | Supply only18mm thick, (consting of 5 Nos of Ply), plywood BWR, type BB. complete all as specified and as directed. |
| 30 | Supply and Fixing aluminium louvered type ventilator with frosted glass and all fittings, closing and opening type complete all as specified and as directed. |
| 31 | Supply and Fixing mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 32 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 33 | Supply and Fixing of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed. |
| 34 | Dismantling asbestos cement, galvalume, fiber sheet (Plain, corrugated , semicorrugated, etc.) sheet in roof covering complete all as specified and as directed. |
| 35 | Supply and Fixing Pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed. |
| 36 | Supply and Fixing Pre painted GalvaIume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge of roof covering fixed with self tapping screws etc complete all as specified and directed. |
| 37 | Supply and Fixing 2mm thick fibre glass reinforced translucent corrugated sheet with two corrugation sheet with two corrugation side laps fixed with L-type or J-type or cranked hook bolts all as specified and as directed, including taking down old sheet complete all as specified and as directed. |
| 38 | Supply and Fixing Door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one complete all as specified and as directed. |
| 39 | Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty Including taking down old floof spring hydraulically complete all as specified and as directed. |
| 40 | Supply and Fixing 5mm PVC rubber sheet for doors complete all as specified and as directed |
| 41 | Supply and Fixing in repair to 9 feet pully operated cloth drying system aluminium anodised 20mm dia pipes,channels assembly ,locking system to hide rope knot, rope 4 mm dia HDPE double core and fitting materials etc. complete all as specified and directed. Make:- Easy dry or other equivalent make as approved by GE. |
| 42 | Supply and fix SS 202 steel grade 5mm wire Thali basket (17x20x8) inch complete all as specified & directed . Make: Godrej Interio/ Hettich/ Sleek Kitchens or equivalent as approved by GE |
| 43 | Supply and fix SS 202 steel grade 5mm wire Cup- saucer basket(17x20x4) inch complete all as specified & directed. Make: Godrej Interio/ Hettich/ Sleek Kitchens or equivalent as approved by GE |
| 44 | Supply and fix SS 202 steel grade Plain utility (17x20x4) inch complete all as specified & directed .Make: Godrej Interio/ Hettich/ Sleek Kitchens or equivalent as approved by GE |
| 45 | Supply and fix SS 202 steel grade 5mm wire plain utility(17x20x8) inch complete all as specified & directed .Make: Godrej Interio/ Hettich/ Sleek Kitchens or equivalent as approved by GE |
| 46 | Supply and fix SS 202 steel grade 5mm wire cutlary basket(17x20x4) inch complete all as specified & directed .Make: Godrej Interio/ Hettich/ Sleek Kitchens or equivalent as approved by GE |
| 47 | Supply and fix SS 202 steel grade 5mm thick wire Dustbin holder( 9x12 ) inch complete all as specified & directed .Make: Godrej Interio/ Hettich/ Sleek Kitchens or equivalent as approved by GE |
| 48 | Supply and fix Teliscopic channels 500mm regular complete all as specified & directed . |
| 49 | Supply and fix Nickel and cromium plated auto close hinges regular complete all as specified & directed . |
| 50 | Supply and fix shutter in 18 mm waterproof marin ply with both lamanation one side white and other side of specified colour as directed with edge binding complete all as specified & directed. |
| 51 | Supply and fix decorative handles complete all as specified & directed. |
| 52 | Supply and fix 20 G steel hollow section welded frame with powder coated (white colour) of various section for base frame complete all as specified & directed. |
| 53 | Supply and fix asbestos Cement sheet 12mm thick for loose (panel) complete all as specified & directed. |
| 54 | Material and labour for Granite of 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and mouldidng/rounding the edge complete all as specified and directed. |
| 55 | Dismantiling of existing kitchen (Including cooking platform, pedestals & boarding with frame complete all as specified and directed. |
| 56 | Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed . |
| 57 | Material and Labour for rendering 15 mm thick in CM 1:4 over brick or concrete surfaces, finished even and smooth using water proofing compound @ 3% by weight of cement complete all as specified & directed . |
| 58 | Material and Labour prepration of new plaster surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed. |
| 59 | Supply only integral water proofing compound complete all as specified & directed . |
| 60 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thick (below or above ground level) including floor finishes complete all as specified & directed . |
| 61 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thick (other than ground floor) including floor finishes and disposal of debirs complete all as specified & directed . |
| 62 | Dismantling floor, hearth or wall tiling including cement mortar bedding and disposal of rubbish off the premises complete all as specified & directed . |
| 63 | Material and Labour for P.C.C. (1:2:4) type B-0 using 12.5 mm size graded stone aggregate with using WPC as in sunken portion complete all as specified & directed . |
| 64 | Material and Labour for Water proofing treatment of sunken portion of toilet,cement mix with mastercrete M-81 in the ratio of 2:1 two parts of cements and one part of mastercrete M-81 and applied in two coats @ 0.75 kg/sqm per coat complete all as specified & directed .Make: Choksey Chemicals or Equivalent |
| 65 | Material and Labour for P.C.C. 1:5:10 type E2 using 40 mm size graded brick stone aggregate as in sunken portion complete all as specified & directed . |
| 66 | Material and Labour providing PCC 1:2:4, type B1 (using 20 mm graded aggregate), 40 mm thick, finishing cement concrete surfaces fair and even complete all as specified & directed . |
| 67 | Material and Labour providing PCC 1:2:4, B-0, 1:2:4(12.5mm graded aggregate), 25 mm thick, finishing cement concrete surfaces fair and even complete all as specified & directed . |
| 68 | Material and Labour providing screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified & directed . |
| 69 | Material and Labour for 10 mm thick in CM 1:3 screed bed or bedding layer of mortar for laying wall tiles or vertical surfaces (skirting/ dado etc) complete all as specified & directed . |
| 70 | Supply and Fixing vitrified ceramic tiles 10mm thick (square/rectangular) polished Light shade , area of each tiles not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & directed . |
| 71 | Material and Labour for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified & directed . |
| 72 | Material and Labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & directed . |
| 73 | Supply and Fixing in repair Bib tap 15mm bore fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed. Make : Prayag/ Jaquar/ Silvershine/ Sparsh Pearl/ Coronet/ Shakti |
| 74 | Fixing in repair of Fancy type Bib taps, CP cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15 mm bore complete all as specified and directed. |
| 75 | Supply and Fixing in repair Pillar tap brass CP fancy type 15mm with capston heads , screwed down high pressure for wash hand basin complete all as specified & directed . Make : Prayag/ Jaquar/ Silvershine/ Sparsh Pearl/ Coronet/ Shakti |
| 76 | Fixing in repair Pillar taps, cast copper alloy,fancy type capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified & directed . |
| 77 | Supply and Fixing in repair Brass chromium plated shower rose 125 mm size complete all as specified & directed . |
| 78 | Fixing in repairs Chromium plated shower roses with or without swivel joints,any size, including fixing to steel pipeor union complete all as specified & directed . |
| 79 | Fixin in repair Brass chromium plated Towel Rail D Type 60 cm long between flanges complete all as specified & directed . |
| 80 | Supply and Fixing in repair Brass chromium plated Towel Rail D Type 60 cm long between flanges all as specified and as directed. |
| 81 | Fixing in repair Brass chromium plated Towel Rail D Type 60 cm long between flanges all as specified and as directed. |
| 82 | Supply and Fixing, in repair Vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling , PTMT bottle trap, pvc supply pipe 15mm from stop valve etc complete all as specified & as directed. |
| 83 | Supply and Fixing in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, slim body low level, white, with inlet, ball valve, float and handle including removal of old one complete all as specified & directed .Make : Prayag, Jaquar, Silvershine, Sparsh Pearl, Coronet |
| 84 | Fixing only low level flushing cistern, moulded from virgin poly propylene complete all as specified & directed . |
| 85 | Supply and Fixing in repair vitreous china wash down water closet, pedastal pattern (EWC) white with 'P' or 'S' trap, fixing bolts and PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hanging device complete making good to floor complete all as specified & directed. |
| 86 | Supply and Fixing in repair PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including taking down old one complete all as specified & directed . |
| 87 | Fixing only plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hanging device complete all as specified & directed . |
| 88 | Supply and Fixing in repair of decorative type curtain rod with fixing brackets, stops, rollers etc. complete all as specified & directed . |
| 89 | Supply and Fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed . |
| 90 | Fixing only health faucet fixing in pipe etc. complete all as specified & directed . |
| 91 | Supply and Fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified & directed . |
| 92 | Supply and Fixing 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed . |
| 93 | Supply and Fixing in repair Brass chromium plated tumbler holder complete all as specified & directed . |
| 94 | Fixing only in repair Brass chromium plated tumbler holder complete all as specified & directed . |
| 95 | Supply and Fixing in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed . |
| 96 | Supply and Fixing in repair vitreous china squatting pan \\"orissa\\" pattern size 580 x440 mm white with integral foot rests complete all as specified & directed . |
| 97 | Supply and Fixing in repair 15mm dia 2 way Bib cock cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe complete all as specified & directed . |
| 98 | Supply and Fixing in repair 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified & directed . |
| 99 | Supply and Fixing in repair PVC mirror cabinet of size 350x450mm including taking down old inbuilt cabinet complete all as specified & directed .Make: PRAYAG PODUCT CODE NO. 551, COMMANDER or equivalent in Coronet/ Silvershine |
| 100 | Fixing only bathroom mirror cabinet complete all as specified & directed . |
| 101 | Supply and Fixing in repair 15 mm dia Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for unions and fixed complete all as specified & directed . |
| 102 | Fixing only15 mm dia Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for unions and fixed complete all as specified & directed . |
| 103 | Supply and Fixing in repair vitreous china wash down water wall hung commode suit with flushing cisten, fixing bolts and PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete making good to floor complete all as specified & directed . |
| 104 | Supply and Fixing sprindel for wall mixer/tap complete all as specified & directed . |
| 105 | Supply and Fixing syphon kit for PVC valveless, syphonic action type, flushing cistern complete all as specified & directed . |
| 106 | Supply and Fixing in repair PVC (SWR) pipes single socketed, 110 mm dia in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed . |
| 107 | Alll as per item No 106 above but 75mm dia. |
| 108 | Supply and Fixing in repair PVC (SWR) bends any radius 110mm bore complete all as specified & directed . |
| 109 | Alll as per item No 106 above but 75mm bore |
| 110 | Supply and Fixing in repair PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement complete all as specified & directed . |
| 111 | Supply and Fixing in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed . |
| 112 | Supply and Fixing in repair PVC connection 15 mm size with PTMT nuts of length 450 mm including taking down old one complete all as specified & directed . |
| 113 | Supply and Fixing in repair 32mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm Square laid in trenches including taking down old one complete all as specified & directed . |
| 114 | Material and Labour for repairs to ends of chajja by removing the old loose concrete material, cleaning the reinforcement and finishing the surface apply epoxy base resin of manufacturer pidicrete and choksey and make good with concrete 1:1.5:3 as required to existing broken surface and fair and even in cement mortar 1:3 with epoxy coating and applying two coats of weather proof emulsion paint upto 600mm depth and 100 mm thickness including necessary scaffolding as required at site etc complete all as specified & directed . |
| 115 | Taking down carefully existing plaster including concrete/brick coba /tiling/bitumen from the roof and roughening the surface ,wire brushing , cleaning and washing with water etc. , and removing the rubbish to a distance exceeding 1.5km outside the VSN and depositing complete all as specified & directed . |
| 116 | Construction Joints & Cracks treatment: Open the construction joints in the top form V shape groove with approx. 25 mm x 25 mm size. Thereafter apply in-depth waterproofing as a slurry application SmartCare of Asian or equivalent in Berger / Nerolac/ Fosroc Repair polymer mix with cement (mixing ratio of 1:1).Seal the groove with prepared in SmartCare Repair Mortar. (1:4) and polymer of 10% of weight of cement. (If required grout the joints through PVC injection nozzles fixed @ 1 M c/c, using cement slurry grout with CBX100 or equivalent in Silka/ STP added @ 250 gm per bag of cement to full saturation etc.) complete all as specified & directed . |
| 117 | Screed for Slope correction :-Providing and laying controlled Fibre Reinforced Screed Concrete of M20 grade at all levels and heights specified below using pozzolana Portland cement of grade 53 from approved manufacturer, fine aggregate, 12mm and down size coarse aggregates, necessary shrinkage compensating admixtures approved by Consultants including all leads and lifts, pumping using line pump or boom placer, vibrating/ compaction, scaffolding wherever necessary, curing as directed at all heights and depths as instructed. The concrete shall be laid and the control joints shall be provided for every 16 sqm and all the joints shall be treated with weather resistant elastomeric Hybrid PU sealants to groove with size of 1/3rd of thickness of protection concrete and cured properly. M20 grade with required finish at the top for medium traffic density with a minimum thickness of 50 mm at drain points and a slope of 1:100. (Groove cutting, sealant filling and fibres are mesured under seperate item if required). complete all as specified & directed . |
| 118 | Providing and applying the surface with Acrylic primer: Asian Paints SC Infinia Primer or equivalent in with a minimum consumption of 0.10-0.15 Kg/Sqm, followed by application of best in class, PUD based, fleece reinforced, weatherproof and waterproofing coating for UV exposed terace surfaces Asian Paints SmartCare or Berger / Nerolac/ Fosroc with consumption of 1.8 kg/Sqm in 3 coats to achieve DFT of 1±0.1 mm. A 50 GSM non-woven needle punched fleece to be embedded during the application of 2nd coat. The cured membrane with reinforced fleece should have the below properties:> Surface Temperature Reduction by Temperature resistance Test : Upto 10 Degrees as per ASTM D4803> Elongation at break >70% as per ASTM D 2370> Tensile strength > 3.5Mpa as per ASTM D 2370 > Crack Bridging Ability> 6 mm as per AS NZ 4548 > Puncture Resistance - > 200 N as per ASTM E 154> Pull-off Adhesion Strength to Concrete >1.5 MPa as per ASTM D7234> Solar Reflective Index > 100 as per ASTM E 1980> Passes Resistance to Dynamic Indentation 5.9 Joules Impact/10 mm Dia @25 deg Celsius as per EOTA: TR-006> Passes Resistance to Static Indentation 200 N Load/ 10 mm Dia. Indentor @25 deg Celsius as per EOTA:TR-007> Passes Resistance to Fatigue Movement Test @ -5 deg Celsius/ 1000 cycles as per EOTA: TR-008> Resistance to low temperature by Dyanmic Indentor @ 0 deg Celsius, 5.9 Joules Impact/10 mm dia. indentor as per EOTA:TR-006> Resistance to heat ageing @80 deg Celsius/200 days. Post 200 days the values of membrane performance for dynamic & static indentation tests, tensile strength & elongation values should not exhibit a change of more than 10%> No blistering observed on visual inspection subject to resistance to waterageing test @60 deg Celsius for 180 days> No chalking or flaking observed on exposure to aritificial weathering test in ATLAS Xenon arc reactor for 4200 hrs. The values of membrane performance for tensile strength, elongation at break & crack bridging ability values should not exhibit a change of more than 10% |
| 119 | Supply and Fixing 40mm dia Bore Packing: (Quantity shall be as per service consultant requirement)Cleaning the surface area to ensure that it is free from oil, grease, dirt and contaminants, all loose materials to be removed and roughen the pipe with wire brush. Apply bonding agent either epoxy resin over roughened pipe and then sprinkled sand over applied epoxy coating when it is green, this is for better adhesion between the pipe and concrete packing. Cost to include packing the gap using water stop tapes, sealing rings and plugs,filling the bore with Non-shrink Smartcare Genral Purpose Grout, sealing the outlet felxible pipe drain collar and application of addition coat of elastomeric PU Magnum coating alround the coller over pipe and concrete surface etc. complete Rate to include finishing the underside of the bore , pond testing and making the surface good to receive further treatment etc., for following diameters of penetration sizes.Note : Bore packing coming under waterproofing areas are included as part of the waterproofing system same is not measured separately. complete all as specified & directed . |
| 120 | Disconnecting existing PVC water tanks of capacity exc 250 litres & n. exc 500 litres setting aside (or lowering) for repair work and hoisting , reconnecting, refixng in the same position complete all as specified and as directed. |
| 121 | All as per item No 120 above but exc 500 litres & n. exc 1000 litres |
| 122 | Dismantling existing PVC water tanks of capacity exc 500 litres & n.exc 1000 litres all as directed and removed from site complete all as specified & directed .NOTE:- Dismantled water tank shall become the contractors property as per Sch of credit. |
| 123 | All as per item No 122 above but r tanks of capacity exc 250 litres & n.exc 500 litres |
| 124 | Supply and Fixing 500 litres rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed . |
| 125 | All as per item No 124 above but 1000 litres capacity. |
| 126 | Taking up or down steel tubing and connections 15mm bore complete all as specified & directed . |
| 127 | All as per item No 126 above but 20mm bore. |
| 128 | Refixing the steel tubing 15mm bore obtained from item No. 126 above after, cleaning in new or old position (wall, ceiling, floor etc.) complete all as specified and as directed . |
| 129 | All as per item No 128 above but 20mm bore obtained from item No 127 above |
| 130 | Supply and Fixing GI water tubes 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed . |
| 131 | All as per item No 128 above but 20 mm dia bore |
| 132 | Supply and Fixing in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified & directed . |
| 133 | Material and Labour for applying acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over and including one coat of paste with rusting material over one coat of putty (if required) including complete removal of existing surface finish with wire brush and washing complete all as specified & directed . Notes: (i) Paste of rusting material shall be applied as per manufacturers instructions. Make : Asian/Berger or equivalent. (ii) Make of acrylic Smooth exterior paint shall be from Asian / Dulux/Nerolac or equivalent as approved by GE (iii) 1mm thick wall care cement putty wherever required shall be measured and paid separately. |
| 134 | Material and Labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along thewall and rodding etc. complete all as specified & directed . |
| 135 | Material and Labour for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified & directed . |
| 136 | Material and Labour for silicon gel filling with gun to fill gaps between aluminium door frames/similar articles to arrest water coming inside from cills/jams and similar joints in other places complete all as specified and as directed. Note:- make of silicon shall be approved by GE before use. |
| 137 | Material and Labour for cement concrete type B1 (1:2:4)(20MM Graded aggregate)in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified & directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender