Tender For Urgent maintenance Of Staff Barrak At Belonia Sub-Jail. / Sh:- Earth Work, Brick Work, Wood Work, cement concrete And Reinforced Cement Concrete Work, Plastering And Painting, G.C.I. Roofing Work, Water Supply And Sanitary Installation Wor
Tender Value
16.63 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
5 days left
EMD
33265
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Urgent maintenance Of Staff Barrak At Belonia Sub-Jail. / Sh:- Earth Work, Brick Work, Wood Work, cement concrete And Reinforced Cement Concrete Work, Plastering And Painting, G.C.I. Roofing Work, Water Supply And Sanitary Installation Works And Other Allied Works During The Financial Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. Complete and stacking within 50 metres lead.i) Of area 3 sqm and below |
| 2 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-charge. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.1) -All kinds of soil |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.a) All kinds of soil |
| 5 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering •-All work upto plinth level:a) 1:4:8 ( 1 Cement 4 fine sand: 8 graded well burnt brick aggregate 40 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement-i) 1:1½:3 ( 1 Cement: l½ fine sand 3 graded stone aggregate 20 mm nominal size) |
| 8 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.i) Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 9 | Centering shuttering including struttings, propping etc. and removal of form work for:i) Suspended floors, roofs, landings, balconies and access platform with timber planks |
| 10 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete as per direction of Engineer-in-charge.i) 0.63mm thick with zinc coating not less than 275gm/m2 |
| 11 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc. complete as per direction of Engineer-in• charge.i) 0.63mm thick with zinc coating not less than 275gm/m2 |
| 12 | Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete as per direction of Engineer-in-charge. (frame work to be paid separately): i) 12 mm thick White face insulating board |
| 13 | First class brick work in foundation and plinth including cost of all materials as required complete:-i) In cement mortar 1:4 ( 1 cement: 4 fine sand). |
| 14 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-i) In cement mortar 1:4 ( 1 cement: 4 fine sand). |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :i) Karai wood |
| 16 | Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISi marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 x 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Chargei) 35 mm thick shutters |
| 17 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all completei) Fixed to openings / wooden frames with rawl plugs screws etc. |
| 18 | Providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 fine sand : 6 graded stone aggregate 20mm nominal size) |
| 19 | Providing and fixing aluminium tower bolts ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. i) 250xl0 mm |
| 20 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :i) 125 mm |
| 21 | Providing and fixing aluminium sliding door bolts ISi marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:i.300xl6 mm |
| 22 | 12 mm cement plaster of mixi.Cement mortar 1:4 (1 cement: 4 fine sand) |
| 23 | 15 mm cement plaster on the rough side of single or half brick wall of mix :i.Cement mortar 1:4 (1 cement: 4 fine sand) |
| 24 | Neat cement punning |
| 25 | Distempering with 1st quality washable acrylic distemper of approved brand and manufacture and of required shade on old work ( one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge. |
| 26 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge. |
| 27 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : |
| 28 | a) With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 29 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 30 | Painting with synthetic enamel paint (one or more coats) of required colour of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge. |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]:a) Two or more coats on new work |
| 32 | Cement concrete flooring 1:2:4 (1 cement : 2 fine sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. all completeetc as per direction of Engineer-in-charge.a) 40 mm thick with 20 mm nominal size stone aggregate |
| 33 | Providing and fixing white vitreous china water closet squatting pan (Indian type)i) Orissa pattern W.C. pan of size 580x440 mm |
| 34 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :i) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 35 | Providing and fixing kitchen sink including making all connections excluding cost of fittingsi) White glazed fire clay sink of size 600x450x250mm |
| 36 | Providing and fixing 3 layer PP-R (Poly propyleneRandom copolymer) pipes SOR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer in Charge.i) PN-16 Pipe, 25 mm OD |
| 37 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings including trenching,refilling & testing of joints complete as perdirection of Engineer in Charge.i) PN-16 Pipe, 40 mm OD (SDR-7.4) |
| 38 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:-i) With cement mortar 1:4 (1 cement : 4 fine sand). |
| 39 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender