Tender For Annual Aluminum Partition Work, False Ceiling Work & Pvc Flooring Works Etc
Tender Value
16.94 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
50000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Aluminum Partition Work, False Ceiling Work & Pvc Flooring Works Etc
BOQ
| Sl. No. | Item Description |
| 1 | DOORS:Providing and fixing aluminium anodized openable doors/windows/ventilators in opening of aluminium partitions made of extruded aluminium section as approved by the Institute confirming to IS 733, IS: 1285 and IS: 1868 with shutter frame made from aluminium sections 47.62 x 44.45 x 1.55 mm (for top rail) 46.30 x 45.0 x 1.50 mm (for styles) 47.0 x 45.0 x 1.20 mm (for lock rail) and 114.30 x 45.0 x 1.50 mm (for bottom rail) including jointing with extruded aluminium cleats, neoprene weather stripping gasket and beveled edge beading /screws and partly covered with both sides laminated board 12 mm thick Eco/Greenply/ Archid or approved equivalent make of 3’0” heigh including all fittings of superior quality (decorative type) and approved make such as door handles, tower bolts, door stopper, concealed door lock, brass pivoter etc, complete including applying a coat of lacquer, duly fixed as per the directions of the Engineer-in-charge. With providing and fixing 5.0 mm thick transparent / translucent / one vision float glass sheets of good quality like Modi/Triveni or approved equivalent make. Rates are inclusive of powder coated aluminum sections ( minimum thickness of powder coating 50 micron and colour will be decided by Institute) |
| 2 | PARTITIONS: Providing and fixing anodized fixed door, windows, ventilators, partitions and like made out of extruded aluminum section as approved equivalent make confirming to IS:733, IS:1285 and IS: 1868 with peripheral members of size 63.50 x 38.0 x 1.2 mm and internal members of size 63.50 x 38.0 x 1.2 mm for internal members including jointing with extruded aluminum cleats, neoprene weather stripping gasket, beveled edge beading, screws and partly covered with both sides laminated board 12mm thick Eco/Greenply/ Archid or approved equivalent make of 3’0” height including applying a coat of lacquer, duly fixed as per the directions of the Engineer-in-charge. With providing and fixing 5.0mm thick transparent / translucent / one vision float glass sheets of good quality like Modi/Triveni or approved equivalent make. Rates are inclusive of powder coated aluminum sections ( minimum thickness of powder coating 50 micron and colour will be decided by Institute) |
| 3 | SLIDING WINDOW ( Two Track): Providing and fixing anodized aluminium sliding window made out of extruded aluminium section as approved by the Institute conforming to IS: 733 IS:1285 & IS:1868 with outer frame 63.6 x 38 x 0.90 mm and the bottom track frame of 'H' section size 45.00 mm x 1.3 mm and shutter frame of Aluminium interlock section and handle section of size 41.5 x 19 x 1.3 mm including Ball bearing rollers of superior quality guides locks including all fittings of superior quality such as handles, tower, bolts, hinges etc. Complete as per direction of Engineer in charge duly fixed in wall with 16 x 3.15 mm lugs 10 cm long embedded in C.Cblocks of 15 x 10 x10 cm size (CC 1:3:6) with bolts and nuts as required. With providing and fixing 4.0 mm thick transparent / translucent / one vision float glass sheets of good quality like Modi/Triveni or approved equivalent make Rates are inclusive of powder coated aluminum sections ( minimum thickness of powder coating 50 micron and colour will be decided by Institute) |
| 4 | ALUMINUM SLIDING WINDOW (Three Track): Providing and fixing anodized aluminum Three track sliding window made out of extruded aluminum section of conforming to IS: 733 IS:1285 & IS:1868 with outer frame 103 x 25 x 0.90 mm and the track frame of size 45.00 mm x 1.3 mm with providing and fixing two shutters of 4.0 mm thick transparent / translucent / coloured / one side vision float glass sheets of good quality like Modi / Triveni & one shutter using mosquito mesh of approve quality and bottom and top track size 103 x 19 x1.3 including Ball bearing rollers of superior quality guides locks including all fittings of superior quality such as handles, tower, bolts, hinges etc. Complete as per direction of Engineer in charge. Rates are inclusive of powder coated aluminum sections ( minimum thickness of powder coating 50 micron and colour will be decided by Institute) |
| 5 | Mosquito mesh frame: Providing and fixing fly proof window mesh of Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides fix between the frame made of Aluminum Z section size 41.5 x 19 x 1.3 mm with U channel of aluminum (number of intermediate horizontal member will be decided by Engineer-in-charge as per size of window and site conditions) as approved by the Institute conforming to IS: 733 IS:1285 & IS:1868 etc complete as per direction of Engineer in charge. Rates are inclusive of powder coated aluminum sections ( minimum thickness of powder coating 50 micron and colour will be decided by Institute) |
| 6 | Removing the existing aluminium partitions/doors from various locations as per the directions of the Engineer-in-charge |
| 7 | Refixing of old removed aluminium partitions/doors from various locations at desired palces including all material and labour required for cutting to required shape and size and refixing etc. complete as per the direcxtions of the Engineer-in-charge |
| 8 | Minor repairnig of existing Aluminum partitions, doors, windows. Mosquito mesh frame etc as required. |
| 9 | Providing and fixing hydraulic door closer ISI mark of brand Everite or approved equivalent make as per the directions of the Engineer-in-charge. |
| 10 | Providing and fixing 5.0 or 4.0 mm thick transparent/translucent glass sheets of good quality like Modi/Triveni or approved equivalent make in existing aluminum partition, doors, windows etc wherever required as per the directions of the Engineer-in-charge. |
| 11 | Providing and fixing both sides laminated board 12mm thick Eco/Greenply/Archid or approved equivalent make of any height including all fitting of superior quality (decorative type) in existing aluminum partition, doors etc wherever required as per the directions of the Engineer-in-charge. |
| 12 | PVC Flooring:- Providing and fixing wooden pattern P.V.C floor covering to Floors confirming to IS 3462-1986 Consisting of thoroughly blended composition of thermoplastic binder, filler and pigments, with an approved adhesive on floor including stretching, cutting and fitting etc. complete. 1.5 mm thick |
| 13 | Cement Fabric sheet false ceiling:- Providing and fixing false ceiling with frame work consisting of main and cross runners of anodized powder coated aluminum tees of sizes 38 mm x 25.5 mm x 1.5 mm or equivalent size of angles connected with the help of aluminum elbows/angles by means of screws/nuts and bolts of required size to form a grid of not more than 610 mm x 610 mm together with anodized powder coated aluminum angle of 38 mm x 38 mm x 1.5 mm size with teak wood plugs and M.S. screws 750mm center to center fixed to the walls and supporting the entire frame work with ceiling by means of 6 mm dia M.S. hangers space between roof and ceiling up to one meter bent to the required shape and M.S. holding cleats of M.S. flats 25 mm x 6 mm painted with one coat of red oxide paint complete of 1220 mm center to center on either direction and cutting R.C.C slab and repairing the same in C.M. 1:3 after hanging/connecting M.S. to the main reinforcement including supplying fixing over aforesaid frame with Cement Fabric design/texture ceiling tiles of 4 mm thickness of size 610 mm x 610 mm . Necessary cut outs for electrical connections, fans, lighting etc. shall be provided Complete as directed by Engineer- in- charge. Rates are inclusive of removing of old false ceiling and staking of serviceable materials in the Institute campus as directed. |
| 14 | POP false ceiling:- Providing and fixing suspended false ceiling at a height to be decided by the Engineer- in- charge which includes providing and fixing G.I. channels of size 25 x 0.5mm thick having on flange of 20mm and another flange of 30mm fixed along periphery of the ceiling screws fixed to brick wall partition with the help of rawl plug and screws for suspending G.I. intermediate channels size 45mm x 0.9mm with two flanges of 15mm each from the soffit at 1200mm Centre in one direction with steel G.I. hanger of width 25mm x 0.5mm thick fixed to the soffit with G.I. cleat and steel rawl plugs fasteners ceiling G.I. section of 0.5mm thickness forming hollow knurled wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm are then fixed to the intermediate channel with the help of connecting G.I. clips dia 2.64 mm and in direction perpendicular to the intermediate channels at 450mm Centre to Centre. Tapered edge Gypsum (12.5mm) will be screw fixed to ceiling section with 25mm dry wall screw at 230mm Centre to Centre. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally the tapered and square edges of the boards are jointed and finished to be blush finish with requisite requisite jointing compound, paper taps finisher and two coats of primer suitable for Gypsum plaster board (as per recommended practices of Indian Gypsum or equivalent), all complete as per the directions of the Engineer-in-charge |
| 15 | P/F plaster of paris cornice of size 2\\"x2\\" to 4\\"x4\\" as per design approved by Engineer-in-charge on gypsum board false ceiling. |
| 16 | Supplying and fixing Cement Fabric sheet ( thickness: 4 mm ± 1mm) / veneered partical board (thickness:12.5 mm ± 1mm) of size 2' x 4' or 2' x 2' false ceiling tiles of approved quality, in existing grid of GI channels with screws, matching the joints , correcting the existing tiles/frame in true line and level wherever required including all material and labour etc. complete as per the directions of the Engineer-in-charge. |
| 17 | Vertival / Roller Blinds:- Providing and fixing vertical blinds on existing windows of 100 mm width hang on C-channel of 50x35mm with movable and roatating mechanism ( Star rod and runner) with loop chain and string from any end of window complete. or Providing and fixing of Roller blinds Both side Coated with Blackout Fabric, Coating is of PU. Max. Width 2.50 M; with smooth operating roller rods of approved shade and quality. Colour of Blind will be decided by the Engineer-in-charge. |
| 18 | Rates of powder coated aluminum sections ( minimum thickness of powder coating 50 micron and colour will be decided by Institute) where ever required |
| 19 | CARPET FLOORING: Providing and fixing synthetic loop pile / Cut pile carpet of 6 mm thick. Colour of carpet will be decided by the Institute. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender