Tender For Denting, Painting And Cabin Repairing Of Tipper Nos. Jh10af-5311 And Repair/Overhauling Of Fuel Injection Pump And Allied Mechanical Works Of Tipper No. Jh10ad-6806 At Area Auto Garage, Wj Area
Tender Value
2.62 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
8 days left
EMD
3870
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Denting, Painting And Cabin Repairing Of Tipper Nos. Jh10af-5311 And Repair/Overhauling Of Fuel Injection Pump And Allied Mechanical Works Of Tipper No. Jh10ad-6806 At Area Auto Garage, Wj Area
BOQ
| Sl. No. | Item Description |
| 1 | Denting, Painting and Cabin Repairing of Tipper Nos. JH10AF-5311 and Repair/Overhauling of Fuel Injection Pump and Allied Mechanical Works of Tipper No. JH10AD-6806 at Area Auto Garage, WJ Area |
| 2 | Vehicle No.-JH10AF-5311 |
| 3 | Removal & refitting of complete driver cabin assembly from chassis |
| 4 | Structural repairing and reinforced welding of cabin under-body channels/cross-members |
| 5 | Cutting out rusted section and welding new MS sheet on cabin floor |
| 6 | Complete denting and structural repairing of driver cabin including both LHS & RHS door shells |
| 7 | Replacement & welding of inner and outer sheet metal panels for both cabin doors |
| 8 | Denting & repairing of damaged front fascia/front show panel |
| 9 | Alignment and structural fitting of front show with cabin A-pillars |
| 10 | Denting Alignment & refitting of front steel bumper |
| 11 | Replacement and welding of damaged sheet metal on front bumper assembly (approx. 10 ft.) |
| 12 | Denting repairing and structural refitting of cabin foot steps |
| 13 | Replacement and welding of MS Sheet for both side foot steps and round structural profiles (approx. 14 ft.) |
| 14 | Repair & refitting of both LHS & RHS cabin mudguards along with structural support |
| 15 | Fabrication and welding of new sheets metal for mudguards inner shell and core sections (approx. 30 ft.) |
| 16 | Denting, gas-cutting and leak proof welding of diesel fuel tank assembly |
| 17 | Supply & replacement of door lock assemblies including locking mechanisms |
| 18 | Supply & fitting of new door hinges, outer/inner handles, and operating levers |
| 19 | Supply & replacement of window glass winding machine/ regulator assembly |
| 20 | Supply & replacement radiator grill including necessary locking mechanisms |
| 21 | Supply & fitting of LHS & RHS rear-view mirrors along with mounting brackets |
| 22 | Fabrication and fitment of new seating base and interior ceiling structure framework |
| 23 | Complete structural repairing of driver and co driver seats frames |
| 24 | Upholstery work including supply of high density foam, rexine and associated materials |
| 25 | Replacement & fitting of driver cabin interior roof lining/ceiling |
| 26 | Supply & fitting of Bonnet ‘T’ catch, accelerator and clutch pedal rubber boots/pads |
| 27 | Electrical wiring and fitment of headlights, parking lights, Hour meter (HMR) and audio visual reverse alarm |
| 28 | Complete vehicle exterior painting (inclusive of surface prep, primer, base coat and finish coats) |
| 29 | Vehicle No.-JH10AD-6806A:Fuel Injection (FI)pump & Nozzle Overhaul |
| 30 | Supply & replacement of FI Pump Rotor Head Assembly |
| 31 | Supply & replacement of FI Pump Cam Plate |
| 32 | Supply & replacement of FI Pump Rollers |
| 33 | Supply & replacement of FI Vane Pump/Feed Pumps |
| 34 | Supply & replacement of Fuel Injector Nozzles |
| 35 | Supply & complete FI Pump overhaul /Seal Kit |
| 36 | Precision machining and lapping of internal pump components |
| 37 | Chemical washing, cleaning and surface preparation of pimp parts |
| 38 | Assembly phase testing and calibration of FI Pumps on test bench |
| 39 | B: Suspension & Undercarriage Repairs |
| 40 | Supply & fitting of main Leaf Spring |
| 41 | Supply & fitting of Suspension U-Bolts |
| 42 | Supply & fitting of Leaf spring Center Bolts |
| 43 | Supply & fitting of Leaf spring Clamps (8 Inch) |
| 44 | Supply & fitting of Clamps fasteners bolts |
| 45 | Supply & fitting of suspension side washers |
| 46 | C: Allied Mechanical & Fluid System |
| 47 | Supply & Replacement of clutch Servo/Booster Assembly |
| 48 | Supply & Replacement of Engine Lube Oil Filter Assembly/Kit |
| 49 | Supply & fitting of rigid Brake Line/Pipe |
| 50 | Supply & fitting of Flexible Hose Pipe |
| 51 | Supply of Heavy Duty Brake Fluid |
| 52 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender