Tender For Special Repair Of Married Accommodation Building Number P-111(01 To 08 Other Rank Married Accommodation) Of Field Area Family Accommodation(Fafa)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Sep 2026
18 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Married Accommodation Building Number P-111(01 To 08 Other Rank Married Accommodation) Of Field Area Family Accommodation(Fafa)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of brick tiles or terracing tiles single layers laid bedded and pointed in any mortar on roofs complete all as specified and directed. |
| 2 | Removing of Mud in roofs, any thickness, including plastering and leeping (whether full thicknes removed or only a part thereof) |
| 3 | M&L for wire brushing and cleaning topsurface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc. complete all as specified and directed. |
| 4 | M&L for cement concrete 1:3:6 type C1 using 20 mm graded aggregate as in padding over roof complete all as specified and directed. |
| 5 | M&L for 10 mm thick rendering on top of roof in CM 1:4 incl mixed with WPC(WPC shall be paid separately) |
| 6 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified. |
| 7 | Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including on a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm thick 5 layered APP membrane shall be laid using butane torch and sealing all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength in longitudinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147 |
| 8 | M&L for factory made Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed flush in cement mortar (1:3) including 15mm thick screed bed of CM 1:3 with integral liquid water proofing compound complete all as specified and directed. |
| 9 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregates) as in roof kerbs, benches and water troughs etc. including necessary moulding complete all as specified & directed. |
| 10 | Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition)Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work |
| 11 | S&F Steel work of square/round pipe as in post/purlin/rafter including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 Corrugation shape and colour of sheet shall be approved by GE) |
| 12 | S&F rolled mild steel sections as in framing for cladding, glazing, framing for chajja and the like fixed with angle cleats and connecting plates, etc. conforming to Fe-410 (Gde E- 250) quality B complete all as specified and directed. |
| 13 | S & F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws Complete all as specified and directed.(Note : Corrugation shape and colour of sheet shall be approved by GE) |
| 14 | Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed. |
| 15 | Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed. |
| 16 | Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc compplete all as specified and directed. |
| 17 | M&L for dubbing out average 10 mm thick on irregular surfaces of soffit of slab/chajjas/sunshades etc in CM 1:4 |
| 18 | Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound complete all as specified. NOTE:WPC will be measured and paid for separately |
| 19 | Supply only liquid water proofing comound ISI Marked complete all as specified and directed. . |
| 20 | M&L 10mm thick cement plastering in CM 1:6 on fair faces of brik work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 21 | M&L 5mm thick cement plastering in CM 1:3 on fair faces of cocnrete ceiling surfaces finished even & smooth wihtout using extra cement complete all as specified and directed. |
| 22 | M&L for efflorescence treatment to walls complete in all respect with following procedure :- (a) Removing existing plaster over the affected bricks to be removed using mechanical means. The affected bricks to be completely exposed complete all as specified and directed.(b) Apparent visible efflorescence to be first cleaned using hard wire brush and all cyrstal deposits to be removed. The bricks shall then be cleaned using soft brush of powdery crystals removed. Then make a 1 to 4 solution of vinegar and water (1 part vinegar to 4 parts water) and apply it to the efflorescence affected area using a nylon brush. Allow the vinegar/ water solution to sit on the surface of the affected area for 15 minutes, but do not allow the solution to dry. Rinse the area with clean water, using low pressure jet. Two cycles of cleaning using vinegar water solution to be repeated complete all as specified and directed. (c) The joints of bricks so cleaned shall be pointed using cement putty made a site using Sika Latex/SBR polymer diluted at ratio of 1:4 with water. The solution so made shall be used to be mixed with cement to make a putty consistency paste. The cement putty shall be then worked out in the joints which are clean and in SSD condition. (d) The bricks so pointed shall be cleaned of all dust or deposit using brush. A undiluted single component acrylic polymer-Sika Raintite, to be used to prime the brick surface. The primer while being tacky the first coat of water proofing coating is done, second coat is applied after a time interval of 4-6 hours after the first coat has dried. The water proofing coating shall be two component polymer modified cementitious coating-Sika top seal-107, having a thickness of 1.5mm in two coats. The material to be factory batched and ready to use. The two components shall be mixed using low speed drill having a RPM 350-450 and fitted with a paddle. The mixing to be done for 3-4 mintues to give a brush able consistency mix. The coating shall be done using brush 100-150mm wide brush. It is to be take care that material while being used is agitated every 3-5 mintues to avoid powder part getting settled. The water proofing coating shall have below properties Tensile Strength - 4.56 N/mm2 after 14 days exposure (According to ASTM D 2370) Bond Strength 2.0 N/mm2 at + 27o C (failure in substate). After application of second coat and while the material is still wet, coarse sand is sprinkled over the coating so as to ensure proper mechanical key is provided for subsequent plaster. (e) M&L for plastering 15mm thick over the treated surface shall be done with 1:4 cement sand plaster added with acrylic polymer-Sika Plastocrete Plus, @ 3% by weight of cement. Note : The complete item shall be got executed through the authorised applicator of manufacturer only all as specified and directed.. |
| 23 | S & F factory made pressed steel frames size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified. |
| 24 | S & F factory made pressed steel frames size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified. |
| 25 | M & L for providing PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in filling pressed steel frame |
| 26 | M & L providing, cement concrete type C-I 1:3:6 (using 20 mm graded aggregate) as in bed plates (for hold fast block) etc. complete all as specified & directed. |
| 27 | Demilition of cement concrete of any description and in any position not otherwise specially provided for |
| 28 | M&L for PCC of grade 1:2:4 type B-0 (Nominal Mix) using 12.50mm graded aggregate mixed with WPC as manufacturere instruction laid in slop 1:2 including making PCC gola at the junction of walls/beams and slab for smooth turning of membrane as directed by Engr-in-Charge |
| 29 | M&L for rendering 15mm thick in CM (1:4) on wall/floor surfaces of sunken floor finished even and smooth with WPC as per manufacturer's instruction and brushing with cement slurry @ 0.25 kgs of cement per sqm |
| 30 | S&F for 25mm bore GI medium grade 450mm long spout |
| 31 | M&L for lean concrcete type D2 (1:4:8) using broken brick aggregate fo filling sunken portion |
| 32 | Roughening surface of old concrete / terrazo floor by peecking sweeping clean and washing down with water to remove dust etc. complete all as specified. |
| 33 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 34 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar. |
| 35 | Taking up or down of 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 36 | Taking up or down of 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 37 | Supplying and laying 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and wall complete all as specified etc complete all as specified. |
| 38 | S&F 20mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete concealed to walls and ceilings or laid in floors complete all as specified and directed. |
| 39 | Cutting chase, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for conceled water pipe etc. and making good cutting not exc 10Cm girth on Brick walls. |
| 40 | M&L for 25mm thick PCC (1:2:4) type B0using 12.5mm graded stone agg as in Top surfaces finished even and fair complete all as specified and directed. |
| 41 | M&L for 100mm dia Cast iron Nahani trap long necked, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as directed by EIC |
| 42 | M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 all as specified. |
| 43 | All as per item No 42 above but on vertical surfaces incl 10mm thick rendering in CM 1:4 complete as specified. |
| 44 | M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 all as specified. |
| 45 | M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) complete all as specified. |
| 46 | M&L UDAIPUR GREEN Marble 15-17 mm thick laid and jointed with grey cement slurry incl rubbing and polishing with granite finish over and including 20 mm thick CM 1:4 screed bed complete all as specified and directed.(Note: All exposed side of stone slab to be rounding) |
| 47 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant including 4 nos stainless steel butt hinges, 2 Nos stainless steel handles of 150mm, 1 Nos sliding door bolt of 300mm long,and 2 nos of tower bolt of 150mm long of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 48 | S&F Factory for 2nd class hardwood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauge, etc., divided into squares, with plain, chamfered or rounded, mitered and rebated sash members, any numbers and mited beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20(a) supplied and fitted to chowkats complete all as specified and directed. |
| 49 | S&F Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire stapples complete all as specified and directed. |
| 50 | S&F solid PVC door frames of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, supply & fixing in opening as per specification & drawing . |
| 51 | Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification colour WOOD COLOUR |
| 52 | S&F powder coated Anodised aluminium(powder coating shall not be less than 50 micron) door /window frame and shutters/fixed partition including necessary joining cleats, glazing clips, ruber neoprene packing in each door, anodised aluminum snap beading screws etc. complete all as specified |
| 53 | M&L for 5 mm thick tinted glass of any description |
| 54 | S&F frosted Sheet glass 4mm thick , selected quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified. |
| 55 | S&F SS 150mm long Powder coated barrel tower bolt of extruded section |
| 56 | S & F SS butt hinges 100 mm size powder coated of medium weight complete all as specified and directed |
| 57 | S&F SS 100mm long Powder coated handle D type complete all as specified and directed. |
| 58 | S&F powder coated hook and eye complete all as specified. |
| 59 | Supply & fixing Mild Steel Framed work such as Guard Bar/grill welded to window frame or fixed independantlys, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed. |
| 60 | S&F Stainless steel butt hinges medium weight 100mm long complete all as specified and directed. |
| 61 | S & F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 62 | M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed. |
| 63 | S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed. |
| 64 | S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed. |
| 65 | S & F Floor door stopper of 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 66 | Demolition and breaking up drain pipes (salt glazed ware,AC or Reinforced concrete) set in cement mortar internal dia of pipe in 100mm |
| 67 | S&F 75 mm bore PVC (SWR ) PIPE in any length fixed to walls and floor with and including rubber ring joint and MS clamps .. |
| 68 | S&F 110 mm bore PVC (SWR ) PIPE in any length fixed to walls and floor with and including rubber ring joint and MS clamps .. |
| 69 | M&L PVC(SWR) bends 75 mm(any radius), diminishing pieces or tapers(larger bore measured) fixed in repairs |
| 70 | M&L PVC(SWR) bends 110 mm(any radius), diminishing pieces or tapers(larger bore measured) fixed in repairs |
| 71 | M&L PVC(SWR) branch piece double (double Y) equal or unequal 110 mm bore |
| 72 | Dismantling of water tanks exc 1000 & n exc 2000 ltr capacity & removing to store all as directed by the Engr-in-Charge. |
| 73 | S&F rotational moulded PVC water storage tank cylinderical, vertical with closed top of 1000 ltrs capacity, hoisted and fixed in position with and including PTMT float valve 20mm dia and making connections for inlet and outlet complete all as specified and directed. |
| 74 | S&F in repairs kitchen sinks made of stainless steel 1mm thick with drainage board over all size 915mmx460mm bowl size 410mmx330mmx160mm fixed in repairs complete all as specified and directed by Engr-in-Charge |
| 75 | S&F in repair stop cock /angle cock of 15mm cast copper alloy,screwed down, with chromium plated fancy type high pressure screwed both ends for iron pipe or for union complete all as specified and directed. |
| 76 | S&F in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, all as specified, of 15mm bore, fancy type, chromium plated with long shank and cup (Concealed type). |
| 77 | S&F in repair bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. |
| 78 | S&F in repair 15mm bore swan neck wash basin mixer of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. |
| 79 | S&F in repair vitreous china wash basin, white flat back screwed down for iron pipewaste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand and incl corrugated waste pipe but excl taps, chain and plug complete all as specified and directed. |
| 80 | S&F in repair Water Closet ( Squatt pattern) Orissa pattern size 580 mm x 440mm, white, with 'P' or 'S' integral foot rest complete including provision of PCC bedding, complete all as specified and directed. |
| 81 | S&F in repair 10 litre capacity PVC flushing cistern, valve less symphonic type low level or high level with inlet, ball valve float chains pull and brackets complete with flush pipe 32mm dia complete all as specified and directed. |
| 82 | S&F PVC connection 600mm long of dia 15mm complete complete all as specified and directed. |
| 83 | S&F in repair soap dish of 1mm thick stainless steel box type fixed with screws of size 150mmX150mmX100mm complete all as specified and directed. |
| 84 | S&F in repair 650mmX400mm size bevelled edge mirror of selected quality glass 5mm to 5.5mm thick mounted on 6mm AC building board or commercial ply wood and plastic framing fixed to plugs with CP brass screws and cup wahsers complete all as specified and directed. |
| 85 | Supply & fix 125mm size brass chromium plated shower rose fixing with 15mm dia pipe complete all as specified and directed. |
| 86 | S&F in repair tubular towel rail 20mm dia D type and 60cm long between flanges fancy type brass chromium plated complete all as specified and directed. |
| 87 | S&F in repairs 25 mm dia fancy type drapary curtain rods with and including suitable fancy type brackets to both ends as required fixed in repair complete all as spd and directed. |
| 88 | Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete al as specified and directed. |
| 89 | S&F 18 mm thick HDHMR board of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. |
| 90 | S&F 18 mm thick HDHMR board of single side rigid laminate of approved colour and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet, cupboard shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed. |
| 91 | S&F 12 mm thick HDHMR Board both side plain color fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed. |
| 92 | S & F Continuous (piano) hinges of 30mm Width of flaps (when open) , mild steel, bright finish or electrogalvanised |
| 93 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified. |
| 94 | S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified. |
| 95 | S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified. |
| 96 | S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, |
| 97 | M&L PCC type C-2 Mix 1:3:6 (40mm graded stone aggregate), 50mm thick in plinth protection/path finishing the surface even and smooth without using extra cement with joints filled with bitumen grade 85/ 25 and sand in equal proportions by weight complete all as specified and directed. |
| 98 | M&L for factory made Machine pressed precast concrete interlocking paver block any shape with grey cement and pigment and size conforming to IS 15658-2006 of 60mm thickness M-35 Grade complete all as specified and directed. |
| 99 | M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in Sub base finished even and rough complete all as specified and directed. |
| 100 | M&L sand filling under floor /over floor or in sand cushion under interlocking tiles including well ramming complete all as specified and directed |
| 101 | M&L for precast cement concrete Type B1 1:2:4 (20 mm graded aggregate) in appex stone/kerb stone with plain fair faces including chamfers, weathering throting etc and set in cement mortar 1:4 complete with joints to math size and shape as approved by engr-in-charge |
| 102 | Demolition of Brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 103 | M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed. |
| 104 | M & L in repair Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' of size 150x150mm complete all as specified and directed. |
| 105 | S&F factory made 50mm thk precast man hole cover , Size 1200mmx300mm |
| 106 | S&F factory made 50mm thk precast man hole cover , Size 600mmx300mm |
| 107 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 108 | M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper with 2mm thick white wall care putty and a coat of primer complete all as specified and directed. |
| 109 | M&L complete removal of existing treatement and applying two coats of oil bound distemper with 2mm thick white wall care putty and a coat of primer, old plastered or un-plastered surfaces on walls complete all as specified and directed. |
| 110 | Preparation of surfaces of plastered or unplastered new surfaces of ceiling/wall applying three coats of white wash incl Preparation of surfaces complete all as specified and directed. |
| 111 | M & L, preparation of old ceiling/wall surfaces and applying two coats of white wash complete all as spesified and directed. |
| 112 | M&L for prepartion of new plastered surfaces on walls and applying two coats exterior emulsion paint over one coat of Primer on walls complete all as specified and directed. |
| 113 | M&L for complete removal of existing treatment and applying two coats exterior emulsion paint paint on over one coat of primer on walls complete all as specified and directed. |
| 114 | Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling etc all as specified and directed. |
| 115 | M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor for one light/fan/bell point in and including NEW PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with PVC modular top cover plates of suitable size for mounting of modular type switches/sockets/regulators including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including cutting chases and making good the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engr-in-charge.Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii) -Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item. |
| 116 | M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light point controlled by 2 way and including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed. Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth. (iii) -Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item. |
| 117 | All as per Sl item No 115.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed. |
| 118 | All as per Sl item No 115.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed. |
| 119 | All as per item No.115.00 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board. |
| 120 | S & F in replacement of Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified. |
| 121 | S & F in replacement of Modular switch 2 way, 6 Amps, 1 module, 230 volts complete all as specified. |
| 122 | S & F in replacement of Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified. |
| 123 | S & F in replacement of Modular bell push switch 1 way, 6 Amps, 1 module complete all as specified. |
| 124 | S & F in replacement of Supply & fix in replacement of Call bell ding dong AC 230 volt single pole complete all as specified. |
| 125 | S & F in replacement of Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified. |
| 126 | S & F in replacement of Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified. |
| 127 | S & F in replacement of Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified. |
| 128 | S & F in replacement of ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed |
| 129 | S & F Lamp holder including LED bulb 9 W including flexible wire 0.5 Sqmm copper cable all as specified & directed by Engr-in-charge. |
| 130 | S & F in replacement of New generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge. |
| 131 | S & F in replacement of Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable all as specified & directed by Engr-in-charge. |
| 132 | M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqmm Copper conductor Earth wire shall be measured as one unit) Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring. |
| 133 | Supply and fix in repalcement of Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP54 protection complete all as specified & directed by Engr-in-charge. |
| 134 | Supply and fix in repalcement of MCB , SPN, 240 Volts ,40-63 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engineer-in-Charge. |
| 135 | Supply and fix in repalcement of MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge. |
| 136 | S & F MCCB, 4 Pole, 100 A, 16 KA for fixing in DB including proper thimble connection, thermal and magnetic release protection complete all as specified and directed by Engineer-in-charge. |
| 137 | Supply and fix in replacement of epoxy power coated MCCB distribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified by Engineer-in-charge. (Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimbles used for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size complete all as specified and directed by Engr-in-charge. |
| 138 | M & L in replacement of UNSV Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 all as specified and directed by Engr-in-charge. |
| 139 | S & F in replacement Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge. |
| 140 | S & F in replacement Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 9/10 W 6500K of capacity ,10 watt,2 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge. |
| 141 | Supply and fix in replacement of elegantly designed sleek surface mounted pressure die-cast aluminium LED luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver of capacity 12 W LED of 5000 K and making good the existing surface as per existing complete all as specified & directed. |
| 142 | XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core supplied & laid in replacement complete all as specified& directed by Engineer-in-Charge. |
| 143 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed. |
| 144 | Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm thick each layer of any kind of soil. |
| 145 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point. |
| 146 | Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm above with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed. |
| 147 | Cutting of hardstanding floor/wall for laying of cable including matching with suface by using cement concrete 1:2:4 type B-0 all as specified and directed. |
| 148 | Supplying & laying factory made unreinforced Precast concrete cable covers class LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables complete all as directed by Engr-in-Charge |
| 149 | Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed. |
| 150 | Taking down and refixing of ceiling fan after supply and replacement of rubber reel, round cover plate of size 6 inch of ceiling fan complete with ms split clamp two Nos, nuts and bolts complete all as specified and directed by Engr-in-charge. |
| 151 | Supply & fix Sheet metal enclosure suitable for fixing DB and Electric meter, factory made of size 60 x 60 x 18 cm made out of 1.6 mm thick MS sheet with double door, sutiable locking arrangements, powder coated, cutting chasing in wall and fixing and making good as per existing surface complete including removing old one, complete all as specified and directed by Engr-in-charge. |
| 152 | Supply and fix Exhaust fan AC single phase 230/240 v of size 250 mm sweep 900 rpm Engineering thermoplastic body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver complete all as specified and directed by Engineer-in-Charge. |
| 153 | Supply and fix Exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver complete all as specified and directed by Engineer-in-Charge. |
| 154 | Material and labour for making hole of suitable size for PVC exhaust fan 250 mm sweep in wall for grouting and making good the surface complete all as specified and directed by Engr-in-charge. |
| 155 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with MCB SPN 32 Amps, complete all as specified and as directed by Engineer-in-charge. |
| 156 | M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender