Tender For Repair Of Link Road Connection Nh-503 To Bagrot Tillu Km 0/0 To 2/200 And Proposed Zoological Park, Bankandi Tehsil Dehra Distt. Kangra (H.P). (Sh:- Formation Cutting, R/Walls, Cross Drainage, providing and laying Gsb, Wmm, Bituminous Macd
Tender Value
2.64 Crore
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
5.29 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Link Road Connection Nh-503 To Bagrot Tillu Km 0/0 To 2/200 And Proposed Zoological Park, Bankandi Tehsil Dehra Distt. Kangra (H.P). (Sh:- Formation Cutting, R/Walls, Cross Drainage, providing and laying Gsb, Wmm, Bituminous Macdam & Bc, Ccp, V-Shape Drain, Parapets And W-Metal Crash Barrier & Road Side Funiture In Km 0/0 To 2/200).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in hilly area in all heights and depths and in all kind of soil by manual/ mechanical means including saturated soil comprising of ordinary soil, soft rock, hard rock, chiseling, wedging out of rock (where blasting is prohibited) and their intermediate classification of soil, setting out true to the required lines, grades, cutting and trimming of side slopes and level as shown in the drawing and as directed by the engineer-in-charge at site according to the MORD technical specification section 300 and 1600 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of road and transportation of useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load or animal transport or mechanical means along with its leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour if required. All useful material such as stones shungle, aggregate and slates etcetra shall be sorted out and stacked in proper stack. Recovery of useful stone to the tune of 79.32 cum (seven nine decimal three two cubic metres) quantity at the rate of 300/-(Rupees Three hundred) per cubic metre shall be effected from the contractor's running bills on pro-rata basis as per actual quantity executed. Any loss to the public, private / property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be compensated by him in all cases including carriage of matereials within all leads , lifts and other incidentals The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 2 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with in all lifts and leads, transporting to site, spreading, grading by mechanical means to required slope and compacted with three wheel 80-100 (eighty - one hundred) kN static roller to meet requirement of Table 300.2 complete as per MORD technical Specification section 400 and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 3 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement including setting out, true to the lines, grades, width and side slopes in accordance with drawing including spreading the embankment material with motor grader in successive layer of in layer 200mm (two hundred millimetre) uniforms thickness and compacting with vibratory roller 8-10 ( eight to ten) tonne static weight to meet requirement of Tables 300.1 and 300.2 as per MORD Technical Specification section 300 & 1600 and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 4 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drain and Parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- In – Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides, bottom and back filling in trenches with excavated suitable approved material to the original surface in layer not executing 150 mm (one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth any quantam of water including cleaning of slush which may arise out during dewatering complete as per direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 5 | Providing and laying mechanically mixed and vibrated plain/cement concrete in open foundation for all type of structure complete of plain cement concrete nominal mix 1:4:8, {(one cement isto four sand isto eight graded crushed stone aggregate 40 mm (Forty millimetre nominal size)} on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work as per drawings and M.O.R.D. technical specification section 800,900,1200 & 1600 as per the direction of the Engineer-in-charge, including carriage of materials within all leads lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government, but excluding GST. |
| 6 | Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete in road structure as per drawing and M.O.R.D. technical specifications section 1200 and 1600 and as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government, but excluding GST. |
| 7 | Providing and laying 100mm (one Hundred millimetre) dia PVC pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Return walls and retaining/breast walls extended through the full width of the structure with slope I(V):20(H)(One vertical : Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section 700 and 1200 and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 8 | Loosening of the ground upto a level of 300mm (Three hundred millimetre) below sub-grade level watered, graded with motor grader and compacting by rolling with Road rollar 8-10kN (eight to Ten) static weight at OMC to achieve the required density as per Tables 300.1 and 300.2 of MORD Technical Specification section 300 and as per direction and the entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government, but excluding GST. |
| 9 | Construction of granular sub-base by providing well graded materials, as per table 401spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three Wheel 80-100 (Eighty-hundred) kN static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I Material, as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 10 | Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN (eighty to one hundred kilonewton) weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and M.O.R.D.Technical Specification section 4060 and as per direction of Engineer-in-charger including carriage of materials within all leads lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government, but excluding GST. |
| 11 | Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface with hydroulic brooms and spraying primer with bitumen emulsion pressure distributor at the rate of 0.85 kg (zero point eight five kilogram) per square meter as per MORD Technical specification section 500 as per the entire satisfaction and directions of Engineer – in- Charge including carriage of materials within all leads,lifts and other incidentals . The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding GST. |
| 12 | Providing and applying tack coat on the prepared granular surface treated with primer and cleaned with hydraulic broom and spraying tack coat @ 0.275 Kg (Zero decimal two seven five kilogram) per Square metre as per MORD technical specification section 500, and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana toll tax and other taxes imposed by the Government but excluding GST. |
| 13 | Providing and laying 50mm (Fifty millimetres) compacted thick bituminous macadam with 100-120 (One hundred -One hundred twenty) tonne per hour hot mix plant producing an average output of 75 tonnes (seventy five tonne) per hour using crushed aggregates of specified grading as per table 500.4 premixed with bituminous binder VG-30 (Viscosity Grade-Thirty) at the rate of 3.3% (Three decimal three percent) of mix weight, transported to site, laid over a previousioly prepared surface with paver finisher to the required grade, level and alignment and rolled as per MORD technical specificaton section 500 including carriage of material within all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding GST. |
| 14 | Providing and laying 30mm (thirty millimetre) compacted thickness bituminous concrete with 100-120 (one hundred to one hundred twenty) TPH hot mix batch type plant with electronic control grading-II using crushed aggregate 13.2 mm (thirteen decimal two millimetre) nominal size of specified grading premixed with bituminous binder VG-30 (Viscosity grade-Thirty) at the rate of 5.5% (five point five percent of mix weight or as per design mix, using cement as filler with quantity not less than 2% (two percent) by weight of total aggregate or as per design mix transported to site, laid with sensor paver finisher hydraulic with sensor conrol to the required grade, level and alignment, over a previsiouly prepared surface and rolling complete with sommth three wheel roller 8-10 (eight to ten ) tonne capacity for initial break down rollng and vibratory roller 8-10 (eight to ten) tonne capacity or pneumatic tyre roller of 12-15 (twelve to fifteen) tonne with tyre pressure of atleast 0.56 MPa (Zero decimal five six) for intermediate rolling and finish rolling with 6-8 (six to eighty) tonne smooth wheeled tandom roller to achieve the desire compaction as per MoRTH technical specification section 500 complete in all respect or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government, but excluding GST. |
| 15 | Construction of un-reinforced, dowel jointed plain cement concrete pavement, thickness as per design, over a prepared sub base, with approve grade M-35 (M-Thirty five), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a bathing and mixing plant as per approved mix design, transported to site laid with a fixed from paver, spread, compacted and finished in a continuous operation including provision of contraction expansion, construction and longitudinal joints, joint filler, sepration membrance, sealant primer, joints sealant, debonding strips, primer, dowel bars, tie rod, admixtures as approved, curing compand, finishing to lines and grades as per drawing and MORD Technical Specification section 800 complete in all respect and as per the direction of Engineer-in-Charge, including carraige of material with in all leads, lift and other incidential. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government, but excluding GST. |
| 16 | Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in open foundation for all type of structure complete using plain cement concrete nominal mix 1: 3: 6 ( One cement isto three sand isto six graded crushed/broken stone aggregate 20mm (Twenty millimetre) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arrise at the time of laying concrete in drain etcetra complete for all heights/ depths including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 17 | Reinforced cement concrete mechanicallly mixedand vibrated, M-15 (M-fifteen) grade ordinary Kilometer stone (Precast) of standard design as per IRC : 8 (IRC - eight) Fixing in position including painting and printing etcetra as per drawing and M.O.R.D. technical specification section 1700 and per direction of Engineer-in-Charge including entire carriage of materials within all leads lifts and other incidentals The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government, but excluding GST. |
| 18 | Reinforced cement concrete M-15 (M-fifteen) grade 200m (two hundred metre) Stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 19 | Providing and erecting 900mm (nine hundred millimetres) equilateral triangle cautionary / mandatory / informatory sign boards of retro reflectorised sign as per IRC: 67 made of encapsulated lens type reflective sheeting, fixed over aluminium sheeting 1.5 mm (One point five)millimetre thick (The aluminum sheeting shall be provided with duly painted 25x25x3mm (twenty five in to twenty five in to three millimeters) angle iron frame along its periphery), supported on a mild steel angle iron posts 75x75x6mm (seventy five into seventy five into six millimeters) fixed to the ground by means of of properly designed foundation in concrete block of grade M-15 (M-fifteen) nominal mix, of size 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeters) whereas the cement concrete block will be 600mm (six hundred millimeters) below the ground level, complete as per MORD technical specification section 1700 and as per the directions of the Engineer-in-charge inclusive carriage of materials within all leads and lifts and other incidental. The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 20 | Providing and erecting 600mm (six hundred millimetres) circular cautionary / mandatory / informatory sign boards of retro reflectorised sign as per IRC: 67 made of encapsulated lens type reflective sheeting, fixed over aluminium sheeting 1.5 mm (One point five)millimetre thick (The aluminum sheeting shall be provided with duly painted 25x25x3mm (twenty five in to twenty five in to three millimeters) angle iron frame along its periphery), supported on a mild steel angle iron posts 75x75x6mm (seventy five into seventy five into six millimeters) fixed to the ground by means of of properly designed foundation in concrete block of grade M-15 (M-fifteen) nominal mix, of size 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeters) whereas the cement concrete block will be 600mm (six hundred millimeters) below the ground level, complete as per MORD technical specification section 1700 and as per the directions of the Engineer-in-charge inclusive carriage of materials within all leads and lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 21 | Providing and erecting 600mmx450mm (six hundred millimetres into four hundred fifty millimetres ) rectangular cautionary /mandatory /informatory sign boards of retro reflectorised sign as per IRC: 67 made of encapsulated lens type reflective sheeting, fixed over aluminium sheeting 1.5 mm (One point five)millimetre thick (The aluminum sheeting shall be provided with duly painted 25x25x3mm (twenty five in to twenty five in to three millimeters) angle iron frame along its periphery), supported on a mild steel angle iron posts 75x75x6mm (seventy five into seventy five into six millimeters) fixed to the ground by means of of properly designed foundation in concrete block of grade M-15 (M-fifteen) nominal mix, of size 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeters) whereas the cement concrete block will be 600mm (six hundred millimeters) below the ground level, complete as per MORD technical specification section 1700 and as per the directions of the Engineer-in-charge inclusive carriage of materials within all leads and lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 22 | Providing and erecting 600mmx600mm (six hundred millimetres into six hundred millimetres) square board cautionary/mandatory/informatory sign boards of retro reflectorised sign as per IRC: 67 made of encapsulated lens type reflective sheeting, fixed over aluminium sheeting 1.5 mm (One point five)millimetre thick (The aluminum sheeting shall be provided with duly painted 25x25x3mm (twenty five in to twenty five in to three millimeters) angle iron frame along its periphery), supported on a mild steel angle iron posts 75x75x6mm (seventy five into seventy five into six millimeters) fixed to the ground by means of of properly designed foundation in concrete block of grade M-15 (M-fifteen) nominal mix, of size 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeters) whereas the cement concrete block will be 600mm (six hundred millimeters) below the ground level, complete as per MORD technical specification section 1700 and as per the directions of the Engineer-in-charge inclusive carriage of materials within all leads and lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 23 | Providing and erecting Direction and Place Identification signs with size 900x600mm (Nine hundred into six hundred milimetre) retro-reflectorised sign as per IRC:67 (IRC-Sixty seven) made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2mm (two millimetre) thick with area not exceeding 0.9 sqm (zero point nine square metre) supported on mild steel angle iron post 75x75x6mm (seventy five into seventy five into six millimetre), 2 (two) Nos firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade cement concrete 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimetres), 600mm (six hundred millimetre) below ground level as per approved drawing and M.O.R.D. Tehnical Specification section 1700 including carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government, but excluding GST. |
| 24 | Providing and erecting Direction and Place Identification signs with size 1200x900mm (tweleve hundred into nine hundred milimetre) retro-reflectorised sign as per IRC:67 (IRC-sixty seven) made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2mm (two millimetre) thick with area exceeding 0.9 sqm (zero point nine square metre) supported on mild steel angle iron post 75x75x6mm (seventy five into seventy five into six millimetre) 2 (two) Nos firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade cement concrete 450x450x600 mm (four hundred fifty into four hundred fifty into six hundred millimetres), 600 mm (six hundred millimetre) below ground level as per approved drawing and M.O.R.D. Tehnical Specification Section 1700 including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government, but excluding GST. |
| 25 | Providing and Laying of Hot applied thermoplastic compound road marking paint 2.5mm (two decimal five millimetre) thick with refletorising glass beads at the rate 250 gram (two hundred fifty) gram per square metre area, thickness of 2.5mm (two decimal five millimetre) is exclusive of surface applied glass beads as per specificaiton and with strips of 0.10 (Zero decimal one) metre width in centre lines or edge lines of the road as per the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 26 | Providing and Fixing pavement marker (Cat eyes) made out of ABS 3 M (three) plastic of size 128x110x29.5 mm (one hundred twenty eight into one hundred ten into twenty nine decimal five millimetres) without nail having 50mm ( fifty millimetres) stem of ABS. The pavement marker shall be installed with epoxy ABS as per specification including carriage of materials and equipment with all mode of transportation and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 27 | Providing and fixing of road studs 100x100mm (one hundered into one hundered milimeter) die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lens reflectors, insatlled in concrete or asphalti surface by drilling holes 30 mm (thirty millimeter) upto depth 600 mm (six hundered millimeter) and bedded in a suitable bituminious grout or epoxy mortar, all as per BS:873( Part4) 1973 as per drawing and MORD technical specification section 1700 including carriage of materials and equipment with all mode of transportation and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 28 | Provision of 8 (eight) numbers rumble strips covered with premix bituminous concrete, 15-20mm (fifteen to twenty milimetre)high at center, 250mm (two hundred fifty milimetre) wide placed at 1m (one metre) centre to centre at approved locations to control speed), marked with white strips of road making paint. complete in all respect including carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government, but excluding GST. |
| 29 | Providing and laying mechanically mixed and vibrated plain cement concrete in sub structure grade M-15 (M-fifteen) design mix with cement contents not less than 275kg (two hundred seventy five kilogram per cubic metre) with 40mm (forty millimetre) nominal size graded stone aggregate on ground or under water including curing complete including pumping or bailing out water de-watering removal of slush as required at site, which may arises at the time of laying concrete complete for all heights/depths including cost of form work in parapets and toe wall etcetra as per drawing and MORD technical specification section 800, 900 and 1200 including carriage of materials within all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding GST. |
| 30 | Providing and errecting a \\" W\\" metal beam crash barrier comprising of 3mm (three millimetre) thick corrugated sheet metal beam rail, 70cm (seventy centimetre) above road/ Ground level fixed on I.S.M.C. series channel vertical post 150x75x5 mm (one hundred fifty into seventy five into five millimetre) spaced 2 m (two metre) centre to centre 1.8 m (one point eight metre) high, 1.1 m (one point one metre) below ground/ road level, all steel part and fitments to be galvanised by hot dip process. All fitting to conforms to I.S 1367 and I.S. 1364 metal beam rail to be fixed on the vertical post with spacer of channel section 150x75x5mm (one hundred fifty into seventy five into five millimetre), 330 mm (three hundred thirty millimetre) long complete as per MORTH technical specification section 800 and as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 31 | Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in open foundation for all type of structure complete using nominal mix 1: 3: 6 (One cement isto three sand isto six graded crushed/broken stone aggregate 40mm (Forty millimetre) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 32 | Providing and laying mechanically mixed and vibrated reinforced cement concrete in sub-structure using grade M-20 (M-Twenty) designed mix with cement contents not less than 350kg (three hundred fifty kilogram) per cubic metre with 20mm (Twenty milimetres) nominal size graded crushed stone aggregate as per drawings and M.O.R.D. technical section 800, 900 and 1200 including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in bed block and dirt wall etcetra and curing complete including carriage of materials with in all kinds of leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 33 | Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in sub structure using concrete grade M-20 (M-Twenty) design mix with cement contents not less than 330 Kgs (Three hundred thirty kilograms) per cubic metre with 40mm (Forty milimetres) nominal size graded crushed stone aggregate as per drawings and M.O.R.D. technical specifications section 800, 900 & 1200 including the cost of form work and curing complete in flooring etcetra including carriage of materials within all kinds of leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 34 | Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure as per drawing and M.O.R.D. technical specification section 800, 900 and 1400 using Reinforced Cement Concrete grade M-25 (M-Twenty five) designed mix with cement contents not less than 400 Kgs(Four hundred kilogram) per cubic metre with 20mm(Twenty milimetres) nominal size graded crushed stone aggregate and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in deck slab, etcetera including carriage of material within all leads, lifts and other incidental, as per the directions of the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 35 | Supplying fitting and placing HYSD bar reinforcement (Fe 500 D) of Tata/Sail in sub structure complete as per drawing and M.O.R.D. technical specifications section 1000 and 1200 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire upto any height / depths as per the directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 36 | Supplying fitting and placing HYSD bar reinforcement (Fe-500 D) of Tata/Sail in super structure complete as per drawing and M.O.R.D. technical specifications section 1000 and 1400 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per the directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 37 | Providing and laying mechanically mixed and vibrated for plain cement concrete in sub-structure using grade M-20 ( M-Twenty) designed mix with cement contents not less than 330kg (three hundred thirty kilogram) per cubic metre with 40mm (Forty milimetres) nominal size graded crushed stone aggregate as per drawings and M.O.R.D. technical section 800, 900 and 1200 including the cost of form work and curing complete in abutment etectra including carriage of materials with in all kinds of leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 38 | Providing and laying (to level or slope) 900mm dia (nine hundred millimetres) diameter reinforced cement concrete heavy duty non pressure pipes IS Class NP3 for culverts on first class bedding of granular material in single row including providing and fixing collar with cement mortar 1:2 (One cement : two sand) but excluding the cost of excavation, protection works, back filling, concrete bedding and masonry work in head walls and parapets as per drawing and M.O.R.D. technical specifications section 1100 and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender