Tender For Development And Renovation Of Radha Krishan Temple (Prachin) At Thanamandi Rajouri 2Nd Call
Tender Value
1.09 Crore
Estimated cost
Bid Submission
25 Aug 2026
4 days left
EMD
2.19 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development And Renovation Of Radha Krishan Temple (Prachin) At Thanamandi Rajouri 2Nd Call
BOQ
| Sl. No. | Item Description |
| 1 | Carefully Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In lime mortar |
| 2 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead |
| 3 | Raking out joints of stone masonry surface to the required width and depth, with due care and precaution by mechanical/manual means including preparing and cleaning the surface for re-pointing / refilling ofjoints, including disposal of rubbish to the dumping ground within 50 mtrs lead. |
| 4 | Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like:Lime mortar 1:1:1 (1 Lime putty: 1 Surkhi: 1 Fine sand) |
| 5 | Ruled/ Flush pointing on Red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi):1/2 marble dust ( the rate is inclusive of all materials and labours involved except scaffolding) |
| 6 | Stone work, ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1Cement: 6 coarse sand) including pointing with white cement mortar 1:2 (1 White cement: 2 Stone Dust) with an admixture of pigment matching the stone shade and curing complete.White sand stone |
| 7 | Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 Coarse sand) including pointing in white cement mortar 1:2 (1 cement : 2 Stone dust) with an admixture of pigment matching the stone shade, Jali slab without any chamfers etc and curing complete.White sand stone |
| 8 | Applying two or more coats of Ethyl silicate chemicals as approved by Archaeological survey of India/ Engineer-in-charge, of approved brand and manufacturer, with brush or spray on the existing stone masonry surface till there is no further absorption of chemical by stone surface, including protecting the applied surface from direct sun light by suitable means during application, all complete as per direction of the Engineerin-charge ( the rate is inclusive of all materials and labours involved except scaffolding) |
| 9 | Applying breathable, non-reactive antifungal and water repellant silane/ Siloxane chemical as approved by Archaeological survey of India/ Engineer-in-charge, of approved brand and manufacturer, diluted with solvent mineral turpentine oil in the ratio of 1:12 ( 1 part of approved Chemical :12 part of turpentine oil), on the existing sand stone masonry surface with two or more codes to given uniforms application of chemical on the surface all complete as per direction of Engineer-incharge ( the rate is inclusive of all materials and labours involved except scaffolding) |
| 10 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 11 | De vegetation from the monuments by chemical injection of Round Up (arsenic base) compound and subsequently uprooting of all girth and any height by physical means without damaging the historic fabric and structure of the building under strict supervision of conservation architect/site in charge, removal of rubbish upto a distance of 50 m outside the periphery of the area cleared complete. |
| 12 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping groundwithin 50 meters lead. Garah Griha |
| 13 | Lime plaster 15 to 40 mm thickness on wall/flat vertical surfaces Providing and application of Lime – surkhi Plaster 1:1 (1 slaked Lime: 1 surkhi) on wall surfaces of thickness between 15 to 40 mm including organic additives like sugarcane molasses, extracts of beil,maithi, etc. as per traditional practices. The preparation of mortar is to be done following traditional practice includes using chakki/garat (wet grinding of lime and sand by heavy stone mill / chakki/garat), application of mortar in 3 layers with last layer of 6 MM thick, with a gap of minimum 3 days and not more than 10 days from previous layer. The item rate includes application of Loi, tampering, beating, reworking of plaster till the shrinkage cracks disappear and desired finish achieved and curing for 10 days. Item also includes all lead and lift, establishing work yard / chakki, scaffolding, formwork tools and implements etc. Garah Griha |
| 14 | Decorative plaster work in lime surkhi mortar (1:1) as per traditional practice and design, the mortar should be prepared by the grinding mill only. The thickness varying from 10 mm to 100mm as per design, as directed by Engineer incharge/ Architect, and including all leads, lifts and carriage. All complete. Qtyvide item no 13 @ 40 % |
| 15 | Providing lime kara on decorative/ornamental surfaces/stucco or embellishments as per decorative /ornamental designs as per old existing carving on surface highly precise. Providing and applying lime Kara 1:1 (1 lime : 1 zikka powder ) grinding or with grinding mill/ mannually on lime base in two coats on decorative ornamental surfaces , first coat applying 3mm to 4mm thick and curing properly at least 7 days and finishing coat done after 7 days of previous coat as per traditional Practise thickness not more than 6mm. Garah Griha |
| 16 | Traditional brick masonry with special brick size in lime mortar in propotion similar to the existing traditional lime mortar (lime putty -surkhi 1:2) after removing the damaged and out of plumb masonry from the historic structure, as directed by Engineer incharge/ Architect, and including all leads, lifts and carriage. All complete. Brick masonry for arches with special size traditional bricks |
| 17 | Stitching the cracks in brick masonry using brick and lime mortar matching the traditional lime mortar and bricks as existing in the historic structure after raking, cleaning and washing the cracks, as directed by Engineer incharge/ Architect, and including all leads, lifts and carriage. All complete. |
| 18 | 40 mm thick fine dressed and rubbed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand), with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixture with pigment to match the shade of stone and pointing with the same mortar and curing complete.White sand stone. |
| 19 | Extra for pre finished nosing in treads of steps of kota stone/ sand stone slab. |
| 20 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 21 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete Second class Kail wood |
| 22 | Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 1st class deodar wood |
| 23 | Providing and fixing ceiling in Circular opening including cutting with:20 mm thick 1st class Deodar Wood planks |
| 24 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 meters lead :Of area beyond 3 sqm. Door, Windows |
| 25 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class deodar wood Door,Arches |
| 26 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). |
| 27 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.First Class deodar wood |
| 28 | Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with First class deodar wood |
| 29 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 30 | 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) |
| 31 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: 13.57.1 Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 32 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive |
| 33 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Sand lead up to 145 kms avg. |
| 34 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Lime lead up to 145 kms avg. |
| 35 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Surkhi lead up to 145 kms avg. |
| 36 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Stone lead up to 15 kms avg. |
| 37 | Carriage of materials by manual labour including loading / unloading and stacking complete. Sand lead up to 100 mtr avg. |
| 38 | Carriage of materials by manual labour including loading / unloading and stacking complete. Lime lead up to 100 mtr avg. |
| 39 | Carriage of materials by manual labour including loading / unloading and stacking complete. Surkhi lead up to 100 mtr avg. |
| 40 | Carriage of materials by manual labour including loading / unloading and stacking complete. Stone lead up to 100 mtr avg. |
| 41 | Extra for intricate hand carving to deodar doors, fascia, brackets, Capital etc |
| 42 | Hand-carved Deodar verandah columns/posts with capitals, brackets and base |
| 43 | Traditional Brass Kalash, amalakaka/final elements and flag mast assembly |
| 44 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 45 | Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size) |
| 46 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 47 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 48 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 49 | Reinforcement for RCC works including straightening, cutting, bending, placing in position and binding all complete all work up to plinth level and above plinth level , Thermo-Mechanically Treated bars of grade Fe-500D or more., |
| 50 | Centering and shuttering including strutting, propping, etc and removal of form work |
| 51 | suspended floors,roofs,landings,balconies and access platforms, stairs and spiral stairs cases. |
| 52 | edges of slabs.(under 20 cm) |
| 53 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 54 | Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 55 | Providing and fixing laminated flush door shutter with frame including all accesseries (NSI) |
| 56 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm |
| 57 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 58 | 15mm Cement plaster on the rough side of single or half brick wall ofmix: 1 : 6 ( 1 cement : 6 fine sand) |
| 59 | 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand) |
| 60 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 61 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 62 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 63 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 64 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:1 Semi rigid pipe 32 mm dia |
| 65 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm |
| 66 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. |
| 67 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 68 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 69 | Providing and fixing on wall face un-plasticized Rigid PVC rain waterpipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes110 mm diametre |
| 70 | Providing and fixing on wall face un-plasticized Rigid PVC rain waterpipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 75 mm diametre |
| 71 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 72 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. |
| 73 | 15mm nominal outer dia pipes |
| 74 | 20mm nominal outer dia pipes |
| 75 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 76 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 77 | Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete. |
| 78 | Sand for an average distance of 145 kms by M.T & 100 Mtr by H.L |
| 79 | Stone aggregate below 40 mm nominal size for an average distance of 45 kms by M.T &100Mtr by H.L |
| 80 | Bricks for an average distance of 145km by M.T and 100 Mtr by H.L |
| 81 | roviding consultancy services for architectural, structural and conservation works including preparation/review of drawings, detailed estimates, specifications, site inspections, technical advice and supervision for renovation/conservation of the existing heritage Radha Krishna Mandir, complete in all respects Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender