Tender For maintenance of Completed Scheme Under N/A-Ii Horticulture Zone.Sh:- Providing And Installation Of Open Gym Equipments With Buy Back Of Old Equipment In Tikona Park & 1040 Ews Houses Dda Park. (Specialized Work).
Tender Value
16.32 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
5 days left
EMD
32645
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of Completed Scheme Under N/A-Ii Horticulture Zone.Sh:- Providing And Installation Of Open Gym Equipments With Buy Back Of Old Equipment In Tikona Park & 1040 Ews Houses Dda Park. (Specialized Work).
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE -A |
| 2 | Providing and fixing \\"Air Walker\\" with the specifications below: 1. Dimensions (LxWxH): 1100 x 450 x 1300mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make.3. U-shaped main frame of NB 80mm (G.I.) \\"C\\" Class Pipe, Leg Support frame of NB 50mm (0.1) \\"C\\" Class Pipe.4. Handy frame pipes of NB 32mm (G.I.) \\"C\\" Class (NB stands for Nominal Bore i.e., Internal Diameter of pipe in millimetres).5. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.6. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Baseplate cover made of virgin LLDPE plastic by rotational molding with a minimum of 4.00mm thickness, UV resistant and coloured.9. Foothold made of Co-Polymer Plastic with rounded edges to prevent impact and injury. 10. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured.11. The equipment must be fitted with inbuilt limiters to prevent unwanted movements.12. The equipment is to be fixed on the ground by providing and laying Cement Concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.13. High tensile steel with galvanized nut bolts is used for assembly.14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with a baseplate cover.15. Equipment made to G5 Mark, EN16630, DIN 79000 & 150 14001 International standard for outdoor fitness equipment.16. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.17. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 3 | Providing and fixing a double\\" Sit-Up Station\\" with the below specifications: 1. Dimensions (LxWxH): 1500 x 1150 x 650mm.2. Fabricated with a main frame of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make.3. Main frame of NB 25mm (G.I.) \\"C\\" Class Pipe.4. Leg support of NB 65mm (G.I.) \\"C\\" Class Pipe ('NB' stands for Nominal Bore i.e., Internal Diameter of pipe in millimetres). 5. Fixed on its top is back support made of perforated MS sheet of 2mm thickness.6. All pipes are powder-coated using Akzo Nobel or equivalent paint of 80-120 micron thick.7. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs.8. Zinc primer paint is applied at all welding points prior to finishing.9. Baseplate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and coloured.10. The equipment is to be fixed on the ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.11. Once the concrete is set, the equipment is fixed on to it.12. High tensile steel with galvanized nut bolts is used for assembly.13. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.14. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years & maintenance cost for next 3 years @ 3% of the cost.15. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 4 | Providing and fixing \\"Air Swing\\" in pair with the below specifications:1. Dimensions (LxWxH): 1150 x 900 x 1250 mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make. 3. Leg Support frame of NB 50mm (G.I.) \\"C\\" Class Pipe. 4. Handle support frame of NB 32mm (G.I.) \\"C\\" Class Pipe. ('NB' stands for Nominal Bore i.e., Internal Diameter of pipe in millimetres).5. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.6. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Handle bars are provided with high-end quality rubber grips.9. Baseplate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and coloured. 10. Foothold made of MS Sheet Metal with rounded edges to prevent impact and injury.11. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured. 12. The equipment must be fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is to be fixed on the ground by providing and laying Cement Concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.14. Once the concrete is set, the equipment is fixed on to it and the nuts and bolts are covered with a baseplate cover.15. High tensile steel with galvanized nut bolts is used for assembly.16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.17. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.18. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 5 | Providing and fixing \\"Horse Rider Station\\" with the specifications below:1. Dimensions (LxWxH): 1000 x 600 x 1100 mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make.3. Main frame of NB 65mm (G.I.) \\"C\\" Class Pipe. 4. Handle support frame of NB 50mm (G.I.) \\"C\\" Class Pipe and other pipes of 4 NB 32mm & NB 25mm (G.I.) \\"C\\" Class Pipe. ('NB' stands for Nominal Bore i.e., Internal Diameter of pipe in millimetres).5. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.6. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing.8. Baseplate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and coloured.9. Foothold made of NB 32mm (G.I.) \\"C\\" Class Pipe. 10. Seat to be made up from virgin LLDPE manufactured by rotational moulding with 4.00 mm thickness, coloured, UV resistant and environmentally friendly.11. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured. 12. The equipment must be fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is to be fixed on the ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.14. Once the concrete is set, the equipment is fixed on to it and the nuts and bolts are covered with a baseplate cover. 15. High tensile steel with galvanized nut bolts is used for assembly.16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 17. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.18. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 6 | Providing and fixing \\"Leg Press\\" in a pair with the below specifications:1. Dimensions (LxWxH): 2000 x 550 x 1600 mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make.3. Seat Main frame of NB 50mm (G.I.) \\"C\\" Class Pipe and Pipe connecting main post to seat main frame of NB 65mm (G.I.) \\"C\\" Class Pipe. ('NB' stands for Nominal Bore i.e., Internal Diameter of pipe in millimetres).4. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints. 5. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs.6. Zinc primer paint is applied at all the welding points prior to finishing.7. Baseplate cover made of virgin LLDPE plastic by rotational molding of 4.00mm thickness, UV resistant and coloured.8. Foothold is made of NB 50mm (G.I.) \\"C\\" Class Pipe.9. Seats made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, are coloured, UV resistant and environmentally friendly. 10. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured.11. The equipment must be fitted with inbuilt limiters to prevent unwanted movements.12. The equipment is to be fixed on the ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.13. Once the concrete is set, the equipment is fixed on to it and the nuts and bolts are covered with a baseplate cover.14. High tensile steel with galvanized nut bolts is used for assembly.15. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.16. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.17. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 7 | Providing and fixing \\"Pull Chair\\" in a pair with the below specifications:1. Dimensions (LxWxH): 2400 x 800 x 2000 mm.2. Fabricated with main post of NB 100mm (G.L.) \\"C\\" Class Pipe of approved make. 3. Seat main frame of NB 50mm (G.L.) \\"C\\" Class Pipe, Pipe connecting main post with handle frame of NB 65mm (GL) \\"C\\" Class Pipe.4. Handle frame of NB 32mm (G.L.) \\"C\\" Class Pipe. (\\"NB\\" stands for Nominal Bore i.e., Internal Diameter of pipe in millimetres).5. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.6. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing.8. Handle bars are provided with high-end quality rubber grips.9. Baseplate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and coloured.10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, coloured, UV resistant and environmentally friendly.11. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured.12. The equipment must be fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is to be fixed on the ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with a baseplate cover.15. High tensile steel with galvanized nut bolts is used for assembly.16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.17. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.18. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 8 | Providing and fixing \\"Seated Chest Press\\" in a pair with the below specifications:1. Dimensions (LxWxH): 1800 x 700 x 2000 mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make. 3. Seat Main frame of NB 50mm (G.I.) \\"C\\" Class Pipe.4. Handle frame of NB 32mm and NB 25mm (G.I.) \\"C\\" Class Pipe.('NB' stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimetres).5. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.6. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing.8. Handle bars are provided with high-end quality rubber grips. 9. Baseplate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and coloured.10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, coloured, UV resistant and environmentally friendly. 11. Maintenance-free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.12. The equipment must be fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is to be fixed on the ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with a baseplate cover.15. High tensile steel with galvanized nut bolts is used for assembly.16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.17. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.18. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 9 | Providing and fixing an \\"Arm Wheel\\" in a pair with the below specifications:1. Dimensions (LxWxH): 850 x 800 x 1800 mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make. 3. Wheel frame of NB 32mm with connecting spokes of NB 25mm, Pipe connecting main pilar with wheel frame of NB 50mm. All pipes must be (G.I.) \\"C\\" Class Pipes ('NB' stands for Nominal Bore Size, i.e., Internal Diameter of pipe in millimetres). 4. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.5. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs.6. Zinc primer paint is applied at all the welding points prior to finishing.7. Baseplate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and coloured.8. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured.9. The equipment is to be fixed on the ground by providing and laying Cement Concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J shaped welded bolts of 18mm thickness.10. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with a baseplate cover.11. High tensile steel with galvanized nut bolts is used for assembly.12. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.13. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.14. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 10 | Providing and fixing an \\"Elliptical exerciser\\" with the below specifications: 1. Dimensions (LxWxH): 1200 x 550 x 1600 mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make.3. Main frame of NB 80mm (G.I.) \\"C\\" Class Pipe.4. Handle frame of N8 32mm and NB 25mm (G.I.) \\"C\\" Class Pipe. ('NB' stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimetres).5. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints. 6. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Handle bars are provided with high-end quality rubber grips. 9. Baseplate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and coloured. 10. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured.11. The equipment is to be fixed on the ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.12. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with a baseplate cover.13. High tensile steel with galvanized nut bolts is used for assembly.14. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 15. Self-Explanatory stainless-steel label fixed on equipment for ease of use.16. Foothold made of Co-Polymer Plastic with rounded edges to prevent impact and injury, including maintenance cost for 2 years.17. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 11 | Double cross walker: Providing, designing and fixing double cross walker of size 1600x600x1600 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Noble or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing handles bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent by impact or injury seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm colourful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer- in- charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by G.I./ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength of M-25 and J shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material shape of equipmnt colour on metal seat and base and plate and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately). |
| 12 | Providing and fixing \\"Triple Twister\\" with the specifications below:1. Dimensions (LxWxH): 1300 x 1300 x 1650 mm. 2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make.3. Handle Main frame of NB 32mm (G.I.) \\"C\\" Class Pipe.4. Handle frame spokes of NB 25mm (G.I.) \\"C\\" Class Pipe. ('NB' stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimetres).5. Foothold plate made of MS Sheet Metal of 3mm thickness.6. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.7. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs.8. Zinc primer paint is applied at all the welding points prior to finishing.9. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured.10. The equipment is to be fixed on the ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.11. Once the concrete is set, the equipment is fixed on to it.12. High tensile steel with galvanized nut bolts is used for assembly.13. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 14. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.15. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 13 | Providing and fixing a \\"Rowing Machine\\" with the below specifications:1. Dimensions (LxWxH): 1250 x 800 x 1150 mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make.3. Main frame of NB 65mm (G.I.) \\"C\\" Class Pipe. 4. Handle support frame of NB 25mm (G.I.) \\"C\\" Class Pipe. ('NB' stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimetres).5. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.6. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Baseplate cover made of virgin LLDPE plastic by rotational molding of 4.00mm thickness, UV resistant and coloured.9. Foothold made of NB 50mm (G.I.) \\"C\\" Class Pipe.10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, coloured, UV resistant and environmentally friendly.11. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured.12. The equipment must be fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is to be fixed on the ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with a baseplate cover.15. High tensile steel with galvanized nut bolts is used for assembly.16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 17. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.18. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 14 | Providing and fixing a \\"Weight Assisted Shoulder Press\\" with the below specifications: Weight Assisted Shoulder Press of minimum size 1350x1600x1150mm fabricated with main post of G.I. ‘C’ Class of NB 65 mm and other support and handle frames of NB 50 mm G.I. ‘ C’ Class pipes only. Joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint shall be applied at all welding points prior to finishing. Handle support frame made of GI 'C' Class Pipe of NB 25 mm. Handle bars shall be provided with high quality rubber grip. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. Machine to have weight plate adjustment arrangement made of 304 grade stainless steel and it must be designed to prevent theft of weight plates. Plates have to be fully locked in the machine but movable for the adjustment. Weight Change system should allow user to freely change resistance by changing individual weight plate of each arm. Weight on each arm should be adjustable between 0-15kgs. Seats to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of 4.00 mm, colourful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self-lubricated of SKF / equivalent make as approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps or sealed in for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-20 and J shape welded bolt made of 18mm galvanized rod and covered with base plate cover after the installation complete. Equipment made to GS Mark, EN 16630, DIN 79000, ASTM F 3101-15 and ISO 14001 International standard for outdoor fitness equipment. Self-Explanatory stainless steel label shall be fixed on equipment for ease of use. Pipe and sheet components should be cut by atleast 2 KW laser machine having CNC made components welded using robot with atleast 2 metre welding range. Cost of earth work and concrete in foundation to be paid for separately.This rate is inclusive of maintenance cost for 2 years as well as GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 15 | Providing and fixing a \\"Weight Assisted Chest Press\\" with the below specifications: Weight Assisted Chest Press of minimum size 1100x1500x1300mm fabricated with main post of G.I. ‘ C’ Class of NB 65 mm and other support and handle frames of NB 50 mm G.I. ‘ C’ Class pipes only. Joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint shall be applied at all welding points prior to finishing. Handle support frame made of GI 'C' Class Pipe of NB 25 mm. Handle bars shall be provided with high quality rubber grip. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. Machine to have weight plate adjustment arrangement made of 304 grade stainless steel and it must be designed to prevent theft of weight plates. Plates have to be fully locked in the machine but movable for the adjustment. Weight Change system should allow user to freely change resistance by changing individual weight plate of each arm. Weight on each arm should be adjustable between 0-15kgs. Seats to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of 4.00 mm, colourful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self-lubricated of SKF / equivalent make as approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps or sealed in for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-20 and J shape welded bolt made of 18mm galvanized rod and covered with base plate cover after the installation complete. Equipment made to GS Mark, EN 16630, DIN 79000, ASTM F 3101-15 and ISO 14001 International standard for outdoor fitness equipment. Self-Explanatory stainless steel label shall be fixed on equipment for ease of use. Pipe and sheet components should be cut by atleast 2 KW laser machine having CNC made components welded using robot with atleast 2 metre welding range. Cost of earth work and concrete in foundation to be paid for separately. This rate is inclusive of maintenance cost for 2 years as well as GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 16 | Providing and fixing a \\"Weight Assisted Lat Pull Down\\" with the below specifications: Providing, designing and fixing of Weight Assisted Lat Pull Down of minimum size 1200x1300x1650mm fabricated with main post of G.I. ‘ C’ Class of NB 65 mm and other support and handle frames of NB 50 mm G.I. ‘ C’ Class pipes only. Joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint shall be applied at all welding points prior to finishing. Handle support frame made of GI 'C' Class Pipe of NB 25 mm. Handle bars shall be provided with high quality rubber grip. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. Machine to have weight plate adjustment arrangement made of 304 grade stainless steel and it must be designed to prevent theft of weight plates. Plates have to be fully locked in the machine but movable for the adjustment. Weight Change system should allow user to freely change resistance by changing individual weight plate of each arm. Weight on each arm should be adjustable between0-15kgs. Seats to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of 4.00 mm, colourful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self-lubricated of SKF / equivalent make as approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps or sealed in for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-20 and J shape welded bolt made of 18mm galvanized rod and covered with base plate cover after the installation complete. Equipment made to GS Mark, EN 16630, DIN 79000, ASTM F 3101-15 and ISO 14001 International standard for outdoor fitness equipment. Self-Explanatory stainless steel label shall be fixed on equipment for ease of use. Pipe and sheet components should be cut by atleast 2 KW laser machine having CNC made components welded using robot with atleast 2 metre welding range. Cost of earth work and concrete in foundation to be paid for separately.This rate is inclusive of maintenance cost for 2 years as well as GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 17 | Providing and fixing a \\"Weight Assisted Rowing Machine\\" with the below specifications: Weight Assisted Rowing Machine of minimum size 1500x1450x1650mm fabricated with main post of G.I. ‘ C’ Class of NB 65 mm and othersupport and handle frames of NB 50 mm G.I. ‘ C’ Class pipes only. Joints scalloped as necessary and dressed off removing sharp edges andburrs. Zinc primer paint shall be applied at all welding points prior to finishing. Handle support frame made of GI 'C' Class Pipe of NB 25 mm. Handle bars shall be provided with high quality rubber grip. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. Machine to have weight plate adjustment arrangement made of 304 grade stainless steel and it must be designed to prevent theft of weight plates. Plates have to be fully locked in the machine but movable for the adjustment. Weight Change system should allow user to freely change resistance by changing individual weight plate of each arm. Weight on each arm should be adjustable between 0-15kgs. Chest support to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of 4.00 mm, colourful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self-lubricated of SKF / equivalent make as approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps or sealed in for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-20 and J shape welded bolt made of 18mm galvanized rod and covered with base plate cover after the installation complete. Equipment made to GS Mark, EN 16630, DIN 79000, ASTM F 3101-15 and ISO 14001 International standard for outdoor fitness equipment. Self-Explanatory stainless steel label shall be fixed on equipment for ease of use. Pipe and sheet components should be cut by atleast 2 KW laser machine having CNC made components welded using robot with atleast 2 metre welding range. Cost of earth work and concrete in foundation to be paid for separately.This rate is inclusive of maintenance cost for 2 years as well as GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 18 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates efc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 19 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 4 mm thick ACP sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S/S.S plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). (a) Overhead informatory signage |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 21 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. a)Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 22 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 23 | Deduct for taking out old gym open equipment ; Air walker |
| 24 | Deduct for taking out old gym open equipment ; Sit up station |
| 25 | Deduct for taking out old gym open equipment ; Air swing |
| 26 | Deduct for taking out old gym open equipment ; Horse rider station |
| 27 | Deduct for taking out old gym open equipment ; Leg Press |
| 28 | Deduct for taking out old gym open equipment ; Pull Chair |
| 29 | Deduct for taking out old gym open equipment ; Seated chest press |
| 30 | Deduct for taking out old gym open equipment ; Arm Wheel |
| 31 | Deduct for taking out old gym open equipment ; Elliptical Exerciser |
| 32 | Deduct for taking out old gym open equipment ; Double cross walker |
| 33 | Deduct for taking out old gym open equipment ; Twister |
| 34 | Deduct for taking out old gym open equipment ; Rowing machine |
| 35 | Deduct for taking out old gym open equipment ; Weight Assisted Shoulder Press |
| 36 | Deduct for taking out old gym open equipment ; Weight Assisted Chest Press |
| 37 | Deduct for taking out old gym open equipment ; Weight Assisted Lat Pull Down |
| 38 | Deduct for taking out old gym open equipment ; Weight Assisted Rowing Machine |
| 39 | Schedule – B |
| 40 | Maintenance of open Gym set (16 gym Equipment in One set ) |
| 41 | Free maintenance for first two year after installation of open gym |
| 42 | For 3rd year |
| 43 | For 4th year |
| 44 | For 5th year Terms & Conditions : 1 The agency shall regularly inspect and upkeep the equipment in proper working condition as required.2 Any complaint, as and when reported, shall be attended within three days during the five years maintenance period. Failing which, a penalty of Rs. 2000/- per day shall be imposed and recovered from the agency.3 In case the equipment or its parts are stolen during the execution to negligence in maintenance by the agency, the agency shall replace the stolen equipment/parts at its own cost. No payment shall be made for such replacement.4 Buy back rates are applicable against exchange of same quantity of new open gym equipment's only. 5 Buy back rates are inclusive of dismantling charge and removing the dismantled old open gym equipment's from the site. (Suggested to visit the site, Damaged/Missing parts equipment's will also to be taken in buy back) 6 All the pipes should be G.I. ‘C’ class, ISI marked. 7 The maintenance of equipment for initial two year after actual date of completion of the work shall be carried out by the agency at his own cost. The next three years maintenance period as per the schedule above shall be reckoned after expiry of first two year of free maintenance period.8 An amount equal to 50% cost of replaced equipment against item No-1 to 16 in schedule-A shall be withheld from each R/A bill, in addition to the security deposit, towards warranty. This withheld amount shall be released proportionately, year-wise, after successful completion of each year of the 05 years maintenance period (including both free and paid maintenance periods) as mentioned in the table provided below:- First year 10% Second year 10% Third year 10% Fourth year 10% Fifth year 10% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender