Tender For Restoration Of Rain Damages Of Lwss Mewa Bamson Gp. Tikkar Buhla In Tehsil. Bhoranj, Distt. Hamirpur Hp (Sh: Construction of Storage Tank Of 1,25,000Ltrs. Capacity At Dungi Village Under Jal Sakti Section Kanjain)(Under Pdna).
Tender Value
9.42 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
3 days left
EMD
18853
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages Of Lwss Mewa Bamson Gp. Tikkar Buhla In Tehsil. Bhoranj, Distt. Hamirpur Hp (Sh: Construction of Storage Tank Of 1,25,000Ltrs. Capacity At Dungi Village Under Jal Sakti Section Kanjain)(Under Pdna).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited and stacking the excavated earth up to all lifts, stacking the excavated soil up to all lead clear from the edge of excavation and then returniing the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and waterng and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts. |
| 2 | Providing and laying cement concrete 1:3:6 ( 1 cement:3 sand :6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth. |
| 3 | Providing and laying cement concrete 1:1.5: 3 (1 cement: 1.5 sand: 6graded crushed stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :- |
| 4 | Foundation, footing, basis of columns and the like mass concrete.as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 5 | Walls any thickness including attached pillaster buttresses, plinth and string courses from top of foundationup to all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 6 | Providing form work of steel shuttering with steel plat as 3.15mm thich welded with angle iron in frame 30x30x5mm so as to fair finish including centring, shuttering floor two seiling not exceeding 4 mtrs. And removal of the same for insiturein forced conerete and plain concrete work in:- |
| 7 | Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 8 | Providing form work of ordinary timber plankings so as to give a rough finish including centring, shuttering, strutting and propping etc. height of propping and centring below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu reinforced concrete and plain concrete work in : Arches Upto 6 mtr. Span. |
| 9 | Providing and laying cement concrete 1:1.5:3 ( 1 cement:1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and rain renforcement fpr rainforced cement concrete work in: |
| 10 | Suspended floor roofs, landing & shelves & their support balconies, beams, girders, bressumers & canilever upto floor level in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 11 | Arches upto floor two level. |
| 12 | Providing tor steel reinforcement for RCC work I/c bending ,binding and placing in position complete upto floor two level as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. (Labour rate) |
| 13 | Steel work welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of red lead paint. In grating, framed, guards, bars, ladders, railing, bracket & similar works coplete in all respect as per direction and to the direction of Engineer-in-Charge. |
| 14 | For Ladder |
| 15 | For Man Hole Cover |
| 16 | Laying & Jointing GMS/MS Pipes conforming to relevants BIS codes of below mentioned diameters fully jointed with MS Flanges of Table - 17 as per IS :6392 - 1971 excluding the cost of excavation in trenches complete in all respect within all leads & lifts. |
| 17 | 100mm dia |
| 18 | 80mm dia |
| 19 | Providing & fixing CI sluice valve (with hand wheel) as per IS:780 - 1984 Class-I upto 300 mm dia i/c brass spindle & as per 2906 - 1984 Class II for diameters more than 300 mm complete with bolts,nuts,rubber insertion etc,(The tail pieces if required shall be measured & paid for separately) |
| 20 | 100mm dia |
| 21 | 80mm dia |
| 22 | Providing & fixing locking arrangement with SS Handle, lock with keys, nut bolt in all leads and lift as per direction to the entire satisfaction of Engineer-in-Charge. |
| 23 | Painting two coat E/C primer coat on wall ready mixed with white paintmixed paint coplete in all respect as per direction and to the direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender