Tender For Construction Of Office Building For Range Office Raithan Range
Tender Value
80.66 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
1 days left
EMD
1.61 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Office Building For Range Office Raithan Range
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soils |
| 2 | P/L dry Stone Soling duly hand packed & consolidated with hand rammers incl.all carriage leads and lifts complete Job. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size) PCC below Foundation& rooms-Mudmat including carriage. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete, including curing but excluding the cost of centering, shuttering, finishing and reinforcement.- All work upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level, upto floor five level including curing but excluding cost of centering, shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level, including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position cement concrete of specified grade M-15 excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 8 | Centring and shuttering including strutting, propping etc and removal of form work: |
| 9 | Footings foundations, bases of column |
| 10 | Walls (any thickness) including attached pilasters, buttresses, plinth and stringcourses, etc. |
| 11 | Suspended floors, roofs, landings, balconies and access platform. |
| 12 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 13 | Stairs (excluding landings) except spiral staircases. |
| 14 | Edges of slabs and breaks in floors and walls |
| 15 | Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. TMT reinforcement of grade Fe-500D steel bars at all levels. |
| 16 | Supplying filling of watering compacting and dressing nallah muck under floors including all carriage lead lifts complete. |
| 17 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 18 | Brick work with FPS bricks of class designation 75 in upto floor V-level in cement mortar 1:6 (1 cement : 6 coarse sand) etc complete job. |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): imported KD Wood incl. all carriages leads and lift complete job |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, kiln dried imported/seasoned timber.35mm incl. all carriages leads and lift complete job |
| 21 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 3.5 mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws 35 mm KD Wood incl. all carriages leads and lift complete job |
| 22 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge of 35 mm kD Wood incl. all carriages leads and lift complete job |
| 23 | Providing and fixing with 3.5mm float glass including beading incl. all carriages leads and lift complete job |
| 24 | 12 mm cement plaster on rough side of brick wall in1:4(1 cement : 4 fine sand mortar) |
| 25 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 26 | 12 mm EXTERNAL cement plaster on rough side of single or half brick wall in1:4(1 cement : 4 fine sand mortar) of required design as per specifications provided by the consultant including necessary scaffolding arrangements |
| 27 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick incl. all carriages leads and lift complete job |
| 28 | Distempering with oil bound distemper of app brand and manufacture incl. all carriages leads and lift complete job |
| 29 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)etc incl. all carriages leads and lift complete job |
| 30 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works complete job (two coats) incl. all carriages leads and lift complete job |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on wood / steel works. |
| 32 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm) |
| 33 | Cement concrete Flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) with 20mm nominal size stone aggregate etc.complete job |
| 34 | Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade incl. all carriages leads and lift complete job |
| 35 | VITRIFIED FLOOR TILESProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm incl. all carriages leads and lift complete job |
| 36 | Providing and laying Marble stone flooring laid in required pattern in linear portion of the building all complete with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge incl. all carriages leads and lift of marbles complete job |
| 37 | Providing edge Double moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Marble Work |
| 38 | Providing laying and fixing of Hamam including 8\\" fireproof conduit work consisting of two pipes upto top floor, including steel cap to restrict bird entry, including making appropriate structure below hamam consisting of brick masonry piers etc complete job in devri stone and appropriate slab stone,including hamam door of appropriate size and specs,including carriage complete job |
| 39 | Structural steel work welded in built up section for trusses and framed work including cutting hoisting, fixing in position anchor bolts and applying a primer coat of approved steel primer.including carriage |
| 40 | Providing / Fixing pre coated high rib coloured galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer incharge)0.50mm (+0.05%) total coated thickness with zinc coating 120 garms per sqm as per IS:277, in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet etc. incl ridges and valleys |
| 41 | Providing and fixing plained eaves boarding of Decorative Galvanised iron Sheets 250x32 mm (nominal size ) incl. all carriages leads and lift complete job |
| 42 | Providing and fixing M.S. railing of required pattern with M.S. square or round tubes,flats, built up or single sections as per the specifications provided by the consultantetc including priming coat with approved steel primer all complete including all carriage leads and lifts. |
| 43 | Making plinth protection 50mm thick of cement concrete 1:2:4 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation, leveling and dressing and finishing the top smooth and curing complete |
| 44 | Providing dash fasteners/ iron hold fast 40x5mm flat 40cm long including fixing to frame with 10mm diameter bolts,nuts and wooden plugs and embedding in cement concrete blocl 30x10x15cm in 1:3:6 mix. incl. all carriages leads and lift complete job |
| 45 | Providing and fixing of Hardware fittings (Alloy) as per approved samples incl. all carriages leads and lift complete job |
| 46 | 100mm Handle |
| 47 | 150 mm Handle |
| 48 | 100mm Tower bolt |
| 49 | 150mm Tower bolts |
| 50 | Stay hooks |
| 51 | L drop 10\\" |
| 52 | P/L of dry rubble masonry with hard stone in foundation and plinth incl. all carriages involved |
| 53 | Providing and fixing 3 layer PP-R (Poly propylene Random co polymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. |
| 54 | 25 mm OD Pn20 |
| 55 | 40 mm OD Pn20 |
| 56 | 50 mm OD Pn20 |
| 57 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes Pn20, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. External work including trenching, refilling etc |
| 58 | pipe 25mm |
| 59 | PPR Union 25mm |
| 60 | PPR Union 40mm |
| 61 | PPR Union 50mm |
| 62 | PPR Adapter 25mm |
| 63 | PPR Adapter 40mm |
| 64 | PPR Adapter 50mm |
| 65 | a) 25mm dia OD |
| 66 | BALL VALVE TANK 25MM |
| 67 | b) 40 mm dia OD |
| 68 | BALL VALVE TANK 40MM |
| 69 | b) 50 mm dia OD |
| 70 | BALL VALVE TANK 50MM |
| 71 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 72 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 73 | Providing and fixing 15 mm nominal bore C.P. brass angle valve approved quality conforming to IS : 8931 |
| 74 | P/F CP long brass wall mixer of approved quality and make as approved by engineeh-in-charge 15mm dia |
| 75 | P/F CP brass Double lever wall mixer with concealed shower of approved quality and make as approved by engineeh-in-charge 15mm dia |
| 76 | Providing and fixing CP Brass shower rose including arm and Flange with 15 or 20 mm inlet 100mm Shower |
| 77 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level whiteP.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 78 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: Range of two urinal basins with 5 literwhite P.V.C automatic flushing cistern. |
| 79 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 80 | P/F white vitreous china pedestal for wash basin complete rested at back for the reception of pipe and fittings |
| 81 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510mm bowl depth 200mm |
| 82 | P/F Cp waste 32mm including waste pipe and all fixtures. |
| 83 | P/F 8mm dia C.P/S.S jet with flexible tube up to 1mter long with S.S triangular plate to European type W.C of approved quality and make. |
| 84 | P/F of bevelled edge mirror of superior glass of approved quality complete fixed to PVC rawl plug with C P Brass screws complete job |
| 85 | P/F of 600 x 120x5 mm glass shelf with edges round of supported on anodised aluminium angle frame with C P Brass bracket and guard rail fixed with 40 mm long screws complete job |
| 86 | P/F in position PVC floor traps |
| 87 | 100mm |
| 88 | P/F soil, waste and vent pipes of medium Class including bends,Tees,etc of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes appropriate class |
| 89 | a)PVC S&S pipe (150mm dia) |
| 90 | a)PVC S&S pipe (100mm dia) |
| 91 | c)PVC S&S pipe (75mm dia) |
| 92 | d)PVC S&S pipe (50mm dia) |
| 93 | PVC Cowell 50/75 mm dia |
| 94 | P/F PVC stay and clamps for PVC pipes |
| 95 | a) 100mm |
| 96 | b) 75mm |
| 97 | Providing and fixing CP soap case of approved quality |
| 98 | Providing and fixing C.P / Stainless steel anti cockroach trap (grating) on floor traps and floor drains with cement mortar, complete in all respects. |
| 99 | Providing & fixing of 15mm dia PVC connection 600mm long including end union and washers complete. |
| 100 | Constructing brick masonry chamber for underground PIPES inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :.Inside dimensions as per requirement mm for single pipe line with one or two inlets |
| 101 | P/F master trap |
| 102 | 2 HP Motor of standard make including fixing in place complete |
| 103 | P/F of Hot water geyser of standard make 50 L |
| 104 | Carriage of Bricks For an average lead of 7kms |
| 105 | Carriage of Sand For an average lead of 40kms |
| 106 | Carriage of 40mm Aggregate for an average lead of 7km |
| 107 | Carriage of 20mm Aggregate for an average lead of 7km |
| 108 | Carriage of Stones for an average lead of 10km |
| 109 | Electrification |
| 110 | Point wiring for switch controlled primary light /Fan /exhaust fan points with 3 x1.5sq mm (P+N+E) FRLS PVC insulated 660/1100 volt grade flexible strandedcopper conductor wires of Polycab / Finolex /RR Kabels /Apar / Grandlays / Salzarmake, to be laid in existing recessed or surface conduitng system and incl thecost of supplying and fixing modular grid plate mounted flush mounted 240 volts 6amp control switch with modular cover plate of ABB /L&T / Simens /Legrend make,complete as per specification and as required to be provided nd fitted on GIboxes .The Job includes providing and laying of circuit wiring with 3 x 1.5 Sq.mmPVC Insulated multistranded copper to be laid through pvc conduit from DB tofirst switch in sub circuit complete job excluding cost of conduits. (Separate wiringfor normal and invertor supply is to be provided and no extra circuit wiring shall bepaid what so ever reason or length) Complete as required(including cost ofconduits with cutting of walls /floors and refacing of same to original position byway of carrying out POP ,Plaster and painting).The job futher includes providingand fixing of Lighting Conceal deeps /Fan deeps Junction boxes of heavy guagesheet steel dully powder coated paint of standard make ISI Marked |
| 111 | oint wiring for 10 Amp Socket out lets with 3x2.5 sq mm (P+N+E) FRLs PVCinsulated 660/1100 volt grade flexible stranded copper conductor wires of ofPolycab / Finolex /RR Kabels /Apar / Grandlays / Salzar make, to be laid inexisting recessed or surface conducting system incl the cost of supplying andfixing modular grid plate mounted flush mounted 2 no 240 volts 6 amp 5 pin socketout let along with 2 No's of 6 Amp control Switch of with modular cover plate ofAnti bakteria series of ABB/L&T/Simens /Legrend make, complete as perspecification and as required to be provided and fitted on GI boxes. The Jobincludes providing and laying of circuit wiring of same size and number of wiresfrom panel board to first switch (Seperate circuit for each points shall beconnected /provided from panel board and no extra circuit wiring shall be paidwhat so ever reason or length) Complete as required (including cost of conduitswith cutting of walls /floors and refacing of same to original position by way ofcarrying out POP, Plaster and painting) |
| 112 | oint wiring for 16 Amp Socket out lets (Two out lets wired in one sub circuit)with 3x4 sq mm (P+N+E) FRLS PVC insulated 660/1100 volt grade flexiblestranded copper conductor wires of Polycab make, to be laid in existing recessedor surface conducting system and incl the cost of supplying and fixing modular gridplate mounted flush mounted 240 volts 16 amp 6 pin combined shuttered socketout let along with 240 volt 16 Am control Switch with modular cover plate of Antibakteria series of ABB /L&T / Simens /Legrend make, complete as perspecification and as required to be provided & fitted on Gl boxess with interconnection complete as per specifications and as required. The Job includesproviding and laying of circuit wiring of same size and number of wires from panelboard to first switch (Seperate circuit for each points shall be connected/provided from panel board and no extra circuit wiring shall be paid what so everreason or length) Complete as required (including cost of conduits with cutting ofwalls /floors and refacing of same to original position by way of carrying out POPPlaster and painting) |
| 113 | Supplying and fixing two module stepped type electronic fan regulator on theexisting modular plate switch box including connections with modular plate etc. asrequired.(Anti backteria series of ABB /L&T/ Simens /Legrend make) |
| 114 | Supply and fixing of 16 Amps Box t,e S-S Combine for invertor input and out put |
| 115 | Supply and fixing of 16 Amps 3-Pin Top of Top line series of SSK /Anchor Eq.make |
| 116 | Supplying and fixing of 25mm dia medium class unbreakable PVC conduit alongwith accessories in surface/recess including cutting the walland making good thesame in case of recessed conduit as required. Of approved make |
| 117 | Supply,Installation, Testing and Commissioning of 1P 66, 50-60 Watt LED Flood /Streetlight Luminaries having Aluminium body of of standard make dully isi marked,to be fittedon walls/ poles with necessary cliffs /Clamps with nuts and bolts complete job.The systernefficacy of the luminaire shall be 2100 Im/w. The LEDs used in the luminaire shall be fromeither Lumileds, Osram, Nichia, APT Electronics and CREE make, shall have CCT of5700°K, CR270, SDCMs5, Life of 50000Hrs @ L70B50. The luminaire shall have IP ratingof IP66 & IK rating of IK07. The luminaire shall have lens made of polycarbonate & opticalcover made of toughened glass. The LED driver shall have operating voltage range of 140Vto 270V, PF20.95 @ full load, THDS 10% @ full load, In-built surge protection of 4KV, HVCut off @ 325V (+15V). The luminaire shall have 10KV SPD in-built inside the luminaire.The successful bidder must submit the NABL accreditation certificate for Luminairemanufacturer before supply of material for approval. The LED Luminaire & it's driver bothshould be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LEDmanufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, BIScertificate for LED Luminaire & Driver. of Philips /wipro /Helonix/Lighting techanology make (to be approved before installation) |
| 118 | Supply, Installation, Testing and Commissioning of 1200 mm sweep,ceiling fansuitable for230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required. of CromptonHelonix /Orient /Usha make.The job further includes providing and fixing of GI Fan hookFastner as per site requirement |
| 119 | Supply, Installation testing and cummissioning of 200-250 mm sweep ExhaustFans of of Crompton/Usha /Helonix /Orient make incl making of necessaryconnections and making of necessary space in walls / Windows as per site.TheJob includes providing and fixing of Hylum sheet of required Size for exhaust fan.of anchor make |
| 120 | Supply and fixing of 18 Watts LED surface mounted (Commercial type) downlighter havingfollowing aluminium body of Helonix /Regent /LT/Endo /wipro / philips, make .The luminaire should have a colour temperature of 6500°K, CRI280 and SDCM≤5.. The luminaire shall have impact resistance of IK02 & ingress protection of IP20. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322, \\"FAT\\" before dispatch as per IS 10322 & IK Test. The luminary shall have average life of 50000 hrs operating temperature -10 C to + 45 C The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvp's: LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab & BIS certificate for LED Luminaire & Driver |
| 121 | Supply,Installation.Testing and Commissioning of Wall mounted Controlling Panel Double Door typefabricated out of heavy guage sheet steel,dully Painted with powder coated paint,dust protectedincluding of 02 sets of Al. Bus bar,earth terminal fitted on epoxy cleats,& inner wiring of panel on bothheating and lighting circuits.The switchs are connected with bus bars inside panel.The switch geardevices should be adjustable type made of Schinder makeIncomer and out going Normal125 Amp DP MCB Having10kA Breaking Capacity of Legrend /L&T /ABB /Scheinder make =1 No.200 Amps P&N Bus bar =1 SetBus Bar shall be insulated with heat shrinkable sleeves and shall be colour coded. having minimumsize 20 mm x 10 mm with spacing as per latest E StandardsOne No. (1 No.) digital multifunctional meter for measurement of voltage,current and power etc withSelector switch, one set of CT's of ratio 100 A/5A,CL 1.0,15VA.(1D) 1 Set of phase indication lampsOutgoing Normal63 Amps DP MCB = 2 NoGenerator Incomer/outgoing(outgoing)63 Amp F.Pole Change over Switch = 1 No. (incomer)200 Amps P&N Bus bar =1 SetBus Bar shallbe insulated with heat shrinkable sleeves and shall be colour coded, having minimumsize 20 mm x 10 mm with spacing as per latest IE StandardsOne No. (1 No.) digital multifunctional meter for measurement of voltage current and power etc withSelector switch push battons and one set of CT's of ratio 250 A/5A CL 1.0,15VA.(1D) 1 Set of phase indication lamps Outgoing Generator40 Amps DP (10KA) of Legrend /L&T /ABB /Scheinder make =2 Nos (outgoing) Invertor Incomer /outgoing63 DP MCB (10KA) C Curve = 1 No (incomer) Phase Indicators, = 1 Set.The32 Amps DP = 2 Nos (10KA) of Legrend /L&T /ABB /Scheinder make (outgoing)certificate Panel of manufacturing main switch unil should be CPRI Registered and the Contractor has to submit the testspacing of switchgear asgear'sper and Draving's of panel (Showing claerly dimensions of panel with lE Standards)&to approved by Department not less than the rank of SDO before manufacturing of panel |
| 122 | Supplying and fixing following way, horizontal type three pole and neutral, sheetsteel, MCB distribution board, 415 V, on surface/ recess, complete with tinnedcopper bus bar, neutral bus bar, earth bar, din bar, interconnections, powderpainted including earthing etc. as required. (But without MCB/RCCB/Isolator) ofLegrend/L&T/ABB/Schneider / Simens |
| 123 | 6 way (4+ 18), Double door |
| 124 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioninq etc. as required of Legrend /L&T /ABB / Schneider (Acti 9 series) / Simens make |
| 125 | Supplying and fixing of 63 Amps rating DP 240/415 volts (10KA), \\"C\\" curve of Legrend /L&T /ABB /Schneider (Acti 9 series) / Simens make dully isi marked complete with making of necessary connections. |
| 126 | Supplying and fixing of 32-40 Amps rating DP 240/415 volts (10KA), \\"C\\" curve of Legrend /L&T /ABB /Schneider (Acti 9 series) / Simens make dully isi marked complete with making of necessary connections. |
| 127 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipе of 2.7 metre long etc. with charcoall coke and salt as required.The job includes providingand fixing of 1ft x 1 ft main hole PVC Chamber with its cover complete job |
| 128 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 129 | Supply,Laying, Testing & Commissioning of 35 sq.mm 2- core armored Al CableXLPE/PVC Insulated and Steel sheathed of Havells /Apar /Polycab /Grandlays/KEI make, including cost thimbles on input aswell as output sides dully crimpedwith hydraulic crimping tool incl making of necessary connections. (to be laid asper instructions of site incharge) (The length of cable is tentative and may increaseor decrease and actual measurements are to be taken as per site requirementinconsultation with EIC before procurement and no addition cable beyond actualsite requiement shall be allowed). |
| 130 | Supply,Laying of HDPE Pipe of Size 50/38mm (OD /ID) of standard make dullyISI Marked to be laid under ground 50 CM in depth including execuation andrefilling complete job. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender