Tender For Repairs To Compound Wall, Fencing, Drains, Storm Drains Culvert And Footpath Etc Under Age B/R (Ch) Of Ge (U) Chandimandir.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
17 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Compound Wall, Fencing, Drains, Storm Drains Culvert And Footpath Etc Under Age B/R (Ch) Of Ge (U) Chandimandir.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Reinforced cement concrete (reinforcement cut as required to facilitate demolition) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for all as specified and directed by Engineer - in - Charge . |
| 2 | M&L Cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate for foundations, fillings and mass concrete all as specified and directed by Engineer – in - Charge. |
| 3 | M & L cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in lintels up to 1.5 m clear span, seismic and other similar bands, benching, coping, bed blocks, apex stones and kerbs etc including use of necessary form work all as specified and directed by Engineer - in - Charge . |
| 4 | M & L precast cement concrete Type B0 1:2:4 using 12.5mm graded crushed stone aggregates as in louvres and jallies, 45mm thick (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured separately) set in cement mortar 1:4 all as specified and directed by Engineer - in - Charge |
| 5 | M&L Brick work with sub class 'B' old size burnt bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge . |
| 6 | M&L Brick work, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 except bricks all as specified and directed by Engineer - in - Charge. (Note : Serviceable bricks retrieved from dismantling of brick work will be used.) |
| 7 | S & F mild steel work as in posts, struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, and necessary provision of notch including welding and cutting at bottom etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 all as specified and directed by Engineer - in - Charge. |
| 8 | S & F mild steel work as in round bars and flats and similar articles etc conforming to Fe-290 Gde E-165 bent to shape and drilling of holes for posts etc. all as specified and directed by Engineer - in - Charge. |
| 9 | S & F framed work such as grills, grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work for water tanks and similar work conforming to Fe-290 Gde E-165 all as specified and directed by Engineer - in - Charge. |
| 10 | Fixing only of chain link fencing including line wire, any mesh size and type to any type of standard rails straining bolts etc including provision of binding wire all as specified and directed by Engineer - in - Charge. |
| 11 | S & F as in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed by Engineer - in - Charge. (Each line to be measured separately) |
| 12 | Supply only chain link MS galvanised fencing any size or type all as specified and directed by Engineer - in - Charge. |
| 13 | M & L for 75mm thick cement concrete type C-2 (1:3:6) using 40mm graded crushed stone aggregate as plinth protection etc laid in alternative bays and joints shall be filled wih bitumastic gola with 80/25 bitumen (01 part of bitumen and 03 part of sand), all as specified and directed by Engineer - in - Charge. |
| 14 | M & L for 75mm thick cement concrete type D-2 (1:4:8) using 40mm graded crushed stone aggregate as in sub floors, sub bases etc all as specified and directed by Engineer - in - Charge. |
| 15 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.all as specified and directed by Engineer - in - Charge. |
| 16 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.all as specified and directed by Engineer - in - Charge. |
| 17 | M & L for chequered cement concrete designer pre-polished glossy finished tiles 20cm x 20cm x 25mm thick with grey cement and pigments set, heavy duty, jointed and pointed in neat cement slurry and pigments as in floors over and including 15mm thick screed bed of cement mortar 1:6 complete all as specified and directed by Engineer - in – Charge. |
| 18 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 19 | M & L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & fair without using extra cement all as specified and directed by Engineer - in - Charge . |
| 20 | M & L rendering 15mm thick on other than fair faces of brick work in CM 1:4 finished even & fair without using extra cement all as specified and directed by Engineer - in - Charge . |
| 21 | Taking down cement plaster/ terrazo finish on brick wall including racking out joints, hacking for keys scrubbing down with water all as specified and directed by Engineer - in - Charge. |
| 22 | M & L applying two coat of cement base paint on new plastered surfaces of walls including preparation of surfaces over a coat of primer complete all as specified and directed by Engineer - in – Charge |
| 23 | M & L providing two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of surface of any description over 10 cm width or girth all as specified and directed by Engineer - in - Charge . |
| 24 | M & L providing two coats of synthetic enamel paint over new surface over a coat of red oxide primer on steel surfaces including preparation of surface of any description not exceeding 10 cm width or girth all as specified and directed by Engineer - in - Charge . |
| 25 | Dismantling of brick work built in cement mortar including all quoins, arches, pillar etc and precast concrete articles for portion ordered to be dismantled all as specified and directed by Engineer – in - Charge. |
| 26 | Demolition of cement concrete (un-reinforced) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for all as specified and directed by Engineer - in - Charge . |
| 27 | Dismantling wrought iron or mild steel work of any description all as specified and directed by Engineer - in - Charge . |
| 28 | Dismantling of fencing wire mesh, any type all as specified and directed by Engineer - in - Charge. |
| 29 | Dismantling posts or struts embedded in concrete / hard core including taking out embedded portion and making good disturbed ground all as specified and directed by Engineer - in - Charge. |
| 30 | S&F Factory made SFRC Pre-cast RCC manholes covers EHD-35 of size 1200mm X 600mm X 100 mm thick, conforming to IS-12592 duly fixed on manhole /gully trap opening complete all as specified. |
| 31 | Form work to sides and soffits of floor or roof beams, lintels cantilevers, shelves including supports, over hangs and the like for rough finished flat surfaces complete all as specified and directed by Engineer – in – Charge. |
| 32 | M & L RCC 1:2:4, (nominal mix), Type B-0, using 20mm graded crushed stone aggregates as in beams, cantilevers, bressummers,, lintels over 1.5mtr clear span etc all as specified and directed by Engineer - in - Charge. |
| 33 | M & L mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed by Engineer - in - Charge . |
| 34 | M & L mild steel TMT bars 6 to 8mm dia cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed by Engineer - in - Charge . |
| 35 | M & L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick cement mortar 1:4 all as specified and directed by Engineer - in - Charge . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender