Tender For Provn For Construction Of 04 X Incinerator For Office Complex At Naya Raipur Mil Stn.
Tender Value
3.25 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
17 days left
EMD
6600
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raipur → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn For Construction Of 04 X Incinerator For Office Complex At Naya Raipur Mil Stn.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in any soft soil complete all as specified and as directed. |
| 2 | M & L cement concrete 1:5:10 of type E2 (using 40mm graded stone aggregate) as in filling and mass concrete |
| 3 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out all as specified and directed. |
| 4 | Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm |
| 5 | Removing excavated material n exc 50m and depoting where directed at a level n exc 1.5m above the starting point. |
| 6 | M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 7 | M&L rendering 15 mm thick in cement plaster 1:4 on fair faces of brick work and surface finished even and fair |
| 8 | M & L applying three coats of white wash on walls incl preparation of new surfaces |
| 9 | Earth filling under floor including spreading, levelling, watering and well ramming in layers n exc. 25cm thick. |
| 10 | M&L for Hard core of broken stone of gauge exc 63mm but n.exc 100mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to a true surface all as specified and directed. |
| 11 | M&L Cement concrete 75mm thick type D-2 (1:4:8) using 40mm graded stone aggregate as in sub base of floor all as specified and directed. |
| 12 | M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone agg laid in panel finished even & smooth with using extra cement as in flooring complete all as specified and as directed. |
| 13 | Supply only glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and directed |
| 14 | M& L RCC 1:2:4 Type B-O (Using 12.5mm stone aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses |
| 15 | M&L TMT bars 10 mm dia and over cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified |
| 16 | M&L for vent cowl for incinerator including fixing of PGI sheet, nut and bolt 150 mm long and 12mm dia of bolt with round washer 3mm thick including flat iron 30*5 mm. |
| 17 | S & F framed work as in chowkats or frame of door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fiting complete all as specified. |
| 18 | M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by engineer-in-charge. |
| 19 | M&L 100 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base cement concrete surfaces complete all as specified and directed by engineer-in-charge. |
| 20 | M&L for machine pressed precast concrete interrlocking paver block any shape and size with gray cement and no pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over and complete all as specified and direced by engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender