Tender For maintenance Of electrical installation In Nrb At Chandigarh (Amc Of Bosch Make Cctv Surveillance At Various Locations In Punjab Raj Bhawan, Chandigarh (Recoverable From Punjab Govt.) (For The Period Of 2026-27).
Tender Value
14.23 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
6 days left
EMD
28480
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance Of electrical installation In Nrb At Chandigarh (Amc Of Bosch Make Cctv Surveillance At Various Locations In Punjab Raj Bhawan, Chandigarh (Recoverable From Punjab Govt.) (For The Period Of 2026-27).
BOQ
| Sl. No. | Item Description |
| 1 | Providing, comprehensive, services &Mtc. of Bosch make CCTV surveillance system. The services shall be done by experienced Technician having experience of similar type of job. The equipment shall be tested twice in a month including cleaning of the complete system and the complaint shall be attended immediately round the clock as and when required by the deptt., (As per Complete Item No. 1 of the DNIT). |
| 2 | OFC/ CAT6 cable etc. |
| 3 | DSR item No.40.6.25/6MPIPIRBullet CameraSupplying Installation Testing and Commissioning of 5/6MP IP IR Bullet Camera having following specifications and features etc, (As per Complete Item No. 2 of the DNIT). :- |
| 4 | 5MP/6MP IP IR 2.7 to 4 mm ~12 to 13.5mm or better Varifocal Motorized lens outdoor Bullet Camera. |
| 5 | DSR item No.40.9.1Supplying Installation Testing and Commissioning of PTZ (Pan, Tilt and Zoom) IP IR Camera having following specifications and features etc :-PTZ (Pan,Tilt and Zoom) IP IR Camera having following specifications and features etc, (As per Complete Item No. 3 of the DNIT). |
| 6 | S/E of steel pole made out of galvanized mild steel tubes having 114 mm dia at bottom and 60/75 mm dia at top with cast alum. Embellishments. The poles are primer coated and painted with polyurethane paint of 4 Mtr. Height of Twinkle make LUXMAX-SP-140-400/ May fair MFMD-109 or its equivalent make Bajaj/ K-LITE/ HOMDEC/ Valmont only. , (As per Complete Item No. 4 of the DNIT). |
| 7 | DSR item No.39.21 Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices and terminations, Pre-assembled shelves in multiple configurations, Rubber fiber slotted bracket built-in, (As per Complete Item No. 5 of the DNIT). |
| 8 | 6PortLIU |
| 9 | 12 PortLIU |
| 10 | DSR item No. 39.6 Supplying, Installation, Testing and commissioning of small form-Pluggable (SFP) for Network Switches. Must be hot Pluggable, RoHS Complaint, etc. complete as required. |
| 11 | 1G SFP Single Mode/Multi Mode |
| 12 | 10 G SFP + Single Mode/Multi Mode |
| 13 | DSR item No.39.1.1 Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher,(As per Complete Item No. 7 of the DNIT). |
| 14 | 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+. |
| 15 | DSR item No.39.20.1 Supplying and drawing following core Multi mode Fiber Optic Cable having corrugated steel armoring, leser optimize 50/125 µm with HDPE jacket, LSZH (Low smoke Zero Halogen), Tight- buffered or loose tube, maximum attenuation: < 3.5 dB/km at 850 nm, < 1.5 dB/km at 1300 nm, bandwidth > 2000 MHz-km at 850 nm, > 500 MHz-km at 1300 nm compliance and certifications, (As per Complete Item No. 8 of the DNIT). |
| 16 | 6 Core Multi Mode Optical Fiber Cable |
| 17 | DSR item No.39.22 Supply and fixing Patch Cord of Optical Fiber Multi Mode or Single Mode LC to LC Fiber Duplex having high precision ceramic ferrule with good concentricity, Fiber corning single mode G652D, Cable Type 2mm with Mechanical specification Apex Offset < 50 µm, Fiber Height + 100 nm, (As per Complete Item No. 9 of the DNIT). |
| 18 | DSR item no.39.26 Supply and fixing Outdoor Pole/ Wall mount 6U Rack, IP55, Front Door with Filter, Louver & Unique key Lock. 3 Socket PDU 5Amp - 1 No. Self adhesive thermal foam from inside. Hood For Air Inlet at front side.1U Cantilever Tray 250mmDepth, Gasket. Etc. complete as required. |
| 19 | DSR item No.15.16 SupplyingandlayingoffollowingsizeDWCHDPEpipeISI markedalongwithallaccessorieslikesocket,bend,couplers etc.conforming toIS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioningandprotectivecoveringetc.,completeasrequired. |
| 20 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 21 | Supply & laying of PVC copper wire 1.5 mm sq. 3 core round sheathed wire on existing surface with suitable clamps/ hanger etc. including making connection and petty material etc. as required to complete the job to the entire satisfaction of Engineer-in-charge. The copper wire should be of Polycab/ L&T/ Havells/ Finolex/ R.R. Kables/ KEI make only. |
| 22 | DSR item No.39.17.1 Supplying,drawing,Installation,Testing and commissioningof CAT6UTPLSZH23AWGTwistedPair Cableinexisting conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating TemperatureRange:-5°to+60°C.BendingRadius:<4X CableDiameterat–5°C±1°CandPullingForce:11.5Kg. |
| 23 | 1Runofcable |
| 24 | DSR item no.26.1.1Online UPS - Input supply: Single Phase, Output Supply : Single Phase Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) ON LINE Uninterrupted Power Supply (UPS) system suitable for Single Phase input, Single Phase output AC Supply., (As per Complete Item No. 14 of the DNIT). |
| 25 | 2 KVA |
| 26 | Replacement of sealed maintenance free battery 26AH 12V of Exide/ Panasonic/ Amaron make only complete in all respects, including replace not of existing /defective/copper leads and brass terminals to the Entire satisfaction of EIC. |
| 27 | DSR item no.42.4.2 LED Display Supplying, Installation, Testing and Commissioning of following size LED display (LED monitor) industrial grade with 3840x2160 resolution or better, USB playback, bluetooth and miracast connectivity, 4X HDMI 2.0, DP 1.2, HDR 10/10+, brightness: 500-nits or better, Video wall mode should be available, contrast ratio: 1200:1,(As per Complete Item No. 16 of the DNIT). |
| 28 | 42 inch or larger Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender