Tender For Repair To Flooring, Joineries, False Ceiling, Roofing Etc In Certain Bldgs In Tech Area Kaluchak And 23 Wing At Afs Jammu Under Ge(Af) Jammu
Tender Value
20 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
20 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Flooring, Joineries, False Ceiling, Roofing Etc In Certain Bldgs In Tech Area Kaluchak And 23 Wing At Afs Jammu Under Ge(Af) Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling framed work timber scantling 40 sq. cm and over in section , in any position complete all as specified and directed by Engineer-in-Charge |
| 2 | Dismantling framed work timber scantling in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section complete all as specified and directed by Engineer-in-Charge |
| 3 | Dismantling of wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed by Engineer-in-Charge |
| 4 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for and removing demolished material out of Defence Land as directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 5 | Demolition of reinforced cement concrete in any position not otherwise specifically provided and removing demolished material out of Defence Land as directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed by Engineer-in-Charge |
| 6 | S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including Dismantling of steel or asbetos cement sheet (corrugated/ semi corrugated etc) any Shape and any Size in wall or roof covering complete all as specified and directed by Engineer-in-ChargeNote:- work up to 10 m height. |
| 7 | S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screws including Dismantling of steel or asbetos cement sheet (corrugated/ semi corrugated etc) any Shape and any Size in wall or roof complete all as specified and directed by Engineer-in-Charge |
| 8 | S&F polycarbonate sheet 10mm thick any coloured with aluminium jointing strip including filling of silicon on joints, fixed with self tapping screws etc including Dismantling of steel or asbetos cement sheet (corrugated/ semi corrugated etc) any Shape and any Size in wall or roof covering complete all as directed by Engr In charge.Note:- Contractor self work will be Execute up to 10 m height. |
| 9 | M&L for rolled MS / steel tubular MS works as in roof trusses (framed) trussed, purlins ,post, rafters including distant pieces, cleats, flat iron for wind ties etc including cutting and welding required confirming to grade Fe 410-W grad quality 'B' complete all as specified and directed by Engr-in-Charge.Note : Design And Shape Approve By GE without Any extra Charge |
| 10 | M&L for MS Plates (plain or chequered) channels, square cut, notched chamfer or square cut or notched (ordinary and counter sunk) forming holes without any attachment with MS Gde Fe 410-quality 'B' complete all as specified and directed by Engineer-in-Charge |
| 11 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (inclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and confirming tto e 410-W (Gde E- 250) quality A fixing complete all as specified and directed by Engineer-in-Charge |
| 12 | S&F decorative hollow PVC wall panelling of quality approved by Garrison Engineer, manufactured from virgin rigid Poly Vinyl Chloride (PVC), having minimum thickness 5 mm and width as per manufacturer's standard, with tongue and groove interlocking arrangement, fixed true to line and level on aluminium/GI/PVC framework or on existing wall surface with approved adhesive, screws and fasteners complete. The panels shall be moisture resistant, termite proof, corrosion resistant, fire retardant/ self extinguising type ,smooth finished with decorative laminated/printed surface in approved shade and pattern by Engr-in-Charge. Joints shall be neatly finished with matching PVC corner trims, edge beads, end caps and other necessary accessories. The work shall include cutting, notching, fitting around openings, making good disturbed surfaces and all labour, materials, scaffolding and incidentals required for completion of work including Dismantling & removal of waste out of defence area of wall panelling (fibre, pulp, insulation, etc) or insulation board slabs/ blankets, of any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge |
| 13 | S&F PVC finishing trims, corner trims, edge beads, end caps, joining strips, H-joints, internal corner mouldings, external corner mouldings, skirting trims and other matching accessories of approved make, colour and shade conforming to the PVC wall panelling system, fixed true to line and level with approved adhesive, screws, fasteners or clips as recommended by the manufacturer. The work shall include cutting, mitring, fitting, jointing, finishing at corners, edges, openings and intersections, making good all junctions and providing a neat and uniform appearance complete. All labour, materials, tools, plant and incidental charges necessary for proper completion of the work shall be deemed included complete all as specified and directed by Engineer-in-Charge |
| 14 | M&L for Providing and fixing Exposed metal frame ceiling board with PVC Laminated gypsum ceiling tiles 10mm thick for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) including dismantling of existing false ceiling of any type and shape complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F in repair Gl frame work laid in true horizontal level Grid suspense system consisting of interlocking metal grid of size 600mm x 600mm made from powder coated hot dipped galvanized steel sections of 0.33 mm thick ( galvanizing @ 120 grams/ Sqm) consisting of :- Main T runner, Cross T, intermediate cross T & Perimeter wall angle etc all as per manufacturers specification including suspenders from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e with suitable fastners for trussed roofs, hanger wire as per manufacturers instructions upto 1000mm length. Galvanised iron perimeter wall angle with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing complete all as specified and directed by Engineer-in-Charge |
| 16 | M&L for Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6) including Demolition of brick/stone masonry built in cement mortar and removal from the site complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for Brick work Except bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6) including Demolition of brick/stone masonry built in cement mortar complete all as specified and directed by Engineer-in-Charge. |
| 18 | M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in Cement mortar 1:4 including Demolition of brick/stone masonry built in cement mortar and removal from the site complete all as specified and directed by Engineer-in-Charge |
| 19 | Hacking out old broken glass, n.exc 1.5 Sqm each (any thickness, size, quality or description) from wooden/ steel frames or stone, aluminium door/windows/ventilators , concrete or brick surrounds, glazed with putty or fixed with beads or any type all as specified and directed by Engr-in-Charge. |
| 20 | M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for slabs supported on wall, beams and columns, lintels, in floor, roofs, landings, balconies, canopies, deck slabs and in shelves, in chajjas door, windows, drain cover,manholes cover or similar works etc and the like ,complete including necessary formwork arrangements for the same complete all as specified and directed by Engineer-in-ChargeNote : Reinforcement shall be measured and paid for separately. |
| 21 | M&L for Steel reinforcement 10mm dia and over, TMT bars, cut to length, bent to shape required including, cranking, bending, spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed by Engineer-in-Charge |
| 22 | M&L for steel reinforcement 6 to 8mm dia and over, TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-Charge |
| 23 | Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete including removal all debries exceeding 50m but not exceeding 100m all as specified and directed by Engineer-in-Charge. |
| 24 | M&L for Rendering 10mm thick plastering on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar 1:6, complete all as specified and directed by Engr-in-charge. |
| 25 | M&L for Rendering 15mm thick plastering of brick work or concrete surfaces, other than fair face (without using extra cement) on walls in cement mortar 1:4 including WPC @0.20 ltr/50Kg of cement complete all as specified and directed by Engr-in-charge.Note: Cost of liquid water proofing admixture shall be included in this item |
| 26 | M&L for Rendering 5mm thick on fair faces on concrete surfaces/ ceiling, chajjas doors, windows, etc finished even and smooth (without using extra cement) on walls in cement mortar 1:3, complete all as specified and directed by Engr-in-charge. |
| 27 | M&L for preparation of new plastered surfaces and applying three coat of lime white wash on ceiling, complete all as specified and directed by Engineer-in-Charge |
| 28 | M&L for preparation of new plastered/ putty surfaces and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work on walls complete all as specified and directed by Engineer-in-Charge |
| 29 | M&L for Preparing new/old plastered surface and applying wall care putty of 1 mm thickness on surface to prepare the surface even and smooth complete all as specified and directed by Engineer-in-Charge |
| 30 | M&L Preparing new surfaces plastered or unplastered and Finishing walls with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade/ camoflage pattern (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as specified and approved by Engr-in-Charge complete all as specified and directed by Eng-in-Charge. |
| 31 | M&L for Complete removal of wall / ceiling existing treatment and applying 1mm coat of wall care putty as specified & directed by Engr-in-Charge ( Wall putty will be measured separately as per executed at site) & Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats all as specified and directed by Engr-in-Charge. |
| 32 | M&L for Complete removal of wall / ceiling existing treatment and Finishing walls with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade/ camoflage pattern (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as specified and approved by Engr-in-Charge complete all as specified and directed by Eng-in-Charge.Note: 1. Painting work up to 30 Mtr Height 2. All gaps and undulation surfaces filled with putty then make sufrces smooth without any Extra Cost. |
| 33 | M&L for prepration of new steel surface of any discription over 10 cm width or girth not otherwise and applying two coats of synthetic enamel paint over a coat of red oxide primer as described complete all as specified and directed by Engineer-in-Charge |
| 34 | M&L for preparation of old decorated steel surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge |
| 35 | M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection finished even & smooth without using extra cement laid in alternate bays n.exc 2 Sqm panel and joints filled with bitumen mastic 1:3 complete all as specified and directed by Engineer-in-Charge |
| 36 | M&L for Providing precast cement concrete for kerbs stone of PCC 1:2:4 Type B-1 20mm graded aggregate (of any section indicated), with plain fair faces, including chamfers, weathering's, throating etc. and set & jointed in CM 1:4 complete all as specified and directed by Engineer-in-Charge |
| 37 | M&L for Cement concrete, type D-2 (1:4:8) as in foundations, filling and mass concrete, sub base for flooring works, or similiar type of works using 40mm graded stone aggregates including provision of necessary formwork if required , complete all as specified and directed by Engineer-in-Charge |
| 38 | M&L coloured Non Skid ceramic tiles 7 to 8mm thick joint free (square /rectangular) are of each tile exc 0.18 Sqm but n.exc. 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured tiles cement to match with & incl 15mm thick screed bed or bedding layer with CM 1:6 complete including Dismantling floor, hearth or wall tiling/ stone slabs including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 39 | All as per Item No. 38 above but in vertical surfaces such as skirtings, dados and risers to steps etc including 10 mm thick rending in CM (1:4) complete all as specified and directed by Engineer-in-Charge |
| 40 | M&L Vitrified ceramic light shade tiles 8-10mm thick (square/rectangular) polished, area of each tile not exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:6 complete including Dismantling floor, hearth or wall tiling/ stone slabs including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 41 | All as per Item no. 40 above but in skirting over 10mm thick rendering in CM 1:4 complete all as specified and directed by Engineer-in-Charge |
| 42 | M&L for non-skid coloured ceremic tiles 7 to 8 mm thick joint free (Square /rectangular) area of each tile exceeding 0.06 Square metre but not exceeding 0.11 Square metre, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:6 coloured tiles including Dismantling floor, hearth or wall tiling/ stone slabs including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 43 | M&L for Glazed ceramic tiles in vertical surface such as skirting/ dados 300x200x7mm/ 350x 250x 7 mm/ 450X 300X 7mm as specified by Engr in Charge thick set and jointed in neat cement slurry and pointed in white or colour cement to match including over 10mm thick screed ement mortar 1:4 complete including Dismantling floor, hearth or wall tiling/ stone slabs including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 44 | M&L for Granite work 18-20mm thick (Table rubbed and polished) in cooking platforms, walls & gate up to 10 mtr height etc over 10mm thick screed bed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with old surfaces or shade including moulding of edges complete all as specified and as directed by Engr-in-Charge. |
| 45 | M&L 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sub base and flooring, etc. complete all as specified and directed by Engineer-in-Charge |
| 46 | M&L for 100 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in flooring, sub-floors, sub-bases, floors and pavings, etc laid in panels properly compacted finishing cement concrete surface even and smooth without using extra cement all as specified and directed by Engr-in-Charge. |
| 47 | M&L Machine cut kota stone slab in flooring 20 to 25 mm thick over and including 20mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed by Engineer-in-Charge |
| 48 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area n-exc 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in Charge. |
| 49 | Taking down chowkats or frames (without taking off shutter from shutter ) area exc 1.50 Sqm but n exc 4 Sqm quare metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in Charge. |
| 50 | Taking down shutter of any description (Wooden, PVC, Aluminium, WPC,etc) exc 1.0 sq.m but n.exc 2.00 sqm each complete all as specified and directed by Engineer-in-Charge |
| 51 | Taking down shutter of any description (Wooden, PVC, Aluminium, WPC,etc),not exc 1.0 sq.m each complete all as specified and directed by Engineer-in-Charge |
| 52 | M&L for Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion with cement concrete 1:2:4 type B1 cutting exc half brick but n-exc one brick complete all as specified and directed by Engineer-in-Charge |
| 53 | S&F Anodised aluminium frame for doors, windows, ventilators, Partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge |
| 54 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene beeding/packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. with complete necesssary fittings all as specified and directed by Engr-in-Charge. |
| 55 | S&F Anodised aluminium window and ventilator shutters, fixed type/ side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engineer-in-Charge |
| 56 | S&F Powder coated Aluminium with min thickness of coating 50 micron aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed by Engineer-In-Charge. |
| 57 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators of any type fixed/ side hung/ two track system/ three track system including providing and fixing hinges/ pivots/ rollers for sliding and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall besmooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 58 | S&F 4mm thick Aluminium Composite Panel (ACP) comprising two aluminium skins of minimum 0.25mm thickness each bonded to a polyethylene/mineral filled core, of approved shade, colour, texture and finish, fixed in aluminium framework/door shutter with necessary cleats, pressure beading, EPDM gasket, approved fasteners, screws and sealant as required. The ACP panel shall be cut to size, machine grooved, edge finished and fixed true to line and level complete in all respects. The rate shall include all materials, labour, cutting, fitting, wastage, handling and incidental works necessary for proper completion of the item complete all as specified and directed by Engineer-in-Charge |
| 59 | S&F in Repair Powder coated/anodised aluminum American handle cast type 200mm for doors complete all as specified and directed by Engineer-in-Charge |
| 60 | S&F Neoprene/ EPDM rubber gasket for fixing sheet glass complete all as specified and directed by Engineer-in-Charge |
| 61 | S&F Zinc alloy rollers for UPVC/Aluminium windows complete all as specified and directed by Engineer-in-Charge |
| 62 | S&F Zinc alloy rollers for UPVC/Aluminium doors complete all as specified and directed by Engineer-in-Charge |
| 63 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. |
| 64 | S&F steel mortice lock four levers (Harrisons / doorsel) vertical type size 100mm or above as directed by Eng-in -charge. |
| 65 | S&F for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed in repair including taking down carefully aluminium door without demaging any member/part and re-fixing the the same including easing complete all as specified and directed by Engineer-in-Charge |
| 66 | S&F for Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete all as specified and directed by Engineer-in-Charge |
| 67 | S&F rubber door seal 32mm wide and 1.5mm thick strip of mild steel with hard brush fixed with machine steel screw with washer in door bottom fixed in repair ccomplete all as specified and directed by Engineer-in-Charge |
| 68 | Repair & refixing in same position of aluminium anodised door shutters of any description, size exceeding 1.50 Sqm but not exceeding 4.00 Square Metre by taking down/without taking off shutters from the frame, disconnecting carefully shutter member with deligated tools and as per manufacture's instructions. Removing broken aluminium mongeries, tilted/deformed aluminium beads, teared T rubber gasket and cleats in hollow blocks of rails and retightening in same position with excessess sectional area steel screws incl tightening mild steel rod with nuts in hollow blocks of members of shutters of lock side rail and hinge side rails and reassembling shutter with old retrieved members carefully such as ACP panel/prelaminated board, tinted glass 5.5 mm thick in same situations and securing both side with S&F new rubber T gasket and aluminium beads to making the door air tight including refixing of old aluminum hinge, tower bolt, mortice lock, bolts, handle, door stoppers, hydraulic door closer and refixing shutters in same opening after assuring complete alignment etc. Repairing floor spring where provided including making good alignments. Also adjusting door chowkats and frame and refixing with new rowl plugs & 3 to 4\\" long standard steel flat headed screws and assuring the strength of chowkatS&Frames before refixing shutters etc complete all as specified and directed by Engineer-in-Charge |
| 69 | S&F for Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge |
| 70 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed by Engineer-in-Charge |
| 71 | S&F 2nd class HW plain solid straight chowkhats wrought framed rebated on the solid, rounded or chamferred / frame for wooden or particle board cabinets put together with glue pinned at joints and fixed on walls as per site requirements complete all as specified and directed by Engineer-in-Charge |
| 72 | S&F for factory made flush shutters 30mm thick shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated medium density, wood particle board with commercial face veneers fitted to chowkhat complete all as specified and as directed by Engineer-in-Charge. |
| 73 | S&F 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneered supplied & fitted to chowkat.complete all as specified and directed by Engineer-in-Charge |
| 74 | S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied & fitted to chowkats.complete all as specified and directed by Engineer-in-Charge |
| 75 | S&F 30mm thick for windows/ ventilators 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied & fitted to chowkats complete all as specified and directed by Engr-in-Charge. |
| 76 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made to contractor. |
| 77 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: steel butt hinges and necessary S.S screws shall be paid separately) |
| 78 | S&F in position uPVC windows of approved make and shade, manufactured from extruded multi-chamber uPVC profiles conforming to relevant IS specifications, comprising outer frame and sash/frame for fixed, openable (casement), sliding two-track and sliding three-track window systems, complete with all necessary reinforcements, corner joints, glazing beads (without glass), gaskets, EPDM/rubber weather seals, brush pile, rollers, hinges, friction stays, espagnolette/locking mechanism, multipoint lock, handles, tower bolts, cleats, screws, anchor fasteners, packing, sealant, silicon, fixing lugs and all other fittings and accessories required for proper operation, including cutting chases where necessary and making good disturbed surfaces complete, all as specified and directed by the Engineer-in-Charge.Note: The rate shall include the cost of complete uPVC frame, shutters and all hardware/accessories. Glass/glazing, glazing panels and stainless steel wire mesh/insect mesh shall be measured and paid for separately under the relevant items. Net opening alongwith frame will be measured for payment purpose.) |
| 79 | S&F in position uPVC doors / uPVC framework for partition of approved make and shade, manufactured from extruded multi-chamber uPVC profiles conforming to relevant IS specifications, comprising outer frame and sash/frame for fixed, openable (casement), sliding two-track and sliding three-track systems, complete with all necessary reinforcements, corner joints, glazing beads (without glass), gaskets, EPDM/rubber weather seals, brush pile, rollers, hinges, friction stays, espagnolette/locking mechanism, multipoint lock, handles, tower bolts, cleats, screws, anchor fasteners, packing, sealant, silicon, fixing lugs and all other fittings and accessories required for proper operation, including cutting chases where necessary and making good disturbed surfaces complete, all as specified and directed by the Engineer-in-Charge.Note: The rate shall include the cost of complete uPVC frame, shutters and all hardware/accessories. Glass/glazing, glazing panels and stainless steel wire mesh/insect mesh shall be measured and paid for separately under the relevant items. Net opening alongwith frame will be measured for payment purpose.) |
| 80 | S&F Toughned glass 10mm thick as in hinged doors, partitions automatic doors , frameless floorsprings doors, fixed in door frame and similar work including cutting to shape, drilling holes required all as specified and directed by Engr-in-Charge. |
| 81 | S&F for prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including wooden fillets at all sides finished smooth fixed with screws and hinges to timber frame work complete all as specified and directed by Engineer-in-Charge |
| 82 | S&F 100 mm long stainless steel butt hinges, medium weight and fixed complete all as specified and directed by Engineer-in-Charge |
| 83 | S&F 75 mm long stainless steel butt hinges, medium weight and fixed complete all as specified and directed by Engineer-in-Charge |
| 84 | S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed.complete all as specified and directed by Engineer-in-Charge |
| 85 | S&F 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed.complete all as specified and directed by Engineer-in-Charge |
| 86 | S&F 150 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed by Engineer-in-Charge |
| 87 | S&F 100 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed by Engineer-in-Charge |
| 88 | S&F Aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type), suitable for use with padlock and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudedsections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge. |
| 89 | S&F 300mm dia ordinary rat tail rod pattern springs of mild steel including roller and roller plate for skeletton door shutters ( having wire mesh complete |
| 90 | S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintel hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps,plate washers and similar small articles conforming to Fe 290-0 Gde E -165 complete all as specified and directed by Engineer-in-Charge |
| 91 | S&F Stainless steel wire cloth .0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel windows/ aluminium windows/ fixed with wooden beads supplied with joinery to wooden doors/windows complete all as specified and directed by Engineer-in-Charge |
| 92 | S&F in repair Stainless steel wire cloth .0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel windows/ aluminium windows/ fixed with wooden beads supplied with joinery to wooden doors/windows complete all as specified and directed by Engineer-in-Charge |
| 93 | M&L for Painting to new wood and wood based surfaces of any description exc 10cm with or girth with two coats of synthetic enamel paint over a coat of pink primer including preparation of new or previously untreated surface,complete all as specified and directed by Engineer-in-Charge |
| 94 | M&L for preparation of old decorated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge |
| 95 | S&F for in Repair PVC(SWR) 110mm dia with single socket joints fixed to wall with stack clamp fixed in repair (work at site upto 30 mtr height) or laid in trenches complete all as specified and directed by Engineer-in-Charge.Note: All arrangements to fix the pipe upto height of 30m will be done by contractor at no extra cost. |
| 96 | S&F for in Repair PVC (SWR) bend & shoes etc for 110mm dia pipe fixed in repair complete all as specified and directed by Engineer-in-Charge |
| 97 | S&F for in Repair PVC(SWR) 75mm dia with single socket joints fixed to wall with stack clamp fixed in repair (work at site upto 30 mtr height) or laid in trenches complete all as specified and directed by Engineer-in-Charge.Note: All arrangements to fix the pipe upto height of 30m will be done by contractor at no extra cost. |
| 98 | S&F for in Repair PVC (SWR) bend & shoes etc for 75mm dia pipe fixed in repair complete all as specified and directed by Engineer-in-Charge |
| 99 | S&F in repair PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge |
| 100 | S&F in repair 15mm bore medium grade galvanised tube with all fittings and fixed complete to walls and ceilings or laid in floors including taking down pipe all as specified and directed by Engr-in-Charge. |
| 101 | S&F in repair 20mm bore medium grade galvanised tube with all fittings and fixed complete to walls and ceilings or laid in floors including taking down pipe all as specified and directed by Engr-in-Charge. |
| 102 | S&F 1000 ltrs PVC rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) triple layered incl connecting up pipes securing access covers etc as including dismantling of water tanks all and removal to store outsidecomplete all as specified and directed by Engineer-in-Charge |
| 103 | S&F 500 ltrs PVC rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) triple layere incl connecting up pipes securing access covers etc including dismantling of water tanks all and removing to store outside complete all as specified and directed by Engineer-in-Charge |
| 104 | S&F for 3.00mm thick Plain glass sheet ordinary quality and glazing with oil putty/ wooden beads with nails in square not exceeding 0.5 Square metre in each pane etc complete all as specified and directed by Engineer-in-Charge |
| 105 | S&F for 3.00mm thick figured glass / frosted glass ordinary quality and glazing with oil putty/ wooden beads with nails/rubber bedding with connected fitting in square n-exceeding 0.5 Square metre in each pane etc complete all as specified and directed by Engineer-in-Charge |
| 106 | S&F 5.50 mm thick selected quality sheet glass / frosted glass of approved quality conforming to relevant IS specifications in aluminium doors, windows, ventilators, partitions or glazed shutters area not exceeding 1.50 Sqm, including cutting to size, edge finishing where required, fixing in position with approved quality EPDM/neoprene rubber gaskets, glazing beads, clips, packing pieces, screws and all other necessary accessories complete. The glass shall be properly seated, aligned and secured to provide a neat, weather-tight and rattle-free installation. The rate shall include all labour, tools, plant, handling, wastage, cleaning and incidental items necessary for completion of the work complete all as specified and directed by Engineer-in-Charge |
| 107 | S&F self-adhesive privacy/decorative window film or static cling film of approved make, colour, shade and pattern/ logo as specified by Engr-in-charge on existing glass surfaces of doors, windows, ventilators, partitions and other glazed panels, comprising polyester/PVC film with frosted, etched, translucent, coloured, plain or decorative finish as approved. The film shall be UV resistant, moisture resistant, non-fading and suitable for interior/exterior application, fixed strictly in accordance with the manufacturer's instructions after thorough cleaning and preparation of glass surface. The work shall include cutting to required size and shape, alignment of patterns, removal of air bubbles, trimming of edges, finishing complete and all labour, materials, tools, accessories and incidentals necessary for proper completion of work complete all as specified and directed by Engineer-in-Charge |
| 108 | S&F for aluminium die cast body door closed hydraulically regulated designation No. 2 universal type (ISI Make) suitable for door shutters of weight between 36 to 60 Kg fixed in repair/ new door complete all as specified and directed by Engineer-in-Charge |
| 109 | M&L for Vitreous china water closet, 'Orissa' pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete fixed in repairs , complete all as specified and as directed by Engr-in-Charge. |
| 110 | S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe complete all as specified and directed by Engineer-in-Charge |
| 111 | M&L for Viterous china wash basin, white flat back size 550 x 400mm including waste coupling CP 32mm dia and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP grating with holes fixed in repairs complete, all as specified and as directed by Engr-in-Charge. |
| 112 | S& F PVC connections 15 mm size with PTMT nuts of length 600 mm, fixed in repairs, complete all as specified and diected by Engr-in-charge. |
| 113 | S&F CP Gratings, fixed in repairs 100 mm dia with/ without waste pipe hole complete all as specified and directed by Engineer-in-Charge |
| 114 | S&F 32mm bore PVC waste pipe complete all as specified and directed by Engineer-in-Charge |
| 115 | S&F in repairs Angle valve cast copper alloy chromium Plated (CP) 15mm dia fancy type screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge |
| 116 | S&F in repairs 15 mm dia CP Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwedcdown, screwed for iron pipe or for brass ferrule andfixed fixed complete all as specified and directed by Engineer-in-Charge |
| 117 | S&F in repair 15mm pillar taps fancy type, cast copper alloy , with capstan heads, chromium plated, screw down high pressure with long screwed shanks and fly nuts, screwed for iron pipes.complete all as specified and directed by Engineer-in-Charge |
| 118 | S&F 5.0 mm thick superior quality mirror glass of approved make and quality, conforming to relevant IS specifications, fixed to wall surfaces in any position and at any height, including drilling holes in mirror, providing and fixing heavy-duty stainless steel/brass chromium plated mirror screws with decorative dome caps and PVC/neoprene washers at all sides/corners as required according to size of mirror, including necessary wall plugs, fasteners, backing pads, edge grinding/polishing of exposed edges, making good disturbed surfaces, sealing gaps with approved neutral silicone sealant where required,(for payment purpose mirror area will be calculated and no other fiitings paid separately) complete all as specified and directed by Engineer-in-Charge. |
| 119 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as spd and direcetd by Engg-in-charge. |
| 120 | Removing demolished material to a distance and depositing out site of AF station Where directed at a level not exceeding 1.5 KM above the starting point, complete all as specified and directed by Engineer-in-ChargeNote: All Material away from the Station as per Direction By GE. |
| 121 | SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender