Tender For Cleaning Of Ug Sumps, Oh Tanks, Filteration Plant And Water Treatment Items Under Ge Nasik Road C .
Tender Value
50 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
14 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cleaning Of Ug Sumps, Oh Tanks, Filteration Plant And Water Treatment Items Under Ge Nasik Road C .
BOQ
| Sl. No. | Item Description |
| 1 | Taking out filter media from filter beds of filteration plant at Waldevi Pump House of all size sands & gravels of 12000 gallons/hrs and 18000 gallons/hrs capacity and depositing whereas directed to a distance not less than 50 m for cleaning out and screening out all as specified and directed. |
| 2 | Supply and filling new filter media of filteration plant at Waldevi Pump House consisting of Gravels - 25mm in the filter bed of uniform size in layers complete all as specified and directed. |
| 3 | All as per Item No. 2.00 above, but 15mm |
| 4 | All as per Item No. 2.00 above, but 6mm |
| 5 | Sand 10/20 Mesh |
| 6 | Sand 20/30 Mesh |
| 7 | Dismantling and taking out unserviceable PVC/copper nozzles from filter beds complete all as directed |
| 8 | Refixing the blocked PVC/copper Nozzles from filter beds after cleaning by air /wash complete all as directed. |
| 9 | S&F in replacement copper nozzles air wash type fixed to filter stainer in the filter beds including making good adjointing disturbed area complete all as specified and directed. |
| 10 | S&F PVC nozzles air wash type fixed to filter stainer in the filter beds including making good adjointing disturbed area complete all as specified and directed. |
| 11 | Dismantling & taking out PVC corrugated sheets from filteration plant complete all as directed. |
| 12 | M&L for fixing PVC corrugated sheet not less than 2mm thickness cut in required length/size and fixed as fins at filteration plant complete all as directed. |
| 13 | M&L for Cutting dismantling of rusted MS rods, angles iron of fins support and taking out all as directed. |
| 14 | M&L for MS fabricating works made out of 12mm dia bar and 50x80x6mm thick angle iron cut into required length and welded on horizontal railing of MS angle for fins support in clarifier all as per site condition at filteration plant. |
| 15 | Dismantling and taking out broken hume pipe laid in filter beds and stacking where directed of size 80/150mm dia. |
| 16 | M&L for PVC heavy duty pipe thickness not less than 7mm of 80 mm dia working pressure 10 Kg/cm2 with required necessary holes on PVC pipe for flowing pure water from the filter beds complete with fixing necessary PVC fittings such as reducer & bend, tees/branch connection etc all as directed. |
| 17 | M&L for PVC heavy duty pipe thickness not less than 7mm of 150 mm dia with required necessary holes on PVC pipe for flowing pure water from the filter beds complete with fixing necessary PVC fittings such as reducer & bend, tees/branch connection etc all as directed. |
| 18 | Supply, install in replacement of Steel rolling shutters having thickness of laths 1.25 mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete: push pull or manual type all as specified and dircted. (40 SQM -02 Nos including winder) |
| 19 | M&L for servicing, greasing and overhauling of mannual rolling shutter upto 10 Sqm size complete including T&P charges, grease and other parts required at site for functional of rolling shutter complete all as specified and directed. |
| 20 | M&L for 4,00,000 gallons capcity draining water from OH reservoirs not exc. 21 m head/staging and cleaning internal portion of tank (bottom and walls) by means coir/wire brush etc. and wash the internal portion of tanks by using bleaching powder @ 25 grams per 1000 ltrs of water after removing sludge and mud etc and depositing the same to a distance not exc 50 m and writing letters with white paint (date of cleaning and capcity of tank) on black painted surface of tanks all as directed.(Note:- All safety eqpts and lights required for cleaning shall be arranged by the contrcator.) |
| 21 | All as per Item No. 20.00 above, but for 3,2,5000 gallons capcity |
| 22 | All as per Item No. 20.00 above, but for 1,00,000 gallons capcity |
| 23 | All as per Item No. 20.00 above, but for 50,000 gallons capcity |
| 24 | All as per Item No.20.00 above but not exc .16 m head / staging and capacity 1,00,000 gallons. |
| 25 | All as per Item No. 20.00 above, but for 75,000 gallons capcity |
| 26 | All as per Item No. 20.00 above, but for 50,000 gallons capcity |
| 27 | All as per Item No. 20.00 above, but for 1,00,000 ltrs capacity |
| 28 | M&L for 1,00,000 gallons capacity (tanks devided in two poritons) draining water from UG reservoirs, cleaning internal portion of tank (bottom and walls) by means coir / wire brush etc. and wash the internal portion of tanks by using bleaching powder @ 25 grams per 1000 ltrs of water after removing sludge and mud etc and depositing the same to a distance not exc 50 m and writing letters with white paint (date of cleaning and capcity of tank) on black painted surface of tanks all as directed.(Note:- All safety eqpts and lights required for cleaning shall be arranged by the contrcator.) |
| 29 | All as per Item No. 28.00 above, but for 25000 gallons capcity |
| 30 | All as per Item No. 28.00 above, but for 36000.00 gallons capcity |
| 31 | All as per Item No. 28.00 above, but for 1,00,000 gallons capcity |
| 32 | All as per Item No. 28.00 above, but for 1,00,000 ltrs capcity |
| 33 | All as per Item No. 28.00 above, but for 50,000 ltrs capcity |
| 34 | Supply only following items for Water filteration plant for cleaning/ Purification of water at filteration plant. |
| 35 | (a) Supply only Pig Lead all as specified |
| 36 | (b) Supply only Spun Yarn all as specified |
| 37 | (c) Supply only Calcium based high strength Granular Chlorination Chemical with corrosion Inhibator & Anti Scalant 40-45 kg drum, to reduce fire hazard in place of high ambient temprature. (Specifications: available chlorine % by mass min 65, stability loss of chloride on basis of available chloride max 1/15, particle size (passing through 1.70mm IS sieve) % by mass min 99.5, water insoluble matter max 6%, calcium hydroxide max 4%, sodium chloride max 15%). |
| 38 | (d) Supply only Alum Ferric grade-II good quality with additional requirement of purification of water containing lead (as per PH) 30 PPM maximum and arsenic (as 203 maximum) conforming to IS-229/1989 (forth revision) with amendment No. 1 & 2 complete for water treatment . |
| 39 | (e) Supply only Crystal clear allum ferric good quality G-I as per IS specifications for swiming pool. |
| 40 | (f) Supply Only PVC Bib Cock 15 mm size. |
| 41 | (g) Supply Only PVC Bib Cock 20 mm size |
| 42 | (h) Supply only stainless steel reinforcement Asbestos packing gland size 8,10, 12, 16 mm and 6 m long. |
| 43 | (i) Supply only Copper lugs Heavy Duty 70 Sqmm |
| 44 | (j) Supply only Copper lugs Heavy Duty 120 Sqmm |
| 45 | (k) Supply only Submersible Tape |
| 46 | (l) Supply only Nylon Rope 14 mm |
| 47 | (m) Supply only Bangadi Pipe 100 mm |
| 48 | (n) Supply only Bangadi Pipe 150 mm |
| 49 | S&F in repair LED aviation 8.5 W light fitting for OH Tanks with comprising of aluminium housing with polycarboante enclosure with all mechanism, IP 66 protection complete all as specified and directed. |
| 50 | Area clearance/levelling/excavation/digging at MES installations at any width and length by using JCB complete all as directed.Note 1. The cost of POL included in quotated rates.2. After Start and finsh of the work, Hrs slips shall be provided by the contrcator3. LOG Sheet shall be maintained. |
| 51 | M&L for scrapping of existing surface by use of steel brush of Centrifugal pumps/VT Pumps and painting the centrifual pumps with two coats sky blue paint synthetic enameled complete all as directed.Location: Waldevi, Dharna pump house |
| 52 | M&L for calibration of existing water flow meter located at Dharna Pumping Station through OEM/Govt Auth agency.Note: Calibration certificate shall be submitted after testing |
| 53 | M&L for earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of plate not less than 1.5 m below ground level connecting to the GI strip 32x6mm, by means of nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 40 mm incl provision of concrete pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 m long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 m, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing completion and removal of old earthing complete”. |
| 54 | S&F in repair main power supply copper Cable size 2.5 Sq mm x 3 core, FRLSH, armoured complete including necessary clamping complete all as directed (for AVN Light cable) |
| 55 | M&L for Dismantling ,Taking up/down of Old Cables with joints complete all as specified and directed. |
| 56 | Supply, lay & testing cable PVC insulated, unsheated bright annealed bars copper conductor single core PVC insulated PVC round sheated multicore industrial cables 1100 Volts grade, cross-sectional area of 70 Sqmm. |
| 57 | All as per Item No. 56.00 Above but 120 Sqmm Single Core |
| 58 | Supply lay & testing flat Submersible copper cable 3 Core 1100 Volts grade, cross-sectional area of 4 Sqmm 3 Core |
| 59 | All as per Item No. 58.00 above but 10 Sqmm 3 Core |
| 60 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep and getting out in soft loose soil all as specified and directed |
| 61 | Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed |
| 62 | Removing excavated soil to a distance not exc 50 m and deposited where directed at a level not exceding 1.5 m abvoe the starting point all as specified and directed. |
| 63 | M&L for Double Walled Corrugated DWC Pipe of outer dia 50mm and innter dia 38 mm including 90 degree bends with including coupler and rubber ring laid in trenches of size 90 mm suitable for cable protection complete all as specified and directed. |
| 64 | S&F CI sluice valve100 mm dia both ends flanged and drilled, bonnet wedge stuffing box, Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846 and its fittings suitable for hydraulic test pressure of 16 Kg/sqcm PN 1.6 ISI marked complete all as specified and directed. Make: Kirloskar |
| 65 | All as per Item No. 64.00 above but for 150 mm dia Sluice valve |
| 66 | All as per Item No. 64.00 above but for 200 mm dia Sluice valve |
| 67 | S&F repair MCCBs 630 Amps 4 pole 50 kA, Frame size -SKB-3 adjustable thermal setting 70-100% all as directed. |
| 68 | S&F repair MCCB 800 Amps 4 pole 50 kA, Conforms to IS/IEC 60947 -2 as directed. |
| 69 | S&F repair MCCB 250 Amps 4 pole 36 kA, Conforms to IS/IEC 60947 -2 all as directed. |
| 70 | S&F in repair DOL Motor starter 7.5 HP in sheet-steel enclosure type MK-1 (Motor Rating AC-3 Duty, 415V, 50Hz, 3-Ph) and Relay Range 9-14..Make : L&T Cat No SS 96210 or Equivalent in Siemens |
| 71 | S&F in repair valve operating wheel cap (Cast iron) inserting of nut bolt with 20 mm GI pipe length 4 m long with Tee rod suitable for 100mm dia |
| 72 | All as per Item No. 71.00 above but 150mm dia |
| 73 | All as per Item No. 71.00 above but 200mm dia |
| 74 | M&L for cleaning/clearing of vegitation/ creepers on chain link fencing at the installations and disposing off as directed complete including painting of synthetic enamel silver paint on chain link fencing complete all as specified and directed. |
| 75 | M&L for cleaning/clearing of vegitation around the installations and disposing off as directed including spraying of grass killer chemical spray with the help of spray pump complete all as specified and directed. |
| 76 | S&F galvannised strip 32x6mm with saddles & fixing screws etc. complete all as specified and directed. |
| 77 | Taking up 150 mm dia water pipe mains incuding flanged rubber joints with spigot and socket ends and lead joint burning out and recovering lead. |
| 78 | Supply and lay 150 mm dia DI pipes K-9 (tyton joint ) with spigot and socket ends centrifugally cast, Class LA, in any length laid in trenches complete all as specified and directed.Make: TATA / Jindal saw /Srikalahasthi Pipes Ltd/Jai Balaji Industries Ltd.Note :- Excavation, Earthwork, DI fittings shall be measured and paid seperately under respective items. |
| 79 | NOTE: AMOUNT OF SCHEDULE OF CREDIT Rs. 1,97,945.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender