Tender For Provision Of Shed Cover For Waiting Details In Front Of Rif Sml At Ncc Ota K Tee And Provision Of Termite Treatment In Bldg No. 6,10, 61, 34, 35, T-60, T-77, 49, 50,51 At Ncc Ota K Tee.
Tender Value
29.97 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
59940
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Shed Cover For Waiting Details In Front Of Rif Sml At Ncc Ota K Tee And Provision Of Termite Treatment In Bldg No. 6,10, 61, 34, 35, T-60, T-77, 49, 50,51 At Ncc Ota K Tee.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each n exc 0.50 cum, in any kind of soil getting out and removing surplus soil to a distance not exc 25 mtr and making good of surfaces complete all as specifed and directed. |
| 2 | Material and labour for PCC 1:3:6 type C2 (using 40 mm graded aggreate) in foundation, filling and mass concrete complete all as specified and directed |
| 3 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specifed and directed. |
| 4 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified and directed |
| 5 | M&L Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality B complete all as specifed and directed. |
| 6 | S&F for 11 to 15 mm Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specifed and directed. |
| 7 | S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed |
| 8 | Preparation of newly steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 9 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed. |
| 10 | M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specifed and directed. |
| 11 | M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base etc complete all as specifed and directed. |
| 12 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specifed and directed. |
| 13 | M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as specifed and directed. |
| 14 | M&L for Stone kerb of roughly squared stones of size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush complete all as specified and directed |
| 15 | M&L for Cement concrete1:2:4 type B-1 in copings, and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specifed and directed. |
| 16 | M&L for Post Construction ATT along thew external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc in apron, etc complete all as specifed and directed. |
| 17 | M&L for Treatment of soil under existing floors using emulsion @ one litre per hole , 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floors, complete all as specifed and directed. |
| 18 | M&L for Post Construction ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 lite/hole by drilling 6 mm dia holes at a ownward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specifed and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender