Tender For Electrification & Beautification Of Newly Constructed Adventure Park At Lata Mangeshkar Garden In Prabhag No 24, Lakadganj Zone No 08.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Aug 2026
12 days left
EMD
40500
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrification & Beautification Of Newly Constructed Adventure Park At Lata Mangeshkar Garden In Prabhag No 24, Lakadganj Zone No 08.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 2 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 3 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). |
| 4 | Supply, Installation, Testing and Commissioning of exterior rated 3000k / Mono IP68 LED Strip light having beam angle of 110deg, sealed with anti-UV polyurethane without color shifting and anti-UV aging. Lumen output from 400Lm/Mtr. having maximum wattage of 25W for 5m, Product width not more than 12mm, better color consistency for visual comfort, DC 24VDC, Class III for safety use Long lifespan 30K hrs. L70B50@35deg C, Lead cable with suitable numbers of clip,screw,end caps ,mounting tracks, diffuser and waterproof connector. The luminaire should provided with Operating Temperature : -40°C to +50°C , BIS Certified Mandatory and must be submitted for records. LM-80 Reports and test certificates for luminaire will be submitted post the issuance of LOA to the successful bidder and before the supply of material. LED Strip light must be supplied along with necessary mounting accessories, tracks, diffuser, powersupply and other items as applicable. Complete installation with foundation arrangment & in proper cagging for safety. Complet with all accessories.with 3 years warranty. |
| 5 | Supply, installation, testing & commissioning of LIGHT FIXTURE. Spot Light 10-15 W , LED,RGBW, (Ethernet Compatible), IP 66. The housing in light weight, made of high strength die cast aluminium and coated by static powder making it weather Projector Light 10-15 W, (resistant Protection screen in while tempered glass with high impact resistance. High precision dial ensures precision angle adjustment. Premium thermal management by high heat conductivity aluminim alloy and thermal fins, the fixture IP66 rated. (Power LED Module with high heat efficacy LED's, on printed Circuit Board with metal core plate. Electronic Power Supply for LED module, which offers Protection against short circuit Over- Voltage & Over - Current with in built surge protection. Lens made of PC which should offer beam angle as per site requipment. Estimated LED Lifetime is L70-50,000 hours minimum LM80 report from LED Manufacture should be submitted for the concerned engineer incharge for approval of light fixture. (Projector Light 20-30W, ) Luminaire performance & safety : IEC 60598, IS 10322-5 IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015, IES, LM 79, & TTC certificates should be provided from NABL accredited lab. Certification: CE Certified, ROHS compliant, BIS Certification for luminaries & Drivers. (Including all accessories with safety measures) with 3 years warranty. |
| 6 | SITC of 3 MTR DECORATIVE MS PIPE POLE with MONO COLOUR LED CNC Cutting portion of 750MM . Top of 75mm and bottom of 100mm with base plate .The pole shall be PU painted as per directed by engineer -in -charge . Pipe shall be of suitable thickness as per IS2713 Wind pressure & load calculation for pole structure of wind speed 39mps should be as per 15 875(part3) 2015 botton of the pole shall have inbuilt junction box weather proof flush door & locking arrangment. 30- 35 W LED post top fitting housing made of die cast inium body & top with spun aluminum with UV stabilized prismatic diffuser IP66 rates & IK08 Class Protection, 100lm/w,2700k- 3000K- auto cut off at greater than 240v rated voltage with range of 120-270v, surge protection of 10KV. Life at L70 50000 burning hours. with 3 years warranty. |
| 7 | Supply, Installation Testing and Commissioning of LED garden spike light not more than 8W-10W having system output of mimiman 500 Lumens, CRI> 80, CCT 2700/3000K, Full IP 65 protected, aluminium housing, operating voltage of 100 to 240 V, 50Hz, operating temperature of -40 to +50 °C, IK06 protection luminaire must have beam angle of 20deg Makes Similar to Orient, Bajaj, Surya, Wipro, Reytek |
| 8 | Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2. |
| 9 | Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 10 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB |
| 11 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB |
| 12 | Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB |
| 13 | Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB |
| 14 | Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 15 | Supplying and erecting marine (Waterproof) plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete with compliance to IS 720:2010 |
| 16 | Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 17 | Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A having 15mm (Width) X 3 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CPBB |
| 18 | Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall. |
| 19 | Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. |
| 20 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 21 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB LT/AL |
| 22 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 23 | Supplying & erecting three phase, 415V, street light control panel up to the max load of 6kW, TPN MCB 40A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation. |
| 24 | Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP |
| 25 | Providing & erecting floor/wall mounting, MCCB panel board, with door, suitable for four pole incoming 250A, 6 ways four pole outgoing, up to 100 A MCCBs on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCBs) |
| 26 | Providing & erecting incoming and outgoing cable alleys suitable for MCCB panel board with door, 250A incoming and 6 way outgoing or 400A incoming and 4 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB. |
| 27 | Providing & erecting 4 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB. Note:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. |
| 28 | Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP. |
| 29 | Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps) |
| 30 | Supplying and laying HMS PVC conduit FRLS grade 20mm dia. With necessary accessories in RCC work/falseceiling/false flooring as per specification No. WG-MA/CC. |
| 31 | Supplying and laying HMS PVC conduit FRLS grade 25mmdia with necessary accessories in RCC work/falseceiling/false flooring as per specificationNo. WG-MA/CC. |
| 32 | Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/insidepole / Busbarsor any other places as per specification No: WG-MA/BW |
| 33 | Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/Busbars or any other places. as per specification No: WG-MA/BW |
| 34 | Supplying and erecting mains with 2x4sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/insidepole/Busbars or any other places as per specification No: WG-MA/BW |
| 35 | Supplying and erecting PVC insulated PVC round sheathed 1.5sq.mm (30no.x0.25mmdia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV |
| 36 | Supplying and erecting PVCi nsulated PVC round sheathed 2.5sq.mm(50no.x0.25mmdia.) 3 core flexible multistranded copper Industrial cable for voltage grade up to 1.1 kV |
| 37 | Supplying and erecting modular type switch 6A/10A duly erected on provided plate and box with wiring connections complete. |
| 38 | Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. |
| 39 | Supplying and erecting modular type 3pin 6A multi socket with safety shutter, duly erected on provided plate and box withwiring connections complete |
| 40 | Supplying and erecting modular type 3pin 6/16A multi socket with safety shutter, duly erected on provided plate and box withwiring connections complete. |
| 41 | Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. |
| 42 | Supplying and erecting modular type blanking plate one module,dulyerected on provided plate & box. |
| 43 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 44 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 45 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 46 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background |
| 47 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 48 | Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG- PW/CW |
| 49 | Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG PW/CW |
| 50 | Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG PW/CW |
| 51 | Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 52 | Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 53 | Supplying & erecting ready touse Retro fit T8 LED 18/20tubelight with polycarbonate body, heat sink, integratedHF electronic driver complete& compatible toT8 /T12 LED luminaire by disconnecting starter&ballast if necessary. |
| 54 | Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF |
| 55 | Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab |
| 56 | Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. |
| 57 | Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. |
| 58 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs,with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB |
| 59 | Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB |
| 60 | Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 61 | Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 62 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6 to 8m octagonal / conical GI pole). |
| 63 | Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 64 | Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification noEA-EP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender