Tender for Tender for Nagar Van Khajuwala Solar Light Bagwan Hut Kurb Stone And Painting Variours Works Tender Invited
Tender Value
8.79 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
5 days left
EMD
17600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Nagar Van Khajuwala Solar Light Bagwan Hut Kurb Stone And Painting Variours Works Tender Invited
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil Room-Long Wall Room, Room-Short Wall Room, Bathroom |
| 2 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size), Room-Long Wall, Room-Short Wall |
| 3 | Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricksCement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 4 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Room-Long Wall |
| 5 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Beetween Rooms Cement mortar 1 : 4 (1 cement : 3 coarse sand) |
| 6 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mi, Long Wall, short wall |
| 7 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( as required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix / Design Mix |
| 8 | Providing and fixing in CM 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry : Size 125 x 100mm Mtr. 347.00 |
| 9 | Supplying and Filling in plinth with blown sand under floorsincluding watering ramming consolidating and dressingcomplete including cost of sand. |
| 10 | Flooring Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. In flooring |
| 11 | PlasterPlaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finish : Inner 12 mm thick -Room-1, Room-2, |
| 12 | -Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finish : Outer 20 mm thick |
| 13 | Ceiling --6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3- fine sand) |
| 14 | Distempering with dry distemper of approved brand andshade (two or more coats) and of required shade on newwork, over and including, priming coat of whiting to give aneven shade including all scaffolding. |
| 15 | Painting exterior Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding:New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 16 | STEEL REINFORCEMENT: Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five levelCold twisted deformed bars (IS :1786) |
| 17 | Centering & shuttering with plywood or steel sheets includingstrutting, propping bracing both ways with steel props andremoval of formwork for upto floor five level for : 1. Suspended floors, roofs, landings, staircases, balconies,girders, cantilevers, bands, coping bed plates, anchor blocks,sills, chhajjas, lintel, beam, plinth beam etc. |
| 18 | P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. Size 7.22.2 Size 300mm x 450mm, thicknes 7mm to 8mm Sqm |
| 19 | Providing and fixing 1st quality MAT & GLOSSYfinished ceramic tile confirming to IS : 13755 and IS: 15622 colour such as white, grey, ivory, fume redbrown, light green, light blue and other light shadesin floors, steps, pillars etc. laid on a bed of neatcement slurry finished with flush pointing in thewhite cement mixed with pigment to match the shadeof the tile complete (including the cost of cementmortar bed 1:4).Size Size 300mm x 450mm, thicknes 7mm to 8mm |
| 20 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' :Commercial Veneer both side |
| 21 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm |
| 22 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%] |
| 23 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to then metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 24 | Providing and fixing Square bars or other flat welded to window,ventilatiors etc. |
| 25 | Construction of Kerb Stone along Eco-Trail:- Providing and laying at or near ground level factory made kerb stone OFM-25 grade cement in position to the required line, lefvel and curvanture jointed with cement mortar1:3(1 cement:3 coarse sand) including making joints with without grooves(thickness of joints except at sharp curve shall not to more 5 mm)including |
| 26 | Solar lights complete set with pole and panel:- Supply, Installation,testing and commissioning of 20 W all inone Solar LED street light(IP 65 rated aluminium housing ) intergrated with 40 AH Life PO4 battary, MPPT charge Controller/ and PIR motion sensor(minimum 2 days autonomy), including the supply and anerection of a 6 meter Hot Dip Galvaized (HDE) steel pole with base platm anchor bolts and necessary civil foundation work octagonal, wall thickness 3.5 mm. |
| 27 | Painting exterior surface of Boundary wall with 100 % acrylic paint Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender