Tender For Special Repair To Building Number P-03 & P-10 In 2Nd Rajendra Line At Old Cantonment Patiala Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
82660
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Building Number P-03 & P-10 In 2Nd Rajendra Line At Old Cantonment Patiala Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets |
| 2 | S & F powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 38mm x 38mm x 1.5mm and cross Tee of size 38mm x 38mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm including 7-8 mm thick GRG Ceiling boards of make 'E board classic designer board (Cascade or Occenic) fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified.complete all as specified and as directed. |
| 3 | Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc. complete all as specified and as directed. |
| 4 | M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:4 finished even and smooth ( without using extra cement ) with sagol finish complete all as specified and as directed. |
| 5 | M & L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6 finished even and smooth ( without using extra cement ) complete all as specified and as directed. |
| 6 | M&L preparation of new plastered surface of walls and applying two coats of oil bound distemper over 1.5mm thick wall care putty complete all as specified and as directed. |
| 7 | M & L preparing plastered or unplastered new surfaceand applying two coats of cement base paint over a coat of cement primer on new wall plastered surfaces complete all as specified and as directed. |
| 8 | Demolition of Brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar complete all as specified and as directed. |
| 9 | M&L brick work with sub class B bricks, straight or curved on plan n.exc 6m mean radius in cm 1:6 using old size brick complete all as specified and as directed. |
| 10 | Taking down Chowkats or frames exc.1.5 Sqm but not exc. 4 Sqm each but with shutters ( without taking off shutters from the frame ) |
| 11 | Taking down shutters of any description n exc 1 Sqm each and removing to or from store complete all as specified and as directed. |
| 12 | Taking down chowkat or frame with shutters (with out taking off shutter from the frame ) not exceeding 1.5 Sqm each and removing to or from store as directed by Engineer-in-Charge. |
| 13 | S&F factory made UPVC black colour (Matt Finish) door shutter made of extruded profile with wall thickness of 2.3mm(+-0.2mm) door profile with hollow section with multy chamber. Frame (60x62mm),sash(42mmx67mm).sliding interlock(one verticle length in each shutter)(45.5mmx28mm).Glazing bead(24.5mmx16mm)will be mittred cut and fusion welded at all corner.including drilling holes for fixing hardware and drainge of water etc am,.making arrangement for fixing of hardware.EPDM gasket,1.2+0.2 mm thick galvanised steel frame(30mmx21.5mm).sash (30mmx18mm)profile to be inserted in required profile.Including Chowkat frame 101.6x44.45mm and thickness of Upvc member shall be 1mm suitable size will be finshed to the wall with 8mmx100mm long fasteners.hardware touch lock of zinc alloyed powder coated) including 5mm thick glazing with selected quality glass . Note.The unit rate coated by contractor includes cost of glass and all other conncted accessories,handle ,hinges etc measured for purpose.Make:H2O window,Fenesta,Anuplast Note- For UPVC chowkat and frame,sash and mullion extruded profile minus 5% tolerance in dimension i.e in depth and width of profile shall be acceptable.Variation in profile dimension in higer side shall be accepted but no extra payment on this account shall be made. |
| 14 | S & F factory made powder coated Upvc (Black Matt finish) sliding window,three track shutters,(two shutter glass and one shutter wire mesh) side hung type with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, Chowkats snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 4mm thick and incl GI wire mesh 0.56 mm nominal dia of wire and average width of aperture 1.18 mm , size of side rails , top rails , bottom rail 85x44.5mm and size of chowkat frame 101.6x44.45mm and thickness of Upvc member shall be 1mm thick complete all as specified.Note- For UPVC chowkat and frame,sash and mullion extruded profie minus 5% tolerance in dimension i.e in depth and width of profile shall be acceptable.Variation in profile dimension in higer side shall be accepted but no extra payment on this account shall be made. |
| 15 | S & F extruded Brass handles, fabricated type polished 150 mm complete all as specified. |
| 16 | S & F brass , barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed in repair 200 mm complete all as specified. |
| 17 | S & F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 250mm complete all as specified. |
| 18 | S & F brass , sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 300mm complete all as specified. |
| 19 | S & F floor door sotpper of brass , body and tongue with hard drawn steel spring 140mm overall length of cover plate complete all as specified. |
| 20 | S & F Butt hinges, medium weight, Brass, and fixed 125 mm length complete all as specified. |
| 21 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 85 mm X 45 mm size, applying PVC solvent cement and screwed with full body threaded, star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with mild steel hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engr-in-Charge. |
| 22 | S&F 28-30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified |
| 23 | S & F in Repairs Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples Complete all as specified. |
| 24 | S & F Butt hinges, medium weight, stainless steel, and fixed 100 mm length complete all as specified. |
| 25 | S&F powder coated aluminium handles 150mm complete |
| 26 | S&F powder coated aluminium tower bolt 200mm long complete |
| 27 | M & L for Cement concrete Type C1 1:3:6 ( 20 mm graded aggregate ) as Bed Block for hold fast. |
| 28 | M & L for preparation of new or previously untreated wooden surfaces with priming with pink primer with two coat of synthetic enamel ( ordinary tint ) of surfaces of any description, not ottherwise described, over 10 cm width or girth complete all as specified.. |
| 29 | Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified. |
| 30 | M & L for 75 mm thick Cement concrete type C-2, 1:3:6 (40 mm graded aggregate ) as a Plinth protection. |
| 31 | Dismantling floor ,hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises Complete all as specified. |
| 32 | M&L for 8 to 10 mm anti-skid premium quality coloured tiles area of each tile exc 0.42 spm but n exc 1 sqm, as in floors etc. in any pattern shede light & dark tiles as approved, set and jointed in Epoxy Cartridge tile Grout using fill the joint 2-3mm of tiles complete, in floors etc. over & including 15 mm thick screed in cement mortar (1:6) over and pointed including all as specified.Note- Epoxy Black,Golden Colour. |
| 33 | All as per Item No -32 but as a skirting with 10 mm thick rendering 1:4 complete all as specified. |
| 34 | M&L Ceramic Non-skid colouerd tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc.set and over & including 15 mm thick screed in cement mortar (1:6) jointed in neat cement slurry with and pointed in coloured cement match the colour of tiles all as spd. |
| 35 | M&L for 7-to 8mm ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 7-8 mm thick, in any pattern of light & dark/highlighters es etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified |
| 36 | M & L for 12 to 14 mm thick Artificial Granite (of any type) work steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified. |
| 37 | M & L for Machine cut cudappa stone slab 20 - 25 mm thick over cement screed base over & including 15 mm thick screed in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 38 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified. |
| 39 | M & L for amplifico winter solid rock concrete tiles 250mmm x 250mm x 22mm thick moulded with grey cement and pigment, including 15mm thick scred in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and as directed. Sample of tiles as approved by GE. |
| 40 | S&F in repair Angle stop cock with wall flange 15mm cast copper alloy, screwed for iron pipe or for brass ferrule long body.Make: Jaquar Cat Part No-FON-40053PM OR equivalent in /Hindware/Kohlar. |
| 41 | S&F in repair 15 mm bore bib cock with wall flange, cast copper alloy, chromium plated, fancy type with screwed down, screwed for iron pipe or for brass ferrule long body.Make: Jaquar Cat part No OPP-15037PM OR equivalent in /Hindware/Kohlar. |
| 42 | S&Fin repair brass chromium plated Basin mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed. Make: Jaquar Cat Part No ORP-10011BPM OR equivalent in /Hindware/Kohlar. |
| 43 | S & F in repairs vitreous china wash basin oval shape, white, flat back, size 580 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia Waste fittings, brass, chromium plated complete all as specified. |
| 44 | S & F 32 mm dia low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified. |
| 45 | S & F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified. |
| 46 | S & F in repais Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe )Complete all as specified. |
| 47 | S&F in repair Europen WC china ware coloured cascade with cistern and complete fitting.Make: Jaquar/Hindware/Kohlar |
| 48 | S&F in repair toilet Roll holder stainless steel flap all as specified. Make- Jaquar Cat Part No CAN-1153S or equivalent in /Hindware/Kohlar |
| 49 | S & F 75 mm dia PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement complete all as specified. |
| 50 | S&F in repair 15mm CP connection 600mm long including washer and brass nuts all as specified. |
| 51 | S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm with grating and union for discharge pipe (excluding flushing cistern ) including waste fitting, waste pipe Complete all as specified. |
| 52 | Taking up or down existing steel tubing and connections, 15mm bore complete all as specified. |
| 53 | S&F for CPVC pipe fixed on wall/ceiling or laying in floor of 15mm bore fittings. |
| 54 | Taking up or down existing steel tubing and connections, 20mm bore complete all as specified. |
| 55 | S&F for CPVC pipe fixed on wall/ceiling or laying in floor of 20mm bore fittings. |
| 56 | Dismantling water tanks and removing to store of capacity exc 500 & not exc 1000 ltrs. |
| 57 | Supply and and fixing, hoisting PVC tank of 1000 ltr capacity including Supplied and fixed 20mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed. |
| 58 | S&F framed work such as grills, gratings, etc with ends of bars, shouldered and /or riveted, or forged into spicks, framed guard bars, ladders, framed balusters, walk ways, railings, framework of water tankd and similar work conforming to Fe 410-O all as specified. |
| 59 | S&F in repair 20mm Gate valve, with iron wheel head , screwed both ends for iron pipe and fixed . |
| 60 | S&F 8mm thick corner glass shelf fixed with brackets and including chromium plated brass screws and wooden/plastic cleats all as specified and directed by Engr-in-charge. |
| 61 | S&F fancy type looking mirror of size (600x450) bevelled edge mirror of selected quality of as directed by Engr-in-Charge |
| 62 | S&F powder coated Anodised aluminium frame (powder coating shall not be less than 50 micron) for doors, windows,ventilators & Partation with one or more rebates including joining cleat for fixing, aluminium handle if reqd etc. complete shall as specified. |
| 63 | S&F sheet glass 4.00mm thick ordinary quality and glazing with oil putty in square exc 0.50Sqm in each panes. |
| 64 | S&F in repair Soap Dispenser with glass bottle (stainless steel) all as specified. Make- Jaquar Cat Part No ACN -1135N or equivalent in/Hindware/kohlar |
| 65 | M & L for Cement concrete as PCC 1:5:10 type E-2 using (40mm graded stone aggregate) as foundations,filling and mass concrete complete all as specified. |
| 66 | Demolition & breaking up of 150 mm dia of drain pipe (salt glazed stone ware AC or reinforced concrete) set in cement mortar. |
| 67 | S&F 110mm bore PVC(SWR) pipes single socketed in any length wilth rubber ring joints laid in floor or on walls complete all as specified |
| 68 | S&F 110mm bore PVC (SWR) bend any raidus |
| 69 | S&F PVC (SWR) Pipes 75 mm bore with rubber ring joints laid in floors or on walls or laid in trenches. |
| 70 | S&F 75mm bore PVC (SWR) bend any raidus |
| 71 | S&F 10- 12mm thick toughned tinted glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including all necessary fittings (patches, connectors, brackets etc) all as specified and directed |
| 72 | M&L for preparing old decorative plastered surface of walls by removal of existing treatment washing down and applying two coats of distemper oil emulsion over a coat of primer over one coat of wall care 1.5mm thk putty all as specified and directed by engr-in-charge. |
| 73 | M & L for preparation of untreated wooden surfaces with two coat of synthetic enamel ( ordinary tint ) paint over a coat of pink primer of surfaces of any description, not ottherwise described, over 10 cm width or girth complete all as specified. |
| 74 | M&L for preparation of old decorated plastered or unplastered surfaces by brooming down or steel wire brushing scrapping down smoke soot moulds mass and efflorescent salts and trading oil and greasy spots and evenly applying two coats of cement based paint over one coat of primer on surface of walls etc complete all as specified and directed. |
| 75 | Dismantling of plain or corrugated steel sheeting any guage thicness including Nainital or similar pattern roof covering. |
| 76 | S&F Steel work in tubular/Hollow sectionincluding special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St. - 240. complete all as specified and directed. |
| 77 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified. |
| 78 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified. |
| 79 | M & L two coats of synthetic enamel paint of new steel surfaces over a coat of primer with red oxide over preparation of new surfaces. |
| 80 | S&F in repair Stainless steel curtain rod of 20 mm inner dia (in lengths as directed) of & including decorative finial at both ends and pair of S S steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, (Victorian design)all as specified & as directed. Make -Vista, sample are avaible in the office for checking and quoting the same |
| 81 | S&F of 5mm thick ACP( aluminium composite panel) sheet on wall/coloumn/roof required to fixed with screws with required any shape icluding joint filled with silicon and approved colour by GE and complete all as specified and directed. |
| 82 | S&F 5mm thick high density fibre board pre-laminated on both sides (water proof) as in partition/door panels fixed with and including EPDM gasket to render the glazing, air and water tight etc aluminium beading of size as required complete all as specified and directed by Engr-In- Charge |
| 83 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 84 | S&F 5mm thick PVC sheet fillet width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing. |
| 85 | Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified. |
| 86 | Demolition of mud phuska on roof any thickness all as directed. |
| 87 | M & L for Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified. |
| 88 | M&L PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregates as in padding over roof, minimum thickenss at khurra as 25 mm to maintain a slope of 1:40, complete all as specified and directed. |
| 89 | M & L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified. |
| 90 | M & L for Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/Sqm by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints, overlaps of joints shall be 75mm longitudianal and 100 mm on transverse direction etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. |
| 91 | M& L for Precast PCC plain factory made tiles, ISI marked, 22 mm thick of size 250 mm x 250 mm, fabricated using grey cement & no pigments. on 15 mm thick cement mortar (1:3) bedding and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces complete all as specified. |
| 92 | M&L for Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed. |
| 93 | Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling etc all as specified and directed. |
| 94 | M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor for one light/fan/bell point in and including NEW PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with PVC modular top cover plates of suitable size for mounting of modular type switches/sockets/regulators including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including cutting chases and making good the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engr-in-charge.Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii) -Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item. |
| 95 | All as per Sl item No 94.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed. |
| 96 | All as per Sl item No 94.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed. |
| 97 | All as per item No 94.00 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board. |
| 98 | S & F in replacement of Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified. |
| 99 | S & F in replacement of Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified. |
| 100 | S & F in replacement of Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified. |
| 101 | S & F in replacement of Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified. |
| 102 | S & F in replacement of Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified. |
| 103 | S & F in replacement of ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed |
| 104 | Supply and Fix Lamp holder including LED bulb 9 W including flexible wire 0.5 Sqmm copper cable all as specified & directed by Engr-in-charge. |
| 105 | Supply and fix mirror light with linear & compact 12 W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt complete all as specified and directed by Engr-in-charge. |
| 106 | S & F in replacement of New generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge. |
| 107 | S & F Solar LED post top luminaire 20 W of high efficiency poly crystalline Solar Module with maintenance free Lithium battery of having 3 days backup with 2 PIR Sensor with 360 degree coverage , 5700K, IP-65 made of pressure die cast aluminium housing & clear glass complete with all accessories internally prewired wire including electronic driver, connecting with fitting and including disconnecting and taking down existing unsv light fitting complete all as specified and directed by Engr-in-charge. |
| 108 | Supply and Fix highly reliable energy efficient multi high power LED with Lens flood light designed with optimized optical performance and good heat dissipation with uniform distribution of capacity 70 Watt 7800 lm, CCT 5700-6500K, CRI>70 rated voltage 220-240 V AC 50 HZ power factor >0.9, IP 66epoxy powder coated pressure die casted aluminium housing with bright anodised aluminium reflectro and enclosed with heat resistant and toughened glass having constant current driver suitable for 140-280 V AC with working range with all accessories internally pre wired including connectingwith flexible copper conductorto connector of the light with necessary fixing arrangements complete all as specified and directed by Engr in Charge. Make: Philips cat ref BVP173 LED78/CW 70W WB Grey L1000 or equivalent in Havells, Bajaj, Crompton |
| 109 | Supply and fix surface/recess mounted LED luminaire 36 watt cool white 4000-5000K suitable for gridd celling cutout dimensions: 2x2 Ft. incl connecting with twin core copper wire from ceiling rose to fitting, Fixture size: (LxWxH) in (595x595x65) mm incl lamp and driver all as specified & directed. |
| 110 | S & F in replacement of Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable all as specified & directed by Engr-in-charge. |
| 111 | Supply and fix in repalcement of Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP54 protection complete all as specified & directed by Engr-in-charge. |
| 112 | Supply and fix in repalcement of MCB , SPN, 240 Volts ,32-40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engineer-in-Charge. |
| 113 | Supply and fix in repalcement of MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge. |
| 114 | M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqmm Copper conductor Earth wire shall be measured as one unit) Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring. |
| 115 | M & L in replacement of UNSV Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 |
| 116 | S&F incl taking down 20 watt wall mounted, new generation LED batten fitting length ~ 4 feet with polycarbonate diffuser andextruded thermoplastic body > 90 lumen/watt having correleted color temperature(CCT) of Emitting light 6500/3000 K with CRI of LED >90 . including all fixing accessories & connecting up with PVC insulated twin core flexible copper conductor cable of suitable size complete all as specified and directed by Engr in Charge. |
| 117 | S&F incl taking down 10 watt wall mounted, new generation LED batten fitting length ~ 2 feet with polycarbonate diffuser andextruded thermoplastic body > 90 lumen/watt having correleted color temperature(CCT) of Emitting light 6500/3000 K with CRI of LED >90 . including all fixing accessories & connecting up with PVC insulated twin core flexible copper conductor cable of suitable size complete all as specified and directed by Engr in Charge. |
| 118 | S & F MCCB, 4 Pole, 125 A, 25 KA for fixing in DB including proper thimble connection, thermal and magnetic release protection complete all as specified and directed by Engineer-in-charge. |
| 119 | Supply and fix in replacement of epoxy power coated MCCB distribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified by Engineer-in-charge. (Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimbles used for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size complete all as specified and directed by Engr-in-charge. |
| 120 | XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core supplied & laid in replacement complete all as specified& directed by Engineer-in-Charge. |
| 121 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed. |
| 122 | Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm thick each layer of any kind of soil. |
| 123 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point. |
| 124 | Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm above with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed. |
| 125 | Cutting of hardstanding floor/wall for laying of cable including matching with suface by using cement concrete 1:2:4 type B-0 all as specified and directed. |
| 126 | Supplying & laying factory made unreinforced Precast concrete cable covers class LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables complete all as directed by Engr-in-Charge |
| 127 | Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed. |
| 128 | Supply and fix Exhaust fan AC single phase 230/240 v of size 250 mm sweep 900 rpm Engineering thermoplastic body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver complete all as specified and directed by Engineer-in-Charge. |
| 129 | Supply and fix Exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver complete all as specified and directed by Engineer-in-Charge. |
| 130 | Material and labour for making hole of suitable size for PVC/metal exhaust fan 250 mm/ 300 mm sweep in wall for grouting and making good the surface complete all as specified and directed by Engr-in-charge. |
| 131 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with MCB SPN 32 Amps, complete all as specified and as directed by Engineer-in-charge. |
| 132 | M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . |
| 133 | Supply and installing of water heater storage type of capacity 50 liters with electrical heating back up of 2 KW including all necessary required acessiories like pvc / cp connections, necessary nut bolts, washers, screws etc and make up water tank complete all as specefied and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender