Tender For Development Of Tourist Facilitation Centre At Mohan Marg By Way Of Providing Gate, Completion Of Fencing, Electricity, Water Supply Etc Under Capex Budget 2026-27.
Tender Value
21.97 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
2 days left
EMD
43940
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Tourist Facilitation Centre At Mohan Marg By Way Of Providing Gate, Completion Of Fencing, Electricity, Water Supply Etc Under Capex Budget 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | P/L, of dry stone soling duly hand packed for foundation and backfilling with ramming, dressing, and compacting all inclusive leads, lifts, loading, un-loading, cost and carriage of material involved complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all complete. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) all complete. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. |
| 6 | 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) complete. |
| 7 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 8 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm all complete |
| 9 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 10 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. |
| 11 | Providing and fixing 35mm thick glazed shutters for windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws incl. c/o. touch wood. Imported wood incl. all carriages etc complete |
| 12 | Providing and fixing of 35mm thick Wire Guaze shutters using galvanized M.S. Wire Guaze of average width for aperture 1.4mm in both directions with wire of dia 0.63mm for Windows and Clerestory Windows and including ISI marked M.S pressed butt hinges/bright finished butt hinges of required size with necessary screws. incl. headload (Imported Wood) with all carraige upto site of work complete. |
| 13 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.(completejob) |
| 14 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With 2nd class teak wood beading 62x19 mm all complete. |
| 15 | Providing and fixing of glazing in doors, windows, ventilator shutters and partations etc with necessary beading complete as per the architectural drawings and the directions of EIC, with floating glass panes of 4.0mm thick (weight not less than 10.00kg/sqm) all complete. |
| 16 | Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. |
| 17 | P/f of ready made imported wooden panelling of approved brand and manufacture ,approved thickness and make incl. frame work of budloo wood fixed at a distance of 1'-6\\" c/c in both directions complete incl. cost of scaffolding with all necessary fittings/fixtures nails/beadings and polishing with touch wood, polishing all complete. |
| 18 | Cleaning of inside premises of the buildings with chemicals and use of manual labours all complete as per directions of EIC. |
| 19 | Engagement of skilled and un-skilled labours for repair of doors and windows incl. all necessary fittings all complete. |
| 20 | Engagement of JCB for clearing of debris and levelling as per directions of EIC all complete. |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work (Steel work) incl. priming coat. |
| 22 | Providing and fixing of PVC fittings for PVC pipes of approved quality and make( prince B type) incl. all necessary fittings/fixtures all complete. 100mm dia PVC Pipes |
| 23 | 75mm dia PVC Pipes |
| 24 | P/F of C.P fittings of approved brand and make (Cera, Jaguar,Hindware ) or equavallent brand including all necessary fittings/Fixtures incl. carriages, handling etc all complete. 15mm Angle Valve |
| 25 | 2-way 15mm Bib cock |
| 26 | Wall Mixer |
| 27 | Bib Cock |
| 28 | Soap Case |
| 29 | CP Connection |
| 30 | Providing and fixing 50 liter capacity water heater Gyser of approved brand of jaquar/Venus/ Recold or any equivalent brand including its fixing at desired position complete in all respects. |
| 31 | Stainless steel Sink Mixer |
| 32 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510mm bowl depth 200mm |
| 33 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White all complete. |
| 34 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 35 | Providing and fixing of Almunium Hardware fittings of standard quality :- Tower Bolt 4\\" (Heavy Duty) |
| 36 | Handle 4\\" |
| 37 | L Drop |
| 38 | Air Hooks |
| 39 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 40 | Engagemant of Carpenter for tepairing of Truss all complete. |
| 41 | Providing/Fixing of 0.50mm thick Colour coated (Hi-Rib) profile sheets for roofing including vertical/curved surface fixed with Polymer coated J or l hooks, bolts and nuts 8mm diameter with bitumen and G.I Limpet washers or with G.I Limpet washers (0.50mm thick with zinc coating not less than 275g/sqm) including ridges,hips,valleys and carraiges of materials involved upto site of work complete. |
| 42 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:3 (1 cement : 3 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (18mm thick) (Granite of any colour or shade as approved by Engineer-incharge). (a) Area of Slab upto 0.5 sqm. |
| 43 | Construction of Kitchen quanters in 1:1.5:3 (2\\" thick) including reinforcement all complete 2'10\\" high with brick masonry pillars 9\\" thick with plastering all complete as per directions of EIC. |
| 44 | Carriage of Material Sand/Stone agg. For an avg. lead of 10 Kms. |
| 45 | Electrification |
| 46 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge ) single core cable in surface / recessed medium class PVC conduit, ( excluding the cost of conduit), complete, with modular switch Antibacterial series ( Legrand /ABB / Siemens make.), modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 47 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor ( Havell/Polycab/ paraflex/ Anchor/equivalent as directed by engineer incharge.)single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. |
| 48 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge ) single core cable in surface/ recessed PVC conduit ( excluding the cost of conduit), as required. |
| 49 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,modular plate, suitable GI box , connections etc. as required. Modular Switch & Socket:- Antibacterial series ( Legrand /ABB / Siemens make.) |
| 50 | Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge )) single core cable in surface/recessed medium class PVC conduit.(( excluding the cost of conduit), complete |
| 51 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, Antibacterial series ( Legrand /ABB / Siemens make.)connections etc. as required. |
| 52 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- Antibacterial series ( Legrand /ABB / Siemens make.) |
| 53 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required.Antibacterial series ( Legrand /ABB / Siemens make.) |
| 54 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge ), single core cable in surface/ recessed medium class PVC conduit as required.( excluding the cost of conduit), complete |
| 55 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 56 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 57 | 2 X6 sq. mm + 1 X 6 sq. mm earth wire |
| 58 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 59 | 2 X 16 sq. mm + 1 X 6 sq. mm earth wire |
| 60 | Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required |
| 61 | Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete |
| 62 | 25 mm |
| 63 | 32 mm |
| 64 | Supplying and fixing following modular switch/ socket Antibacterial series ( Legrand /ABB / Siemens make.) with modular plate and cover including switch box and connections etc. as required. |
| 65 | 5/10 amps switch |
| 66 | 15/16 amp switch |
| 67 | 3 pin 5/10 amp socket outlet |
| 68 | 6 pin 15/20 amp socket outlet |
| 69 | Bell push/ indicator |
| 70 | Supply and fixing of 25mm wide Medium Class PVC Casing & Capping (FRLS type) with necessary accessories such as saddles, couplers, tees, bends, and junction boxes, complete as per specifications. |
| 71 | Supply and fixing of wooden channel/ casing made from Kashmiri Budloo wood having2.6\\"- 3\\" width suitable for carrying out wiring for different circuits. |
| 72 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).(legrand / Schinider/ L&T ./ABB/equivalent standard make as directed by engineer incharge.) |
| 73 | 6 way (4 + 18), Double door |
| 74 | Supply installation testing and commissioning of 15 W + LED Surface/recess, Mounted light luminary fitting,square or round shape with minimum system lumen efficacy ≥ 120 lm/Watt with Pressure Die cast Aluminium Housing and Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Helonix/Wipro / Regent make / sample to be approved before installation.. |
| 75 | S/F testing and comm. Of surface mounted LED Batten 20 watt-22 watt +- 1watt commercial series (cool/warm) 4 ft. with minimum system lumen efficacy of ≥ 120 lm/Watt with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. Philips/ Helonix /Wipro make. sample to be approved before installation. |
| 76 | Supplying, installation, testing and commissioning of Decorative Wall Light fitting of Philips / Wipro / Jaquar or equivalent approved make, suitable for aesthetic indoor illumination in galleries, lobbies, corridors, or display areas, complete with LED light source and all required accessories for proper installation and operation.Technical Specifications:Type: Decorative Wall Mounted Luminaire (indoor type)Light Source: Integrated LED or LED lamp with holder (as per design)Wattage: 10W to 25W (as required)Input Voltage: 220–240V AC, 50 HzColour Temperature (CCT): 3000K / 4000K (Warm / Neutral White as specified)CRI (Colour Rendering Index): ≥80Housing: Die-cast aluminium / glass / polycarbonate with high-quality decorative finishFinish / Colour: Chrome / Matt / White / Designer finish (as approved)Mounting: Wall-mounted type with concealed wiring connection boxProtection Class: IP20 or higher, suitable for indoor useAccessories: Mounting brackets, fasteners, connector block, and other hardware complete in all respects.Make: Philips / Wipro / Jaquar / equivalent approved by Engineer-in-Charge. |
| 77 | S/F testing and comm. Of MCB's 10 kA of the below mentioned capacities in sub main controls legrand C curve/ Schinider Acti 9/ L&T ./ABB make as directed by engineer incharge. |
| 78 | a) 6-32 Amp SP MCB |
| 79 | b) 40-63amp DP MCB |
| 80 | Supply installation testing and comm. Of 200-250mm sweep exhaust fan Shutter type of havell /Bajaj/Crompton make as directed by engineer incharge, including making of space in wall/ window as per site requirement and necessary connections. |
| 81 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete . USHA /Havells /Crompton/orient make as directed by engineer incharge. |
| 82 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.Antibacterial series ( Legrand /ABB / Siemens make.) |
| 83 | Supply fixing testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make incl. PVC Block. |
| 84 | SITC of wall fan 400 mm sweep as approved by EIC ,240v,50 Hz complete , etc. as required. Make(Usha /Orient/Crompton/ Havells |
| 85 | Engaging of skilled labour for Dismentling of old damaged materials like wires in scraps, fixtures switches-sockets, panels, complete as directed by the engineer at site and stacking and handing over to concerned department including carrying out some repairing works etc. |
| 86 | Providing of Chemical earthing as per IS standards by way of digging 10' deep pit then embedding 3 meter G.I Earthing electrode , 80mm dia. connecting the plate with main control board by 10 SWG copper wire with 1/2\\" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound. |
| 87 | Supply, laying ( partly underground/partly overhead) , testing and commissioning of PVC alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. |
| 88 | d)35 sq.mm 2 core ( armoured) |
| 89 | Supply installation testing and comm. of flood light 100 W ( warm, white ), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07, , with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC,lower THD, toughned glass and secondary lens,Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/ Havell /Wipro/Crompton make. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. |
| 90 | Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) |
| 91 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. |
| 92 | Normal INCOMING: Adj. TMR Based MCCB 125 Amps DP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH Legrand/ Shinider/Semiens/ABB make. |
| 93 | b) 2 strip Aluminium Bus Bar of 200 Amp. |
| 94 | c)Digital meters and phase indicators -1 set. |
| 95 | d) onload Change over switch 63 Amp for generator.Front operated. |
| 96 | e) 2 strip Aluminium Bus Bar of 200 Amp. |
| 97 | c)Digital meters and phase indicators -1 set. |
| 98 | Inverter Incommer (a) 63 amp DP MCB 10 K Legrand/ Shinider/Semiens/ABB make. |
| 99 | (b) 200 Amp 2 strip bus bar |
| 100 | c)Digital meters and phase indicators -1 set. |
| 101 | OUTGOING: c) 40-63amp DP MCB c curve 10 K Legrand/ Shinider acti-9/ABB make, sample to be approved before installation.. |
| 102 | c) space for 6 way MCB's Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender