Tender For Remaining Work Of 2 Additional Class Room At Gsss Gatiyawali, Block - Chittorgarh, Dist - Chittorgarh
Tender Value
4.50 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
9000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chittorgarh → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Remaining Work Of 2 Additional Class Room At Gsss Gatiyawali, Block - Chittorgarh, Dist - Chittorgarh
BOQ
| Sl. No. | Item Description |
| 1 | PART-A (Building Work) Based on BSR PWD - 2022 Chittorgarh Circle |
| 2 | Earth Work:- Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 3 | P.C.C. IN FOUNDATION:- Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:5:10(1 cement:4 Coarse sand :8 gradeed stone aggregate 40 mm nominal size). |
| 4 | STONE MASONARY IN SUPER STRUCTURE:- Random Rubble stone masonry with hard stone in superstucture above plinth level and upto five level upto 30 cm and less thick wall in cement sand mortar 1:6 (1-Cement: 6- Sand) |
| 5 | Half Brick Masonary:-Half Brick masonry in super structure in 1:4 cement sand mortar complete as per item |
| 6 | Cement Concrete Under Floor:- Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level M10 grade Nominal Mix (with graded stone aggregate 40mm nominal size) |
| 7 | Door& Window Frames:- Provinding and fixing Steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide .<40x40x5 |
| 8 | Doors:-Providing and fixing M.S. sheet 1mm thick double leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint. Add 20% extra for double leaf shutters. (1714+.2*1714=2056.80) |
| 9 | Wire Gauge: Supplying & fixing fixed wire Gauge of 14 mesh X 24 Gauge to the Metal frame of rolled section by metal beading 20X3mm with suitable screw at not exceeding 150mm distance. |
| 10 | Guard Bars: P&F square bars or other flat welded to window/ventilators etc., Square bar 10mm |
| 11 | Flooring: Polished blue kota stone flooring, laid over 20mm thick base of CM 1:4 and jointed with gray cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 2000 sq.cm. 25 mm thick slab. Deduct for using kota stone other then blue in color. |
| 12 | Skirting: Polished blue kota stone skirting, laid over 20mm thick base of CM 1:4 and jointed with gray cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 2001 sq.cm. 20 mm thik slab. Deduct for using kota stone other then blue in color. |
| 13 | Steps: Polished Blue Kota stone slab in steps, risers, walls, pillars, having fine machine cut edges laid on 12mm (Av.) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 25 mm thick slab area 901 to 2000 sq.cm. Deduct for using kota stone other then blue in color. |
| 14 | Plaster: Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished : 20 mm thick |
| 15 | Plaster(Ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand) |
| 16 | Black Board : Plaster on new surface on wall in cement sand mortar 1:3 including raking of joints etc. complete fine finish: 12mm thick |
| 17 | GRADING:- Grading of roof for water proofing treatment with water proffing compound: Cement Mortar 1:4 (1Cement:4 Course Sand) |
| 18 | Gola Batta:- Providing gola 75mm x 75mm in cement concrete 1:2:4(1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge) including finished with cement mortar 1:3(1 cement: 2 fine sand) as per standard design. |
| 19 | Internal Finishing : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding. New work (two or more coats) over and including scrapping and priming coat with cement primer |
| 20 | Exterior Finishing:Finishing wall with water proofing cement paint of appd brand & manufacture and of reqd. shade to give an even shade including all scafolding New work (three or more coats applied at the rate of 3.84 kg/10 sqm) |
| 21 | PANTING ON DOORS & WINDOWS :- Painting with syntheitic enamel paint of approved brand and manufacture in all shade to give an even shade new steel work (2 or more coat on new work). |
| 22 | Coping: Cement concrete 1:2:4 (1 cement: 2 Course sand: 4 Greded stone aggregate) with water proofing compound with manufactures specification |
| 23 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110mm dia |
| 24 | Sub Total |
| 25 | Part - B Electric Work |
| 26 | Wiring of light point/fan point/exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS: 694) of approved make group-2 |
| 27 | Short point (up to 3 mtr.) |
| 28 | Medium point (up to 6 mtr) |
| 29 | Long point (up to 10 mtr) |
| 30 | Fan point |
| 31 | Short point (up to 3 mtr.) |
| 32 | Medium point (up to 6 mtr) |
| 33 | Long point (up to 10 mtr) |
| 34 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS: 694) of approved make in surface/reces group -2 |
| 35 | On board |
| 36 | S & F follwing sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using clamps, fastener as required including cutting the wall , covering conduit with wire mess and making good the same as required. Group-2 |
| 37 | 25 mm dia |
| 38 | Supplying and drawi;ng FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface ofr necessed conduit/ casting capping including making connections etc. as required. Group-2 |
| 39 | 2 x 1.5 sq. mm |
| 40 | 2 x 2.5 sq. mm |
| 41 | P & F 240/415 V MCB of breaking capacity not less than 10 KA (B/C/D tripping characteristic) ISI marked IS 8828 (1996)/conforming to IEC 60898 in existing board/ sheets including making connections with lugs, testing etc. as required. Group-2 |
| 42 | 6 A to 32 A rating |
| 43 | P & F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with 100 Amp copper copper bus bar, shorting link, neutral, earth link and din bar, conforming to IS 13032 & IS 8623 including making internal DB termination with copper lux, testing etc. as reqd. . group-2 |
| 44 | Single door(Single Phase) 8 way |
| 45 | P & F strip fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating/stove enamelled non corrosive UV resist EP channel) complete with accessories(Low loss copperchoke, starter, starter seat)/Electronic choke with terminal block duely prewired with copper conducter including making connection, testing etc. as required(Without tube) |
| 46 | 1x36 watts with OCCB. Group-2 |
| 47 | P & F Fluorscent tube rod in existing fixtures as required, minimum 3 star rating,36/40 watts |
| 48 | P/I aying PVC insulated & PVC sheathed cable of 1.1 kV grade with aluminium conductor of IS:1554 P-I of Groups of approved make in ground as per IS:1255 including excavation of 30cm x 75cm size trench, 25cm thick under layer of sand, Iind class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size 6 sqmm, 4 core arm |
| 49 | P & F star rated double ball beari;ng capacitor start, aluminium body and blade ceiling fan with down rod upto 30 cm with 3x1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required. |
| 50 | 1200 mm sweep 3 star rated |
| 51 | P & F IS:371 marked 6 amp surface type celling rose inculuding making commection testing etc. grup-2 (E071400) |
| 52 | P & F 18 SWG Sheet steel boxes duly finisded with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surfacae or in recessed as required. 175mmX 100mmX60mm (E050100) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender