Tender For A) 33/11 Kv Line Shiiftting & Ercp Canal General Manager Rwgcl Piu Tonk Under Aen (O&M) Jpd Karwar
Tender Value
25.67 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
9 days left
EMD
51340
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bundi → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for A) 33/11 Kv Line Shiiftting & Ercp Canal General Manager Rwgcl Piu Tonk Under Aen (O&M) Jpd Karwar
BOQ
| Sl. No. | Item Description |
| 1 | Part-A |
| 2 | Conducting route survey as per approved route map and pegging of route with tee off point section point & double pole locations. |
| 3 | Trimming of tree branches/plants and preparing route approchases for proposed line. |
| 4 | Excavation of pit in Hard soil (15% extra shall be payable for the designated desert area panchayat samities of jodhpur discom in pursurance to JdVVNL order no. 1240 dt. 18.07.13) |
| 5 | (A) Height of Poles / Size of pit |
| 6 | 9 Mtr./1.2m x 0.6 m x 1.5 m deep |
| 7 | (B) Lattic Tower |
| 8 | 12.8/12.6 mte/1.5mX1.5mX2.10m Deep |
| 9 | ( C ) Stay Set / Depth of Pit |
| 10 | 8'x3/4\\"-0.75x 0.5x1.6m |
| 11 | 6' x 5/8\\" -0.75 x 0.5x1.35 m deep |
| 12 | Excavation of pit in ordinary rock which does not require blasting to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit. |
| 13 | (A) Height of Poles / Size of pit |
| 14 | 9 Mtr./1.2m x 0.6 m x 1.5 m deep |
| 15 | (B) Lattic Tower |
| 16 | 12.8/12.6 mte/1.5mX1.5mX2.10m Deep |
| 17 | ( C ) Stay Set / Depth of Pit |
| 18 | 8'x3/4\\"-0.75x 0.5x1.6m |
| 19 | 6' x 5/8\\" -0.75 x 0.5x1.35 m deep |
| 20 | Safe carriage of 9 M long PCC Pole including loading /unloading |
| 21 | (c) 9 Mtr. Long 200 Kg. PCC Pole |
| 22 | Within 10Km |
| 23 | Above 10Km & kupto 30 Km Add for each Km or part thereof |
| 24 | Safe carriage of steel ( fabricated and unfabricated) I.e. M.S.Rails, RS joists, MS Channel,MS Angles,MS Flat, GI Stay Sets,GI Stay wire ,GI wire Nuts & Bolts etc. ACSR Conductor including loading/unloading and stacking in Nigam store at site. |
| 25 | Within 10Km |
| 26 | Above 10Km & kupto 30 Km Add for each Km or part thereof |
| 27 | Insulator, hardware, cable, breakers, kiosks, pannels etc. including loading/inloading and stacking in Nigam Stores etc. |
| 28 | Within 10 Km. |
| 29 | Above 10 Kms. & upto 30 Kms. Add for each Kms. Or part thereof. |
| 30 | Safe Carriage of Fabricated lattice tower structures and sub-station structure type AB,AB Beams isolators structure etc.including loading /unloading and stacking in the Nigam Store/at work site. |
| 31 | Within 10 Km. |
| 32 | Above 10 Kms. & upto 30 Kms. Add for each Kms. Or part thereof. |
| 33 | Safe carriage of 11/.4KV 3 phase distribution transformer including / unloading from store to site. |
| 34 | (A) 10&16 KVA |
| 35 | Within 10 Km. |
| 36 | Eraction of all type of steel supports in the excavated pit in alignment after chacking the same with plumb line including fixing of cross arms and top Hampers before erecting the supports. The support should be grouted and muffed in cement concrete of ratio 1:3:6 as per item No. 5.7 the ramaining portion of the pit will be back filled with soil the nuts & bolts will be provided by the contractor as per Nigam's specification for which payment will be made at the prevailing store issue rates. The cost muffing and grouting will be paid extra. |
| 37 | Lattice sturcture |
| 38 | Erection of PCC Poles in excavated pit with fixing of brackets, cross arms & top hampers as required in alignment after checking the same with plumb line. The support is to be back filled with soil with proper ramming. The nuts & bolts are to be provided |
| 39 | IN RURAL AREA |
| 40 | PCC Pole 9 Mtr. Long. (200 Kg.) |
| 41 | Erection & assembly of 2 pole structures of steel supports or PCC poles in excavated pit in alignment after checking the same wit plumb line. Including fixing of top bracing of MS Channel with pilot plates and clamps. The support is to be back filled wit |
| 42 | PCC Poles 9 Mtr. Long (200 Kg.) |
| 43 | Dimentelling Charge 60% |
| 44 | Erection & fixing of GI stay sets with anchor plates in excavated pit in required position and back filling with soil with proper ramming. The work includes fixing of sstay clamp stay insulator with stay wire at both ends with proper tension. Size of sta |
| 45 | 8'x3/4\\"with 7/8SWG Stay wire |
| 46 | 6'x5/8\\" with 7/10 SWG stay wire |
| 47 | Providing and laying of cement concrete in ratio 1:3:6 using 43 grade cement,river sand and 12 mm to 20 graded Blast Cerusher Broken in pit /Foundation According to the Size / Type of supports /stay including compaction/Curing for 21 daysin steel plates shuttering/farmer base (size 1.2 X1.2 X 2.1) |
| 48 | Supplying and laying of rendum rubble stone boulder having weight not less than 20 kgs . |
| 49 | Fixing of all Type of Fabricated Material on erected supports with nuts & Bolts as per approved design & drawing of sub -Station |
| 50 | Fixing of 33 KV B&S type disc insulator of 11KV lines ( each unit consiting of 3 nos. disc & 1 set of H/W ) on terminal point inclluding fixing of hardware and strips. |
| 51 | Fixing of 11KV T&C type disc insulator of 11KV lines ( each unit consiting of 1 nos. disc & 1 set of H/W ) on terminal point inclluding fixing of hardware and strips. |
| 52 | Fixing of 33 KV pin insulator with pins. |
| 53 | Dismentelling Charge 60% |
| 54 | Fixing of 11KV pin insulator with pins. |
| 55 | Dismentelling Charge 60% |
| 56 | Fixing and assemble of disc point channel pair with pilot plates top hampers & clamps on erected single pole structure as per design. The nut & bolts will be supplied by the contractor as per Nigams specification for which payment will be made as per prev |
| 57 | 33 KV Line |
| 58 | 11 KV Line |
| 59 | Installation testing as per Nigam's norms & commissioning of 11/.44 KV distribution transformer on erected support including fixing of base channels as per requirement jumpering on HV & LV.side crimping of lugs/claimping earth connections of body and n |
| 60 | 10 and 16 KVA |
| 61 | Dismetelling Charge 60 % |
| 62 | Laying,jointing,stringing,tensioning and clamping of conductor with proper sag as directed,using bolted type hardware including binding on pin insulator,jumpering on section points with binding wire/P.G.clamps. Aluminium jointing sleeved will be used for |
| 63 | (B) IN RURAL AREA |
| 64 | ACSR Dog Conductor |
| 65 | Dismentelling ACSR Dog Conductor |
| 66 | Dismentelling ACSR Weasel Conductor |
| 67 | ACSR Rabbit Conductor |
| 68 | Laying , jointing,stringing,tensioning and clamping of G.I.Earthwire continuosly on single/double pole by using earth clamps /nuts & bolts with washers and earth reel etc.including proper binding at each end.The nuts and bolts will be supplied by the contractor for which payment will be made as per prevailing Discom store issue rates. |
| 69 | (B) IN RURAL AREA |
| 70 | G.I.Earth wire 6 SWG |
| 71 | Drawing & stringing of G.I. 4 wire over the guarding bracket for guarding of road crossing/P&T crossing, Railway track crossing (for one span only) with cross G.I.wire laces at an interval of one meter each or required as per location using EYE bolt, nuts and bolts with washers etc. including binding. The EYE bolts and other nuts and bolts will be provided by the contractor for which payment will be made as per prevailing Discom store issue rates. |
| 72 | (a) 4 Wire stringing |
| 73 | 8 SWG with laces of 10 SWG |
| 74 | Earthing of 11/0.4 KV distribution transformer/sub-station and sub-station structure, lighting arresters, separetely with stay wire/GI wire with 3 pcs of MS rod 20-mm dia each 3 meter long and driving into earth by mechanical means as per approved design. |
| 75 | Painting with priming coats or ready mixed red-oxide paint 2 coats of approved make on steel works after cleaning with wire brush / sand paper.(including cost of red oxide) |
| 76 | On New surface |
| 77 | Painting with aluminium paint of approved brand and manufacturer to give an even surface.(including cost aluminium paint) |
| 78 | On New works with one coats. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender