Tender For Creation Of Archival Storage Facility At Dharamshala Building, Mpmmcc, Varanasi, Up - 221005
Tender Value
8.90 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
16 days left
EMD
17802
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Creation Of Archival Storage Facility At Dharamshala Building, Mpmmcc, Varanasi, Up - 221005
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead |
| 2 | Dismantling stainless steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 4 | For thickness of tiles 10 mm to 25 mm |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 6 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 7 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 8 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 9 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 10 | In cement mortar |
| 11 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin-charge. |
| 12 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 15 | Suspended floors, roofs, landings, balconies and access platform |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 17 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Rebaring reinforcement bars in existing R.C.C. slab by drilling and anchoring with Hilti HIT-RE 500 V3 injectable chemical anchoring system or equivalent for min depth of 200mm, including drilling of holes of required diameter and depth using rotary hammer/core drilling machine, cleaning of holes using brush and compressed air as per manufacturer’s specifications, supplying and injecting of approved chemical anchor, insertion and fixing of Fe500D grade deformed steel reinforcement bars of required diameter and length, holding bars in position till full curing of chemical, including all labor, materials, consumables, equipment, safety measures, scaffolding, etc., complete as per manufacturer's recommendations and direction of Engineer-in-Charge. |
| 19 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: |
| 20 | Cement Mortar 1:6 (1 cement : 6 coarse sand). |
| 21 | 12 mm cement plaster of mix : |
| 22 | 1:6 (1 cement: 6 fine sand) |
| 23 | 15 mm cement plaster on the rough side of single or half brick wall of mix |
| 24 | 1:6 (1 cement: 6 coarse sand) |
| 25 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 26 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour |
| 27 | Two coats |
| 28 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 29 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 30 | Finishing walls with textured exterior paint of required shade |
| 31 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 32 | Providing and applying integral crystalline slurry of hydrophilic in nature or waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. |
| 33 | For vertical surface two coats @ 0.70 kg per sqm per coat |
| 34 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 35 | Size of Tile 600x600 mm |
| 36 | Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B. masonry and or tying by binding wire etc. complete |
| 37 | Providing and fixing alumimium partition of approved make conforming to IS: 733 and IS: 1285 having section thickness of min. 2mm to the required height, partly glazed and partly panneled or fully glazed or fully panneled using aluminium section satin/matt finish anodizing of required size for bottom, top, middle and vertical rails at required intervals panneling with 12mm thick nova pan or ancholam/WPC both side pre-laminated board fixed with sloping aluminium beeding alround with neoprene gasket glazing with min. 5.5mm forsted/plain glass fixed with alumimium channel beeding two way PVC lining/ rubber gasket to ensure water tightness and no rattaling including providing necessary cover mould using suitable alumimium section so as to take care of gaps between the walls/ ceiling / flooring and partitions etc. including frosted/Black/brown film & providing and fixing necessary fittings as specified and directed. (Make- Jindal, Indal, Hindalco) With powder coated partitions (minimum thickness of powder coating 50 micron) |
| 38 | With powder coated partitions (minimum thickness of powder coating 50 micron)Partly glazed and partly panneled or fully glazed or fully panneled |
| 39 | Providing and fixing alumimium of approved make conforming to IS: 733 and IS: 1285 having section thickness of min. 2mm door frame and shutter side hung/sliding to consist of partly glazed partly panneled/ fully panneled/ fully glazed with 5.5mm thick glass sheet, plain or frosted glass fixed with two way PVC lining/rubber gasket to ensure notes tightness and no rattaling and panneling with 12mm thick nova pan or Ancholam/WPC board finished on both side as required using extruded alumimium section for shutter frame satin finish anodized including frosted film , P/F push-pull plates handles and of approved make and heavy duty fittings including tower bolts, hydraulic door closer/ floor spring, handles etc. including frosted/Black/brown film as per requirement of suitable capacity etc. complete as specified and directed by Engineer In charge. (Make- Jindal, Indal, Hindalco) |
| 40 | With powder coated partitions (minimum thickness of powder coating 50 micron) |
| 41 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 42 | Size of Tile 600x600 mm |
| 43 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 44 | Granite stone slab of all colour and texture except black, Cherry/Ruby redArea of slab upto 0.50 sqm |
| 45 | Supplying and installation of moisture resistant/fire resistant cement board as per standard sizes fixed with self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60 mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. |
| 46 | Cement Bonded particle board 8 mm thick (Termite, Fire & Moisture Resistance), as per IS:14276 : 1995 |
| 47 | 6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender