Tender For Providing Street Lighting Through Under Ground Cable On Cycle Track Dakshin Marg, Udyog Path And Shanti Path Complete (Horizontal) At Chandigarh (Installation Of Street Lighting On Cycle Track/ Pedestrian Path On Purb Margbetween Junction
Tender Value
22.52 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
45060
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Street Lighting Through Under Ground Cable On Cycle Track Dakshin Marg, Udyog Path And Shanti Path Complete (Horizontal) At Chandigarh (Installation Of Street Lighting On Cycle Track/ Pedestrian Path On Purb Margbetween Junction No.43 To 44 Towards Industrial Area Phase-I (Balance Work) (Ibm Scheme No. W1/2018/17244).
BOQ
| Sl. No. | Item Description |
| 1 | DSR item No.1.17 Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 2 | 3 x 1.5 sq. mm |
| 3 | DSR Item No.5.1 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required. |
| 4 | DSR item No.5.12 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 5 | DSR item No.15.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 6 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 7 | DSR item No. 15.15 Supplying and laying of following sizeDWC HDPE pipe ISImarkedalongwithallaccessorieslikesocket,bend,couplers etc.conforming toIS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. |
| 8 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 9 | Fabrication, Supply & Erection of 5 Mtr. Long G.I. Pipe Stepped Pole made out of 2.5” dia G.I. Pipe (3.5 Mtr. bottom) and 2” dia G.I pipe (1.5 Mtr. top) of B-Class ISI marked G.I. Pipe. The length of the overlap at joint should be 6” (minimum) (The cost of which is inclusive). (As per Complete Item No. 6 of the DNIT). |
| 10 | Fabrication, Supply & Erection of G.I. Pipe Bracket (Medium Class) I.S.I. marked of 1¼” dia 0.9 Mtr. long welded with 2.5” dia G.I. pipe 1’ long canopy with top end closed with 14 GMS sheet to avoid entry of rain water in the pole for erection of street light fittings on existing G.I pipe pole with suitable size nuts & bolts. (As per Complete Item No. 7 of the DNIT). |
| 11 | Single Arm G.I. Pipe bracket with 0.9 meter overhang |
| 12 | S/E of Cement Collar and Jn. Box at the base of the pole with the detailed specification as given below: Jn. Box Construction: Supply & fixing of OEM made junction box IP-66/67 made out of polycarbonate with glass fiber reinforced of size 210x155x90 mm (minimum) with 5 Nos. OEM made connectors/ terminal blocks, (As per Complete Item No. 8 of the DNIT). |
| 13 | Labour charges for horizontal boring by mechanical means (hydraulic excavator)/ manual means 1 Meter below the ground level for laying of DWC Pipe including cost of 2 nos. Pit digging and refilling, disposal earth to be leveled and neatly dressed complete in all respects to entire satisfaction of the Engineer in Charge of the work. |
| 14 | Supply and laying of XLPE insulated PVC sheathed, armoured, aluminum conductor cable of 1.1 KV grade conforming to IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid in existing trench/ DWC/ RCC/ HUME/ METAL Pipe as required at site to the entire satisfaction of E.I.C. (As per Complete Item No. 10 of the DNIT). |
| 15 | Size 10 Sq.mm 4 Core |
| 16 | Size 16 Sq.mm 4 Core |
| 17 | Supply & Fixing of OEM Made GRP Timer Feeder Pillar of size 1075x850x320mm (Apprx.) or better, Glass-Fiber Reinforced Polyester SMC with Protection class IP 54 in accordance with IEC 60529 and Used for fabrication of Feeder Pillar boxes shall be made of out of insulating, slow-burning and self-extinguishing composite (polyester + glass fiber) characterized with resistance to atmospheric agents (UV). (As per Complete Item No. 11 of the DNIT). |
| 18 | DSR item no. 8.13.3LEDStreet lightfixture, powdercoatedpressurediecast aluminium body (System lumen efficacy ≥120 <135 lm/Watt)Supplying,installation,Testing&CommissioningofStreet lightLEDfixturepowdercoatedpressurediecast aluminiumbodywith driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 12 of the DNIT). |
| 19 | 15 Watt Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender