Tender For Remaining Work In School Under Rmsa 2018-19 At Gsss Bhagal Ii, Block - Nimbahera, Dist - Chittorgarh
Tender Value
1.30 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
2600
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chittorgarh → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Remaining Work In School Under Rmsa 2018-19 At Gsss Bhagal Ii, Block - Nimbahera, Dist - Chittorgarh
BOQ
| Sl. No. | Item Description |
| 1 | P.C.C. IN FOUNDATION:- Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:5:10 (1 cement:5 Coarse sand :10 gradeed stone aggregate 40 mm nominal size). |
| 2 | Random rubble dry stone kharanja under floor |
| 3 | Brick masonary in superstructure with bricks of class designation 75 inCement mortar 1:6 ( 1 cement : 6 coarse sand ) |
| 4 | Half Brick Masonry in foundation & plinth using bricks designation 75 in low cost Shree Binder & sand mortar (1:3) ( for non load bearing walls) Cement mortar 1:6 ( 1 cement : 6 coarse sand ) |
| 5 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. ABOVE PLINTH LEVEL |
| 6 | Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement M 20 grade nominal mix ( with graded stone aggregate 20mm nominal size) |
| 7 | Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor three level Thermo mechanically treated bars (conforming to relevant IS:1786.) |
| 8 | Door Window Frames:-Provinding and fixing Steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide .<35x35x5 @ 2.6 Kg per Mtr unit weight and 25x25x4 @ 1.8 Kg per Mtr unit weight |
| 9 | Providing and fixing M.S. sheet single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally bracked with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engineer-in-charge but excluding cost of chowkhats: including two coats of anti-corrosive red oxide primer paint.M.S. Sheet 22 S.W.G.Add extra for double leaf shutters. |
| 10 | Grading roof for water proofing treatment with water proffing compound: Cement concrete 1: 2: 4 (1 cement: 2 Course sand: 4 Greded stone aggregate 20 mm nominal size) |
| 11 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 12 | Providing and laying cement concrete including curing compaction etc. complete in retaining walls, return, walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses string or lacing courses, parapets coping bed blocks anchor blocks plain windows sills, fillets etc. up to floor three level excluding the cost of centering and shuttering. M15 grade Nominal Mix ( with graded stone aggregate 20mm nominal size) |
| 13 | Providing and fixing square bars or other flat welded to window ventilatiors and main gate |
| 14 | Polished blue kota stone flooring skirting, laid over 20mm thick base of CM 1:4 and jointed with gray cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 900 sq.cm. 20 mm thik slab. Deduct for using kota stone other then blue in color. |
| 15 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 16 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish : 20mm thick |
| 17 | White washing with lime to give an even shade including all scaffolding New work (three or more coats) |
| 18 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffoldingNew Work ( Three or more coats) |
| 19 | PANTING ON DOORS & WINDOWS:- Painting with Aluminium paint of approved brand and manufacture to give an even shade: new steel work (2 or more coat on new work). |
| 20 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 21 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110mm dia |
| 22 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:500 litres capacity. |
| 23 | P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: Brass 400 gm. 15mm nominal bore. |
| 24 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 25 | P & F GI pipes ( External works ) with GI fittings eccluding Union (IS:1239 mark) and MS clamps, including trenching and refilling earth etc.25mm dia Nominal Bore |
| 26 | P & F GI pipes ( External works ) with GI fittings eccluding Union (IS:1239 mark) and MS clamps, including trenching and refilling earth etc.15mm dia Nominal Bore |
| 27 | P &F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. 1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make (Nirali, Neel Kanth, Jaina, Faber-castelll) with large waste coupling. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender