Tender For Notice Inviting E-Tender For Design Supply Installation Testing & Commissioning Of 01 Nos. 10 Passenger/Service Gearless Machine Room Elevator In Replacement Of 01 Old Freight Lifts In Student Mess, Including Civil And Electrical Work At I
Tender Value
19.60 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
39500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Notice Inviting E-Tender For Design Supply Installation Testing & Commissioning Of 01 Nos. 10 Passenger/Service Gearless Machine Room Elevator In Replacement Of 01 Old Freight Lifts In Student Mess, Including Civil And Electrical Work At Iim, Lucknow (The Bidder Are Requested To Thoroughly Read & Understand The Tender Document, Specification Etc And Site/Working Condition Before Quoting The Rates)
BOQ
| Sl. No. | Item Description |
| 1 | LIFT WORK |
| 2 | Design, Fabrication, Supply, Installation, Testing, and commissioning of Electric Traction Type fully automatic Gearless Machine Room Passenger/service Elevator having SS Enclosure (Grade 304) with AC variable voltage & variable frequency drive unit suitable for operation on 415 +/- 10 % V, 3 Phase, 50 Hz. AC supply, having a speed of 1.00 MPS, power operated SS Telescopic Door opening/Side Opening type car & landing doors, electro-magnetic brake system, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, emergency light, intercom suitable for hook up to Facility's EPABX, infrared red sensing door protection for full height (min 2200mm height) & mechanical safety by the pressure sensor, reverse phase relay on controller, fire man's switch at ground floor, digital car positions indicator in car with up / down direction indications, light fixtures, ventilation fan, landing sill, main beam in shaft for machine, pit ladder, provision of lighting in elevator shaft, CCTV provisioning etc. complete with all accessories serving different floors in the lift shaft along with Automatic Rescue Device. Apart from the hardware part, the programming of software for running must be included.(ARD) with dry maintenance-free sealed batteries and Manual Emergency Rescue Device with or without lever-operated (independent of any battery system), complete as required and as per enclosed specifications for each MRL elevator with the following characteristicsi) Elevator Type - Passengerii) Capacity- minimum 10 passengers, 680 Kgiii) Stops and Openings- 2 Nov) Travel Speed- 1.0 mps |
| 3 | ELECTRICAL WORK |
| 4 | Supplying and drawing 2 x 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor, single core cable, in the existing surface/recessed steel/PVC conduit as required. |
| 5 | Supplying and fixing 20 mm dia. medium class PVC conduit along with accessories in surface/recess, including cutting the wall and making good the same in case of recessed conduit, as required. |
| 6 | Supplying and fixing 5/6 A modular switch on the existing modular plate & switch box, including connections, as required. |
| 7 | Supplying and fixing 3-pin 5/6 A modular socket outlet on the existing modular plate & switch box, including connections, as required. |
| 8 | Supplying and fixing 8-way, double door, single pole and neutral, sheet steel MCB distribution board, 240V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted, including earthing etc. as required (excl. MCBs/incomer). |
| 9 | Supplying and fixing 5A to 32A rating, 240/415V, 10kA, 'C' curve, miniature circuit breaker (MCB) suitable for inductive load, single pole, in the existing MCB DB, complete with connections, testing and commissioning etc. as required. |
| 10 | Supply, Installation, Testing and Commissioning of maintenance-free Chemical Earthing Electrode complying with latest IS 3043/IEC/IEEE — 3m long, 17mm dia, high-tensile copper-bonded steel rod (min. 250 microns electrolytic copper), with min. 10 kg soil-enrichment compound, backfilled with good-quality soil, complete. |
| 11 | Supplying and laying 8SWG Copper Wire for eathing |
| 12 | Supplying and fixing GI box, 1 or 2 module (75mm x 75mm), along with modular base & cover plate, for modular switches in recess, as required. |
| 13 | Supplying and fixing of 10/12W Bulkhead light (bare-lamp fixture, e.g. machine room / lift pit / shaft lighting), including connections, as required. |
| 14 | Supply, Installation, Testing and Commissioning of 100A, 16kA, TPMCCB as main incomer isolator, complete with its own sheet-steel enclosure/cover box (surface mounted). |
| 15 | Supplying and fixing of 300mm four blade Exhaust Fan for machine room, including connections, as required. |
| 16 | CIVIL WORK |
| 17 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 18 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in – charge: for nominal concrete 1:4:8 or leaner mix. |
| 19 | Dismantling marble work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar |
| 20 | Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and conforming to 1S:15622, of approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.30 kg / sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily. Size of tile 800x2400 mm of all colours and shades. |
| 21 | Cement plaster work with coarse sand: 15 mm cement plaster of mix: 1:6 (1cement: 6coarse sand). |
| 22 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type: Fastener with threaded dia 12 mm |
| 23 | FORM WORK: Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. |
| 24 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chaijjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 25 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 26 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. TMT bars FE 500D Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender