Tender For Supply, Installation, Testing & Commissioning (Sitc) Of Cctv Cameras With Ofc Network Including 05 Years O&M At I/A Epip, Neemrana- I & Ii Neemrana
Tender Value
2.49 Crore
Estimated cost
Bid Submission
08 Sep 2026
16 days left
EMD
4.99 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing & Commissioning (Sitc) Of Cctv Cameras With Ofc Network Including 05 Years O&M At I/A Epip, Neemrana- I & Ii Neemrana
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 2 | Supply and erection of Galvanized Iron pole with galvanizing done in single dipping (Average coating thickness Minimum 65 Microns) continuously tapered poles having Octagonal / Circular cross-sections designed to withstand the maximum wind speed as per IS 875, The pole shaft shall be made from sheet steel (HT Steel Conforming to grade S355JO) and confirming to BSEN 10025 and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process. pole shafts shall be provided with the rigid flange plate of suitable thickness (Fe 410 conforming to IS 226 / IS 2062) with provision for fixing 4 no. foundation bolts, This base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside.The octagonal Poles shall have lockable door of approximate 500 mm length at the elevation of 500 mm from the Base plate with bakelite sheet having 6A SP MCB and 16 sqmm stud type connector ( 4 nos) inside the pole at door opening for cable connection of following length and dimension as per table P-01 with base plate and foundation bolt on the Existing cement concrete foundation.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR ., Poles with Octagonal Cross Section, 6 Mtr. |
| 3 | Supply and Fixing of Pole OEM fabricated hot dipped galvanised M.S. Overhang (48.3 X 3.25 mm) with cap (400 x 88.9 / 114.3 x 3.25 mm) over the existing poles. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR ., Double arm overhang |
| 4 | Supply & Installation of IP-20 & IK-08 , UL Listed Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with 'U'Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19\\" angles with wall mounting provision on wall. Accessories like: 1 No of 19\\" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19\\" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR ., 6 U Rack with Width 600 mm & Depth 400 mm + 100 mm |
| 5 | Supply, Installation, & Testing of 19\\" 1U Rack Mounted/ surface mounted aluminum/ CRCA 1.2mm powder coated, Singlemode glass Fiber Optic Cable Patch panel/LIU loaded with flangless/screwable duplex adapters for ST/E-2000/SC/LC/MT-RJ/PC type, It should have easy removable Top plate with push buttons, there should be a splice tray installed in the Patch panel/LIU which can handle the fiber cores, splice tray should be PC+ABS material, it should include accessories like mounting hardware, gormetts, heat shrink tubes/sleevs, screws, nuts to install the panel for rack/wallmount applications as per requirment complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR ., 24 Ports |
| 6 | Supply, Drawing and Testing, of stranded Single mode (9/125 µm) glass optic fiber cable, as per latest ammendments of TIA/EIA 568/ISO/IEC, construction of LSZH outer sheath cable, cable should be used for LAN and WAN back bones, . With its LSZH sheathing these cables should be ideal for indoor/outdoor installations in existing MS/PVC /HDPE Conduits/ slotted channels with ferruling at both ends for identification complete in all respect.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR ., 24 Fiber |
| 7 | Add Extra in item no. 11.1 to 11.4 for Laying Charges for cable through Vermeer machine by making pit at regular interval and repairing the pit after laying of cable with PCC/ Bitumin as required. |
| 8 | Supply , Installation, Testing and Comissioning of Hot pluggable Small Form Factor Pluggable (SFP Module), 1000BASE-LX, 1G Fiber Channel, LC Type Duplex Connector, 1310 nm laser transmitter, Should support distance upto 10 km on 9/125 um of data rate upto 1.25 Gb/s on bi-directional data links. Should also support industrial temperature, should have metal enclosure for lower EMI. The transceiver should be ROHS Compliant. (For Each SM Fiber) all switches & related Fiber modules should be of same make & category for seamless integration with each other of Enterprise class. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 9 | Supply, Installation, & Testing of Indoor duplex Singlemode patch cord (9/125 µm (OS1/OS2) made of glass fiber optic with LSZH jacket, F8 2.0x4.1 mm, yellow, singlemode G652.D (9/125 µm (OS1, OS2) Mounted on both sides with ST/E-2000/SC/LC/MT-RJ/PC type Duplex connectors in acc. with IEC 61754-20. Zirconia (ceramic) ferrule with a PC polished endface geometry, connectors should be tuned in accordance with IEC 61755-3-1 and qualified in acc. with IEC 61753-1 for category U (uncontrolled environment, duplex clip and white plastic dust cover, should comply to delta IL < 0.2 dB after 500 mating cycles, there should be an optional Visual coding, mechanical coding and lock protection on the patch cords which can be added on later stage. patch cords's performance should be acc. to IEC 61753-1 (Table A.12) as per latest ammendments of TIA/EIA 569B.3, as per requirements.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR ., Single Mode Patch Cord 1 Mtr. |
| 10 | Supply, Installation, OTDR Testing & Fusion Splicing of Fiber Singlemode Pigtail (9/125 µm (OS1/OS2) made of glass fiber optic, with semi-tight buffer PA/PBT, Ø 0.9 mm, yellow, singlemode G652.D (9/125 µm (OS1, OS2), should have length of min 1.5m, should be fitted at one end with any one type of single ST/E-2000/SC/LC/MT-RJ/PC type connector in acc. with IEC 61754-20, Should be delta IL < 0.2 dB after 500 mating cycles, It should be Zirconia (ceramic) ferrule with a PC polished endface geometry connector qualified in acc. with IEC 61753-1 for category U (uncontrolled environment). and qualified in acc. with IEC 61753-1, Performance acc. to IEC 61753-1 (Table A.12) as per latest ammendments of TIA/EIA 569B.3, Standard Specification as per requirments.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 11 | Supply & Installation of IP-20 & IK-08 , UL Listed Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet,Vertical Mounting Rail 1.6 MM with 'U'Marking, front sturdy sheet steel frame folded from one piece and welded with 5mm toughened glass door, with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, Set of 75 mm height 4 castors, 2 of which have brakes, Accessories like: 5 Nos of 19\\" 1U Horizontal Cable manager, 2 Nos of vertical cable managers, 1 no. Keyboard Tray, 4 Nos of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 2 No of 19\\" 1U, mountable socket strips with 6 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR ., 42 U Rack with Width 600 mm & Depth 800 mm |
| 12 | Supply , Installation, Testing and Comissioning of Managed Layer-2 Intelligent Giga Ethernet Switch providing 24 x 10/100/1000 MBPS Giga Ethernet ports and with min 4 SFP Giga Ports (provision for Fiber Giga connectivity) all switches & related Fiber modules should be of same make & category for seamless integration with each other of Enterprise class Catalyst Series including making connections etc as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 13 | Supply , Installation and Testing of 4 pair, 100 Ohm impedance, Cat 6/6A /Class E/Ea patch cords should be constructed of minimum 23/24 AWG, stranded bare Copper cable with FRPVC/LSZH Jacket, with an enhanced performance by factory moulded RJ45 connectors with strain relief boots as per ANSI/TIA/EIA 568-C.2 suitable for Cat 6/6A application complying to latest ammendments Category 6/6A Standards, According. to TIA568C.2, ISO/IEC 11801, EN 50173, IEC 60603-7-51, EN 60603-7, IEEE 802.3an minimum requirement for 1G BASE-T to 10G BASE-T performance. Patch cords shall be straight thru cable compatible with both T568-A and T568-B wiring schemes, should support IEEE 802.3af / IEEE 802.3at for POE applications, Minimum 750 to 1000 mating cycles in plug contacts for long durability, Should support Ethernet 10GBASE-T, 1.2 Gb/s ATM, Token ring 4/16, Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP).All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR ., Cat 6, U/UTP (Unscreened/Un-sheilded Twisted Pair) Patch Cord, 2 Mtr |
| 14 | Supply and installation of high tensile low carbon steel rod molecularly bonded with 99.9 % Copper thickness (250 microns) and confirming to UL 467, IS/IEC 62561-2 of following size and length and as per point mentioned (a), (b), [c), (d), (e) below :-, 17.2 mm thick and 3 Mtr. Long |
| 15 | P & F of Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 16 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR, 1 x 1.5 sq.mm |
| 17 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, round / flat strip armouring, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR, 1.5 Sq. mm, 3 core |
| 18 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR, Single pole MCB (With B/C curve tripping Characteristics), 6 A to 32 A rating |
| 19 | Supply , Installation, Testing and Comissioning of Inverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410 Green Refrigerant, wireless Remote control, suitable for working between 230V +/- 10% with low & high voltage cutoff and 50 hz , single phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR ., 1.5 TR ISEER not less then 4.6 |
| 20 | SITC of 4MP Varifocal Lens Bullet Camera with 60 Mtr IR with color night vision having below specification:Camera Type:IP Based;Type of Camera Housing:Bullet ;Image Sensor Type:CMOS;Image Sensor Size:1/2.7;Camera Image Sensing capacity (Picture Mode):4MP or better;Resolution:2688 × 1520;Day/Night Capable:Yes;IR illumination Range(mtr):60 or better, with White Light for Colour Image in Dark Night;IR Number :2 IR LED, 2 Warm light, Warm Light Range of 30 Mtr.;Lens Type:Motorized Varifocal;Focal Length(mm):2.7~13.5;Iris Control:Fixed Iris;Focus Mode:Auto;Frame Rate (fps):Main stream: 2688 × 1520@(1–20 fps) 2560×1440(1~25/30fps);0:Sub stream 1: D1@(1–25/30 fps); Sub stream 2: D1@(1–25/30 fps); Sub stream 3: D1@1fps;Video Compression:H.265 & H.264;Video Streams:Quard stream or better;Optical Zoom:5X;Digital Zoom:16x;Number of Audio Input Channel:1;Number of Audio Output Channel:1;Microphone Support:Built-in Mic;Alarm Support:Yes;Number of Alarm Digital Input:1;Number of Alarm Relay Output:1;Pre/Post Alarm Buffer:Yes;Multi Level User ID/Password:Yes;IP Address Filtering:Yes;Minimum Illumination for Capturing Color Image:0.006 lux or better;Electronic Shutter Speed(sec):1/3 s~1/100000s or better;WDR (Wide Dynamic Range):120 dB or better;SNR (Signal to Noise Ratio):>56 Db or better;White Balance:Yes;Auto Gain Control:Yes;Back Light Compensation:Yes;Remote Administration:Yes;ONVIF Support:Yes;Privacy Zones:4;Supported Protocols:SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP V3, TCP/IP, PPPoE, NFS, UDP, ICMP,SSL, DHCP, SMTP, RTSPS, ONVIF (Profile S, Profile G, Profile T), unicast, multicast;Storgae :SFTP, NAS, Mirco SD card (Max. 512GB);Protection:IP67 or better;Mounting Type:Wall;Power Input:12 VDC/PoE (802.3af);Min. Operating Temperature:-30deg C;Max. Operating Temperature:59deg C;Relative Humidity Non Condensing (%):95;Warranty:2 years;IVS:Motion Detection;Certification:BIS, STQC;GDPR, ISO9001:2015, ISO 14001:2015, ISO 27001:2022, ISO 45001:2018, IEC27032:2012, CMM Level 5, OEM of CCTV shall have direct presence in India and shall be registered in India under the Companies Act, 1956/ 2013 since last 10 year or more alos manufacturing facility in India since last Seven years or more and Foreign OEM shall have manufacturing unit globally from last 10 Years or more.,The OEM of CCTV shall have its office and service/ support center in Rajasthan, MAF and techincal compliance on OEM Letter Head to be submitted with bid. |
| 21 | SITC of 4MP 45x PTZ camera with 300 Mtr IR having below specifications: Effective Pixels:2688 (H) x 1520 (V);Image Sensor:1/2.8†4MP PS CMOS Image sensor (0.9071 centimeters);Minimum IR:0.005 [email protected] (Color, 30 IRE), 0.0005 [email protected] (B/W, 30 IRE), 0 [email protected] (IR on);;RAM:512 MB;ROM:256 MB;White Balance:Auto, Indoor, Outdoor, Tracking, Manual, Sodium lamp, Natural light, Street lamp;Lens:3.95 mm–177.75 mm;Max. Aperture:F1.6–F4.95;Angle of View:H: 65.7°â€“1.9°, V: 39.4°â€“1.1°, D: 73.1°â€“2.1°;Close Focus Distance:0.1 m–1 m;Iris Control:Auto, Manual;DORI Distance:Lens 3.95 mm-177.75 mm: 2,451.7mm (Detect), 972.9mm (Observe), 490.3mm (Recognize), 245.2mm (Identify);Electronic Shutter:1 s–1/30000 s;Back Light Compensation:BLC / HLC / WDR(120dB);S/N Ratio:≥55 dB;Optical Zoom:45×;Digital Zoom:16x;Image Rotation:180°;Image Stabilization:Electronic Image Stabilization (EIS);IR Distance:300 Mtr.;IR Number:6 (IR);IR Control:Zoom Prio, Manual, Smart IR, Off;Day/Night:Auto (ICR)/Color/B/W;Gain Control:Auto/Manual;Encode Strategy:Instastream, H.264+;Video Compression:H.264H, H.264B, H.264, H.265, MJPEG(Sub Stream);Resolution:2688 x 1520, 4M(2560 x 1440), 3M(2304 x 1296), 2MP (1920 × 1080), 720p (1280 × 720), D1, VGA, CIF;Frame Rate:Main stream: 4MP (2688 × 1520 )/ 4MP(2560x 1440)/ 3M(2048×1536)@(1–25/30fps), 1080p/720p / D1@(1–50/60fps) Sub stream 1: 720p /D1@(1–25/30 fps) Sub stream 2: D1/CIF @(1–25/30 fps);Stream Capability:3 Streams;Bit Rate:H265: 38 kbps–8192 kbps, H264: 96 kbps–8,192 kbps;Bit Rate Control:CBR/VBR; Motion Detection:Support;RS-485:1(Bit range: 1200 bps–9600 bps);ROI:Support;Audio Streaming:1/1 channel In/Out;Audio In:1 Channel;Audio Out:1 Channel;Audio Compression:PCM, G.711a, G.711Mu, G.726, MPEG2-Layer2, G722.1, G729, G723;Alarm I/O:7ch. in/2ch. out;Alarm Event:Motion/Tampering detection; audio detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection;Noise Reduction:2D DNR/ 3D DNR;Protocols:http, RTMP, IPv6, Bonjour, IPv4, DNS, RTCP, PPPoE, NTP, RTP, 802.1x, HTTPS, SNMP, TCP/IP, ONVIF (Profile S & Profile G & Profile T);Streaming Method:Unicast/Multicast;User/Host:20 (total bandwidth: 64 Mbps);Networking:RJ-45 (10/100Base-T);Tracking Trigger Event:Motion detection, Video tampering, Network disconnection, IP address conflict, Illegal access, Storage anomaly;Storage:Micro SD card (Up to 512 GB), FTP, NAS;Power Source:24 VDC, 2.5 A ± 25% PoE+ (802.3at);Power Consumption:Basic: 13 W Max: 25 W;Weather Proof Standard:IP67, IK10, TVS 8000V lightning proof, surge protection, voltage transient protection;Browser:IE 9 and later versions Chrome 41 and later versions Firefox 50 and later versions iOS 10 and later versions;Smart Phone:iPhone, iPad, Android Phone;Operating Temperature:–40 °C to +70 °C (–40 °F to +158 °F);Operating Humidity:≤ 95% (RH);Certification:BIS, STQC;GDPR, ISO9001:2015, ISO 14001:2015, ISO 27001:2022, ISO 45001:2018, IEC27032:2012, CMM Level 5, OEM of NVR shall have direct presence in India and shall be registered in India under the Companies Act, 1956/ 2013 since last 10 year or more alos manufacturing facility in India since last Five years or more and Foreign OEM shall have manufacturing unit globally from last 10 Years or more.,The OEM of CCTV shall have its office and service/ support center in Rajasthan, MAF and techincal compliance on OEM Letter Head to be submitted with bid. |
| 22 | SITC of Core Switch 48-Port SFP, Layer 3+ Managed Gigabit Switch having specifications: Console Port: 10/100/1000BASE-T RJ-45 port for out-of-band CLI management;Interfaces:Ports: 48 x SFP ports, 2 x 10GBASE-T ports, 4 x 10G SFP+ ports;Management Port:10/100/1000BASE-T RJ-45 port for out-of-band IP management;Stacking Ports:4;USB Ports:1 x USB 2.0 Type A port;Performance: Switching Capacity: 216 Gbps, 64-Byte Packet Forwarding Rate: 161 Mpps, Packet Buffer Memory: 4 MB; Ventilation:4 x Smart fans, Should have 802.1D STP, 802.1w RSTP and 802.1s MSTP Spanning Tree Protocol and ERPS as per standard ITU-T G.8032 to provide protection for Ethernet traffic in ring topology. should support IEEE 802.1Q VLAN with different type of VLAN like Port based, Voice VLAN, Auto Surveillance VLAN, Asymmetric VLAN, Private, Double (Q-In-Q), Multicast VLAN (ISM VLAN for IPv4/IPv6), 802.1v Protocol VLAN ,VLAN Trunking, Super VLAN, GVRP. support Static route for both IPv4 and IPv6, OSPFv1, v2 & v3, RIP V1/V2/ng. Policy-based Route (PBR). TCP Null Scan, TCP Xmas Scan, TCP SYNFIN, Ping of Death Attack and TCP Tiny Fragment attack. DHCP snooping and DHCP server screening, DHCP server. QoS priority like Strict Priority Queue and Weighted Round Robin, Strict + WRR. support sFlow for monitoring traffic in data networks, SNMP v1, v2c, v3 and SNMP Traps and RMON. Operation Temperature:[0 to 50 ËšC (32 to 122 °F)];Storage Temperature:[-40 to 70 ËšC (-40 to 158 °F)];Operating Humidity:10% to 90% RH; Storage Humidity: 5% to 90% RH. Certificates FCC, CE and Safety Certifications UL, MTCTE (TEC-ER) Certification: ISO 45001, ISO 27001, ISO 9001, ISO 14001, ISO 14064-1, Industrial Cyber Security Capability (Like - IEC-62443-4-1:2018); OEM Documents:MAF & Technical compliance on OEM letter head. OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India. |
| 23 | SITC of PVC Box- For Camera with All accessories |
| 24 | SITC of Duct 40/33 mm underground and 1 OFC pulling into HDPE duct |
| 25 | SITC of OFC Joint enclosure 24F |
| 26 | SITC of Manhole for UG OFC Joint with Joint closure and accessories |
| 27 | Switch Should Support 8 Port 10/100/1000Mbps RJ45 port PoE Ports (Auto MDI-MDIX) , 2 Port 1G SFP. Switch should have 130 W power budget. Switch Should Support Min. 20 Gbps Switching Capacity and Forwarding Rate is 14.88 MPPS. Should support IGMP Snooping, Able to create 250 or more IGMP groups, IGMP snooping querier and require support for IGMP Snooping Fast Leave. Should have 802.1D STP, 802.1w RSTP and 802.1s MSTP Spanning Tree Protocol. 4K VLAN and Auto Surveillance VLAN, Asymmetric, Should support Loopback detection (LBD) to detect the loop created by a specific port. should support IEEE 802.1Q VLAN tagging for Ethernet frames. Different type of VLAN like Port based, Auto Surveillance, Auto Voice, etc. should be available for configuration. support QoS (quality of service) IEEE 802.1P for traffic prioritization. It should support 8 queues per port. support default routing and static routing with minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries. support at least 4 nos. IPv4 / IPv6 IP Interfaces. Support at least 700 access control entries. should support safeguard engine for automatically throttles the impact of packet flooding into the switch's CPU. Require prevention of DoS attacks, which include Land, Blat, TCP Null Scan, TCP Xmas Scan and TCP SYNFIN. should able to create a binding table for IP + MAC + Port to prevents a malicious user from spoofing or to restrict the unauthorized users. support 802.1X RADIUS and local server database authentication. Should have dual Image support to enhance the reliability of the switch. should support surveillance switch mode for easy discovery of ONVIF compliance camera and NVR. IPv6 Ready Compliance. support Link Layer Discovery Protocol (LLDP) and LLDP-MED. Operation Temperature: -5° to 50° C. Certification: CE, FCC, RoHS and UL, MTCTE (TEC-ER), Certification: ISO 45001, ISO 27001, ISO 9001, ISO 14001, ISO 14064-1, Industrial Cyber Security Capability (Like - IEC-62443-4-1:2018); OEM Documents:MAF & Technical compliance on OEM letter head. OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India. |
| 28 | SITC of 64 Channel Network Video Recorder NVR having specification: IP Camera Input:64 Channel;Processor:Industrial-grade processor;Operating System:Embedded LINUX;User Interface:Web, Local GUI;Video Output:2 VGA: 1920 × 1080, 1280 × 1024, 1280 × 720 2 HDMI: 3840 × 2160, 1920 × 1080, 1280 × 1024, 1280 × 720 Heterogeneous video source output for HDMI1 and HDMI2 Simultaneous video source output for VGA1 and HDMI1 Simultaneous video source output for VGA2 and HDMI2;Video Compression:Instastream, H.265, H.264+, H.264, MJPEG;Decoding Capability:AI disabled: 2 Channel 32 MP@25 fps, 2 Channel 24 MP@25 fps, 4 Channel 16 MP@30 fps, 5 Channel 12 MP@30 fps, 8 Channel 8 MP@30 fps, 10 Channel 6 MP@30 fps, 12 Channel 5 MP@30 fps, 16 Channel 4 MP@30 fps, 32 Channel 1080p@30 fps AI enabled: 1 Channel 32 MP@25 fps, 1 Channel 24 MP@25 fps, 2 Channel 16 MP@30 fps, 4 Channel 12 MP@30 fps, 6 Channel 8 MP@30 fps, 8 Channel 6 MP@30 fps, 8 Channel 5 MP@30 fps, 12 Channel 4 MP@30 fps, 24 Channel 1080p@30 fps;AI by NVR:Face detection, Face recognition, Perimeter protection, SMD Plus;AI by Camera:Face detection, Face recognition, Video metadata (Human, Motor vehicles, Non-motor vehi- cles), Perimeter protection, SMD Plus, Stereo analysis, Crowd distribution, People counting, ANPR, Vehicle density, Heat map;IntelliCheck AI by Camera + Recorder:Max. 32 Channel, 1 combined event per Channel/s;Resolution:32 MP, 24 MP, 16 MP, 12 MP, 8 MP, 6 MP, 5 MP, 4 MP, 3 MP, 2 MP, 720p, 960p, D1, CIF, QCIF;Network Bandwidth:AI disabled: 384 Mbps incoming, 384 Mbps recording and 384 Mbps outgoing AI enabled: 200 Mbps incoming, 200 Mbps recording and 200 Mbps outgoing;Video Display Split:Main screen: 1/4/8/9/16/25/36/64, Sub screen: 1/4/8/9/16;Perimeter Performance AI by NVR (Number of Channels):4 Channels, 10 IVS rules for each Channel;Perimeter Performance of AI by Camera (Number of Chan- nels):All channels (16 targets/s);Face Attributes:Gender, Age group, Glasses, Expressions, Face mask, Beard;Face Detection Performance of AI by Recorder (Number of Channels):2 Channels (up to 12 face images/s each Channel);Face Detection Performance of AI by Camera (Number of Channels):16 channels;Face Database Capacity:Up to 20 face databases with 20,000 images, with a total capacity of 2.5 G. Name, gender, birthday, address, credential type, credential No., countries & regions and state can be added to each face image.;Face Recognition Performance of AI by NVR (Number of Channels):1. 16 Channel FD (by camera) + FR (by NVR), image stream: 16 face images/s 2. 2 Channel FD (by NVR) + FR (by NVR), video stream: 12 face images/s;Face Recognition Performance of AI by Camera (Number of Channels):16 channels;SMD Plus by NVR:8 Channels: Secondary filtering for human and motor vehicle, reducing false alarms caused by leaves, rain and lighting condition change;SMD Plus by Camera:All Channels (32 targets/s);Metadata Performance of AI by Camera (Number of Chan- nels):8 Channels;Human Attributes:Top color, Top type, Bottom color, Bottom type, Hat, Bag, Age, Gender and Umbrella;Motor Vehicle Attributes:License plate, Plate color, Vehicle body, Vehicle model, Vehicle logo, Calling, Seatbelt, Vehicle Interior, Vehicle registration location;Non-motor Vehicle Attributes:Vehicle model, Vehicle color, Number of persons, Helmet;ANPR by Camera (Number of Channels):All Channels (8 Targets/s);License Plate Database Capacity:1. Create up to 20,000 plate numbers. 2. Blocklist and allowlist;Abnormality Alarm:Camera ofline, storage error, disk full, IP conflict, MAC conflict, login lock, abnormal behaviour of fan, cyber security exception;Intelligent Alarm:Face detection, Perimeter protection, Face recognition, Video metadata (Human, Motor vehi-cles, non-motor vehicles), SMD Plus, Stereo analysis, Crowd distribution, People counting, ANPR, Vehicle density, Heat map;General Alarm:Motion detection, local alarm, alarm box, camera external alarm, network alarm, scene chang- ing, PIR alarm, thermal alarm;Alarm Linkage:Record, snapshot (panoramic), local alarm output, IPC external alarm output, access control- ler, audio, buzzer, log, preset, email;Audio Input:1 Channel RCA;Audio Output:2 Channel RCA;Audio Compression:G.711a, G.711u, PCM, G726, AAC;Disk Group:Support;Alarm Input:16 Channel;Alarm Output:8 Channels (1-channel 12 V 1 A output);Hard Disk:8 SATA ports, each disk can contain up to 20 TB. This limit varies depending on the environ- ment temperature;Multi-channel Playback:Up to 16 Channels;Record Mode:General, Motion detection, Intelligent, Alarm, POS;Backup Method:USB device and network;Playback Mode:Instant playback, General playback, Event playback, Tag playback, Smart playback (face and motion detection);Smart Phone:iPhone, iPad, Android Phone;RAID:RAID 0/1/5/6/10;Interface Ports:4 (2 front USB 2.0 ports, 2 rear USB 3.0 ports), 1 eSATA Port, 1 RS232, 2 RS485 (1 port for half- duplex serial communication,(Note-Other Specification attached with tender documents) |
| 29 | SITC of Surveillance storage HDD 6 TB |
| 30 | All-in-One Desktop Intel® Coreâ„¢ i5/Ultra5-,Minimum 21.5 inch display,With Minimum 16 GB DDR5 and 1TB SSD along with Keyboard and Mouse. , With Windows |
| 31 | SITC of 4K HDMI Cable - 5 Mtr |
| 32 | SITC of 75-inch LED at the control room for Camera monitoring having specification: Screen Size: 75 inches; Resolution: 3840x2160; Pannel Technology: VA; Brightness: >500 cd/m2; Contrast Ratio(Min.): 4000:1 or better; Response time (Mili Second): <10 ms; Viewing Angle (Horizontal:Vertical): 178:178; Operation Hours: 24x7; Life time: >50000 Hrs; Orientation: Portrait & Landscape;Duty Cycle 24*7; Input: HDMI (2, HDCP 2.2/1.4),HDMI (1, HDCP 1.4), DP (1, HDCP 2.2/1.3); Output: DP, Audio:Stereo Mini Jack; External Control: RS232C In / Out ; RJ45 (LAN); Operating System:Tizen; Audio: Built-in (10W×2); Internal Memory: 8 GB; Power Supply: 100-240V~, 50/60Hz; Operating Temperature: 0°C ~ 40°C; Operating Humidity (%RH): 10 % ~ 80 %; Certifications: Model specific UL,BIS,FCC,RoHS; MAF and techincal compliance on OEM Letter Head to be submitted with bid. |
| 33 | SITC of 5 KVA Online UPS Nominal Voltage:- 220V/230V/240V AC (1Ph+N+PE, 3 Wire), Operating Voltage Range:- 110V~305V AC Load Dependent, Operating Frequency Range:- 50 / 60 Hz ± 10% (Auto Sensing), Power Factor:- >0.99, Output Voltage/Power Factor :- 220V / 230V / 240V AC / ±1% / 0.8 Std., 0.9/1.0 Optional, Output Frequency:- Auto Sensing 50 / 60 Hz ± 1~10% Sync Mode (Configurable), 50/60 Hz ± 0.1 Hz Battery Mode, Harmonic Distortion (THDv) :- ≤1%, Crest Factor :- 03:01, Efficiency :- Upto 94.0%, BATTERY:- 192V - 240V, Charge Current:- 0.10-0.25C Configurable,Typical Recharge Time:- 5-6 Hours (90% of full capacity), Display: Input Voltage/Frequency, Output Voltage/Frequency, Battery Voltage, Load Watt/VA and %, Temperature, Fault Codes, Battery & Load Bar Graph., LED Indications: Normal Operation, Bypass, Abnormal, Fault, and Battery Mode., Alarms & Protection: DC Low/High, Inverter Under/Over Voltage, UPS Overload, Short Circuit, and Fault Protection.,Overload Capability: Up to 120% load for 10 minutes and above 130% load for 1 minute., Transfer Time: AC to Battery – 0 ms; Inverter to Bypass – 4 ms (Typical).,Operating Temperature: 0°C to 45°C.,Storage Temperature: -15°C to 60°C.,Humidity & Altitude: 0–95% RH (Non-condensing) and altitude below 1500 meters., Noise Level: Maximum 52 dBA., Quality Standards: ISO 9001, ISO 14001, ISO 45001, and RoHS compliant. All ISO certifications must be verifiable through the IAF certification database. Required Certifications: EPR, IEEMA, VAPT Certification (Cyber Security Compliance as per ISA/IEC 62443-1) from a Government-recognized CERT-In (MeitY) empanelled vendor for SNMP Card and CMS Software, and D&B A2 Certification. Safety Compliance: IEC/EN62040-1. EMC/Performance Compliance: IEC/EN62040-2, IEC/EN62040-3, and CE Compliance.Standard Communication Interface: RS-232. Optional Communication Interface: SNMP/Modbus.Make in India: UPS must be manufactured under the Make in India initiative. Blacklisting Declaration: Bidder/OEM must not have been blacklisted by any PSU, Financial Institution, Educational Institution, Government Establishment, or Defense Organization during the last 5 years. Turnover Requirement: OEM must have a minimum average turnover of ₹250 Crore from Indian operations during the last 3 financial years, supported by a CA Certificate. Indian Presence Requirement: OEM must possess a valid GST Number, PF Number, and Factory License in India. Industry Experience: UPS OEM must have a minimum of 25 years of presence in the UPS industry in India.MAF and techincal compliance on OEM Letter Head to be submitted with bid. |
| 34 | SITC of 26AH/12V battery at control room |
| 35 | O&M for next 5 year from the date of installation The Scope of work includes 1. Comprehensive on site maintenance, troubleshooting of all cameras. If any camera, cable, monitor or any equipment, hardware is found faulty bidder shall replace or repair with no extra cost to RIICO to make the system operational. 2. Maintaining the OFC network with related accessories to make camera s operational. 3.Maintaining the electrical cable network with related accessories to make camera s operational. 4. Contractor will arrange High speed Broadband connection 100 Mbps with public IP for Online monitoring of Cameras5. Contractor will arrange atlest 01 Manpower round the clock for managing all system 6.Pole on which CCTV Installed damaged due to any reason contractor will repair or change the pole and will Install again at his own cost. 7. If any fault come in transformer, then Contractor will Contact the JVVNL and will get the transformer repaired from JVVNL.Contractor will be responsible for the security of all the system and will keep entire watch and ward of the system at his own level. No extra payment will be made for any material for repair or replacement during O and M. Rates Should be inclusive of all taxes etc(If Due to any reason any cameras, server room and any other hardware fails then contractor will repair within 24 hours) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender