Tender For Special Repair Of Various Public Toilet Blocks In Sector 38 And 38(W), Chandigarh (Ch. To: Ward Development Funds (W.D.F)) Approx. Amount : Rs. 39,48,819/- Earnest Money : Rs.78,976/- Time Limit : 03Months.
Tender Value
39.48 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
78976
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Various Public Toilet Blocks In Sector 38 And 38(W), Chandigarh (Ch. To: Ward Development Funds (W.D.F)) Approx. Amount : Rs. 39,48,819/- Earnest Money : Rs.78,976/- Time Limit : 03Months.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead (DSR No.15.26) |
| 2 | Demolishing mud phaska in terracing and disposal of material within 50 metres lead (DSR No. 15.27) |
| 3 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR No.13.91) |
| 4 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below (DSR No.15.12.1) |
| 5 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.(DSR No.14.79) |
| 6 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead(DSR No.15.52) |
| 7 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.(DSR No.14.82) |
| 8 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge 15 mm to 40 mm nominal bore (DSR No.15.44.1) |
| 9 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.(DSR No.15.60) |
| 10 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead (DSR No.15.25) |
| 11 | Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : With residual type petroleum bitumen of grade VG -10 (DSR No.12.15.1) |
| 12 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat With common burnt clay F.P.S.(non modular) brick tile of class designation 10 (DSR No.12.16.1) |
| 13 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase(DSR No.12.21.1) |
| 14 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.(DSR No.12.22) |
| 15 | Providing and laying of water proofing compound (special quality) on roof (NSI) |
| 16 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge With cement mortar 1:4 (1 cement : 4 fine sand) (DSR No.14.1.1) |
| 17 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Tan brown make of Kevay (DSR No.11.56.1) |
| 18 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in allcolours, shades except burgundy, bottle green, black of any size as approvedby Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thickbed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cementslurry @ 3.3kg per sqm including pointing in white cement mixed with pigmentof matching shade complete. Make kajaria, orient bell(DSR No.8.31) |
| 19 | Providing and laying tactile tile (for vision impaired persons as per standards) of size300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.(DSR No.16.90) |
| 20 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete(DSR No.13.80) |
| 21 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer (DSR No.13.41.1) |
| 22 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (DSR No 13.46.1) |
| 23 | 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge. Decorative finish (wood grained finish)(DSR No.9.142.2) |
| 24 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.(DSR No.9.141) |
| 25 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes(DSR No.10.30.1) |
| 26 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm ( DSR No. 9.100.1) |
| 27 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 300x10 mm (DSR No.9.97.1) |
| 28 | 250x10 mm (DSR No.9.97.2) |
| 29 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete Twin rubber stopper(DSR No.9.101.2) |
| 30 | Providing and fixing white vitreous china pedestal type water closet (Europeantype W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and makinggood the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (DSR No.17.2.1) |
| 31 | Providing and fixing of vitreous china ware star white colour under counter wash hand basin of size 56x43 cm Hind Ware make or any equivalent make parry ware etc. as per instrucion of Engineer in Charge including the cost of wicking make up 32 mm waste, chair type adjustable brackets, jaguar 167/B nova make central hole mixer including cost of cutting, granite for WHB and making hole in granite for mixer, plugs, screws complete in all respect. (NSI) |
| 32 | Providing and fixing of crome plated stainless steel Grab rail for disabled person in Toilet Block complete in all respects as height 2'-6\\" with minimum clearance 2\\" from wall/ washvasin to the entire satisfaction of Engineer in charge(NSI) |
| 33 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (DSR No.17.16A) |
| 34 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete(DSR No.17.31) |
| 35 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern.(DSR No.17.4.1) |
| 36 | Providing and fixing CP brass auto closing concealed urinal press matic taps complete in all respect as per the entire satisfaction of Engineer in charge(NSI) |
| 37 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore (DSR No.18.16.1) |
| 38 | Providing and fixing of CP brass bib cock, Pressmatic Taps of approved make complete in all respect as per the entire satiusfaction of Engineer in charge(NSI) |
| 39 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms(DSR No.17.71) |
| 40 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms (DSR No.17.72) |
| 41 | Providing and Fixing Toilet paper holder: C.P. brass (DSR No. 17.34.1) |
| 42 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore (DSR No.18.11.1) |
| 43 | 20 mm dia nominal bore (DSR No.18.11.2) |
| 44 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required 15 mm nominal bore (DSR No.18.47.1) |
| 45 | 20 mm nominal bore (DSR No.18.47.2) |
| 46 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 75 mm outlet Sand Cast Iron S&S as per IS- 1729(DSR No.17.60.2.2) |
| 47 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design- Inside dimensions 455x610 mm and 45 cm deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No. 19.30.1.1) |
| 48 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5(DSR No.19.4.1.1) |
| 49 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore(DSR No.18.17.1A) |
| 50 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore (DSR No.18.18.3) |
| 51 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (DSR No.18.48) |
| 52 | Providing and fixing 100 mm sand cast Iron grating for gully trap.(DSR No.17.29) |
| 53 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia(DSR No.17.28.1.1) |
| 54 | Providing and installation of sanitary napkin vending machines with sanitary napkin pad (1 Box = 200 pads). The cost include basic cost of equipment, taxes, delivery charges, training charges & warranty of 12 months complete in all respect.(NSI) |
| 55 | Providing and installation of sanitary napkin incinerator for the disposal of sanitary napkin pads of approved quality complete in all respect as per the entire satisfaction of Engineer in Charge (NSI) |
| 56 | Providing and fixing of Hand dryer dispenser in Wash Room area as per direction of Engineer In Charge. Make : Genuain/ YKing or equivalent etc.(NSI) |
| 57 | Providing and fixing of exhaust fan of 12\\" of reputed make with metallic blades make of Crompton/Bajaj/ USHA heavy duty complete in all respect as per the satisfaction of Engineer in charge.(NSI) |
| 58 | Providing and fixing of ceiling fan of 48\\" of reputed make of Usha/Crompton/ Khaitan complete in all respect as per the satisfaction of Engineer in charge.(NSI) |
| 59 | Providing and fixing of tubelight 4', 1x40 watt type Usha/ Havells/ Philpis complete in all respect as per the satisfaction of Engineer in charge. (NSI) |
| 60 | Providing and fixing of 50 Watt LED Flood light with bracket outside on the wall complete in all respect as per the entire satisfaction of Engineer in Charge(NSI) |
| 61 | Providing and fixing of acrylic multiligual Braillc (raised dots) Directional Signboards of size 6\\"X9\\" designed as per accssibility standerd and having 3 mm thick acrylic base plate with Upper case San Serif words made of white acryrlic non flare cut out letters of height 15 mm raised not less than 0.8 mm above base plate and the equivalent word written in Hindi with Devanagri non flare acrylic letter of height 15mm raised not less than 0.8 mm above base plate and having a non glare acrylic cut arrow pointing in the glae acrylic cut arrow pointing in the required direction. Each signboards to be fixed as per manufacturers specifications on the wall at the approval locations and at a height of 1200 mm from FFL complete as per design/ specifications and guidlines as per entire satisfication of EIC. (NSI) |
| 62 | Providing and placing Round shape plastic flower POT (Gamla) size 12\\" dia Green in colour including decorative plant for outdoor decoration (NSI) |
| 63 | Providing and placing HDPE waste cantainer for wet and dry waste of capacity 20 Ltr with foot pedestal operated opening lid (NSI) |
| 64 | Providing and fixing of Acrylic sheet with silver remark engraving plate 12\\"x12\\" in position at required place to the entire satisfaction of Engineer in charge(NSI) |
| 65 | Providing and fixing of Acrylic sheet with silver remark engraving plate 48\\"x24\\" in position at required place to the entire satisfaction of Engineer in charge(NSI) |
| 66 | Providing and fixing a disabled person toilet alarm kit (comprosing an over the door/ wall light and sounder, one toilet reset switch, ceiling/ wall pull unit pull cord and disabled WC sticker). The system operats by simply pulling the cord to activate the sound alarm and over -door light outside the toilet (pull cord length more than 275 cm). The alarm system should consist of a red pull cord with red bangles of 50mm diameter, with one bangle at a height between 800mm and 1000 mm and the other at 100mm above floor level. COmplete set in all respect as per the entire satisfaction of Engineer in charge(NSI) |
| 67 | Providing and fixing of Emergency distress button (waterproof) inside barrier free toilet along with a siren sound louder than 120 dBA and blue/ red strobe flashing light. Rated voltage/ current: 12 VDC/ 120 mA, power adapter input voltage : 110-120 VAC, output voltage : 12 VDC/3A (36W) complete set in all respects as per the direction of the Engineer in Charge(NSI) |
| 68 | Designing, providing and fixing of aluminium composite glowing sign board of clear size 5'x1'3\\" after mounlding 3\\" both side made out of size 5'x4'9\\" sheet having thickness of 3mm, CNC router cut letter acrylic sheet 2.8 mm with CNC laser cut, MS SQ pipe 42 mm i/d having 1mm thick, 3mm thich sun board box for housing glowing LEDs module, backside board covered with 2mm ACP sheet, LED module and water proof power supplies, installation of specific height by fixing with 2 No. L-type brackets and 2 No. flat brackets on wall including cost of anchor bolts and electrical wiring with making connection with swith boards at site incluindg loading, unloading, carriage & labour charges complete in all respect.(NSI) |
| 69 | Providing and fixing of Customer Feedback device having 3 No. push buttons, metal body, wall mounted machine use for giving rating on Public Toilet including terminal box, electrical paints, wiring complete in all respects.(NSI) |
| 70 | NOTE:-Credit against old MS doors, ventilators, windows etc (NSI) Dismantle W,D & V |
| 71 | Credit against old Roof tiles Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender