Tender For Repairs To Certain B/R Nature Work And Another Allied Works For Md Accn For Zone B At Age B/R-I Under Ge (W) Agra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Sep 2026
16 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Certain B/R Nature Work And Another Allied Works For Md Accn For Zone B At Age B/R-I Under Ge (W) Agra
BOQ
| Sl. No. | Item Description |
| 1 | S&F 15mm bore CPVC Pipes SDR11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors at any height including dismantling of GI tubes complete all as specified and directed. |
| 2 | S&F 20mm bore CPVC Pipes SDR11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors at any height including dismantling of GI tubes complete all as specified and directed. |
| 3 | S&F 25mm bore CPVC Pipes SDR11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors at any height including dismantling of GI tubes complete all as specified and directed. |
| 4 | S&F in replacement 15mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 5 | Refixing tubing 15 mm bore with new fittings and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. (Note: Old serviceable pipe obtained from item No. 04 will be re-used in this item) |
| 6 | S&F in replacement 20 mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 7 | Refixing tubing 20 mm bore with new fittings and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. (Note: Old serviceable pipe obtained from item No. 06 will be re-used in this item) |
| 8 | S&F in replacement 25 mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 9 | Refixing tubing 25 mm bore with new fittings and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. (Note: Old serviceable pipe obtained from item No. 08 will be re-used in this item) |
| 10 | S&F in replacement rotational moulded polyethene water storage tank 500 ltr capacity, three layer, hoisted and fixed in position including PVC cover, plug, 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) and check nuts complete all as specified and directed by Engr -In-Charge. |
| 11 | S&F in replacement rotational moulded polyethene water storage tank 1000 ltr capacity, three layer, hoisted and fixed in position including PVC cover, plug, 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) and check nuts complete all as specified and directed by Engr -In-Charge. |
| 12 | Cleaning and removing all scale and dirt, etc, from tanks (capacity exceeding 250 ltr but not exceeding 500 ltr) and from mouths of circulating pipes, etc, by disconnecting and reconnecting the tanks in same position. |
| 13 | Cleaning and removing all scale and dirt, etc, from tanks (capacity exceeding 500 ltr but not exceeding 1000 ltr) and from mouths of circulating pipes, etc. by disconnecting and reconnecting the tanks in same position. |
| 14 | Demolition of cement concrete (unreinforced) in any description and in any position removing debris out side the MD land complete all as specified and directed. |
| 15 | M&L for Cutting holes in brick walls in Cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall not exceeding half brick, complete all as specified and directed. |
| 16 | M&L for 75mm thick Cement concrete type B- 2, 1:2:4 (using 40mm graded stone aggregate) for sub base including demolition of cement concrete and removing debris outside the MD land complete all as specified and directed. |
| 17 | M&L for 40mm thick Cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) for PCC flooring including demolition of cement concrete and removing debris outside the MD land, complete all as specified. |
| 18 | M&L for 38mm wide glass dividing strips, 3mm thick, inserted in position, conform to design, complete all as specified and directed. |
| 19 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 including demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed by Engr-In-Charge. |
| 20 | M&L for 10 to 12 mm thick ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over interior surface of wall and M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper with roller application over and including a coat of primer and two or more coat wall care putty on new plastered surfaces to achieve even and smooth surface complete all as specified and directed. |
| 21 | M&L for 10 to 12 mm thick ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over exterior surface of wall and M&L Preparing newly plastered surfaces of wall and applying two coats of exterior emulsion paint over and including a coat of primer with roller application and two or more coat of wall care putty to achieve smooth and even surface complete all as specified and directed. |
| 22 | M&L for 5 mm thick ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) ceiling surface including taking down old plastred surface and preparation of newly plastered surfaces of ceiling and applying three coat of white wash including taking down cement or cement lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water and complete all as specified and directed. |
| 23 | M&L for 10 to 12 mm thick ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over interior surface of wall including M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of primer and two or more coat wall care putty to obtain smooth surface including taking down cement or cement lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr -In-Charge. |
| 24 | M&L for 10 to 12 mm thick ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over exterior surface of wall M&L for preparation of newly plastered surfaces of walls and applying two coats of two coats of exterior emulsion paint over and including a coat of primer and two or more coat weather proof wall care putty including taking down cement or cement lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr -In-Charge. |
| 25 | M & L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down cement or cement lime plaster of any description on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified (Payment for providing grooves shall be made separately). |
| 26 | M & L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately). |
| 27 | M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge |
| 28 | M &L for preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.by Engr-in-Charge |
| 29 | M &L for preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of oil bound distemper complete all as specified and directed by Engr-in-Charge |
| 30 | M &L for preparation of old decorated plastered or unplastered surfaces of wall including washing , rubbing down and stopping of distempered surface and applying one coat of distemper oil emulsion paint white or tinted to achieve smooth and even surface complete all as specified and directed by Engr-in-Charge. |
| 31 | M & L for complete removal of existing treatment of old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over and including a coat primer over and including two or more coat wall care putty to achieve smooth finish complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick, (square/rectangular) area of each tile exc 0 .06 Sqm but not exc 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 10 mm thick screed bed in CM 1:6 complete including dismantling floor, hearth wall tiling including cement and sand mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed. |
| 33 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick, (square/rectangular) area of each tile exc 0 .11 Sqm but not exc 0.18 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 10 mm thick screed bed in CM 1:6 complete including dismantling floor, hearth wall tiling including cement and sand mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed. |
| 34 | M&L Vitrified coloured tiles 7.5 to 10mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.36 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick screed bed or bedding layer of cment mortar (1:6) complete including dismantling floor, hearth wall tiling including cement and sand mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed. |
| 35 | M&L for coloured glazed ceramic tiles in vertical surface 450 x 300 x 7mm thick or larger size set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall including dismantling floor, hearth wall tiling including cement and sand mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed. |
| 36 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid bedded or and pointed in any mortar etc complete all as specified and directed. |
| 37 | M&L 75mm thick cement concrete 1:4:8 type D-2 (by using 40mm graded stone aggregates) as in path, sub floor and similar works all as specified and directed. |
| 38 | M&L for chequered cement concrete tiles 30 cm x 30 cm x 20 mm thick, with grey cement and pigments, set & jointed in neat cement slurry and pointed with grey cement & pigment in floors laid over and including 20 mm thick screed bed or bedding layer including dismantling existing tiles with screed bed complete all as specified and directed. |
| 39 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm-50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver locks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; all as specified by engineer-in-charge. |
| 40 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 20mm thick screed bed in CM 1:6 complete all as spd and directed. |
| 41 | M&L for Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 20mm thick screed bed in CM 1:6 complete all as spd and dir. |
| 42 | M&L for 20mm thick Granite (of any type) work (table rubbed and Mirror polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed bed in CM 1:6 complete all as spd and dir. |
| 43 | M&L for 40mm thick sand stone slabs, dressed close picked on exposed faces, set and jointed in cement and stone dust mortar 1:3 and pointed in cement mixed with approved pigment to match, complete all as specified and directed. |
| 44 | M&L for endura step stone 15mm thick as in floor, staircase, landing, etc laid and jointed in CM 1:6 or tiles adhesive complete all as specified and directed. |
| 45 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 46 | M&L for cleaning of buses/plants/hedge etc on roof/wall/ or around manholes / sewage line girth not exceeding 30cm, complete all as directed. |
| 47 | Removing existing water proofing treatment of any description from roof slabs, cleaning the surface using wire brushes etc, roughening the concrete surfaces picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 kg of cement per Sqm (Where PCC padding is to be provided) complete all as specified. |
| 48 | M & L for preparation of old roof surfaces by brooming and watering, cleaning all dust particles and providing PCC (1:2:4) type B-0, (using 12.5 mm graded crushed stone aggregate) with water proofing compound as per manufacturer instruction as in paddding/ levelling course of average thickness not exceeding 25mm complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately. |
| 49 | M & L for water proofing treatment of RCC Slab as per following stages:(A) Surface preparation :1. Curing of the surface will be done properly to avoid any cracks over the surface.2. One coat of SBR Will be done over all the corners of the surface.3. Angle fillet will be made all over the corners.4. Repairing of all the drainage pipe & khura.5. Applying One coat of SBR Mixed in Ratio of 1.1 with Cement as Base coat.(B) Priming the surface : Applying one coat of primer of Fosroc roof Guard with 50% water dilution all over the surface up to 12 inches over the parapet walls to gain better adhesion.(C) Liquid Membrane application :Supplying and applying Fosroc Roof Guard Premium acrylic + PU based exposed waterproofing reducing up to 10-degree Celsius temperature over the surface applying two crisscross coats of the product with brush with laying of glass fibre mesh all over the surface for better elasticity.Complete all as per manufacturer's instructions and approved applicator complete all as specified and directed.Note:- 1. The contractor shall submit a garantee of 10 year from the date of completion of work for waterproofing treatment alongwith manufactures's garantee. The amount of Rs 40 ( Forty) per sqm and min of Rs. 4000/- for waterproofing treatment shall be withheld from contractor's final bill till the expiry of gurantee period. The contractor at his own option may furnish fix deposit receipt pledged in favour of GE(W) Agra against gaurantee money.2. The water proofing shall be carried out by authorised applicator of manufacturer. The name of applicator shall be got approved from GE before commencement of work. Please Enable Macros to View BoQ information |
| 50 | M & L for water proofing treatment of RCC Slab as per following stages:(A) Surface preparation :1. Curing of the surface will be done properly to avoid any cracks over the surface.2. One coat of SBR Will be done over all the corners of the surface.3. Angle fillet will be made all over the corners.4. Repairing of all the drainage pipe & khura.5. Applying One coat of SBR Mixed in Ratio of 1.1 with Cement as Base coat.(B) Priming the surface : Applying one coat of primer of Fosroc roof Guard with 50% water dilution all over the surface up to 12 inches over the parapet walls to gain better adhesion.(C) Liquid Membrane application :Supplying and applying Fosroc Roof Guard Premium acrylic + PU based exposed waterproofing reducing up to 10-degree Celsius temperature over the surface applying two crisscross coats of the product with brush with laying of glass fibre mesh all over the surface for better elasticity.Complete all as per manufacturer's instructions and approved applicator complete all as specified and directed.Note:- 1. The contractor shall submit a garantee of 10 year from the date of completion of work for waterproofing treatment alongwith manufactures's garantee. The amount of Rs 40 ( Forty) per sqm and min of Rs. 4000/- for waterproofing treatment shall be withheld from contractor's final bill till the expiry of gurantee period. The contractor at his own option may furnish fix deposit receipt pledged in favour of GE(W) Agra against gaurantee money.2. The water proofing shall be carried out by authorised applicator of manufacturer. The name of applicator shall be got approved from GE before commencement of work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender