Bids Are invited for Supplying And Installation Of Auditorium Chairs. Seat / Back: The Seat Sub-Assembly Is Made Up Of 1 , Supplying And Installation Of Auditorium Chairs. Tubular Frame Structure (I Frame) : The Understruct , Supplying And Installati
Tender Overview
Project Description
Bids Are invited for Supplying And Installation Of Auditorium Chairs. Seat / Back: The Seat Sub-Assembly Is Made Up Of 1 , Supplying And Installation Of Auditorium Chairs. Tubular Frame Structure (I Frame) : The Understruct , Supplying And Installation Grouting Bolts Chemical Anchor Stud M10x165mm , Chemical 345 Vesf - Chemical Tube For Grouting - Supplying And Installation Of Auditorium Chairs. Seat / Back: The Seat Sub-Assembly Is Made Up Of 1.2±0.1Cm Thick Plywood, Upholstered With Polyester Fabric Over Moulded Foam And Covered With An Injection-Moulded Polypropylene Outer Cover. The Seat Can Be Manually Tipped-Up When Not In Use. The Back Sub-Assembly Is Made Up Of Injection-Moulded Gass Filled Polypropylene Inner Upholstered With Polyester Fabric Over Moulded Foam And Covered With An Injection-Moulded Polypropylene Outer Cover. Both These Sub-Assemblies Arefixed To The Tubular Structure.*Back Size: 46.3Cm (W) X 59.0Cm (H) *Seat Size: 47.0Cm(W) X 49.5Cm(D) Note:• High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Is Moulded With Density = 45 ±2 Kg/M³ And Hardness Load For Seat 16 ± 2 Kgf And Hardness Load For Back 14 ± 2 Kgf As Per Is:7888 For 25% Compression.• Armrests: The Armrest Is Made Of Injection Moulded Pp Compound.The Armrest Is Mounted On A 3.15Mm Thick Hr Sheet Which Is Welded On The Tubular Frame.• Powder Coating: Steel Components Are Epoxy Polyester Powder Coated (Dft 40-60 Microns). Flooring Pre - Requisite : The Auditorium Chair Is Designed To Get Mounted/Grouted On Floors With Flooring Specification As Mentioned In Flooring Pre-Requisite Godrej Doc-No: Stg 129368Make: Godrej Interio
BOQ
| Sl. No. | Item Title | Item Description |
| 1 | Supplying and installation of Auditorium chairs. SEAT / BACK: The seat sub-assembly is made up of 1.2±0.1cm Thick Plywood, upholstered with polyester fabric over moulded foam and covered with an injection-moulded polypropylene outer cover. The seat can be manually tipped-up when not in use. The back sub-assembly is made up of injection-moulded gass filled polypropylene inner upholstered with polyester fabric over moulded foam and covered with an injection-moulded polypropylene outer cover. Both these sub-assemblies arefixed to the tubular structure.*BACK SIZE: 46.3cm (W) X 59.0cm (H) *SEAT SIZE: 47.0cm(W) X 49.5cm(D) Note:• HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45 ±2 kg/m³ and Hardness load for Seat 16 ± 2 kgf and Hardness load for back 14 ± 2 kgf as per IS:7888 for 25% compression.• ARMRESTS: The armrest is made of Injection moulded PP compound.The Armrest is mounted on a 3.15mm thick HR sheet which is welded on the tubular frame.• POWDER COATING: Steel components are epoxy polyester powder coated (DFT 40-60 microns). FLOORING PRE - REQUISITE : The auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite Godrej doc-no: STG 129368Make: Godrej Interio | Supplying and installation of Auditorium chairs. SEAT / BACK: The seat sub-assembly is made up of 1.2±0.1cm Thick Plywood, upholstered with polyester fabric over moulded foam and covered with an injection-moulded polypropylene outer cover. The seat can be manually tipped-up when not in use. The back sub-assembly is made up of injection-moulded gass filled polypropylene inner upholstered with polyester fabric over moulded foam and covered with an injection-moulded polypropylene outer cover. Both these sub-assemblies arefixed to the tubular structure.*BACK SIZE: 46.3cm (W) X 59.0cm (H) *SEAT SIZE: 47.0cm(W) X 49.5cm(D) Note:• HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45 ±2 kg/m³ and Hardness load for Seat 16 ± 2 kgf and Hardness load for back 14 ± 2 kgf as per IS:7888 for 25% compression.• ARMRESTS: The armrest is made of Injection moulded PP compound.The Armrest is mounted on a 3.15mm thick HR sheet which is welded on the tubular frame.• POWDER COATING: Steel components are epoxy polyester powder coated (DFT 40-60 microns). FLOORING PRE - REQUISITE : The auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite Godrej doc-no: STG 129368Make: Godrej Interio |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender