Tender For Development Of Tourist Facilitation Centre At Lal Marg By Way Of Providing Gate, Completion Of Fencing, Electricity, Water Supply Etc Under Capex Budget 2026-27.
Tender Value
23.86 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
2 days left
EMD
47720
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Tourist Facilitation Centre At Lal Marg By Way Of Providing Gate, Completion Of Fencing, Electricity, Water Supply Etc Under Capex Budget 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | P/L, of dry stone soling duly hand packed for foundation and backfilling with ramming, dressing, and compacting all inclusive leads, lifts, loading, un-loading, cost and carriage of material involved complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all complete. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) all complete. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. complete. |
| 6 | 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) complete. |
| 7 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 8 | Providing and fixing glazing in doors, windows, ventilator shutters and partations etc with necessary beading complete as per drawings and directions of EIC incl. floating glass panes of 4.00 mm thick (weight not less than 10.00 kg/sqm) all complete. |
| 9 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) all complete. |
| 10 | Touch wood paint two or more coats on new works incl. a coat of wood filler. |
| 11 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm. |
| 12 | Cleaning of inside premises of the buildings with chemicals and use of manual labours complete. |
| 13 | Engagement of Skilled and un-skilled labours for repair of doors and windows incl. necessary fittings all complete. |
| 14 | Engagement of JCB for clearing debris and levelling all complete. |
| 15 | Synthetic enamel paint of approved brand and make incl. priming coat all complete on wood work/steel work. |
| 16 | Providing and fixing of PVC fittings for PVC pipes of approved quality and make( prince B type) incl. all necessary fittings/fixtures all complete. 100mm dia PVC Pipes |
| 17 | 75mm dia PVC Pipes |
| 18 | P/F of C.P fittings of approved brand and make (Cera, Jaguar,Hindware ) or equavallent brand including all necessary fittings/Fixtures incl. carriages, handling etc all complete. Towel Rod 60cm |
| 19 | Water closet Lid (Heavy Duty) |
| 20 | Soap Case |
| 21 | Cp Connection |
| 22 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 23 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete:10 liter capacity -White all complete. |
| 24 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. |
| 25 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, |
| 26 | Providing and fixing of Almunium Hardware fittings of standard quality :- Tower Bolt 4\\" (Heavy Duty) |
| 27 | Handle 4\\" |
| 28 | L Drop |
| 29 | Air Hooks |
| 30 | Carriage of Material:- Sand/Stone agg. For an avg. lead of 20 Kms |
| 31 | Engagemant of Carpenter for tepairing of Truss all complete. |
| 32 | Providing/Fixing of 0.50mm thick Colour coated (Hi-Rib) profile sheets for roofing including vertical/curved surface fixed with Polymer coated J or l hooks, bolts and nuts 8mm diameter with bitumen and G.I Limpet washers or with G.I Limpet washers (0.50mm thick with zinc coating not less than 275g/sqm) including ridges,hips,valleys and carraiges of materials involved upto site of work complete. |
| 33 | Providing and fixing in position Flag stone Pavement Tiles of approved make, shade and colour 40mm thickness over a bed of cement sand motar 1:4mix (1 cement 4 sand) including grouting the joints with matching pigment inclusive concreting of edges & incl. all leads, lifts, carriage etc as per the directions of Engineer Incharge complete. |
| 34 | Providing and fixing of retro- reflectorised Informatory/Guide signs sign board as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing incl. painting all complete. |
| 35 | Electrification |
| 36 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge ) single core cable in surface / recessed medium class PVC conduit, ( excluding the cost of conduit), complete, with modular switch Antibacterial series ( Legrand /ABB / Siemens make.), modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 37 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor ( Havell/Polycab/ paraflex/ Anchor/equivalent as directed by engineer incharge.)single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. |
| 38 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge ) single core cable in surface/ recessed PVC conduit ( excluding the cost of conduit), as required. |
| 39 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,modular plate, suitable GI box , connections etc. as required. Modular Switch & Socket:- Antibacterial series ( Legrand /ABB / Siemens make.) |
| 40 | Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge )) single core cable in surface/recessed medium class PVC conduit.(( excluding the cost of conduit), complete |
| 41 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, Antibacterial series ( Legrand /ABB / Siemens make.)connections etc. as required. |
| 42 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- Antibacterial series ( Legrand /ABB / Siemens make.) |
| 43 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required.Antibacterial series ( Legrand /ABB / Siemens make.) |
| 44 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge ), single core cable in surface/ recessed medium class PVC conduit as required.( excluding the cost of conduit), complete |
| 45 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 46 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 47 | 2 X6 sq. mm + 1 X 6 sq. mm earth wire |
| 48 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 49 | 2 X 16 sq. mm + 1 X 6 sq. mm earth wire |
| 50 | Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required |
| 51 | Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete |
| 52 | 25 mm |
| 53 | 32 mm |
| 54 | Supplying and fixing following modular switch/ socket Antibacterial series ( Legrand /ABB / Siemens make.) with modular plate and cover including switch box and connections etc. as required. |
| 55 | 5/10 amps switch |
| 56 | 15/16 amp switch |
| 57 | 3 pin 5/10 amp socket outlet |
| 58 | 6 pin 15/20 amp socket outlet |
| 59 | Bell push/ indicator |
| 60 | Supply and fixing of 25mm wide Medium Class PVC Casing & Capping (FRLS type) with necessary accessories such as saddles, couplers, tees, bends, and junction boxes, complete as per specifications. |
| 61 | Supply and fixing of wooden channel/ casing made from Kashmiri Budloo wood having2.6\\"- 3\\" width suitable for carrying out wiring for different circuits. |
| 62 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).(legrand / Schinider/ L&T ./ABB/equivalent standard make as directed by engineer incharge.) |
| 63 | 6 way (4 + 18), Double door |
| 64 | Supply installation testing and commissioning of 15 W + LED Surface/recess, Mounted light luminary fitting,square or round shape with minimum system lumen efficacy ≥ 120 lm/Watt with Pressure Die cast Aluminium Housing and Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Helonix/Wipro / Regent make / sample to be approved before installation.. |
| 65 | S/F testing and comm. Of surface mounted LED Batten 20 watt-22 watt +- 1watt commercial series (cool/warm) 4 ft. with minimum system lumen efficacy of ≥ 120 lm/Watt with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. Philips/ Helonix /Wipro make. sample to be approved before installation. |
| 66 | Supplying, installation, testing and commissioning of Decorative Wall Light fitting of Philips / Wipro / Jaquar or equivalent approved make, suitable for aesthetic indoor illumination in galleries, lobbies, corridors, or display areas, complete with LED light source and all required accessories for proper installation and operation.Technical Specifications:Type: Decorative Wall Mounted Luminaire (indoor type)Light Source: Integrated LED or LED lamp with holder (as per design)Wattage: 10W to 25W (as required)Input Voltage: 220–240V AC, 50 HzColour Temperature (CCT): 3000K / 4000K (Warm / Neutral White as specified)CRI (Colour Rendering Index): ≥80Housing: Die-cast aluminium / glass / polycarbonate with high-quality decorative finishFinish / Colour: Chrome / Matt / White / Designer finish (as approved)Mounting: Wall-mounted type with concealed wiring connection boxProtection Class: IP20 or higher, suitable for indoor useAccessories: Mounting brackets, fasteners, connector block, and other hardware complete in all respects.Make: Philips / Wipro / Jaquar / equivalent approved by Engineer-in-Charge. |
| 67 | S/F testing and comm. Of MCB's 10 kA of the below mentioned capacities in sub main controls legrand C curve/ Schinider Acti 9/ L&T ./ABB make as directed by engineer incharge. |
| 68 | a) 6-32 Amp SP MCB |
| 69 | b) 40-63amp DP MCB |
| 70 | Supply installation testing and comm. Of 200-250mm sweep exhaust fan Shutter type of havell /Bajaj/Crompton make as directed by engineer incharge, including making of space in wall/ window as per site requirement and necessary connections. |
| 71 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete . USHA /Havells /Crompton/orient make as directed by engineer incharge. |
| 72 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.Antibacterial series ( Legrand /ABB / Siemens make.) |
| 73 | Supply fixing testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make incl. PVC Block. |
| 74 | SITC of wall fan 400 mm sweep as approved by EIC ,240v,50 Hz complete , etc. as required. Make(Usha /Orient/Crompton/ Havells |
| 75 | Engaging of skilled labour for Dismentling of old damaged materials like wires in scraps, fixtures switches-sockets, panels, complete as directed by the engineer at site and stacking and handing over to concerned department including carrying out some repairing works etc. |
| 76 | Providing of Chemical earthing as per IS standards by way of digging 10' deep pit then embedding 3 meter G.I Earthing electrode , 80mm dia. connecting the plate with main control board by 10 SWG copper wire with 1/2\\" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound. |
| 77 | Supply, laying ( partly underground/partly overhead) , testing and commissioning of PVC alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. |
| 78 | d)35 sq.mm 2 core ( armoured) |
| 79 | Supply installation testing and comm. of flood light 100 W ( warm, white ), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07, , with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC,lower THD, toughned glass and secondary lens,Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/ Havell /Wipro/Crompton make. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. |
| 80 | Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) |
| 81 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. |
| 82 | Normal INCOMING: Adj. TMR Based MCCB 125 Amps DP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH Legrand/ Shinider/Semiens/ABB make. |
| 83 | b) 2 strip Aluminium Bus Bar of 200 Amp. |
| 84 | c)Digital meters and phase indicators -1 set. |
| 85 | d) onload Change over switch 63 Amp for generator.Front operated. |
| 86 | e) 2 strip Aluminium Bus Bar of 200 Amp. |
| 87 | c)Digital meters and phase indicators -1 set. |
| 88 | Inverter Incommer (a) 63 amp DP MCB 10 K Legrand/ Shinider/Semiens/ABB make. |
| 89 | (b) 200 Amp 2 strip bus bar |
| 90 | c)Digital meters and phase indicators -1 set. |
| 91 | OUTGOING: c) 40-63amp DP MCB c curve 10 K Legrand/ Shinider acti-9/ABB make, sample to be approved before installation.. |
| 92 | c) space for 6 way MCB's Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender