Tender For Upgradation And Providing Of Various Items At Phe Guest House New Plot Jammu, Under Capex Programme.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Aug 2026
6 days left
EMD
44000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation And Providing Of Various Items At Phe Guest House New Plot Jammu, Under Capex Programme.
BOQ
| Sl. No. | Item Description |
| 1 | (A) PLASTERING WORKS: 12mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand).L=65FT , H =7 FT=455 SQFTDEDUCT DOOR OPENING=17.5SQFTTOTAL=437.5SQFT |
| 2 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead.With cement mortar 1:4 (1 cement : 4 fine sand) |
| 3 | Making the opening for door/window/clerestory window in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground. |
| 4 | Demolishing brick work manually/by mechanical means includingstacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar |
| 5 | (B) PAINTING WORKS: Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etc. Complete Interior - 670sqm, Exterior - 457 sqm |
| 6 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick wherever necessary Interior - 100sqm, Exterior - 165 sqm |
| 7 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 8 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With water thinnable cement primer on wall surface havingVOC content less than 50 grams/liter |
| 9 | Finishing walls with 100% Premium acrylic emulsion paint havingVOCless than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.13.94.1 New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm |
| 10 | NEW BATHROOM: Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix) |
| 11 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil : |
| 12 | Providing,Laying, spreading and compacting stone aggregate of specified sizes in uniform thickness, hand picking, rolling watering and compactingIncluding all carriages and lifts upto the site of work complete job |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 14 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 15 | Supply and filling of dry stone soling in foundation,trunches/under floors tightly hand packed with hand ramming, dressing, watering including carriage of materials from source to site of work complete |
| 16 | Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 fine sand) |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 19 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 20 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50mm thick cement concrete flooring in 1:2:4 mix (1 cement : 2 sand: 4 stone agg.) |
| 21 | 12mm thick cement plaster in 1:4 mix ( 1 cement :4 sand) |
| 22 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. in six washrooms, corridor and kit |
| 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completein six washrooms, corridor and kitchenSize of tile 500x500 mm |
| 24 | (D) KITCHEN: Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 25 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.A) For thickness of tiles 10 mm to 25 mm |
| 26 | 12mm Cement plaster of mix: 1:4 on walls damaged by removing tiles |
| 27 | Providing and fixing thick ply wood in kitchen. including necessary nails of approved quality all complete job (Frame work to be paid separately). 10mm |
| 28 | Providing and fixing thick ply wood in kitchen. including necessary nails of approved quality all complete job (Frame work to be paid separately). 12mm |
| 29 | Providing and fixing of 1mm thick high quality decorative laminate/mica to be approved by Engineer-incharge including fixing the same on particle board with Fevicol Marine/Heat X as directed by Engineer Incharge |
| 30 | Providing & fixing of medium size auto close slide-on concealed hinges of standard make like Godrej, Hettich or any other equivalent make and for kitchen cabinets/cup board to be approved by engineer incharge |
| 31 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125mm |
| 32 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: 100mm |
| 33 | Providing and fixing powder coated telescopic drawer channels 300-500mm long with necessary screws etc. of standard make like Godrej or any other equivalent make complete as per directions of engineer-in-charge |
| 34 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete.100x10 mm |
| 35 | Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete:-Triple strip (Vertical type) |
| 36 | Providing and fitting of under counter stainless steel 304 grade baskets for drawers/corner cupboards including all allied fittings. |
| 37 | Providing and fitting of under counter stainless steel 304 grade baskets for cutlery cupboards including all allied fittings |
| 38 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250mm |
| 39 | Providing and fixing of ISI marked auto clean,powder coated black colour,inbuilt led lights filterless Kitchen Chimney of size 90cm having suction capacity of 1200m³/hr of standard make like Faber, Glen, Hindware etc. or any other equivalent make to be approved by Engineer Incharge. This item includes all fittings, fixtures,cables,wire and installation, commissioning charges including all carriages up to site (complete jo |
| 40 | Providing and fitting of 4 Burner toughened glasstop liftable brass burner gas stove with self ignition of reputed make and colour with OEM warranty of 5yrs and as per the directions of engineer in charge |
| 41 | Providing and fitting of Galavanised MS 8 mm outer diameter M-6 dash fastener 25mm long |
| 42 | Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite of any colour for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade for area of slab over 0.5 sqm. |
| 43 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in in superstructure above plinth level upto floor V level |
| 44 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 45 | Centering and shuttering including strutting, propping etc. and removal of form for Shelves (cast-in-situ) |
| 46 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 47 | (E) PLUMBING: Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 48 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back, for the reception of pipes and fittings. |
| 49 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid |
| 50 | Providing and fixing white vitreous china pedestal type (Europeantype/wash down type) water closet pan. |
| 51 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete:10 liter capacity -White |
| 52 | Providing and fixing of CP health faucet, Toilet Seat Jet for European type water closet complete |
| 53 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 54 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia |
| 55 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour:Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms. |
| 56 | Providing and fixing of compatible pvc pipe connectors(750mm each) with both side CP nuts and CP sheath for insulation. |
| 57 | Providing and fixing of CP angle valves of ISI marked Jaguar, Parko or equivalent make. |
| 58 | Providing and fixing of CP Bib Cock of ISI marked Jaguar, Parko or equivalent make. |
| 59 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 25mm OD(SDR-7.4) |
| 60 | Providing, Fixing, Testing & Commissioning uPVC SWR pipes (Type-B) for soil, waste, and vent conforming to IS 13592 along with all required fittings like tees, bends, cowls, crosses with or without access doors jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in R.C.C/brick work (slab/beam/wall) and making good the floors, beams and walls with cement mortar where required complete of outer diameter.(Soil/ Waste pipe) 75mm Dia |
| 61 | Providing, Fixing, Testing & Commissioning uPVC SWR pipes (Type-B) for soil, waste, and vent conforming to IS 13592 along with all required fittings like tees, bends, cowls, crosses with or without access doors jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in R.C.C/brick work (slab/beam/wall) and making good the floors, beams and walls with cement mortar where required complete of outer diameter.(Soil/ Waste pipe 110 mm Dia |
| 62 | Providing and fixing Floor Traps including all fittings required complete job 100m dia |
| 63 | Supply installation testing and commissioning of water heaters (Gysers) 50 litre capacity ISI marked |
| 64 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106gms. |
| 65 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 66 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 67 | Providing and fixing toilet paper holder C.P. brass |
| 68 | Providing and placing on terrace (at all floor levels) Triple layer protection polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 69 | Providing, fabrication and fitting of 3 No. Mild Steel stand (size 4'x4'x1' high) fabricated out of ISA 40x40x5mm forroof mounted water tanks. The stand shall be duly welded at joints. The job includes providing and laying of RedOxide primer after prope sanding and cleaning of all surfaces. |
| 70 | (F) WARDROBES: Dismantling of exixting 02 no.wooden almeerah of plywood make and safe stacking of the retreved material at a lead of 50 m or as per the directions of engineer in charge |
| 71 | Providing and fixing thick ply wood in kitchen. including necessary nails of approved quality all complete job Frame work to be paid separately):- 10mm |
| 72 | Providing and fixing thick ply wood in kitchen. including necessary nails of approved quality all complete job Frame work to be paid separately):-12mm. |
| 73 | Providing and fixing of 1mm thick high quality decorative laminate/mica to be approved by Engineer-incharge including fixing the same on particle board with Fevicol Marine/Heat X as directed by Engineer Incharge |
| 74 | Providing and fixing powder coated telescopic drawer channels 300-500mm long with necessary screws etc. of standard make like Godrej or any other equivalent make complete as per directions of engineer-in-charge |
| 75 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete.100x10 mm |
| 76 | Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete:-Triple strip (Vertical type) |
| 77 | Providing & fixing of medium size auto close slide-on concealed hinges of standard make like Godrej, Hettich or any other equivalent make and for kitchen cabinets/cup board to be approved by engineer incharge |
| 78 | Providing and fixing chromium plated brass handles with necessary screws etc. complete : 125 mm |
| 79 | Supply and fitting of SS cloth hanging hangers compelet with screws etc |
| 80 | Providing and fitting of Galavanised MS 8 mm outer diameter M-6 dash fastener 50mm long |
| 81 | Supply and fitting of 25mm SS cloth hanging rod with brackets compelet with screws etc |
| 82 | providing and fitting of 5mm thick 2x5 feet reflective mirror of reputed made to befitted on the face of wadrobe |
| 83 | (G) ELECTRIFICATION: P/F of lighting point in 1.0 sq.mm PVC insulated multi stranded copper conductor in PVC conduit, with 6 / 10 Amp piano type switch on modular plate. The job also includes P/F of 12 Watt polycarbonate rimless round LED ceiling light with allied fixtures . the job includes making of suitable size grooves in the wall to embed 25 mm pvc conduit |
| 84 | P/F of 5 – pin socket point of 6 Amp rating on modular plate complete with 1.5 sq mm PVC insulated multi stranded copper conductor in PVC conduit complete in all respects. the job includes making of suitable size grooves in the wall to embed 25 mm pvc conduit |
| 85 | P/F of heating point in 2.5 sq.mm PVC insulated multi stranded copper conductor in PVC conduit, with 16 Amp SS combine on modular plate. the job includes making of suitable size grooves in the wall to embed 25 mm pvc conduit |
| 86 | P/F of heating point in 4 sq.mm PVC insulated multi stranded copper conductor in PVC conduit, with 32 Amp SS combine on modular plate. the job includes making of suitable size grooves in the wall to embed 25 mm pvc conduit |
| 87 | P/F of modular type indicator point in 1.0 sq.mm PVC insulated multi stranded copper conductor in PVC conduit. the job includes making of suitable size grooves in the wall to embed 25 mm pvc conduit |
| 88 | Providing & fitting of 1200 mm sweep ceiling fan complete with necessary wiring in pvc conduit. The job also includes suitable rating switch and dimmer on modular plate. the job includes making of suitable size grooves in the wall to embed 25 mm pvc conduit |
| 89 | Providing & fitting of 300 mm sweep exhaust fan complete with necessary wiring in pvc conduit. The job also includes suitable rating switch on modular plate. (Havells/ Orient/ Bajaj). the job includes making of suitable size grooves in the wall to embed 25 mm pvc conduit |
| 90 | Providing and fitting of main panel fitted with 63A as incomer, 10A MCBs for lighting circuits of rooms (7 No ) , 16 A MCB for heating circuits (7 No ). The MCBs shall be mounted on a MCB distribution box 24 -way fitted in prefabricated steel panel board for central control of electrification. The job also includes P/F of 63A 2 POLE Single phase changeover switch . |
| 91 | Providing and fitting of 20 KVA fully automatic voltage stabilizer capable to work on an input of 135-290 Volts giving output voltage of 200-230 Volts. |
| 92 | Providing and Fitting of 25 SQM 2 core armoured and pvc insulated Aluminium cable for service line |
| 93 | Providing and fitting of wireless electronic door bell with bell push mounted on modular plated with range of 30 mtrs. |
| 94 | Providing and fitting of 1.5 ton 5 star dual invertor split Air conditioner , copper AI convertible 6 in one 4 way swing and HD filter with antivirus protection, ADC sensor, with cooling upto 55 degree celcius , stabilizer free operation within 120-290 Volts ,LED temperature display with 100% copper condensor tubes along with OEM warranty of 1yr on product, 5yrs on PCB and motor and 10yrs on compressor |
| 95 | Relocation of 02 No. AC'S from ground floor to 1st Floor along with its fitting, complete servicing in presence of Engineer in charge |
| 96 | (H) MAIN GATE: Providing and fitting of Double Shutter Mild Steel Gate (Swivel Type) of size 14'x7' fabricated out of MS Hollow rectangular section of size 100mmx25mmx3mm thick as per enclosed drawings. The job further includes all allied accessories like handles, aldrops, hinges, bolts, nuts, locking mechanism etc. |
| 97 | Primering with synthetic metal primer solution of approved brand and manufacture after proper sanding. |
| 98 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 99 | Lettering with black Japan paint of approved brand and manufacture per letter per cm height as per directions of the site Engineer. |
| 100 | (I) MISCELLANEOUS: Providing, fabrication and fitting of 08 No rain guard canopies (each of size: 48\\" long and 18\\" width) over the existing windows for protection against rain water. The job includes providing and fitting of framework fabricated out of ISA 25x25x2mm and fastening the same on the building walls over the windows. The job includes painting and priming of steel framework. The job further includes providing and fitting of 0.5mm thick powder coated CGI roofing sheets duly fastened with self drilling screws of suitable sizes. The job includes all allied fittings and accessories. |
| 101 | Providing/Supply of 14\\" Electric Rotary Lawn Mower/Grass Cutting Machine with 35 litre catcher box of standard make like Bosch, Falcon etc. or any other equivalent make to be approved by Engineer Incharge. Item includes all carriages up to site. |
| 102 | Supply of Garden Hose of dia 3/4\\" and length 100ft, Ultra-Light Flexible Rubber alongwith Brass Fittings |
| 103 | Supply& installation of 02 No. 06 kg capacity ABC Type Fire Extinguishers with welded cylinder, Squeeze lever discharge valve fitted with pressure indicate gauge, internal discharge tube, discharge hose with nozzle, suspension bracket, duly charged with ISI Marked Mono Ammonium Phosphate base ABC Powder Conforming to IS : 14609 with temperature ranging from 0° C to 55° C |
| 104 | Supply of double person wooden bed foldable type duly finished with walnut colored polish. MOC Frame work: Sheesham wood or equivalent. (Thickness 40 mm min) MOC top and back: 19mm Ply board MR Grade |
| 105 | Supply and Installation of Microwave Oven with energy consumption 900 Watts, capacity 27 litres, countertop installation type, convection cooking mode, 230 Volts supply, defrost system, left door orientation, stainless steel body and inner material, complete with 01 year OEM/Office service warranty. |
| 106 | Supply and Installation of Frost Free Double Door Refrigerator of capacity about 250 litres, 3 Star rating, stabilizer free operation, with Convertible 5‑in‑1 mode, Digital Inverter technology, and 10 years warranty on compressor. |
| 107 | Supply of 9 Kg capacity 5 Star power rating 12 Wash Programs : Daily | Heavy | Delicate | Whites | Stainwash | Anti-Bac | Woollens | Bedsheet | Eco Wash | Rinse + Dry | Dry Only | Wash Only Fully Automatic Top Load Washing Machine alongwith water proof cover |
| 108 | Supply of 230V/ 750W Juicer Mixer Grinder with Powertron Motor with 3 Stainless Steel Jars with 1 year onsite warranty. |
| 109 | (J) CARRIAGE OF MATERIALS: Carriage of material from different sources to actual site of work by mechanical transport. Sand, stone aggregate below 40 mm nominal size with average laed 20km |
| 110 | (J) CARRIAGE OF MATERIALS: Carriage of material from different sources to actual site of work by mechanical transport. Cement and steel average lead 10km |
| 111 | (J) CARRIAGE OF MATERIALS: Carriage of material from different sources to actual site of work by mechanical transport. Bricks with a lead upto 20km |
| 112 | Arrangment of Mason, Carpenter, Labour for repairing of old existing infrastructure as per requirement at site: Mason |
| 113 | Arrangment of Mason, Carpenter, Labour for repairing of old existing infrastructure as per requirement at site: Carpenter |
| 114 | Arrangment of Mason, Carpenter, Labour for repairing of old existing infrastructure as per requirement at site: Labour |
| 115 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender