Tender For Repair/ Maintenance Of Joinery, Att Treatment And Allied Works In Smq And Mes Colony In Domestic Area At Af Stn Bhuj
Tender Value
35 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
15 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Joinery, Att Treatment And Allied Works In Smq And Mes Colony In Domestic Area At Af Stn Bhuj
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames exc 1.5 sqm and n exc 4 sqm each with shutters (without taking off shutter from the frame) and removing to or from sore |
| 2 | Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) and removing to or from store |
| 3 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and removing to or from store. |
| 4 | Taking down shutters of any description n.exc 1 Sqm each and removing to or from store. |
| 5 | Taking down shutters of any description exc 2 sqm each and removing to or from store. |
| 6 | Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete. |
| 7 | Refixing of shutter of any description n exc 1 sqm in same opening complete. |
| 8 | M&L PCC 1:2:4 type B0 (12.5 mm graded stone aggregates) as in bed blocks for hold fasts including necessary form works. |
| 9 | S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as directed. |
| 10 | S&F in repair 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a). including fixing of stainless steel wire cloth 0.36 mm nominal of wire and average width of aperture 1.400mm and fixed with stainless steel wire staples as in wooden wiremesh shutter complete all as specified and directed. |
| 11 | Providing and fixiing solid PVC double door frame of size 50mm x 95 mm with a wall thickness of 5 mm, made by jointing 3 Nos, hear bent PVC sheet 'C' channel of 5 mm foam sheet of sizes 35mm x 30mm x 25mm and 40mm x 35 mm x 40mm & 25 mm x 30mm x 35mm using solvent cement. The two side 'C' channel shall be reinforced with 19mm x 19mm MS square tusbe of 19mm gauge. All the three 'C' channel shall be fixed to flat baseof 5 mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and jointed by inserting 4 Nos. 150mm long brackets of 15 mm x 15mm MS suare tusbe inside the 19mm x 19mm square tubes. The door frame shall be fixed to the wall using 65/100 mm long MS screws throguh the frameby using PVC fasteners. A minimum of 8 Nos of screws to be sprovide for each vertical member & minimum 4 nos for horizontal member etc. |
| 12 | All as per Item No 11 above but single door frame of size 50mm x 47mm -ditto- all as directed by the EIC. |
| 13 | Providing and fixing 35mm thick factory made moulded door shutter consisting of solid core single leaf flush door of 30mm thichness, lipped with 15mm (5mm x 30 thick x 30mm width on one stiles and top reails & bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2 raised panel design in different plain and 2mm plain coloured PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc., complete as per direction of Engr-in-Charge. |
| 14 | Providing & fixing 30mm thick factory made wiremesh solid PVC door shutter consisting of frame made out of 19 gauge thickness & size of 19 mm x 19mm of style and 15mm x 15mm for top, lock and bottom rails. And in addition one veritical member throughout in between styies. MS frame shall be covered with 5mm thick heat moulded PVC 'C' channel of appropriate sixe 15mm wide PVC sheet beading is to be stuck internally in the back side of stiles and ralls of door with solvent cment adhesive. So that the wiremesh can be fixed properly. The wiremesh solid shutter have PVC sheet to match the sutter of PVC moulded shutter etc.including fixing of stainless steel wire cloth 0.36 mm nominal of wire and average width of aperture 1.400mm and fixed with stainless steel wire staples as in wooden wiremesh shutter complete all as specified and directed. |
| 15 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 16 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 17 | M&L for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle, 75mm long tower bolt and anodised aluminum fittings such as stay, 75mm long Butt hinges glazing with 5 mm thick tinted sheet glass fixed with Solar control film 25 micron reflective type (gareware sun control or equivalent) and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm apertur except fixed glazing (FG) all as specified and directed.(Tint of glass shall be approved by GE) Note :-i) Aluminium grill fixed under above item shall be measured and paid separately.ii) Size of Aluminium Section for frame - 100x45x1.2mm.iii) Size of Aluminium Section for shutter - 85x45x1.2mmiii) Size of Aluminium wiremesh Shutter - 40x18x1.2mm |
| 18 | S&F anodized aluminium ventilator fixed type with frames aluminium section size 63X38X1.20mm thick including fly proofing ventilator fixing with standard rubber gasket locking arrangements aluminium beadings & joining cleats, suitable butt hinges, handle and tower bolts for fixing complete all as specified and 5.5 mm thick tinted glass with Solar control film 25 micron reflective type complete all as specified and directed. |
| 19 | S&F powder coated anodized aluminium grill (diamond shape of approx size 100x100mm) made out of aluminium 'Y' section as approved by Engr-in-Charge for window/ ventilators etc complete all as specified and directed. |
| 20 | S&F aluminium fully glazed door with shutter and frame with one or more rebates made out of anodised aluminium sections, shutters fixed with floor spring hinge (ISI marked) including jointing cleats for fixing etc complete all as specified with panel of 6 mm thick tinted glass (tint of glass as approved by GE), clips, rubber packing, anodised aluminium snap beading, screws and aluminium fittings all as specified and directed. |
| 21 | S&F aluminium anodised approved make door shutter in single or double leaf with frames size 83 x 38 x 1.5 mm thick including 5.5 mm thick tinted, frosted , glass in half portion and 12mm thick prelaminated particle board exterior grade, one side with decorative choice and other side balancing (both side white laminated) , standard rubber gasket, powder coated aluminium beadings, disc type handles two Nos, , double action floor spring for each shutters and one mortice lock and joining cleat etc complete all as specified and directed.Note:- Floor door spring & mortice lock shall be measured and paid separately under respective items. |
| 22 | S&F in repair Glass door 12mm Th clear tinted toughned glass incl diamond polish complete with six holes and two patch cut out incl frosting of glass all as per direction of EIC through CNC machine incl ISI marked floor door spring for each shutter incl top patch bottom patch and 30 cm long stainless steel handle set and central stainless steel lock all as specified and directed by EIC |
| 23 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 24 | S&f Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. |
| 25 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame all as specified |
| 26 | M&L anodised aluminium snap grid size of grid 605mm x605mm frame work made out of 0.5mm thick GI tee 32x24mm for main, 25x44mm for cross tee and 20x20mm angle fixed on wall , powder coated finish on exposed faces of tee and angle , hung from ceiling using 2mm thick GI suspension wires spaced of 1200mm on main runners for false ceiling complete all as specified and directed by EIC. all as specified |
| 27 | M&L for gypsum ceiling board for ceiling prepainted , matt finish, 600x600x12mm in size with preparation of approved brand/ make, laid over, grid work ro fixed with nails to any type of frame work or with staples on snap grid incl making niches for fan/light on ceiling purposes. |
| 28 | M & L PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification. |
| 29 | M&L for providing 12mm thick Gyp boards in ceilings fixed to ceiling sections with screws @ 300mm centre to centre and making good joints Gypsum binder including preparing the surfaces of ceiling boards and applying 2 coats of acrylic oil emulsion distemper with GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofits at approxly 900mm centre to centre with GI cleats, GI suspenders and steel expansion fasteners with and including ceiling section of 0.55mm thick having kurled web of 50 mm and flange of 26 mm each side with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre all as specified as directed. |
| 30 | M&L for false ceiling corners with designed angular shape of size 100x100mm with POP fixed on 6mm thick fibre board with 20x20mm, 0.55mm thick galvanised sections fixed at intervals not more than 750mm complete al as specified and directed by Engr-in-Charge. |
| 31 | S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 |
| 32 | S & F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed. |
| 33 | S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm. |
| 34 | S&F 150mm long aluminum anodised barrel tower bolts of extruded section as specified. |
| 35 | S&F Aluminium handles, cast type, anodized 150 mm size comp ISI Marked |
| 36 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long. |
| 37 | S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 38 | S&F mild steel, 300 mm long ordinary helical door spring incl roller and roller plate complete |
| 39 | S&F in repair mild steel, 300 mm long ordinary helical door spring incl roller and roller plate incl welding with frrame or chowkhats complete all as specified and as directed. |
| 40 | Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames/Aluminium frame glazed with oil putty or fixed with rubber beads complete at any height. |
| 41 | S&F 4 mm thick sheet glass, ordinary quality, and glazing with oil putty in square n exc 0.50 sqm in each pane as in Steel windows and at any height complete all as specified and as directed. |
| 42 | All as per item No 41 above but glass is frosted , grounded or obscured on one side as in steel ventilators complete all as specified and as directed. |
| 43 | S&F for 5.5mm thick tinted glass fixed with solar control film 25 micro reflective type as approved by GE, fixed to existing aluminium door/ windows including provn of rubber beading, cleats, clips and locking arrangements exc. 0.50 sqm each pane complete all as specified and as directed. |
| 44 | S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih stainless steel wire staples as in Steel windows and steel ventilators including removing the rusted wire mesh fixed with nuts and bolts and fixing the wire mesh cloth at any height complete all as specified and as directed. |
| 45 | S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih stainless steel wire staples as in Aluminium windows/ventilators including removing the rusted wire mesh and fixing the wire mesh cloth at any height complete all as specified and as directed. |
| 46 | S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves all as specified and directed |
| 47 | S&F Hasp and staple, mild steel, safety type, stove enameled black, including bolt to hinge plate and fixed with screws of 125mm size |
| 48 | M & L Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer. |
| 49 | M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete. |
| 50 | M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of scaled paint and applying one coats of synthetic enamel paint complete all as specified and as directed. |
| 51 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 52 | S & F in repairs Double action floor door spring hydraulically regulated made up of minimum 1.25 mm th aluminium alloy sheet foudation box main body with stainless steel cover governing pivot made up of brass other parts made up mild steel heavy duty and fixed complete all as specified. |
| 53 | S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg etc complete all as specified & directed. |
| 54 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises |
| 55 | M & L for glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over plaster in CM 1:4 all as specified and directed. |
| 56 | S&F MS Peg set of six power coated as approved by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 57 | S&F MS Peg set of six power coated as approved by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender