Tender For Provn Of 01 X Temp Storage Shed In ‘C Zone, Provn Of Sanitary Fittings At Bldtg No T-3 Of 3 Corps Omc, Provn Of Chequered Tiles Near Bldg No T-24/29A At 3 Corps Omc, Provn Of Drainage Sys Near Adjacent To Vehicle Washing Point And Connecte
Tender Value
43 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wokha → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 01 X Temp Storage Shed In ‘C Zone, Provn Of Sanitary Fittings At Bldtg No T-3 Of 3 Corps Omc, Provn Of Chequered Tiles Near Bldg No T-24/29A At 3 Corps Omc, Provn Of Drainage Sys Near Adjacent To Vehicle Washing Point And Connected Work At 3 Corps Zone Wksp, Provn Of 02 X Toilet Block And 02 X Bathroom Near P-716 Of 3 Engr Regt, Provn Of 01 X Toilet Block Near Earth Moving Plant Area Of 3 Engr Regt & Addn/Altn Of Sewage And Drainage Line Near Bldg No T-26 And T-27 117 Inf Bn (Ta) Guard
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and as directed. |
| 2 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | Excavation over areas n.exc 1.5m deep & getting out soft/loose soil complete all as specified and as directed. |
| 4 | Excavation over areas exc 1.5m deep & n.exc 3 m deep and getting out in soft/loose soil complete all as specified and as directed. |
| 5 | Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified ans as directed. |
| 6 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed. |
| 7 | M&L for Cement Concrete (1:4:8)Type D-2(using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 8 | M&L for RCC design Mix M-25 (using 20mm graded stone aggregate) as in foundation, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc basement slabs under reamed piles and mass concrete complete all as specified and as directed. |
| 9 | M&L for RCC design Mix M-25 (using 20mm graded stone aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 10 | M&L for RCC design Mix M-25 (using 20mm graded stone aggregate) as in beams, cantilvers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 11 | M&L for RCC design Mix M-25 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 12 | M&L for RCC design Mix M-25 (using 20mm graded stone aggregate) as in Chajjas. |
| 13 | Use and waste for formwork to chullah hoods, cha jjas, troughs and similar items in cluding edges complete all as specified and directed. |
| 14 | Use & waste of form work for sides of concrete foundation footing bases of column ,plinth beam and similar work flat rough finished surfaces of concrete complete all as specified and as directed. |
| 15 | Use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams complete all as specified and directed. |
| 16 | Use and waste of formwork to sides of pillars posts, struts, piers, columns and stanchions finished the suface rough complete all as specified and as directed. |
| 17 | M&L for form work with fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (horizontal or sloping) complete all as specified and as directed. |
| 18 | M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with complete all as specified and as directed. |
| 19 | M&L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with complete all as specified and as directed. |
| 20 | M&L for brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan exceeding 6 m mean radius, built in Cement Mortar (1:6) complete all as specified and as directed. |
| 21 | M&L brick work with sub class B bricks (using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed. |
| 22 | S&F factory made Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube,supplying and fixing in opening as per specification and drawing complete all as specified and as directed. |
| 23 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification etc complete all as specified and as directed. |
| 24 | S&F MS butt hings medium weight cold rolled 100mm size complete all as specified and as directed. |
| 25 | S&F 150 mm long aluminium anodised tower bolts complete all as specified and as directed. |
| 26 | S&F 100mm long aluminium anodised handles cast copper complete all as specified and as directed. |
| 27 | S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section)(300 mm long) complete all as specified and directed. |
| 28 | S&F for steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed. |
| 29 | S&F sheet glass, obscured or frosted 3mm thick and glazing with oil putty in squares. nexc 0.5 Sqm each complete all as specified and as directed. |
| 30 | S&F 150 mm long MS barrel tower bolts complete all as specified and as directed . |
| 31 | S&F MS handle 150mm long oval type complete all as specified and as directed. |
| 32 | S&F 300 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed complete all as specified and as directed. |
| 33 | S&F steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded complete all as specified and as directed. |
| 34 | S&F steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars devetailed or welded complete all as specified and as directed. |
| 35 | M&L of sand filling under floor well ramming including watering as required Spreading & leveling in layers n.exc 25cm thick complete all as specified and as directed. |
| 36 | M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface complete all as specified and as directed. |
| 37 | M&L for PCC (1:4:8) type D-2 , 75mm thick (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 38 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors laid over and including 15mm thick screed bed for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. |
| 39 | M&L for Glazed ceramic coloured tiles in vertical surface of size 450X 350X 7 mm,/350 x 250 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over and including backing coat of 10 mm thick in CM (1:4) complete all as specified and as directed. |
| 40 | M&L for 75 mm thick PCC (1:3:6) type C2 , using 40 mm graded stone agg in plinth protection/aprons/path laid to slope of 1:12, finished even and smooth without using extra cement with and including all necessary formwork to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed |
| 41 | M&L for steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and as directed. |
| 42 | S&F Plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment of Fe-410-W (Gde-E-250 quality-A) complete all as specified and as directed. |
| 43 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated trapezoidal steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 44 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 45 | M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer on new surfaces in any tint complete all as specified and as directed. |
| 46 | M&L for rendering 10mm thick in CM (1:6) on fair faces of brick or concrete work finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 47 | M&L for rendering 15mm thick in cement mortar (1:4) on brick or concrete work finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 48 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over and including a coat of primer complete all as specified and as directed. |
| 49 | M&L for preparation of new plastered or un plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint over and including a coat of primer complete all as specified and directed. |
| 50 | S&F 20mm bore GI water tubing medium grade laid in floors or fixed in wall or ceiling complete with GI fittings complete all as specified and directed. |
| 51 | S&F 15mm bore GI water tubing medium grade laid in floors or fixed in wall or ceiling complete with GI fittings complete all as specified and directed. |
| 52 | S&F 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, laid in trenches and jointed complete all as specified and as directed. |
| 53 | S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floor complete all as specified and directed. |
| 54 | S&F 75mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, laid in trenches and jointed complete all as specified and as directed. |
| 55 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and as directed. |
| 56 | S&F PVC (SWR) 110mm dia bends in any radius complete all as specified and directed. |
| 57 | S&F PVC (SWR) 110mm dia junction single T equal or un equal with an floor complete all as specified and directed. |
| 58 | S&F PVC (SWR) 75mm dia junction single T equal or un equal with an floor complete all as specified and directed. |
| 59 | S&F PVC (SWR) 75 mm dia vent cowl pipe complete all as specified and as directed. |
| 60 | S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 61 | S&F 110mm dia PVC (SWR) branch piece, single (single Y equal or unequal) complete all as specified and as directed. |
| 62 | S&F stack clamp,110mm bore made out of 50mm by 5 mm flat iron and 16 mm dia round stays including bolts and nuts and securing ends of stay to wall or roof complete all as specified and directed |
| 63 | S&F in repairs Vitreous china wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including PVC low level flushing cistern 10 ltrs capacity complete as directed by Engr-in-Charge. |
| 64 | M&L for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor with flush pipe with high or low level flushing cistern and connection to pipe complete all as per specified and as directed. |
| 65 | Cutting into exisiting manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching and forming branch channel, half round or 3/4 section in cement concrete (1:2:4) type B-1, smooth finished and reforming benching as required, internal dia of pipe 110/150mm complete all as per specified and as directed. |
| 66 | M&L for PCC (1:2:4) type B-2 (using 40mm graded stone aggregate) 100mm thick as in sub base complete all as per specified and as directed. |
| 67 | S&F 15mm bore bib tape cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 68 | S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 69 | S&F 15mm bore angle stop cock, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe complete all as specified and as directed. |
| 70 | S&F 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and 15mm bore 450mm long PVC connection all as specified and as directed. |
| 71 | S&F for PVC Connection pipe 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed. |
| 72 | S&F in repair Vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified and as directed. |
| 73 | S&F toilet paper holder, coloured vitreous china, box type fixed in wall complete all as specified and as directed. |
| 74 | S&F soap dish, vitreous china white, aprox size 160 X 160 X 90 mm. fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 75 | S&F Glass shelves, with 12mm thick desher glass incl CP brackets with brass nuts 300 mm long complete all as specified and as directed. |
| 76 | S&F mirror of size 450x600x5mm thick with aluminium frame and mounted on 6mm ply confirming to IS, with two Nos of hanging hooks fixed complete all as specified and as directed. |
| 77 | S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screwscomplete all as specified. |
| 78 | S&F CP grating 100mm dia PTMT with waste hole complete all as specified and as directed. |
| 79 | S&F CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 80 | S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 81 | S&F for vitreous china urinal, half stall type, white including flushing cistern, flush pipe and waste pipe,CP waste coupling complete all as specified and directed. |
| 82 | S&F 1000 ltr capacity rotational moulded polythylene water storage tanks double layer (cylindrical, vertical with closed top ),including provision of 20 and 25 mm dia spouts for inlet and outlet and connection including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20 mm - 210 gms) complete all as specified and as directed. |
| 83 | S & F of 20mm gate valve (brass insert) as per requirement of the site complete all as specified and as directed. |
| 84 | M & L Plain cement concrete (1:3:6) Type C-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 85 | M&L for plain cement concrete type B-1 (1:2:4) (using 20mm graded stone aggregate) as in water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 86 | M&L for brick work in cement mortar (1:4) with sub class 'B' bricks (using old size burmt bricks) straight or curved on plan exceeding 6m mean radius complete all as specified and as directed. |
| 87 | M&L for brick work with sub class `B' bricks (using old size burmt bricks) in one brick thick honey comb walling, built in cement mortar (1:3) complete all as specified and as directed. |
| 88 | M&L for loose filling with broken bricks aggregate of gauge 40 to 80mm in soakage pits, soakage wells complete all as specified and as directed. |
| 89 | M&L for PCC (1:3:6) type C-2 (using 20mm graded stone aggregate) as in coping including necessary form work complete all as specified and as directed. |
| 90 | M & L for precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in manhole cover slabs round square or rectangular in shape and set in CM (1:4) complete all as specified and as directed. |
| 91 | M&L for preparation of new wall surfaces and applying Three coats of white wash complete all as specified and as directed. |
| 92 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed. |
| 93 | S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 cm but n exc 30cm long and 16 to 20mm dia of neck complete all as specified and as directed. |
| 94 | M & L for on site NP-2 hume pipe of dia 1.2m with length not less than 2.5m septic tank for 10 users ,designed to carry sewage and sullage water, including excavation in any type of soil, PCC (1:4:8) below foundation, Vent shaft, connection etc. complete all as specified and as direced. |
| 95 | M & L for Soakage wells of size 1.8m dia x 3.0m effective depth, excavation in any type of soil,foundation in PCC (1:3:6), walls of honey combed masonry with top ring of M-25 Concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC Cover slab in M-25/ SFRC Cover, interconnecting pipes of RCC/DWCP Complete filled with and including brick bats complete all as specified and directed. |
| 96 | M & L for DWCPE(SN8) 180(OD)/163(ID) mm diameter Pipes laid in trenches as in sewage disposal with all fitting and fixtures complete all as specified and directed. |
| 97 | M & L for PCC (1:3:6) type C-2 (using 40mm graded coarse stone agrregates) as in concrete bed to DWCPE pipes 180(OD)/163(ID) mm diameter, including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. |
| 98 | S & F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed. |
| 99 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 100 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors laid over and including 15mm thick screed bed for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. |
| 101 | S&F one piece EWC with vibe sense duroplast slim seat cover and twin flush fittings 660x 350 x 745 mm (snow white) S trap 300mm and fittings complete all as directed complete all as specified and as directed. |
| 102 | S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick , fixed to walls with plugs & CP brass screws complete all as specified and as directed. |
| 103 | M&L for 2nd class hard wood scantling as in purlins rafters & framed work etc clean sawn complete all as specified and directed. |
| 104 | S&F wall hung premium ceramic white basin/vessel sink with premium rim for bathroom, oval shaped of size 480mm x 430 x 330mm half pedestal,complete all as specified and directed. |
| 105 | S&F 6mm thick frameless oval bevelled mirror, Edges grounded, size 24 x 26 inches, fixed with suitable rowal plug & screws complete all as specified and as directed. |
| 106 | S&F in repair CP toilet paper holder complete all as specified and directed. |
| 107 | S&F corner glass shelf assembly 250mm radius made of 6mm thick craaylic glass, with CP railing fixed with suitable rowal plug & screws complete all as specified and as directed. |
| 108 | S & F Vitreous China Urinal, full stall type, white including urinal spreader (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and as directed. |
| 109 | M & L for DWCPE (SN8) 150mm (ID) diameter pipes laid in trenches complete all as specified and as directed. |
| 110 | M&L for 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers finished even and smooth without using extra cement using water proofing compound @ 3% by wt of cement for finished even and smooth (without using extra cement) including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing with and including provision of GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and as directed. |
| 111 | M&L for 10 mm thick plastering in CM (1:6) on the other side of lathing finished even and smooth without using extra cement complete all as specified and as directed. |
| 112 | S&F of towel ring chromium plated complete all as specified and as directed. |
| 113 | S&F 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) non asbestos fibre cement reinforced multipurpose board, pre-painted self embossed, textured designer board E-Board Classic fixed to GI frame work with screws to be fixed in ceiling flat or sloping and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre both ways, size of grid 605 x 605mm fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and directed. |
| 114 | M&L for cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in surface channels and drain bed complete all as specified and as directed. |
| 115 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds complete all as specified and as directed. |
| 116 | M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in for coping, haunching and the similar work weathering slightly rounded or chamfered edges and throating including necessay form work complete all as specified and as directed. |
| 117 | Surface dressing n exc15 cm deep in soft/loose soil complete all as specified and as directed. |
| 118 | M&L for 100mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in floor complete all as specified and as directed. |
| 119 | M&L for chequered cement concrete tiles of size not less than 300x300x25mm thick laid over and including 15mm thick screed bed for laying floor finishes in cement mortar (1:6) etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and as directed. |
| 120 | M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in kerbs, plinth courses, string courses, parapets, bed plates and the like including weathering slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 121 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) ,finished even and fair complete all as specified and as directed. |
| 122 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) using water proofing compound @ 3% by wt of cement , finished even and smooth (without using extra cement) complete all as specified and as directed. Note:- (WPC will be measured and paid separately) |
| 123 | Supply only Integral water proofing compound complete all as specified and as directed. |
| 124 | M&L for 40 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone agg) as damp proof course to horizontal or vertical surfaces including necessary form works, applying evenly a coat of blown type bitumen at 1.50 kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm including 150 micron thick polythene film laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm complete all as specified and as directed. |
| 125 | M&L for PCC type B-1 (1:2:4) (using 20mm graded stone aggregate) 25mm thick as in subbase of flooring finished even and fair using extra cement complete all as specified and as directed. |
| 126 | M & L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed. |
| 127 | M&L for providing Machine cut ,mirror polished kota stone slab flooring 20-25mm thick over and including 20mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone floor/steps treads including rubbing/grinding and polishing complete all as specified and as directed. |
| 128 | M&L for rolled mild steel in , purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A complete all as specified and as directed |
| 129 | M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and as directed. |
| 130 | S&F factory made 30mm thick flush shutters, solid core construction, with plain MDF board exterior grade-1 complete all as specified and as directed. |
| 131 | M&L for factory made 35mm thick 2nd class hard wood Glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified and as directed. |
| 132 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and as directed. |
| 133 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.14 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. |
| 134 | M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 135 | Demolition and breaking up drain pipes (salt glazed, stoneware, AC or reinforced concrete/PVC pipe) set in cement mortar 150/180 mm dia fixed in any position complete all as specified and as directed. |
| 136 | Demolition and breaking up drain pipes (salt glazed, stoneware, AC or reinforced concrete/PVC pipe) set in cement mortar 100 mm/110 mm dia fixed in position complete all as specified and as directed. |
| 137 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. |
| 138 | Demolition of reinforced cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level and removal of rubbish from the site complete all as specified and as directed. |
| 139 | M&L for PCC (1:3:6) type C-2 (using 40mm grade stone aggregate) as in bed to 110/100 mm dia PVC pipes including packing under and haunching against the sides of pipes after they are laid and tested. |
| 140 | Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water complete all as specified and directed. |
| 141 | Carrying out manhole covers/gully traps of any type and any depth removing the sludge/solid content from the manhole/gully trap by manual/ mechanical method and also cleaning the sewage line of any dia and at any depth either by water pressure or by any other flushing or roding and other suitable means at the discretion of the contractor at his own arrangements so as to remove the blockage and making the sewer lines and manhole/gully trap fully functional to the entire satisfaction of Engineer-in-Charge also to remove the sludge/solid contents outside of defence land including covering with a layer of earth and repositioning of the RCC/CI cover slab all as directed by the Engineer-in-Charge in NE Zone.Note:The complaint shall be cleared/rectified to the complete satisfaction of Engineer-in-Charge within 24 hours. |
| 142 | Desilting of septic tank/soakage pit of any size, type and any depth and removing the sludge/solid content from the septic tank/soakage pit by manual/ mechanical method or any other suitable means at the discretion of the contractor at his own arrangements and make the septic tank/soakage pit fully functional to the entire satisfaction of Engineer-in-Charge also to remove the sludge/solid contents outside of defence land including covering with a layer of earth and repositioning of the RCC/CI cover slab all as directed by the Engineer-in-Charge in NE Zone. |
| 143 | Cleaning of blockage IWC, EWC, Wash Basin, gully trap, floor trap etc either by hand pump or by rodding or by any other means untill clear flow is observed all as specified and as directed by Engr -in Charge Please Enable Macros to View BoQ information |
| 144 | Cleaning of blockage IWC, EWC, Wash Basin, gully trap, floor trap etc either by hand pump or by rodding or by any other means untill clear flow is observed all as specified and as directed by Engr -in Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender