Tender For Provn Of Fencing For Af Land At Op Site At 27 Wg.
Tender Value
29.04 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
58080
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Fencing For Af Land At Op Site At 27 Wg.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) in soft disintegrated rock each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, |
| 2 | M&L for Cement concrete as using 40mm graded stone aggregate in foundations, filling and mass concrete(Type C2 1:3:6) |
| 3 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts ,posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 4 | M&L Mild steel screw bolts 11 to 15 mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete |
| 5 | M & L for 10 mm dia and over round bars cut to length bent to shape reqd incl cranking bending,spirally for hooping for columns, hooking ends and binding with mild steel wire (anealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe 290 Gde E-165. |
| 6 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire |
| 7 | Supply only Chain link MS galvanised fencing of 3.15mm dia of wire and 40mm X40mm mesh size (pitch of wires) conforming to IS 2721: 2003 including line wires of 4mm dia straining bolts, etc including provision of binding wire complete all as specified. |
| 8 | S & F for MS Framed work by fabrication such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spike, framed guard bars, barred iron doors, ladders, framed balusters, waik ways railing framed of watertanks etc including portions framed and hung as gates including pintle hinges, stops, hand-made sliding bolts etc conforming to Fe-290, Gde- E-165, complete all as specified and directed. |
| 9 | M & L for preparation of new surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of primer as specified. |
| 10 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains, for shafts, wells, cesspits, manholes, pier holes, etc (not exceeding 1.5m in width or 10 sqm on plan), ordinary rock including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m complete for getting out in all kind of soil as specified and directed. |
| 11 | M&L for providing cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 12 | M&L for RCC M-25 (Nominal mix) (20mm graded stone aggregates) for foundation footings foundation beams plinth beams bases for column etc underreamed piles and mass concrete all as specified and directed. |
| 13 | As per item No 12 above but for columns, pillars, posts and struts complete all as specified. |
| 14 | M&L form work to sides of concrete foundations, footings bases of columns, rafts and raft beams, side and soffits of fdn and plinth beam and similar work, vertical or to better for flat rough finished surfaces of concrete complete all as specified. |
| 15 | M&L form work to sides of pillars, posts struts, piers, columns and stanchions of rectangular/square for rough finished surface of concrete. |
| 16 | M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed)n, less than 0.9mm dia complete all as specified. |
| 17 | As per item No 16 but 5mm dia and over upto and including 10mm dia for stirrups spaces and binders complete all as specified. |
| 18 | M&L for rendering 5mm thick on fair faces of concrete surface in CM 1:3 and rendering is to be finished even and smooth without using extra cement |
| 19 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as specified and as directed by Engineer-in-Charge. |
| 20 | Supply and fixing galvanised steel punched type concertina loop dia coil 610 mm dia when stretched (stretched to 8 mtr length with weight 13.25kg/coil) placing on top of the wall inside the Angle iron horns/GI barbed wire, tying with necessary GI wire complete all as specified and directed. |
| 21 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured. |
| 22 | M & L for preparation of new surfaces of any description, n.exc 10cm in width or girth when unconnected and applying two coat of synthetic enamel paint over one coat of primer as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender