Tender For Special Repair To Earthing, Lightning Arresters, Feeder Pillar Boxes, Glow Sign Boards, Cabling And Allied Electrical Works At Electric Supply Mrs And Sub-Stations At Itarana Military Station Under Ge Alwar
Tender Value
40.74 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
14 days left
EMD
82000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Earthing, Lightning Arresters, Feeder Pillar Boxes, Glow Sign Boards, Cabling And Allied Electrical Works At Electric Supply Mrs And Sub-Stations At Itarana Military Station Under Ge Alwar
BOQ
| Sl. No. | Item Description |
| 1 | M&L for earthing to electric equipment/panels etc with and including galvanized MS earth plate electrode 600 x 600 x 6 mm thick, buried vertically in ground to a depth not less than 2.25 m below ground level, with top edge of earth plate not less than 1.50 m below ground level, as shown in Electrical Plate No. 3 of SSR Part-I, surrounded on all sides with adequate quantity of charcoal dust and salt packed to a thickness of 150 mm; including excavation and earthwork in any type of soil and removal of surplus soil up to 50 m, galvanized mild steel earth strip 32 x 6 mm as earth lead, welded to top of electrode and other end connected to equipment body/panel/test point by two Nos. nuts and bolts or by welding to steel structure; GI earth strip encased in and including 40 mm bore GI light grade pipe with all fittings from upper edge of earth plate up to 3.00 m above ground level, fixed along equipment body/panel with 25 x 3 mm FI clamps, bolts, nuts and washers; PCC chamber in 1:3:6 Type C1, MS funnel with wire mesh, 20 mm bore GI medium grade watering pipe, 75 mm thick RCC cover in 1:2:4 Type B1 on CI frame, complete all as specified and directed, including dismantling and taking out old existing unserviceable earthing. |
| 2 | S&F in repair single pointed air termination copper rod 12 mm dia x 300 mm long, securely fixed to earth strip with nuts and bolts, complete all as specified and directed. |
| 3 | S&F in repair test point terminal block of gun metal or phosphorus bronze, size 75 x 75 x 25 mm, drilled and screwed, including 3 Nos. 8 mm dia x 25 mm long hexagonal head screws, complete all as specified and directed. |
| 4 | S&F in repair aluminium strip 25 x 3.15 mm for roof conductor and down conductor on wall and other surfaces above ground, including saddles, fixing screws and all necessary fittings, complete all as specified and directed. |
| 5 | S&F in repair strip insulator suitable for 32 x 6 mm earth strip, including nuts and bolts and all necessary fittings, complete all as specified and directed. |
| 6 | S&F in replacement two-sided retro-reflective sign board of inner size 4 ft x 3 ft with outer frame including stainless steel tube 40 mm bore x 6 ft long for proper support of sign board, including foundation with PCC Type C2 in 1:3:6 using 20 mm graded aggregate, size 200 x 200 x 200 mm at both sides of stainless steel pillars; sign board printed with green colour retro-reflective/radium-based colour and laminated English alphabets with openable white background, including department logo on both sides, conforming to existing sample at site complete all as specified and directed. Notes: (i) Words, figures, numbers and logos shall be computer-aided machine cut. (ii) Rate shall include necessary scaffolding, hire charges of crane, earthwork, excavation, demolition and all incidental works required for fixing the sign board at the required height. |
| 7 | S&F in replacement glow sign board comprising PVC/acrylic sheet housed in angle iron frame box-type cover with GI sheet enclosure and 2 Nos. LED tube light fittings complete with accessories, overall size 16 ft x 1 ft width in semi-circular shape, including outer angle iron frame/stand and necessary supports for sign board; including foundation with PCC Type C2 in 1:3:6 using 20 mm graded aggregate, size 200 x 200 x 300 mm at both sides of MS angle pillars; sign board printed in blue and white colour combination with department logo on both sides as per existing sample at site; including taking down old unserviceable vinyl board, complete all as specified and directed. Note: Contractor shall visit the site before placing order and obtain approval for the matter/artwork to be printed. |
| 8 | S&F in schematic chart/informatory sign board for electric supply layout diagram for 11 KV MRS Sub Station building, size 2.00 m x 1.00 m, fabricated from suitable PVC sheet with single-side computer-aided printed lettering/diagram of suitable size and securely fixed/hung on wall, complete with necessary supports, fixing accessories and all incidental works, all as specified and directed. |
| 9 | S&F in schematic sign board depicting Electric Shock and its Management for 11 KV MRS Sub Station building, size 2.00 m x 1.00 m, fabricated from suitable PVC sheet with single-side computer-aided printed matter/diagram in suitable size lettering and securely fixed/hung on wall, complete with necessary supports, fixing accessories and all incidental works, all as specified and directed. |
| 10 | S&F in Do's and Don'ts Information sign board for 11 KV MRS Sub Station building, size 2.00 m x 1.00 m, fabricated from suitable PVC sheet with single-side computer-aided printed matter/illustrations in suitable size lettering and securely fixed/hung on wall, complete with necessary supports, fixing accessories and all incidental works, all as specified and directed. |
| 11 | Supply, laying, jointing and testing of XLPE insulated, armoured, heavy-duty LT underground electric cable with aluminium stranded conductor, 1100 Volt grade, 185 sq mm, 3½ core, laid in trenches/ducts, through pipes, under floors or roads, along poles etc., including all necessary handling, dressing, fixing and testing, complete all as specified and directed, including dismantling and taking out old unserviceable cable. Make: Havells/Grandlay/Polycab. Note: Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation/earthwork shall be measured and paid for separately. |
| 12 | Supply, laying, jointing and testing of XLPE insulated, armoured, heavy-duty LT underground electric cable with aluminium stranded conductor, 1100 Volt grade, 150 sq mm, 3½ core, laid in trenches/ducts, through pipes, under floors or roads, along poles etc., including all necessary handling, dressing, fixing and testing, complete all as specified and directed, including dismantling and taking out old unserviceable cable. Make: Havells/Grandlay/Polycab. Note: Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation/earthwork shall be measured and paid for separately. |
| 13 | Supply, laying, jointing and testing of XLPE insulated, armoured, heavy-duty LT underground electric cable with aluminium stranded conductor, 1100 Volt grade, 120 sq mm, 3½ core, laid in trenches/ducts, through pipes, under floors or roads, along poles etc., including all necessary handling, dressing, fixing and testing, complete all as specified and directed, including dismantling and taking out old unserviceable cable. Make: Havells/Grandlay/Polycab. Note: Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation/earthwork shall be measured and paid for separately. |
| 14 | Supply, laying, jointing and testing of XLPE insulated, armoured, heavy-duty LT underground electric cable with aluminium stranded conductor, 1100 Volt grade, 70 sq mm, 4 core, laid in trenches/ducts, through pipes, under floors or roads, along poles etc., including all necessary handling, dressing, fixing and testing, complete all as specified and directed, including dismantling and taking out old unserviceable cable. Make: Havells/Grandlay/Polycab. Note: Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation/earthwork shall be measured and paid for separately. |
| 15 | Supply, laying, jointing and testing of XLPE insulated, armoured, heavy-duty LT underground electric cable with aluminium stranded conductor, 1100 Volt grade, 16 sq mm, 4 core, laid in trenches/ducts, through pipes, under floors or roads, along poles etc., including all necessary handling, dressing, fixing and testing, complete all as specified and directed, including dismantling and taking out old unserviceable cable. Make: Havells/Grandlay/Polycab. Note: Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation/earthwork shall be measured and paid for separately. |
| 16 | Supply, laying, jointing and testing of XLPE insulated, armoured, heavy-duty LT underground electric cable with aluminium stranded conductor, 1100 Volt grade, 16 sq mm, 2 core, laid in trenches/ducts, through pipes, under floors or roads, along poles etc., including all necessary handling, dressing, fixing and testing, complete all as specified and directed, including dismantling and taking out old unserviceable cable. Make: Havells/Grandlay/Polycab. Note: Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation/earthwork shall be measured and paid for separately. |
| 17 | Excavation in trenches not exceeding 1.50 m in width and not exceeding 1.50 m in depth for foundations of poles/struts/stays, laying of cables, pipes etc., in soft/loose soil, including excavation, dressing of sides and bottom, getting out excavated earth and all incidental works, complete all as specified and directed. |
| 18 | M&L for dry sand cushioning and punning over/around underground electric cable, including supply, laying and proper compaction/punning to the required thickness, complete all as specified and directed. Note: For the purpose of payment, only the compacted/punned thickness shall be measured. |
| 19 | M&L for brickwork with fly ash building bricks conforming to IS 13757:1993 (old size bricks), laid dry and flat with width equal to the length of brick, bricks abutted against each other with gap between adjacent bricks not exceeding 10 mm, laid over underground cable for protection, including all necessary handling and incidental works, complete all as specified and directed. |
| 20 | Returning, filling in excavated earth, including spreading, leveling, watering and well ramming in layers not exceeding 250 mm thick, in soft/loose soil, complete all as specified and directed. |
| 21 | Removal of excavated soil/material to a distance not exceeding 50 m and depositing at the location directed, at a level not exceeding 1.50 m above the starting point, including all necessary handling and incidental works, complete all as specified and directed. |
| 22 | Boring of holes under road, pavement and hardstanding by trenchless technology using ultrasonic technique, including deployment of necessary machinery, equipment and accessories and providing HDPE pipe 80 mm dia suitable for 0.4 MPa working pressure, complete all as specified and directed. |
| 23 | M&L in replacement for galvanized iron tubing, 50 mm bore, light grade, ISI marked, including all necessary fittings and accessories, laid in trenches/under roads/drains or fixed to poles/walls with required size flat iron clamps 25 x 3 mm, complete with bolts, nuts and washers, for protection of LT electric cable, complete all as specified and directed. Make: Jindal/Prakash/Tata. |
| 24 | M&L in replacement for galvanized iron tubing, 80 mm bore, light grade, ISI marked, including all necessary fittings and accessories, laid in trenches/under roads/drains or fixed to poles/walls with required size flat iron clamps 25 x 3 mm, complete with bolts, nuts and washers, for protection of LT electric cable, complete all as specified and directed. Make: Jindal/Prakash/Tata. |
| 25 | S&F in replacement of old/broken prestressed concrete pole with steel tubular swaged pole, 9.00 m long, Type 410 SP-31, including dismantling and taking down old unserviceable prestressed concrete pole, providing and applying two coats of synthetic enamel paint in alternate black and yellow bands, 300 mm wide each, up to 1.20 m height from top of PCC coping/pedestal, and applying two coats of aluminium paint over one coat of aluminium red oxide primer to the remaining portion of pole, including marking of pole number and all necessary handling, fixing and incidental works, complete all as specified and directed. Note: Excavation and earthwork, PCC foundation and PCC coping shall be measured and paid for separately. |
| 26 | Demolition of cement concrete (unreinforced), of any description and in any position, including concrete in coping/pedestal of poles, transformer platforms and similar structures, including breaking, dismantling and removal of demolished material, complete all as specified and directed. |
| 27 | M&L for PCC 1:3:6, Type C2, using 40 mm graded stone aggregate, in mass concrete for foundations of poles, transformer platforms and similar works, including mixing, laying, compacting, curing and all necessary labour, materials and incidental works, complete all as specified and directed. |
| 28 | M&L for PCC 1:2:4, Type B2, using 20 mm graded stone aggregate, in coping concrete for poles, transformer platforms and similar works, including mixing, laying, compacting, finishing, curing and all necessary labour, materials and incidental works, complete all as specified and directed. |
| 29 | Supply, installation, commissioning and testing of lithium-based integrated solar street light, 40 Watt, comprising single metal/FRP body with inbuilt 44/46 Wp monocrystalline solar panel, lithium ferro phosphate battery, solar panel and charger integrated into the luminaire, battery rated 11.1/12.8 V, 42 Ah with inbuilt BMS, high-brightness W-LED having efficacy 160–180 lm/W, CRI > 0, colour temperature 6500 K, microcontroller-based charge controller-cum-driver, automatic dimming facility with PIR motion sensor and dusk-to-dawn operation; suitable for working temperature from (-)10°C to (+)55°C, approximate weight 10–12 kg, including adjustable MS clamp and bracket suitable for pole/wall mounting, with protection against short circuit, overload, reverse polarity and battery-related faults, complete with all necessary accessories, fixing arrangements, wiring, connections and incidental works, all as specified and directed. Make: Philips/Havells/Bajaj or equivalent approved by GE. Notes: (i) Contractor shall provide a minimum 3 years warranty and submit to GE at the time of execution. Contractor may obtain warranty/extended warranty from the manufacturer for the above period. |
| 30 | M&L in replacement of existing duct cover with mild steel chequered plate, 5 mm thick, 410-W Grade E-250 Quality-A, including cutting to required size, welding, lifting and arranging/fixing of duct cover in position, complete with necessary supports, fittings and all incidental works, including taking down old unserviceable duct cover, complete all as specified and directed. |
| 31 | M&L for spray painting of transformers/VCBs of any type, power or distribution, of any capacity, installed in situ at indoor/outdoor locations and at different/scattered sites under GE, including: (a) preparation of existing surfaces by cleaning, scraping, rubbing/polishing and making good the surfaces complete; (b) application of two coats of synthetic enamel paint of approved make and quality by spray painting method, complete; and (c) writing/marking of SM/MES No. of transformer/VCB on MS body in approved manner, including all necessary materials, labour, tools, equipment and incidental works, complete all as specified and directed. |
| 32 | M&L for spreading graded coarse aggregate of 40 mm nominal size in layers, including supply, transportation, spreading, leveling and all necessary labour and incidental works, complete all as specified and directed. |
| 33 | M&L for danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and cross-bones symbol in signal red colour, securely fixed with MS clamps, bolts and nuts of approved size, suitable for HT installations, size 25 x 20 cm, in repair, including all necessary fittings and incidental works, complete all as specified and directed. |
| 34 | Supplying and laying synthetic rubber insulating mat, 2.5 mm thick, suitable for electrical safety applications up to 11 kV, conforming to IS 15652:2006 (superseding IS 5424), size 2.00 m x 1.00 m, including cutting, laying, jointing where required and all necessary incidental works, complete all as specified and directed. |
| 35 | Supply, installation, testing and commissioning of automatic intelligent power factor correction (APFC) capacitor bank, LT, 3 phase, 440 V, 50 Hz AC system, suitable for automatic stepwise switching of capacitors to improve power factor from 0.80 up to 0.99 or unity, comprising floor-mounted outdoor type, weatherproof, dust/vermin-proof panel fabricated from 16 SWG MS sheet with 40 x 40 x 6 mm angle iron frame, factory-fabricated modular construction, duly powder coated in light grey colour, with front-openable panel shutters having locking arrangement for ease of maintenance, natural air-cooled type, cable entry from bottom with gland plate, including provision of PCC 1:3:6 Type C1 foundation, 450 mm below ground level and 300 mm above ground level all around panel legs, complete with CT for LT panel, 1 set, and all necessary internal wiring, busbars, terminals, control wiring, protection, mounting arrangements and accessories including taking down old APFC complete all as specified and directed. Capacity: 100 KVAR, comprising the following: (i) Incomer MCCB, 4 pole, 200 A, 36 kA – 1 No.; (ii) MCB, TP, 63 A, ‘C’ curve – 7 Nos.; (iii) Contactor, 3 pole, 25–63 A – 7 Nos.; (iv) Cylindrical type capacitor, 20 KVAR – 3 Nos.; (v) Cylindrical type capacitor, 15 KVAR – 2 Nos.; (vi) Cylindrical type capacitor, 5 KVAR – 2 Nos.; (vii) APFC relay, 7 stage – 1 No. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender